r/Acoustics • • May 07 '26

small studio covered in foam and panels but mid frequencies ring longer than bass - what am i missing here?

Post image
1 Upvotes

measured a small project studio last week and the numbers are confusing me. the room is maybe 150 sq ft, pretty heavily treated with a mix of foam panels and some thicker broadband absorbers on the walls. ceiling has cloud panels too. owner built it himself over the last year and says it sounds way better than before treatment

ran rt60 measurements and the results dont match what i expected at all. low frequencies (125-250hz) are coming in around 0.3-0.35 seconds which makes sense for a small treated room. but then 500hz and 1khz are longer - more like 0.42-0.48 seconds. above 2khz it drops back down to around 0.25 seconds

i would have expected the opposite pattern since most absorption materials work better as frequency goes up. like shouldnt the highs be the shortest and the lows be the longest in a room with typical foam and fabric absorbers?

measured it twice on different days with source and mic in different positions each time and got basically the same pattern so i dont think its a measurement position issue. the decay curves look clean not like theres obvious flutter echo or modal stuff messing things up

the owner insists the room sounds good and honestly when i was in there it didnt sound obviously wrong or ringy. but the numbers are bothering me because i cant figure out what would cause this mid frequency bump in reverberation time

is there some acoustic principle im missing that would explain why a treated room would have longer RT60 in the mids? or is this a sign something weird is happening with the treatment itself?


r/Acoustics • • Apr 23 '25

Watch out for spy boxes people

Post image
0 Upvotes

r/Acoustics • • Mar 03 '26

Heeelp please - noise issue

Post image
1 Upvotes

Hi acoustics experts, I’ve joined this forum desperately looking for some advice on an issue that’s driving me crazy. I really really need to get rid of this noise in my home.

We’re experiencing a constant low-frequency hum inside our house that comes from our neighbour’s domestic aerobic wastewater treatment system (SIMOP unit, installed 7 months ago). It's a septic tank which uses a Secoh diaphragm blower running 24/7, feeding a submerged diffuser (Aquaflex atd 63-750) in the aeration chamber. The tank is 2 or 3 m (7 to 10 ft) from our house, installed just below gound level with a concrete lid in the ground. The neighbours are nice and cooperative and want to get rid of the noise for us but we’re all at a loss.

Key observations:

•When the airline from the compressor is disconnected, the hum inside our house disappears.

•Lifting the compressor itself out of the tank did not improve the hum.

•The original diffuser was a long fine-bubble tube resting on the bottom. Replacing it with a 300 mm fine-bubble disc changed the tonal character but did not eliminate the hum. (It has also caused their septic tank to be less efficient and create odours)

•The hum is low-frequency, constant, and perceptible throughout much of the house (including upstairs). It feels more like pressure modulation than airborne noise.

•No clear evidence of ground-borne vibration (can’t feel anything when touching the floor).

According to my limited online research including asking chatgpt 😖, this suggests diaphragm blower pressure pulsations coupling into the tank water mass and exciting low-frequency resonance that transmits into our structure.

We are now considering installing a 3-5 L pneumatic air accumulator near the compressor outlet to reduce peak-to-peak pulsation before air reaches the tank.

Does this analysis seem consistent with pulsation-induced excitation of the tank/building? Would an inline air receiver of that size be expected to meaningfully reduce low-frequency structural/acoustic transmission in this kind of setup?

I absolutely hate listening to this hum all day including with my head on my pillow. Any advice very gratefully received. Thanks in advance


r/Acoustics • • Mar 03 '25

Get'n hit with this right now

Post image
0 Upvotes

r/Acoustics • • Feb 14 '26

How to reduce echo?

Post image
1 Upvotes

Just moved into a new home and this 6x10ft office has a ton of echo.

3 walls are glass. 8 ft ceilings. It is basically sound proof though when I close the door.

I’m seeking some solutions and links on what to buy and where to place them. I will add a rug but I was told to hang panels and/or baffles?


r/Acoustics • • Feb 02 '26

Help me soundproof a Church hall on a budget...

Thumbnail
gallery
5 Upvotes

Hi everyone. So I am helping out at this church and in general the space we are renting is great and functional enough for all our activities. The only problem is the sound in the space... We are about 10 meters away from a retirement village and our max sound on a Sunday reaches about 92dB, so we get a lot of complaints.

The hall itself is very reverberant and you can hear it was built for a pre-sound reinforcement era. The vocals travel well without any amplification not to mention the drum kit! The stage is basically a concrete box and the curtains we have don't help absorb anything.

We are also struggling to let the low-end (below 100Hz) travel beyond about 3 Meyers from the sub, it is boomy in the front and no low-end at the back, so mixing is a problem! (Personally I suspect that the hollow wooden floor isn't helping.)

