r/18650masterrace
•
u/GuillotineTechnician
•
Sep 06 '26
r/18650masterrace
•
u/parametrek
•
Nov 08 '21
Buying 18650 batteries? Start here.
Let's begin with some sound advice:
Do not buy 18650s from Amazon.
Do not buy 18650s from Ebay.
Do not buy 18650s from Aliexpress.
Do not buy any 18650 above 3600mAh.
With those guidelines you'll avoid 95% of the scams and unsafe batteries out there.
Where should you buy them?
USA: If you are in the US we've got plenty of trustworthy vendors with good prices. I've compiled (and update every few weeks) all of their inventories into a single searchable list here. It includes Illumn (CA), Mountain Electronics (UT), IMR Batteries (TX), Li-Ion Wholesale (PA), Orbtronic (FL), 18650 Battery Store (GA), Aloft Hobbies (CA). There is also a special list for bulk OEM cells if you plan to assemble a pack.
Europe: the 2 best places are Nkon (NL) and Akkuteile (DE).
UK: 18650.uk, EcoLux, Fogstar, Fogstar Wholesale, Torchy.
Australia: Ecocell, Tech Around You.
Canada: Illumn and 18650 Battery Store are known for good shipping rates across the border. There is also 18650Canada.ca. (No relation to the defunct 18650Canada dot com!) However their prices and shipping are so high that its often less expensive to import from the previously mentioned US vendors. Some community members have also had good experiences with ecigarettes.ca. Rotorgeeks has a small selection but is well liked by /r/Multicopter.
Elsewhere: start with your regional electronics vendors or local vaping stores. Some chinese vendors that several community members have had good experiences with: Battery Bro, Queen Battery, PK Cell. As a last resort consider Aliexpress. But you'll have to do a lot of research to find a trustworthy vendor. (Someone might say "XYZBAT" is good. But there are 4 different "XYZBAT" shops on Aliexpress.)
If a vendor has any 18650s over 3600mAh then none of their cells are trustworthy!
Sept 2023 update: Vapcell has released a 3800mAh and 4000mAh 18650 now. If you see people selling them (and people we trust do sell them) don't be alarmed. However I do not recommend them. They came from an unexpected place: a 2nd tier chinese manufacturer called FEB. Vapcell has previously released some cooked up chemistries with extremely high capacities but very poor secondary characteristics. (The high capacity Vapcell K64 would self discharge in a few weeks. They quickly discontinued it.) There are a lot of unsafe and unreliable ways to boost the capacity of a cell. I suspect that FEB has done that.
Its a bit like how nobody sells a 10GHz CPU. Yes its possible to make such a thing but nobody in their right mind would.
r/18650masterrace • u/CatOne4513 • Jul 11 '25
Is this diy powerbank tsa friendly?
This is a diy powerbank i made to take with me on a trip since my laptop battery is dead its has a 5 port bms and the cells are in a 5s config also they are removable to be charged with an external charger but i want to make use i dont get it confiscated throught tsa
r/18650masterrace • u/jacoscar • Feb 06 '26
Volkswagen sells this battery for 260€
https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/battery/3g0915089/
It’s an SOS module backup battery. I think it’s just a pair of 18650, do you think there is anything more in it given the 4 wires?
r/18650masterrace • u/Scan-of-the-Month • Sep 25 '25
We CT scanned 1,000 batteries from 10 brands. Here are some of the hidden risks we found that can lead to fires and failures.
Read more about what we found here: https://www.theverge.com/news/784966/lumafield-x-ray-ct-scan-lithium-ion-battery-risks-manufacturing-defect
r/18650masterrace
•
u/mesh_you_up
•
Sep 25 '26
DEATH TO THIS! Fake 18650s in Aliexpress tool battery
I recently came across some tool batteries with fake 18650 cells in them. They weren't compatible with the tools they were supposed to be, so I decided to take them apart and harvest the ten 18650s.
To my surprise, when I opened it, I noticed half of the cells weren't even soldered. There was also insulating tape between the connecting nickel strips and the unsoldered cells, but I didn't include a photo of this. The unsoldered cells also didn't have any markings on their wrap, unlike the 5 connected cells.
Sensing something was afoot, I investigated further. First, with my multimeter, I tested the voltage of each suspect cell. Guess what? Zero volts. Since the cells were at zero volts and one end of each of the cells was completely disconnected, I realized I could measure the cell's resistance too. It could be another clue. To my surprise, it measured infinite resistance. The cells didn't even have connectivity through them.
Finally, it was time for destructive testing. Whatever these things were clearly was not a battery. And I was going to find out what.
I grabbed my pliers and squeezed a cell as hard as I could. It deformed a little bit, but not as much as a hollow tube would. "Uh-oh", I thought - "am I squeezing an actual battery?" I looked more closely to assess the damage.
As I moved the battery to inspect it in the light, I heard another clue - a distinctive "chhh" "chhh" sound. And I knew what it was immediately. It was sand. The "cell" was a legitimate 18650 metal housing, filled with sand to make the tool battery feel real.
It was a scam all the way down. The battery maker didn't get scammed buying these cells, they knew they were bunk otherwise they would have soldered them.
