r/wheelbuild • u/Pixelwind • Mar 08 '23
Why do people invert the overlap of spokes further out? Doesn't that just make them rub together?
r/wheelbuild • u/Pixelwind • Mar 08 '23
r/wheelbuild • u/coolg963 • Oct 20 '21
Following car tire logic, my bike tires need to be replaced asap, cracks on the sidewall, no tread left. The bike is a really cheap used bike as-is from a shop, so I need to figure some stuff on my own out.
I don't see any sizes, etc on the bike rim, but on the sidewall of the tire I see (700 28) and (28 622). From some quick googling, it seems like the tire is 700mm dia and 28 mm wide? Is this correct? What would the 28 622 correspond to?
If I'm right so far, would the tire presented below raise any issues? I am in Canada, looking to commute during the winter, so I might as well as buy studded tires at this point. I couldn't find many options for tires this size and studded.
https://www.biketiresdirect.com/product/schwalbe-winter-tire-700c-hs-396?fltr=3755
r/wheelbuild • u/SLANGNVINYL • May 06 '22
alright folks whaddya use?
r/wheelbuild • u/velotom • Mar 07 '22
I've just finished my first rear wheel build and am happy with the results..... Or at least I was, until I went to put on the rim tape and I saw that there's a sticker on the inside of the rim that points to the drive side. You guessed it, that's pointing to my NDS.
When measuring for the build, I made sure the spoke holes weren't offset etc. and that the rim seemed otherwise perfectly symmetrical, so when building I just made sure the decals on the rim looked right and got going.
Is this worth rebuilding? I can't imagine what the difference would be, but the manufacturer obviously felt the need to point this out so it seems like there's probably something. The wheel seems perfectly fine; it's trued and seems ridable. While I enjoyed the process, I don't really want to completely disassemble the wheel and start again unless I have to.
If it's important, I'm using DT Swiss 350 hubs, DT Swiss competition spokes and using a velocity wheels https://www.velocitewheels.com/ 50mm (I assumed white labelled Chinese?) carbon rim brake rim.
Any thoughts on the reason for the directional rim, and should I be worried that its reversed?
r/wheelbuild • u/Helicase21 • Sep 24 '20
I'm looking to pick up some XT hubs (centerlock, QR) for a new gravel build and not sure who's carrying Shimano and shipping to the US these days. Any advice?
r/wheelbuild • u/[deleted] • Oct 16 '22
As you know, butted spokes are not as practical as straight gauge because they can't be cut to length.
Would it be reasonable to stock 300+mm double butted spokes (2.0-1.8-2.0mm) and cut and thread through the 1.8mm section when they are too long? (using a 1.8mm nipple)
r/wheelbuild • u/[deleted] • Aug 14 '20
r/wheelbuild • u/KruiserIV • Apr 17 '22
These wheels should support 230lbs rider. Ideally be deliverable in two weeks.
Any help appreciated.
r/wheelbuild • u/NanoBangz • Jul 30 '22
Need a 24×4 wheel with spokes and hub installed. Dm me thanks
r/wheelbuild • u/peteftw • Feb 20 '16
I thought it was going to be simple, but I haven't been able to find something that checks all the boxes. Here's my requirements:
36h
fits 1.25" tire
mid level quality. Not budget, but obviously not zipps. It has to carry a 300lb tandem team and an 80 lb bike... But it's a cruiser.
Would be nice:
polished
Velocity
It will be paired with a single speed coaster hub (undecided, was leaning towards sturmey Archer or shimano)
Open to everything, thanks for your help.
r/wheelbuild • u/101010Lord101010 • Apr 08 '22
r/wheelbuild • u/dventr • Jul 26 '16
Hi,
I'm gathering components to build a Surly Troll, and I've got everything figured out, except for the wheels. So much too look out for! I just want affordable wheels which match my build.
So I've got no thru axles and my rear cassette is an 11 speed. Can anyone help me get started?
r/wheelbuild • u/Janchi • Nov 15 '22
Hello, I'm building my first proper wheel, it's a Mavic CXP Pro rim with an older Campagnolo hub. Lacing didn't pose any real problems for me, the pattern looks correct. The trouble started when I tried to tension the wheel. I zeroed all the spokes to be just in the nipples with the whole thread and then turned them all the same amount. My goal is about 105-110 kgf. Unfortunately, I have only a cheap tensionmeter at hand, a copy of Park Tool TM-1 made by X-Tools. I had a lot of trouble getting all of the drive side spokes to the same tension, some were a bit off from the suggested 20% deviation. The non-drive side was even slightly worse. In the end, I tried to tension individual spokes, which evened the tension out a bit, but it also increased overall. Is there anything I could do better to get a more even tension distribution? In the end, I wasn't particularly happy with the result, but I was getting frustrated so I moved to lateral truing. I was quite surprised how bent the wheel was, given that the rim and spokes are completely new. Maybe it's because I tensioned the individual spokes? Also, the wheel was noticeably off to one side. Could it be, that the wheel is strongly out of dish? I trued it for a bit, but then I gave up, feeling that this can't be right. Moreover, how I'm supposed to guarantee the tension distribution, if I change it by truing the wheel? I want to build a reliable wheel, but now I'm just worried that I'l break something. Any help would be greatly appreciated.
r/wheelbuild • u/TH1813254617 • Jul 18 '19
r/wheelbuild • u/strokyl • Aug 22 '19
Hi everyone,
I am starting thinking about building myself a pair of road-wheel.
