r/watercooling • • Apr 20 '25

Guide Do NOT use Distilled Water for your Water Cooling Loop

Thumbnail
youtube.com
227 Upvotes

r/watercooling • • Nov 27 '23

Guide How to find compatible blocks for your hardware

258 Upvotes

Sup folks. So, finding compatible blocks has always been a royal pain, especially for newbies. Lots of different manufacturers, many of whom are unfamiliar to folks who aren't already watercooling and they don't all make blocks for every GPU model.

Fear not. iln (one of the Discord mod crew) has been working tirelessly to put together this new tool to help you find what you're looking for and assemble a loop list. You can even import your list from PCPartPicker.


r/watercooling • • 3h ago

Build Complete First Custom Loop

Thumbnail
gallery
18 Upvotes

I'd be lying if I said I didn't run into many problems finishing this build but for my first loop I'm extremely happy with it. I got most of the parts from TitanRig other than the fans and some other miscellaneous parts.


r/watercooling • • 13h ago

Cerakoted nemesis gtr 360

Thumbnail
gallery
33 Upvotes

I had ordered a blue one a couple years ago because I was new to pc stuff and thought a blue rad looked cool, I wanted it black but wasn't sure how to go about it so I asked a buddy of mine if he could cerakote it and this is how it came out!


r/watercooling • • 11h ago

Free 3080 TUF water lock

Post image
22 Upvotes

Title says it all, you pay for shipping and it’s yours! Coming off my old 3080 that will be air cooled in my girlfriends pc


r/watercooling • • 1d ago

The case arrived today. No lan parties with this one

Thumbnail
gallery
225 Upvotes

I don't have a clue how to bring this to 2nd floor. The whole package is 123 kg, 271 lbs


r/watercooling • • 11h ago

Z490 Optimus Waterblock for free

Post image
10 Upvotes

Same as the 3080 TUF block, pay for shipping and this is yours. Coming off old parts that is being used for an air cooled build for girlfriend.


r/watercooling • • 1d ago

Build Complete First watercooled build complete

Post image
152 Upvotes

Wonky tubes all around but it works and I’m happy for the time being, got some cable management left and I might dye the coolant but I’m resting easy for now.


r/watercooling • • 1d ago

Ooops now I know why my Tempos where so high

Post image
68 Upvotes

Freshly installed Heatkiller IV Ultra on 9850X3D was sitting at 70c without any load.


r/watercooling • • 1d ago

Build Complete-ish

Thumbnail
gallery
93 Upvotes

Had a lot of great feedback from y'all on my parts list, and completed the build very late last night! The GPU temps are better than I could have imagined, and I can finally use my side panel!

The radiator is secured to the wall with a furniture safety strap on some 3d printed feet. But probably going to move it somewhere else

I'm still planning to add some 90 degree adapters as well but I didn't order enough.

Dual 3090s pulling 420 watts each stay at around 40 degrees, with the fans and pump at 50%


r/watercooling • • 6h ago

Water Cooling is Not for me.

Post image
0 Upvotes

I first water cooled 20+ years ago with a full on aquarium/industrial pump pushing through a block with push on fittings on my Socket A system, pouring into a bin through a pop can with holes in it. I achieved the literal highest clocks on a barton core back in the day on budget ram. But I went through almost a half dozen motherboards all supplied by newegg RMA (rip paul, think he was the RMA guy back then). But he saved my crazy arse because it's all I had.

10+ years ago I decided to watercool my 7700k + 1070 and repeated hardware and cooling hardware was the same theme. Whether that was a failed x99 system; dual R380 blocks that didn't fit my gpu's or the realization that the small hardline tubing I had was way to small for a full tower.... I ended up with literally a 100% new system from when I started.

This time around, I figured that since the biggest drawback of water cooling was upgrading the system and paying the WC tax for a new block.... why not put that budget into a better air cooled version? Well with components getting exponentially more expensive as the day's go on, I realized that chinese component's were actually affordable and a complete platform upgrade could be as simple as a new gpu block (assuming AM6 is backwards compatible).

My first problem was that I had a very restrictive cpu block that I didn't realize clogged immediately. I replaced everything but the rad's and gpu block.... not realizing the distro plate wasn't the issue. I even replaced the tubing with glass and the fitting's as well because the triple o-ring fitting's... while they sealed nicely never "told" me the tube was entirely inserted tactily.

I've spent enough to have another moderate system, when I include the case, fans, gpu riser etc etc also with the double spend on parts.

My point is that water cooling for me is never quick and easy, rather I have the "I've gone this far and can't stop now" mentality.


r/watercooling • • 1d ago

Troubleshooting Small amount of grainy buildup on the outside of res/pump?

Post image
4 Upvotes

I had some issues several months ago with some bad parts that I have since replaced and it's been smooth sailing ever since. However, yesterday I looked over and saw this where the reservoir screws into the pump (Aquacomputer d5 next). After wiping it off, it feels very sand like. The filter in the pump is almost squeaky clean as can be seen in the pic, and there's no visible buildup anywhere else, and no leaks that I've been able to find. Not super worried at the moment since I'm not detecting any real issues, just confused on what this might be. Coolant is also aquacomputer's clear dp ultra, alphacool radiators.


r/watercooling • • 2d ago

Discussion Clean those water blocks, how often do you clean yours?

