Found a wet spot on my passenger floorboard. My 4 runner is a 2024 and only has 20k miles.
I Immediately assumed it was my sunroof drains and cleared them. They are flowing water perfectly fine as far as I can tell and draining outside. I checked the "filter" ends inside the vehicle in the front and they look super clean.
I dried the water and put everything back together. I then simulated some rain and poured water all over the windshield/sunroof and let it all drain, no issues or water.
This was all yesterday, I drove to work and it sat all last night with no rain. I remote start the vehicle before coming out once I get in I check the floorboard and there is another light damp spot. It is a small wet spot but also not dry.
I take all the panels out and when looking under the glovebox I found a piece of h/vac near the blower motor that appeared to be dripping slightly. Iβm not sure what the piece is called but I assume it is my culprit. I attached a photo and circled the leaking piece in red. The water seems to be dripping specifically from the gray foam/seal.
The only variable that has changed is that I put a coupler and hose extension on my evap drain line for the water dripping on the frame issue. I didn't think this could be it but maybe it caused some clogging? I think I will remove it just as a test for now unless I am led somewhere else.
Let me know what you guys think. Thanks!