r/tradfri • • Jan 03 '26

DISCUSSION Zigbee was the perfect ecosystem, what happened!?!

25 Upvotes

This is not supposed to be flaming. I really want to know what made IKEA or their hardware supplier turn away from the golden standard of home automation.

ZigBee does support enhanced actions if implemented properly (level, adjust, colour, etc.) It is super energy efficient and if the correct chips are used builds an extended network practically by itself with every new device that is a router ZigBee only needs one coordinator and it can be pretty much any hardware as long as the producers doesn't decide to gatekeep

Did they not have the necessary know-how employed to implement Z? Did they fail in advertising it properly to the customers? Did they choose an incompetent supplier?

I just recently stumbled over tradfri and I was like "fuck yeah finally" just to read a few days later that there decided to exchange the entire line for stuff running on Shitter over Dread. Big oof. Do not understand.

EDIT I: As a comment mentioned fittingly: IKEA is not a tech company. They sit in the CSA with the big tech bros who try to establish an ecosystem that is as much to their own best as possible. If the tech bros say their newest shit is dope, that surely has to be correct, RIGHT?!

EDIT II: Many mention that Matter and Thread will have significant advantages over ZigBee. Thats straight up a lie. Functionality is used as argument against ZigBee that would not exist without Matter and Thread. They cure the illness that wouldn't be there if it wouldn't be for them. The point is to have a standard and a protocol the "owners" of the CSA have full control over. Once the tech is more or less out of baby stage customer exploitation will begin, maybe even earlier.

IKEA you guys could have had the market to yourselves. Big, big L.


r/tradfri • • Oct 05 '26

DISCUSSION I've reset all my Grillplats to ZigBee

Post image
1 Upvotes

After months of very frustrating trial and error with Grillplats plugs going off-line very often. I have finally reset them all and added them to my MQTT network. I have lost energy monitoring functionality and I’ll miss that but I couldn’t be happier now. ZigBee just works.

UPDATE: I’ve added a SMLIGHT SLZB-06MG24U, which is Ethernet connected to my network. My Thread network is solid now. I couldnt rely on Apple TV, HomePod minis and GRILLPLATS to be the backbone of my Thread network. I can highly recommend this dongle/router.


r/tradfri • • Dec 03 '25

DISCUSSION Matter it's not meant to be used by itself

0 Upvotes

Edit:

I give up. The problem i described is absolutely how it works but 90% of the people didn't actually read that i'm referring to the average user pairing this to homekit/google home. They keep reading it like i'm asking a question for myself and replying with "nonsense you can do that with this or that".

People keep reading what they want to read and clearly i didn't explain it how people expect to read it, so i give up. Many people asked this in the last few weeks but i will just reply directly to them.


r/tradfri • • Jan 26 '20

OTHER I am fucking done.

2 Upvotes

I have invested heavily in this eco system. For the first 6 months of the product launch I was laughing at others who invested in other eco systems. Tradfri was smooth responsive and a real game changer.

No the app is buggy as all hell, the bridge drops continually the scenes don’t seem to respond via the app and over all updates are rolled out like a circus.

I’m returning what I can and investing in Hue. I did enjoy being part of this community but Ikea has let me down big time.

Stick to furniture because your software team are dogshit.


r/tradfri • • May 13 '26

DISCUSSION Goodbye Bilresa

1 Upvotes

I tried. I really, really tried.

No network configuration problems. No competing thread networks. Avoided overlapping WiFi channels with the neighbours. 2.4Ghz WiFi is mostly unused in the house. All automations are local - no cloud. All automations on the Aqara M3, no 3rd party eco-systems anywhere in the house. I don't know if ZigBee channel numbers are the same as thread channels, but they are spaced apart. More mains powered thread devices than there are Bilresa switches. Switches have direct line of sight to nearest relay. Kajplats bulbs respond instantly to automations or taps on the phone app. IKEA beta firmware, then latest firmware. Complicated automation to avoid having to even *use* the switches. Tried Home Assistant.

Switches will lag for maybe 10 seconds sometimes. Not *every time*, but often. Several times a day. Maddening.

I have this Aqara M3 (I have their automated roller blinds) so tried an Aqara H1 wireless ZigBee double rocker switch. Even at discount it cost over 5x the price of a single Bilresa - more if you chose the multicolour 3 pack.

Works instantly. Click. Lights on. Click. Lights off. Click. Click. Click. It's pure bliss. Honestly. You can even screw it to the wall and the holes line up with existing UK or type 86 wall boxes.