Post image
32 Upvotes

I do a fluid change (clear) every 6 months and this was my first strip down after 18months. And the build up is nuts! Anyways cleaned the whole loop out, PTM7950 for all of the GPU and CPU. Let’s see how this goes.


r/watercooling • • 1d ago

Question How do you apply PTM?

3 Upvotes

I want to apply Thermal Grizzly PTM to my GPU. I got the last available one in my area, so I can't afford to mess it up.

This is my first time applying PTM.

Any tips or anything I should be aware of? I keep reading about putting it in the refrigerator or even the freezer beforehand?


r/watercooling • • 3d ago

Build Complete My poison ivy hardline is done! What do we think?

Thumbnail
gallery
124 Upvotes

r/watercooling • • 1d ago

Troubleshooting Separating the RTX 5090 PCB from water block

0 Upvotes

I am currently repasting my Astral 5090 which is mounted on an EKWB water block, but I can't get the PCB off the water block.

Please help, I'm kinda panicking right now.


r/watercooling • • 3d ago

Final monitor #3 water cooled

Thumbnail
gallery
478 Upvotes

With the process this time!


r/watercooling • • 2d ago

Build Help 7900xtx nitro loop

Post image
4 Upvotes

Other than tubing do I have everything here for a loop for my 7900xtx nitro. It's been almost 20 years since I did a loop of any kind if you recommend different parts or something, please let me know I'm open to all options.

Fyi I have fans


r/watercooling • • 3d ago

Build Help Does anyone have Bykski B-CE-X? Need some advice.

Thumbnail
gallery
6 Upvotes

Debating buying this for an open case build but just wondered what the max psu length is? Spec sheets say it’s 180 but it looks like it could accommodate 200 at least


r/watercooling • • 4d ago

Monitor #2 water cooled now too

Thumbnail
gallery
548 Upvotes

Got my second PG27UQ water cooled now, with before and after temps: 75C down to 31C, and silent now. One more monitor to go.


r/watercooling • • 3d ago

It’s cold today 🛸

Post image
29 Upvotes

r/watercooling • • 4d ago Bravo

Build Complete Project:Celeste

Thumbnail
gallery
431 Upvotes

Ever since the previous T1 build (which should be posted on this sub as well) there were many aspects of the build I was dissatisfied with and thought could be improved, which led me to design my own case from scratch, bypassing all the case-inherent issues that couldn’t be fixed simply with a few mods.

The case is the Project:Celeste which sits at 10.4L (230x135x335). Its construction consists entirely from machined anodised aluminium 6061 which has allowed for the elimination of most visible screwholes for a clean exterior aesthetic. Many other parts were also designed and fabricated specifically for this build, including the custom back-connect monoblock with black nickel-plated internals, replacement NVME/VRM heatsinks, cable channels, and distro plate.

One standout feature of the case is the ability to shift the spine to a mere 28mm of cooler clearance which provides for a massive maximum GPU chamber thickness of 85mm- this provided enough space to fit an Aquacomputer Ampinel for per-pin monitoring and load balancing, which would prove impossible in most other SFF cases that utilise a sandwich layout.

In addition, I’ve also installed various other supplements including a Highflow NEXT for flow, coolant temperature, and conductivity measurements, as well as the fans and DDCZero pump being controlled via a Quadro integrated into the front panel. Despite that, coolant temperatures are monitored in 2 other locations which provides a comprehensive understanding of how the loop, as well as a separate thermistor probe that monitors the ambient temperature. There’s also an inline mesh filter to keep any radiator debris or otherwise from the blocks and ensure coolant quality. A hot-swappable NVME adapter (via USB4) also sits behind the storage which makes up for only having 2 NVME slots on this motherboard. Another massive QOL improvement I implemented was a radiator quick-mount system which eliminated most of the hand cramps putting everything together using extendable fittings to mount and seal the radiator directly to the distro plate. The rear panel also includes QDT4s for integration with an external MO-RA and a 4-pin XLR that can provide power to external 5v/12v devices (fans, rgb, etc). Of course, the system is fully featured with an internal DDCZero and 240 radiator which means it will run entirely independently in a pinch, as should be standard of these builds.

System Specs

CPU: R9 9950X3D2
GPU: MSI 5090 Gaming Trio
RAM: 2x32 6200 CL36
Motherboard: STRIX X870I
Storage: 2x SN7100 2TB, 1x NV7000-T 4TB
PSU: Corsair SF1000

(yes I pasted my description from my other post word for word)


r/watercooling • • 3d ago

Can I test GPU/w waterblock only for POST ( few seconds)

5 Upvotes

My other parts won't arrive until next week but my GPU waterblock for my 5080 came early. I have the waterblock installed with thermal paste applied. I just want to very that everything is working properly and the GPU is fully functional. Could I just install it in my pre-existing system just to see if it would POST just for a few seconds or is it not worth the risk and just wait for the loop to be installed?


r/watercooling • • 3d ago

Discussion Ek opinions?

7 Upvotes

I see alot of people boy cott them and alot of other people dont care, from my understanding they didnt pay their manufacturers or employees or someone but as a whole has the community forgiven them or not?

Generally just want to hear others opinions👍