r/typewriters • • 56m ago

Inspiration Post My little getaway spot

Post image
27 Upvotes

Just the first of what will probably be many for my getaway spots


r/typewriters • • 3h ago Regret

Inspiration Post Fixing eBay shipping damage to an Electra 110.

Thumbnail
gallery
9 Upvotes

Bought this Electra 110 on eBay because lately I am in love with Smith Corona electric typewriters but also noticed from the listing photos it had their techno/cubic typeface, Classic Pica #85. So naturally because it had a desirable typeface the eBay seller didn’t bother to latch it into the case (or put padding in the case) and it arrived quite damaged from bouncing around inside.

Damage:

-One of the carriage release levers was snapped off
-Both margins sets were knocked off, one was shattered

-The top cover was pushed in somewhat so that it partially tore the aluminum nameplate off and the 1/! slug was striking it
-Front body shell dented in so spacebar was impinged
-Spacebar partially dislodged after being pushed up by the bent shell
-The letter L typebar was completely disconnect from its linkage, linkage bent into a curve
-Carriage stop bent, margins not catching and overbanking on both left and right

So firstly removed the entire shell and and set about cleaning the machine up; mineral spirits and air compressor blast. After that I reattached the linkage for the letter L which is blessedly easy on these Smith Corona portables. The shell was easy to straighten out, laid it on the carpet and went at it with a hammer from the inside until it was back in shape. Top cover was straightened out by simply pulling upwards on it with sufficient force until the 1/! no longer struck it. The nameplate I ended up having to remove entirely, straighten/ flatten back out, and then glue back onto the keylever mask. Carriage release and margin buttons were replaced from my spare parts pile. Spacebar was not amenable to my home made ABS cement so I re-affixed it with a dot of superglue gel to the lever. The margins not engaging turned out to be the carriage stop being bent towards the back of the machine somehow, ended up taking the back off of another Smith Corona carriage to watch the parts move. Stuck a big flathead screwdriver onto it and gave it a nice thump to form the metal back to the right shape. Lastly, removed the power cord which was electrical taped in several places and replaced it with this nice new fabric-sheathed one. During work 2 cephalexin (keflex) pills fell out of the typewriter. Then she went back together for letter writing duty.


r/typewriters • • 6h ago

Repair Question "Tis the Season

Thumbnail
gallery
7 Upvotes

Nekkid while I troubleshoot, adjust, and clean....

In this case, the knob is a clue, not the most pressing consequence.

I'm ready to get back to fully Blue, but appreciate the access and visibility meantime.
And once again, having a another of the same model with which to compare is proving invaluable.


r/typewriters • • 7h ago

Repair Question Gear meant to rotate platen is not connected to the platen (manually rotating it works fine)

7 Upvotes

r/typewriters • • 7h ago Heartwarming

Repair Question First typewriter

Post image
31 Upvotes

So...how do I make this work? The arms kinda stick and I am missing the inky-thing. How to clean and grease it up?


r/typewriters • • 8h ago

General Question Does multi-strike mean what I think it means?

3 Upvotes

Looking to get some replacement tape for an electronic typewriter I recently acquired. It had the manual, in which was a list of tapes you can buy. This is one of those. Anyway, does multi-strike mean i can rewind and use multiple times? or am I misinterpreting based on what I want 😂 ? the current cassette is single use, and just ran out :/


r/typewriters • • 8h ago

Inspiration Post Can you hear the difference?

Thumbnail
youtube.com
4 Upvotes

I'm having so much fun pulling in my production world into my typewriter world!

This is the newest iteration of my setup for recording typecasts. It's all gear I already own but I'm putting more experimentation and time into it. Do you like the change? Do you not hear it? What are your thoughts?

Since it's stereo, it's best if you use headphones or have speakers separated by a few feet. You can turn your phone sideways and should notice the left and right speakers are slightly different but then the image gets very small (since it's a vertical video).

Thanks for your input!


r/typewriters • • 8h ago

General Question Is this beauty worth it?