I gritted my teeth and ordered another 2. I will get more when funds allow.

EDIT: I've replaced the 3 most used Bilresa for now, but I'm still diagnosing this issue as the excellent replies here suggest a deeper problem. I've monitored the Thread network signal strength and there is ONE ceiling bulb that is the wrong side of electrical cabling and copper water pipes under the floorboards - I'll try to patch this weak spot.


r/tradfri • • Oct 27 '24

DISCUSSION Vindstyrka air quality sensor is not really a smart device

0 Upvotes

We bought the Vindstyrka air quality sensor to measure the quality of air at home - it does that but to me it seems like a stretch to call it a smart device without the starkvind air purifier to go with it. For it to be a smart device things it should do:

  • draw graphs of the datapoints across the day so I can see how values change even when I am not actively staring at the device/app stats

  • ability to set scenes based on sensor datapoints (e.g. when pm2.5/humidity/temperature goes above x value turn on smart plug, and send a notification)

I am disappointed in this being called a smart home device, when currently it is just an accesory to the vindstyrka device and not much more. Has anyone figured out ways to make this smarter? And primarily within the dirigera ecosystem?


r/tradfri • • Dec 28 '25

NEW 2026 PRODUCTS IKEA BILRESA remote control integrated into Home Assistant – brief test

Post image
0 Upvotes

r/tradfri • • Mar 16 '24

SUPPORT (ONGOING) Badring not watertight

Thumbnail
gallery
0 Upvotes

I got Badring, and in order to test it, I submerged it in bowl of water, as suggested in the manual.

It was working, and when I checked inside, battery and everything was completely wet and it stopped working.

Also the plastic gray screw in the middle seems to be broken without applying force while closing the lid, and does not hold good, so it is questionable how it would perform.

Design is very cool, must admit, but practicality I do not find the best for me.

Also if it needs to be used for monitoring the water situation remotely via app, one can not turn off the sound, so neighbours can call firefighters thinking that it is the fire alarm actually.

My other brand sensor has actually prongs as screw, so one can put two wires instead for the sensor to be on the place with good wireless conectivity, which with Badring is not the case.


r/tradfri • • Mar 11 '20

OTHER [shameless self promotion - update] Thing • Connect new pricing

0 Upvotes

Hi everyone!

Thanks a lot for all your input and amazing feedback - we've taken it all to heart and have adjusted our offering accordingly. Some users didn't have the use of all the features so we have decided to move them into a premium tier.

As such, we are happy to announce that we're lowering the price to $5.99 per month! And don't forget to take advantage of our 50% discount for 6 months too.

I will reach out to those who are on the old subscription plan and make sure you'll be transferred to the new plan immediately.

For those who are unaware of what I'm talking about, you can take a look here or at https://thing.se. I short, we've launched a privacy first home automation desktop app for Windows and Mac called Thing • Connect that lets you mix and match devices from several manufacturers however you like.

As always please feel free to reach out if you have any questions! Oh and our offer of super free trial accounts - no CC required - is still available. PM for details.

Thanks a lot!


r/tradfri • • Sep 01 '26

OTHER New Home Smart App for iOS

2 Upvotes

IKEA Home Smart app update (1.71.1) has just dropped in to the Apple App Store FYI. Don’t know what it has changed yet although it says you can get temperature and humidity notifications and automate devices based off these.


r/tradfri • • Apr 25 '26

DISCUSSION Gave up on Matter connection

0 Upvotes

I ended up giving up on Matter. It’s just too bad to be used. The Air Purifier problem persist and I think it doesn’t run that smoothly. Had to go back to Apple Home. Hoping that IKEA starts working on real problems that are annoying people instead of releasing software updates that do nothing


r/tradfri • • 6d ago

SUPPORT (2026 PRODUCTS) Alternative Hubs

0 Upvotes

Now that IKEA have discontinued the Dirigera, has anyone successfully used any other matter over thread hubs?

Ive been looking to buy the range of products but it has been hopeless without a hub


r/tradfri • • Nov 14 '25

DISCUSSION How to open STYRBAR

Post image
0 Upvotes

The STYRBAR was hard to open, so I tried with a needle — done!


r/tradfri • • Apr 09 '26

PRODUCT QUERY Kajplat bulbs don’t have thread routing enabled?

0 Upvotes

I found a review on IKEA’s website online. It stated that the Kajplat’s don’t function as routers but rather as endpoints.