And above and beyond that, we have a lot of audio leakage outside of the venue as mentioned earlier.

What can I do to improve this without having to use up 10 years worth of technical budget?


r/Acoustics • • May 29 '26

This is an image from some new software I am working on for audio.

Post image
0 Upvotes

I thought it looked neat, so I wanted to share! It is from a python script, and comes from analyzing sound from my new scientific audio recording program. This image is reduced, as the original was too big.


r/Acoustics • • Sep 06 '25

Why some rooms echo more than others

9 Upvotes

Some rooms just sound uncomfortable, and it usually comes down to surfaces. Bare walls, tiled floors, and high ceilings reflect sound like crazy. That’s why a room with a carpet or shelves full of books always feels quieter.

To fix it, people use things like acoustic wall panels, ceiling baffles, or textured panels. Companies like DECIBEL and others make versions that double as décor so it’s not just “studio foam” on your walls.

Anyone here tried panels at home? Did it actually improve the sound or just look nice?


r/Acoustics • • Sep 30 '26

Looking for 10 people to improve their listening setup this week

4 Upvotes

I am a software developer with a lifelong passion for making music sound its best.
A while ago I started looking into how AI could help improve listening environments - mostly by coincidence, but the results looked quite promising. What followed was almost a year of grounding it in actual physics instead of AI slop and by now I am quite happy with it. With the release of the Acoustic Assistant right around the corner, I am looking for around 10 people to give it a try with their own rooms this week.

The assistant not only simulates the low end of your room and finds the best spot for your speakers and listening position, it also explains any issues with your current setup and how to improve it - together with practical tests to fine tune everything to your actual room. It's built for recording / home studios - stereo as well as Surround/Atmos.

You'll get full access to the Acoustic Assistant for free - all you need to do is give it a try this week and provide brief feedback on how it went (Desktop browser required). As an additional thank you, you'll also get the treatment upgrade once it is available.

If you are interested, please enter your email address here and check the beta checkbox:
https://stacktune.com/acoustic-assistant

Update: all spots are filled, thanks everyone! You can still sign up and I'll let you know when it is released.


r/Acoustics • • Aug 08 '25

Need Guidance on reducing echo

0 Upvotes

Please see the attached video. I've a tv in a small living room and I face echo or not so good audio experience. I did some research and found acoustic panels as a potential solution. But when I called acoustic team they said that these panels would be needed for both tv and opposite wall. I didn't like that idea as it will not look good.

Second option I thought was soundbar but then that will also create the same problem I believe.

How do you think is the best way to resolve this?


r/Acoustics • • Aug 06 '25

Any of these items worth anything?

Post image
0 Upvotes

r/Acoustics • • Aug 01 '21

Might be a dumb question but would these these foam squares be usefull to treat a room? It's all have at the moment thought of putting them on the adjacent walls (of my monitors) and celing (maybe cuting them into specific shapes?).The foam feels a bit rubbery,that's all I can describe about it.

Post image
0 Upvotes

r/Acoustics • • Jan 13 '23

I think that the sub should limit some publications

0 Upvotes

It's common to read in this sub sub publications asking for advice on how to build your home studio, how to soundproof your room, or how to avoid disturbing your neighbor while playing the drums. It is also common to read almost commercial queries about absorbing materials or diffusors. I think everyone here knows that if you are serious about an acoustic treatment project you should have a professional evaluate your case. Asking for general and unspecific advice does not make any sense, and the sub itself loses its sense when filled with this kind of publications.


r/Acoustics • • Aug 19 '21

Neighbour has a Subwoofer mounted directly on the wall we share. Please help

0 Upvotes

Over 1 years i have been complaining to the managers in the building i live about neighbour who has a "Sound plank" with powerful subwoofer in it mounted on the wall that we share.

These morons keep using it even tho the leaders in the building told them to take it down or turn off the subwoofer.

Still they use it. Last weekend they kept using it until like 3 am and its making me crazy.

Is it reasonable of me to demand this guy gets thrown out?

I mean it shouldent require much of a intelligence to understand that mounting a subwoofer on the wall towards their neighbour is a bad idea


r/Acoustics • • Jan 19 '22

I want to soundproof a room and I have no idea where do I even begin.

0 Upvotes

I am looking for cases of soundproofing.
I need info like they built this room out of so and so, and it soundproofs like so and so.
So I would know what is there possible because I know absolutely nothing about it.
So I would at least know some approximations about is possible and how much money/effort it is going to cost me.


r/Acoustics • • Feb 12 '23

Is real world sound stereo or more than that?

0 Upvotes

Hello,

I was wondering if the sounds that we hear as human in nature / the real world (not sound that is played back via an electronic sound system) is stereo or if it is more than stereo like surround sound (?).

How would you define sound in nature in terms of the stereo field (if that is the right term for that)?

