r/technicaldrg • • Jan 05 '23

guide A Guide to Avoiding Fall Damage

217 Upvotes

Gravity is the single deadliest enemy on Hoxxes, having claimed the legs and lives of over 50 million dwarves in 2022 alone. In this guide I will explore the many ways in which you can mitigate or altogether avoid taking fall damage. Throughout the guide I include clips/videos to demonstrate various methods.

General methods

These are general methods that apply to any class.

  • Grabbing a ledge cancels any fall. To do this, simply move forward and face the ledge while falling - you do not need to jump to do a ledge grab. The most obvious source of ledges is terrain, as seen here and here. This video shows a great clutch ledge grab pulled off in an actual mission by u/Shotgun-Crocodile. Aside from terrain, you can ledge grab virtually any object, such as the minehead, as long as it can trigger the ledge grab animation. Although going for ledge grabs is risky, with some practice you can get them fairly consistently.

  • Power-attacking the ground while falling can make a ledge for you to grab, as shown here and here. This is very inconsistent and should only be used as a last resort. Using drills is much more consistent; the method for doing so is covered in detail later in this guide.

  • Grinding on a pipeline by holding E/interact while falling on it will cancel your fall. Similarly, holding E while falling onto a zipline lets you grab it and cancel your fall.

  • Holding E while falling on a downed teammate to revive them will cancel your fall. (Discovered by AssemblyStorm)

  • Falling on top of a teammate's head will cancel your fall and bounce you up, meaning you can coordinate with teammates to safely take long falls. You can also bounce on top of praetorians (and all praetorian variants, including ebonite), oppressors, every dreadnought type, bulk detonators, wardens, menaces, and prospectors.

    • While on the topic of using enemies, you can stand on top of brood nexuses and spitball infectors. They will not mitigate fall damage, but they can provide some height in case you need to break a fall early.

    • Holding E while falling onto a cave angel lets you grab it.

  • Falling on patches of snow in the glacial strata or on green goo in the fungus bogs gives the same fall damage reduction as falling on an engineer's platform. Goo from goo bombers does not have the same effect.

  • Being frozen prevents you from taking any fall damage - demonstrated here.

  • While standing on a resupply pod or similar moving object that you can stand on such as cargo crates or the uplink, you are not treated as falling, even if the pod itself is falling - demonstrated here.

  • Tunnel Rats give 60% fall damage resistance (buff beers have been bugged for years to apply twice, so tunnel rats gives 60% rather than 30%). This stacks additively with other sources of fall damage, which will become important later in this guide.

  • Damage resistance via veteran depositor, shield generators, azure weald pillars, or other sources will reduce fall damage.

  • Hover Boots stops your fall when activated. Whether you should actually take HB over another active perk is debatable, and hopefully this guide gives you enough tools such that you no longer need HB.

Driller

Drilling down

This section is the real meat of this guide. As driller, you can drill down into the ground while you're falling, which will make a ledge that you can then grab to cancel the fall. The timing for this trick is fairly tight, but with practice, it's quite consistent. There are many moving parts and nuances which are explained below.

Part 1: Timing

Correctly pulling off this trick requires starting your drilling at the right time while you're in the air, since there is a delay between when you start drilling and when the drills destroy terrain. The timing is more lenient than you may think and it shouldn't take too much practice to get used to.

While testing, I found that I personally had a problem with drilling too early. This may not apply to everyone, but you get a lot more leeway than you might think in terms of drilling late, so don't be afraid of waiting longer before starting to drill.

The drill speed upgrades affect the timing, and I personally found that having both drill speed upgrades on the drills makes the timing much easier, even though I've spent 99% of driller time using only one drill speed upgrade. For reference, this video demonstrates the timing for when you have one drill speed upgrade. In the rest of the videos, I am using both drill speed upgrades.

Part 2: Speed

Moving at a good horizontal speed is imperative. Assuming your fall is planned, i.e. you're walking off a ledge in a controlled manner like in the above video, then (a) if you're falling from a short-medium height, you should walk off the ledge and (b) if you fall from a long height, it's better to sprint. While you could probably get this trick to work while moving at any speed if you have perfect timing, moving at the right speed gives you more lenience with the timing.