My current Nanoleaf do act as routers, so do my Aqara. Is this true that thread routing is disabled in the IKEA bulbs? Which of course means they will not act as mesh extenders?


r/tradfri • • Jun 20 '19

700€ down the drain. Tradfri was my worse mistake.

1 Upvotes

My sole purpose of using smart lights is to use it with Google Home. I've got 4 Google Home in house.

My typical morning? "You've got 46 devices not assigned to rooms".... Or 22, or 37, of 52 - depending on the days. All bloody Tradfri.

  • I've added 2 repeaters hoping it would work. It didn't.

  • I now have a non-ikea smart socket connected to the gateway so I can tell google "Restart Ikea Hub". I wish this was a face I could slap to restart instead.

  • My mouth is getting blister from saying "Hey google, sync all devices".

  • My router is getting grumpy of always re-assigning a fixed IP to the Ikea Hub

So bloody hell (once again, excuse the rage) I can't find anything anywhere to fix the bloody thing. I just want it to work.

Edit:

If you read my post well, I mentioned I already tried the fixed IP method already.

I spoke to a techie at IKEA today and got hope. He had no better answer and was acknowledging there wasn't much to do but: -a new firmware with major overhaul is planned for August -it will include support for many upcoming products (the failed tradfri blinds which are on hold) and someting about a partnership with Sonos


r/tradfri • • Dec 31 '20

OTHER Can I unplug the lan cable after setting up Tradfri ?

0 Upvotes

r/tradfri • • Oct 11 '26

NEW 2026 PRODUCTS LILJEBAGGE send to Germany ?

0 Upvotes

Hello, I’m from Germany. Would someone from Sweden be willing to get a few LILJEBAGGE thermostats for me and send them to Germany?


r/tradfri • • Jan 21 '26

NEW 2026 PRODUCTS Samsung is much worse than apple.

0 Upvotes

This is a rant over Samsung so proceed with caution:

I have a dirigera hub with the new remotes and bulbs (kajplats and bilresa)

And I'm trying to pair everything together for external access.

Outside the dirigera i have no other hubs or radios.

Trying to pair everything in Google home to my 11y old shield tv, outside my tuya cam that is not detected and everything works, some small disconnections sometimes. So yep no issues.

Trying to pair to my cheap 8th gen ipad from 2020 in home kit... Yep no issues, all lights, my security camera, my Samsung tv, everything is detected and work.

Using the Ikea app, yep all light and remotes are here, home assistant? Detecting everything and bridging everything with the pie....

Samsung smart things and pairing to my Samsung 2021 4k hdr smart tv.... NOPE. the tv is alone and refuse to see anything and tell me i need a SAMSUNG HUB! Or a tv from 2022... Even if it is controlled by all other apps . It just stay alone in the app saying i don't have compatible matter hubs.... What a world.

Sorry it was just a rant, nothing against Ikea.


r/tradfri • • May 31 '25

DISCUSSION Tradfri/Philips Hue hardware incompatibility purposefully introduced in newer lights?

0 Upvotes

Hi all, I would like to share the disturbing discovery I made about Tradfri lights recently. I also would like to get as much feedback from people that share or shared the same experience.

Here is my uninteresting story:

A couple of years ago I switched my old Tradfri setup to a Philips Hue bridge with Philips Hue lights, working flawlessly since, as expected. I kept my Ikea lights in a box. I bought those lights in 2020 if I remember correctly.

A few months ago I wanted to add more lights to my setup. Since Philips Hue lights are quite expensive, I checked more affordable options: I found out that Tradfri lights are compatible with Philips Hue bridge, official Ikea website also provides a tutorial. That is cool! For two reasons:

— I already have a couple of old Tradfri lights, so two more free lights

— I could buy more brand new Tradfri lights from Ikea at 10€ per light, instead of at least 30€ per light with Philips Hue lights.

So that is what I did: bought 3 brand new Tradfri lights for 30€, and gathered the 2 old Tradfri lights from my old setup. I quickly noticed something: the brand new are physically differently, and weigh significantly less than the old ones that I bought 5 years ago. I did not thought of it that much since manufacturing evolve, nothing worrying about that at all. They are just not the same model.

Anyway, I updated all of them using my old Tradfri bridge, reseted them, and connected them to my Philips Hue bridge. So far so good.

… And you know what follows: just the day after, the I found out 3 of my 5 Tradfri lights are just unresponsive. The Hue app tells me all the lights are ok and controllable, but nothing I do on the app changes whatsoever the state of those lights. They either remain off or on, without the possibility to change their state.