Thanks in advance.


r/Acoustics • • Nov 11 '21

Can someone explain if its normal with this kind of noise in a brand new Appartment condo? the noise if from the kid living next door running/Jumping on the floor on the same level as me

0 Upvotes

r/Acoustics • • Dec 19 '24

How the hell does someone listen to music at 50 db?

0 Upvotes

I don't know where to post this, so I'm gonna post it here, but basically I recently downloaded a sound level meter and I just discovered that the usual volume I listen to music ( is not super loud, usually slighltly more than half volume) reaches 80 dbs and beyond. So I turned down the volume at the very minimum but it still tends to bounce between 70 and 80 dbs. I don't know if this is a problem of the sound level meter's caliber, or just that music is always that loud.

I hope God that my hearing is not damaged after years of listening to music with my earbuds. I don't even listen to music super loud, but apparently it is. I though music was good for you.

What do you think about it?


r/Acoustics • • Jul 09 '26

Air Gap Shmare Gap

0 Upvotes

I see a lot of advice about how important having panels with open backs and mounted with an air gap is. Having an open back and mounting with an air gap is harder to work with and so involves more labor. It's dead easy to mount a panel on a wall, and pretty easy on a ceiling without an air gap. With an air gap is more challenging to mount and, IMO, uglier. If the total usable space in the room is the same--that is, if a panel must project into a room by X distance, comprised either of about 1/2 air and 1/2 materials or all materials--why not pick the easy way and mount it right on the wall? The materials are cheap, it's the labor that's expensive. Forget the air gap. Am I right?


r/Acoustics • • Sep 24 '26

I perceive upper harmonics as pitch and seem able to control them — what acoustic phenomenon could explain this?

0 Upvotes

I recently realized that I may be an unusually strong spectral listener. I can perceive upper harmonics in a voice as distinct pitches, rather than simply as timbre.

This seems to have shaped my singing naturally. I have a baritone-range fundamental, but I can sing melodies while deliberately changing the prominence of upper harmonics and resonances.

What is unusual is that I can do this while continuously articulating words and changing vowels, without keeping my mouth in one fixed shape.

I have also experimented with high-pass filtering my recordings. Even when much of the fundamental range is removed, I can still perceive the melody through the remaining upper-frequency components.

My current hypothesis is that I may have unusually controllable resonances somewhere deeper in the vocal tract.

If you encountered a voice like this, what acoustic measurements or experiments would you use to determine what is actually happening?

edit

The main point of my question is how this should be investigated acoustically. However, many people seem to be responding with their impressions of how my voice sounds rather than answering the actual question of what measurements or methods should be used to investigate it.


r/Acoustics • • Oct 30 '25

Will 200mm of rock wool be enough to soundproof a CNC router cutting wood?

1 Upvotes

Hi, I'd like to use one of these machines in an apartment without disturbing my neighbors. I know it's a stupid idea, but I'm not giving up. How effective would it be to make an 18mm plywood box inside another one and put 200mm of rock wool in between? Any ideas? Thanks.


r/Acoustics • • Jul 22 '26

How do I sound treat my closet

Thumbnail
gallery
1 Upvotes

Hello, I've recently got into music production and I wanted to turn my closet into a little home studio however, I do not know much about acoustics and I quickly realized cheap foam panels wouldn't cut it. If someone could please help me out with panel types and placement for my closet that would be greatly appreciated.


r/Acoustics • • Mar 19 '23

Introducing 2 audio-related subreddits!

2 Upvotes

Hi, I just want to let you know about my 2 subreddits. Here they are:

r/SurroundAudiophile is dedicated to surround sound music playback (rather than movies). We talk about hardware and music. This sub has been added to r/Acoustics' sidebar.

r/HighEndHiFi is about high-end (i.e., expensive) audiophile equipment. This sub is less than a month old but already has almost 200 members.

I would greatly appreciate it if you would check out either or both of these subs and share your thoughts, suggestions, or questions. Your feedback would be very helpful. Thank you!


r/Acoustics • • Dec 02 '25

How can I attach a speaker to my ceiling to intentionally disturb the upstairs neighbors?

0 Upvotes

Sorry that this post is unhinged, but I’m going insane. There has been non-stop banging for two hours. This is a repeat offense. I’ve tried banging on the ceiling to no avail. I have a JLab Jbuds party speaker and want to attach it to my ceiling and play it just loud enough for them to at least hear the vibrations while attempting not to make too much noise for the other neighbors. I’m considering covering 3/4 of the sides with some kind of sound proof panels and placing the fourth directly against the ceiling. If I can’t find a way to attach it, I’ll just hold it up for however long I need to. The plan is to loop something infuriating until they relent. I want to try being annoying back at them before I get management involved. Of course, this can’t be executed tonight. It’s for next time… and there is ALWAYS a next time.