Anyhow, I scored five 18650s per battery and a fun story. Remember folks - trust, but verify!
r/18650masterrace • u/yiction • Jun 07 '26
this is hilarious
i remember seeing these a while ago at an airport and i saw this kiosk there this morning and i was like ... wait. that's literally just an 18650 with a charging port stuck on the end... and it's $35+ for a single one lol. Product placement, I suppose. This is certainly not an ad, and I have not tried one. I have slept for 3 hours on a plane and it is now the morning. Apologies for any incoherence, this post does not have a purpose or a point.
r/18650masterrace • u/OllyFunkster • Sep 06 '20
I converted my camera to run on hot-swappable 18650s with this handy dandy battery grip
r/18650masterrace • u/IceBlitzz • Jul 15 '25
18650-powered I made a briecase powerstation with 230v output and 1kwh capacity
7S13P with a 50A BMS and it can supply 1kw continuously. Also got a 300W charger.
Now I have proper power wherever I go. A small dream come true 😍
r/18650masterrace • u/PMLJL • Mar 28 '26
18650-powered My disassembled DIY solar powerwall
784 cells. 7S 112P. JK BMS. 4kw 24v inverter.
Ran for about 5 years but I was always a bit nervous about safety. I limited voltage to a max of 4.1v and min of 3.3v and never drew more than 2kw from the inverter but was still nervous. I kept the rack right at the garage door so I could push it outside quickly if anything exploded... dumb 😄
It ran off grid in my garage. Computers, lighting, fish tank and sometimes would drain excess energy into my EV which only draws 1.5kw during charging.
Was a fun project but wont reassemble again. LifePo4 next. About to move house and not sure what im going to do with them all
r/18650masterrace • u/Joyous0 • Nov 23 '25
A battery to light up your day [fun]
This battery displays it proudly. Self-awareness level 1000.
r/18650masterrace • u/astonishedplant • 21d ago
Latest and greatest battery for my eBike! (Technically 21700 cells)
Battery specs: 3.4kWh, 72V nominal, 45Ah, 140A continuous, 160A peak rated, 20s11p.
Made from SVOLT N21700CM cells individually tested and paired based on IR and capacity (I used an industrial 8-channel battery tester for capacity and the FNIRSI HRM-10 for IR testing)
Cells are welded in a hex pattern with 0.2mm nickel strip (first photo) with my AwithZ UF20B. Additional flexible bussing was soldered on top to decrease series resistance (can be seen in the second photo).
Each side of the internal cell frame is made from two pieces of 3D printed ABS-GF filament from Bambu lab bonded together down the center with ABS slurry. The outer frame is made from four dovetailed 3D prints using Fiberon ASA-CF06 from Polymaker which were bonded with a slurry of the same filament, acetone polished, and then matte 2k clear coated.
It uses a QS8 connector for main power output and a hooded XT-60 for charging. The third port on the BMS enclosure is for the JK BMS LCD that mounts to my handlebars :)
r/18650masterrace
•
u/Dry-Organization2554
•
May 22 '24
Dangerous My battery just built. spent the last 2months building it
r/18650masterrace
•
u/SpecialistChance7036
•
17d ago
DEATH TO THIS! I swear these batteries never fail to surprise me of their capacity
Bro like really 88500mah on a freaking 18650. These companies lie like crazy
r/18650masterrace • u/rrksj • May 28 '26
A gift has been bestowed upon me by the battery gods.
Any one have an idea of what I should do with them? I’m at a loss of words.
r/18650masterrace • u/Martini107 • Dec 15 '25
Demand for 32700?
Hi all,
Quick question about the market for 32700 LiFePO4 cells.
I have a full pallet from a bankrupt energy storage / power container company. These are high-quality cells made for battery packs, not consumer-grade.
Specs: • 32700 LiFePO4 • 3.2V / ~6700mAh (~21.4Wh) • Double threaded stud terminals (pack-ready)
Is there still good demand for this format? What’s a realistic bulk value per cell? Who are the typical buyers (solar, off-grid, marine, DIY, OEM)? Based in Netherlands
r/18650masterrace • u/jacoscar • Aug 11 '25
Why aren’t there any 5p battery holders?
I’m looking for a 5p cell holder so I can top balance 5 cells at a time using an external power supply. I can only find 1x, 2x, 4x holders, but not 5, why?
r/18650masterrace • u/la2ha_357 • 7d ago
battery info Cleaning salvaged Tesla 21700s is taking longer than getting them out
I’ve been taking apart a discarded Tesla Model 3 battery module to salvage some 21700 cells for future projects.
Getting them out was harder than expected because they’re glued to the cooling plates. After a few failed attempts, I made a simple tool that lets me remove them without visible damage.
But cleaning them is turning out to be the real pain. There’s glue on the sides, sometimes plastic stuck to the bottom, and little bits of aluminum left on the positive terminals.
I tried a heat gun, but it didn’t really help. Right now, cleaning one cell takes about 90 seconds. With roughly 1,000 cells in the module, that’s potentially 25 hours of cleaning.
The few cells I’ve tested showed around 4,400 mAh capacity and 13 mΩ internal resistance.
Has anyone here dealt with this kind of glue before? Any tips for getting it off without damaging the cells?
I also filmed the whole process if anyone’s curious: https://www.youtube.com/watch?v=zmWDIWCNjqk
r/18650masterrace • u/Arrays_start_at_2 • Feb 18 '21
Got tired of my headset not lasting a whole day. So I made it better.
r/18650masterrace • u/Space_Blank089 • Aug 17 '25
About to make the largest battery my eBike has ever seen
196 cells, to make a 13s15p battery, should give me around 50Ah of battery, not too bad