I googled this issue and found out many people had the same problem :

https://www.reddit.com/r/Hue/comments/1g8yi6h/ikea_tradfri_not_working_corrctly_with_philips/?tl=fr

https://www.reddit.com/r/tradfri/comments/18j6iiq/tradfri_not_working_properly_with_hue_bridge/?tl=fr

It has been a few months and since this problem occurred at least 50 times, had to manually turn off/on the problematic Ikea lights to reset and be able to control them again… For 1 or 2 days maximum.

Then, something just struck me: 3 of the lights were constantly go unresponsive, and the other 2 literally had no issue during the 6 months I set up the Ikea lights. And, yes, these 2 are the old ones I bought 5 years ago.

It seemed bonkers to me so I made sure to properly check and a few weeks after, I can guarantee you that the ones I bought in 2020 are fully compatible with Philips Hue and work flawlessly. The ones I bought in 2025 will go unresponsive within a few hours. And yes, all the lights have the same software version.

Fun fact: you can trigger the unresponsive state of those lights by quickly turning off/on the lights in the Hue app. And I checked all of them: the new ones will go unresponsive within 5 seconds. The old ones, despite spamming the power button on the app, will always remain responsive.

Conclusion :

Fact : since the problem does not come from software, the hardware of the new lights is somewhat not fully compatible with Philips Hue.

Personal take : this hardware “incompatibility” has been introduced on purpose by Ikea to make you switch back to Tradfri setup.

Please share your experience if you have one. This is a serious issue and would like to know if this happened to other users.


r/tradfri • • Jul 20 '19

HELP IKEA discontinuing smart bulbs?

0 Upvotes

Edit: check comments, they are just updating the line of bulbs, I assume to add three colour modes and possibly upgrade the LEDs?

Hello,

I have a few IKEA Tradfri bulbs, a controller and the gateway and upon looking to get more bulbs today, the 1000 Lumen E27 and 400 Lumen GU10 are both tagged with “Last chance”.

Does anyone have any info what is happening with this range of bulbs? Are they bringing out replacements or are they going to stop selling white bulbs?

Link for where I am seeing this tag on the products: https://www.ikea.com/gb/en/cat/wireless-led-bulbs-36813/

I have had a brief scan through the recent history of this sub, however I could not find any info relevant to this.

I’d really like to know what is going on with this range of products before expanding their usage throughout my home rather than just in one room :/


r/tradfri • • Oct 26 '18

TRÅDFRI plugs found in IKEA Taastrup (DK)

Post image
2 Upvotes

r/tradfri • • Dec 25 '24

SUPPORT (ONGOING) Best rechargeable battery for Rodret

Post image
0 Upvotes

Good day;

I have decided to change my smart home system to IKEA, so I will be ordering

10 Rodret along with some bulbs and I want to use rechargeable batteries, at home for other electronic devices I am using "Energizer 700 mAh NiMH AAA Batteries" is it ok to use those batteries for the remotes or do you recommend some other battery with different voltage etc?

My hesitation is; batteries that I have got the correct voltage or they may be to high?

Thank you in advance.


r/tradfri • • Sep 12 '26

PRODUCT QUERY GRILLPLATS for electric fireplace

0 Upvotes

According to the manual, GRILLPLATS are rated for "1800 W / 15 A Resistive load, Max 300W motor load". I have an electric fireplace which pulls 1500W / 15 A. The fireplace would be set to "ON" physically but the GRILLPLATS would only supply power for an hour at time max.

It's at/below the max rating but not sure if this is a bad idea for other reasons. I am in North America (Canada) if that matters. Am I crazy to use a GRILLPLATS for this purpose? Does anyone use a smart plug for this purpose/something similar?


r/tradfri • • Oct 03 '26

SUPPORT (ONGOING) Do newer Ikea smart devices work. Bad experience with bilresa

0 Upvotes

I got excited when the new matter with thread range started coming out a purchased a few bits.

I got 4 Bilresa two button switches and two of the disk switches. I got an air quskirt sensor, a motion detector and window/door sensors.

I have only taken the bilresas out of the box and haven’t bothered with the others as it’s been bad.

I have an Apple TV 4K Ethernet and a number of other brand matter with thread and matter with WiFi devices that work perfectly and easily setup to Apple home on my iPhone 16 pro.

None of the Ikea switches will pair. I’ve tried all sorts since I got these when they first came out. I do not own an Ikea hub or want to introduce a second thread network.

Was there an issue when they came out that’s now fixed? Do I just buy new ones?
I want some smart plugs too. Does the grillplats actually pair?