Because I like to ride with a lot of elevation, I want something light and it look like KinLin XR-200 is really a good rim with a light price.
My weight is between 61kg to 64kg.
For spoke, I was thinking about something such as 24 (cross 1)/28 (cross 3 DS, cross 1 NDS) with Sapim CX-RAY.
Front hub: bitex raf10
Rear hub: either powertap G3 or bitex rar9 (I am currently looking at the second hand market for powertap hub).
But because I am really new to wheel building, I am really unsure about my spoke number cross pattern choice ?
Also, if anyone have some other suggestions for RIM/HUB I am open-minded.
I have just build a flip-flop wheel therefore and plan to build a cheap back rear wheel to train myself before this expansive project.
r/wheelbuild • u/1speed • Jul 16 '21
Looking to build a 2nd set of wheels for my CX bike. The first pair I built using the same brand of hub and rim, laced 32h 3x, left 2mm of clearance between the NDS spokes and the rear disc caliper. This time the hub is 28h and I don't want to risk the NDS spokes rubbing the brake. Looking at lacing it 3x on the drive side and 2x on the non-drive side to ensure clearance. Thoughts?
r/wheelbuild • u/[deleted] • Nov 15 '20
So I had an idea and I'm wondering if anybody has seen a source where somebody has tried this. I have actually seen some unusual lacings like this (ie. mixing radial and 3x lengths) mentioned in regards to building wheels for big hubs (mostly e-bike wheels) ie. on Sheldon's site, but I'm wondering if anybody has ever pulled off something like this on a normal sized hub.
So here's the idea: what if I laced my hub so the load bearing spokes (opposite on gear and disc side) were laced with approximately 4x length spokes, then the supporting spokes were around 2x in length? So one would probably start by lacing 4x opposite directions on the hub so the gears and disc would be pulling directly on them, and then you'd go around and fill in the remaining holes with whatever length is optimal, I'm thinking around 2x length. My thoughts here would be a mix of torsional stiffness where it matters, with some extra lateral stiffness to balance things out. What would the optimal length of spokes be for this? How would the spoke tension work out, would the wheel explode under normal riding?
r/wheelbuild • u/[deleted] • Jun 26 '16
Hi everyone!
My wife allowed me to spend more on my first wheel build. Yay! Dura ace 9000 hubs, and two Chinese 700c 25mm deep 50mm carbon clinchers (ERD 540) are already on their way.
The thing is, every site has different flange diameter and distance measurements for the hubs. Does anyone have dimensions that work? I'm getting spoke lengths that differ by 261-263 (for the front with spoke cross x2) otherwise.
Help is much appreciated.
Thanks!
r/wheelbuild • u/aminulahsan • May 30 '15
I ride a CX bike, Saracen Hack 1 to be specific. Hubs are not performing well, making noises, lesser rolling etcetera. So I was thinking of upgrading the wheels, but I don't want to spend much on the wheels. I can spend around $250 max (preferably less than $200) for the wheels. So what should I do? I can just get some mtb hubs for cheap.. But should I build the wheels? What rims should I go for? And hubs? Complete noob when it comes to wheel building.. So help me with your advices. Thanks in advance 😊
r/wheelbuild • u/6GoesInto8 • Aug 25 '18
I am building a set disc wheels for a surly bike(big tire clearance) and I was thinking that without rim brakes I could intentionally offset the dish to even out the spoke tension across the 2 sides.
If I offset the rim by ~2mm would this help with the tension much? Would it have any consequences on handling and wear of the tire? What if I did the same offset front and rear?
r/wheelbuild • u/teamtwowheels • Oct 09 '22
I got a great deal on a single speed with H Plus Son Archetype custom wheels. I want to use this as my do it all everything bike and I wanted to put some GP5000 tubeless on them but I know the rim isn’t tubeless. I’ve heard before that converting a non tubeless rim is possible with just more tape for a good seal. I would likely just ask a local bike shop to do this so I don’t mess it up. But I’m wondering if it’s even possible and if a bike shop would even consider trying it.
r/wheelbuild • u/ShartStainAppraiser • Jan 31 '23
Like title says, has anyone else soldered spokes? I know the theory is supposedly debunked but I'm not convinced with the test methodology. The experiment boiled down to adding compressive forces to a rim and measuring spoke deflection, it was not at all a dynamic test.
So anyway, I messed up my spoke length calculations on a 3x 3spd coaster brake build and laced it 2x and then soldered the spokes.
How long do you think I have before it fails?