Thumbnail
gallery
9 Upvotes

Fair price?


r/typewriters • • 10h ago

Inspiration Post Paid $15 for an Hermes 3000...with Swedish keyboard

Thumbnail
gallery
27 Upvotes

Not sure about the prices in Sweden, but I am happy to join the community. Wanted a typewriter since the 90s!


r/typewriters • • 10h ago

Inspiration Post Jimmy Carr on the affordances of typewriters as distraction free writing tools

Post image
26 Upvotes

There's even a saying about writing: don't get it right, get it down. You can edit later—you have a delete button on your computer, this is why computers are better than typewriters (also they're much lighter, and you can't look up 'lesbians taking milk showers' on a typewriter).
—Jimmy Carr in Before & Laughter (Quercus, 2021)


r/typewriters • • 11h ago Heartwarming

Inspiration Post An ode to the 5-series

Thumbnail
gallery
68 Upvotes

1952 Silent I picked up at an estate sale for $25. In great shape! For the money, I agree with Tom Hanks that these are the best option for someone looking for a mid-century typewriter to actually *use*. I have a Clipper, Sterling, and now this Silent and I love ‘em all!


r/typewriters • • 12h ago Heartwarming

Inspiration Post OK, Y'all Were Right re. the Smith-Corona 5 Series.

17 Upvotes

After hearing about how great the SC 5 Series is, I picked up a Sears Tower Challenger from the 1950s on Ebay for peanuts. I unpacked it, set it down, had a good look at it. It looks exactly like a SC Clipper from that era, grayish/tan body with green keys, but has the Tower/Challenger branding.
I blasted the segment with my NuTrol Control Cleaner (promoted by the late Duane from Phoenix Typewriter), hit it with the air can electronics duster, wiped off the body with a cloth, and then I popped a purple ribbon in. (Easiest ribbon install I've ever experienced, btw, it took 10 seconds tops.)

I started typing, and immediately thought, this is it, I can probably get rid of most of my other typewriters. It wasn't perfect (I have to hit the keys just right to avoid ghosting, which is something I haven't experienced on my Royals and is likely due to the hard platen), but it was close. The letters are perfectly aligned, the type is shockingly clear. I don't need a backing sheet; in fact, it does better without one, even though the platen is hard. The paper feed has no guide, yet the paper went through perfectly straight. I typed three letters in an hour, and enjoyed the experience the entire time.

A few observations -

The keyboard on it feels like it is positioned quite high compared to the Royal QDL, and makes me think if I use it a lot (which I will) I may need to get a lower typing table to avoid wrist issues. (I've been using my kitchen table, which is fairly high up.)

The "action" of the keys is very smooth. They make a big deal in the manual about the "piano action," and I guess they were right. It's very easy to type on.

In general, it feels different from my SC Galaxie Twelve made several decades later. The latter is fine, but I never have the urge to type on it for any extended period, it's basically a functional machine. This is somehow fun, though it's difficult to explain the difference.

Would be curious to know if there are any noticeable differences between Sears rebrandings and SC products, or what people think of their Sears machines.

Thanks to all again for the suggestion!


r/typewriters • • 12h ago Bravo

General Question Nice stationary for use with typewriter?

7 Upvotes

My boyfriend recently bought a typewriter that he's in the process of restoring. I would love to get him some nice stationary, or something fun or unique, to use once he gets it up and running. Any suggestions? I've seen on some of the threads and forums that regular copy paper works fine, but I'm hoping to find something a little different that he can use for special notes and letters, and that he wouldn't go out of his way to buy for himself. Any suggestions are appreciated, thank you!


r/typewriters • • 12h ago

Repair Question Need help with this one screw on a Royal Quiet De Luxe (1940s)

Thumbnail
gallery
2 Upvotes

Hey all!

I’m working in taking apart my first typewriter and I’m documenting everything and bagging every screw with photos and descriptions of where they came from.

My issue is this ONE screw holding the cover over the spools. I got the other side out with no problem but this one seems like it is stuck. I have tried penetrating oil and I have tried many bits from my Weaver kit. I’m stumped.

What would you do?


r/typewriters • • 12h ago

Inspiration Post Thank God I have a Time Machine! I just went back from 1985! Olivetti Lettera 35i

Thumbnail
gallery
25 Upvotes

r/typewriters • • 12h ago

General Question Three Antique Typewriters

Thumbnail
gallery
5 Upvotes

My dad has these three Typewriters. He is getting ready to move and have an estate sale. Any value here?


r/typewriters • • 13h ago

Repair Question drawband repair

2 Upvotes

does anybody know if it’s hard to replace a drawband on an underwood typewriter?


r/typewriters • • 14h ago

General Question First-Timer

7 Upvotes

Hello!

I've been a writer for most of my life and am finally collecting my various works. I would love to finally make the leap to a typewriter - a dream of mine. Could anyone recommend where to get a reliable piece for an obtainable price? Thank you in advance!


r/typewriters • • 14h ago

Repair Question Zinging Carriage, Olivetti MS 25 Premier Pro

5 Upvotes

Hey there,

I'm super new to typewriters, i found this one on fb marketplace and decided for $30 i could fix it up. I've bought a typewriter bible from typewriter database, and so far I've noticed that the carriage release is super loose, basically it will zing all the way left unless i hold the carriage release arm in all the way. When i do i can see it engage the gear under the carriage, and the carriage advances with each key press. When i flip the typewriter over, i can see the engagement move along with the carriage, only When the carriage release is pressed in. Is there a way to tighten/maneuver the carriage release or is this more likely an engagement issue?


r/typewriters • • 16h ago

Inspiration Post Panasonic KX-W1510 from 1989

Thumbnail
gallery
11 Upvotes

Can't pass up minty freebies. And you never know what else you are going to find during an office blow out. This one is my new index card machine.


r/typewriters • • 17h ago

Inspiration Post I finally tried a Hermes 3000, and I do not get the hype…

Thumbnail
gallery
96 Upvotes

I’m ready to get downvoted into oblivion for this one.

I had the great fortune of getting to try out two different generations of Hermes 3000 at a local thrift store, and I don’t get the hype.

Both were not mint condition by any means, but they were fully functional. Whilst the external bits were a bit rusty on the older one, the internals of both were spotless. No sticky keys or anything.

I did some test typing and they honestly don’t feel all that unique. They’re a little heavy for my liking, and they have that distinct Hermes “mushy” feeling that you get on machines like the Baby. The key travel was also a lot longer than I’d expect.

The “typing on a cloud” description you hear from a lot of people makes a lot of sense in retrospect. It feels like you’re pretend typing on a bed of cotton wool. It’s a very dense feeling even though no effort is required. It reminds a lot of a membrane keyboard.

The build quality of both was also weirdly lacklustre given this is Paillard we’re talking, Bolex and whatnot. I was not expecting for the plastic of both to be as brittle as it was, and for the sheet metal of the older one to be so thin. Neither are terribly built, but for the price these fetch I’d expect something a little more robust.


r/typewriters • • 20h ago Bravo

Inspiration Post my typewriter collection!

Thumbnail
gallery
65 Upvotes
  • Olivetti Lettera 22, green (first series, round keys)

  • Olivetti Lettera 22, light blue (second series, square keys)

  • Olivetti Valentine

  • Olivetti Lettera 32, light blue

  • Olivetti Studio 46, light blue

  • Everest Mod. S

And the rarest one (and also the one I'm most attached to): my glossy black Olivetti MP1 from 1932!

All in working condition!

And right in front of them is Snoopy, guarding and looking after the collection while typing away on his own little typewriter!


r/typewriters • • 1d ago Heartwarming

Inspiration Post Underwood Standard No. 4-J

Thumbnail
gallery
20 Upvotes

Not as common as the no. 1 or 5. Described as a plain straight machine. No backspace key or ribbon color selector. 76 characters


r/typewriters • • 1d ago

General Question Best typewriter to get for a gift

7 Upvotes

My friends birthday is coming up soon and I think a typewriter would be a great gift for her but I want to get something that actually works well and she can use frequently. Any suggestions?