This video demonstrates how sprinting can mess up medium falls (in this example, the fall deals ~109 damage). For the first three attempts, I simply walk off the edge, and the ledges I drill end up in good spots with plenty of lenience for timing. But for the next three attempts, I sprint off the edge, which makes me overshoot the ledge by the time I reach the ground, making me miss the ledge grab. My timing is virtually identical across all attempts. Youtube allows you to go frame-by-frame through any video, so you can inspect the timing and the overshooting for yourself.

There are additional steps you can take to mitigate this problem of moving too fast horizontally, such as decelerating and angling forward, but if you can avoid moving too fast in the first place, then it's best if you focus solely on your horizontal speed and drill timing, rather than introducing additional variables.

As an aside, here are some basic facts on horizontal speed that may come in handy:

  • Your walking speed is 3 m/s and your sprinting speed is 4.35 m/s.

  • While airborne, if you are not holding down any button, you will not accelerate or decelerate horizontally.

  • While airborne, if you are not moving forward, you will decelerate by moving backward.

  • While airborne, if you are moving slower than 3 m/s, moving forward will accelerate you to 3 m/s. However, you will not accelerate past that.

  • While airborne, if you are moving faster than 3 m/s, moving forward does not accelerate you.

Applying one of the above facts: If you're moving too quickly, moving backwards to slow your horizontal speed may help. I found that decelerating in the air after sprinting off the ledge made the trick easier to perform than if I were just sprinting - demonstrated here [medium fall].

For long falls, I've found that simply walking off becomes less consistent than sprinting off. In this video [long fall] I walk off twice and sprint off twice; when walking, I end up undershooting the ledge since I'm moving too fast downwards, while sprinting works fine. It's possible to succeed when walking off, but it's more difficult than with sprinting.

One more thing to note: You generally do not need to jump when walking/sprinting off a cliff. It doesn't really help, and if the terrain is angled wrong, you may brush against it when jumping, which will mess with your movement. I suggest not jumping if it's not necessary in order to not introduce an external factor.

Part 3: Angles

If you're moving too fast horizontally, you can angle your drills forward a little rather than looking straight down. This will make the drill timing much easier - as shown earlier, if you're moving very quickly horizontally, you can easily overshoot the ledge you make. It's also easier to manage the angle compared to trying to decelerate yourself to the right speed. This is demonstrated here [medium fall].

Angling your drills forward is especially useful for when you're dashing. Of all the times I tried dashing off a cliff, I could only successfully ledge grab when angling my drills forward, as shown here [long fall]. When aiming straight down I would constantly massively overshoot the ledge made. If you accidentally dash off a cliff, angling forward is probably your best option.

Wrapping up: Practice and luck

In order to make this trick work consistently, the most important thing to do is practice. You need to practice, gain experience, and get a good feel for the trick to work well, particularly if your fall isn't planned.

Unfortunately, luck will occasionally screw you over. Sometimes the chunk you drill just isn't shaped right and you will splatter on the ground. For instance, compare this screenshot in which I failed the grab with this screenshot where I succeeded - the ledge formed in the first image is malformed and causes me to hit the ground, even though for that attempt, I actually began drilling later into the jump than for the attempt from the second image. But in any case, this trick is still fairly consistent with good timing, so don't get discouraged.

Driller's other trick

As of Feb 23 2023, you can no longer use C4 to avoid fall damage. R.I.P. C4 trick.

Holding E/interact on C4 while falling will start the channel for picking up the C4 and completely cancel your fall. You can either drop C4 pre-emptively and try to jump down on it, or if you're already falling, you can drop a C4 midair and quickly attempt to grab it to remove your momentum. Also, spamming interact quickly enough on a C4 that is midair, e.g. by binding scroll wheel to interact, will allow you to hover midair. (Discovered by u/SplitSentro~~)~~

This trick is much more simple and more practical to pull off than the one above. Frankly the only reason to use the ground drilling trick over this one is for style points. Or for the adrenaline if you're getting bored.

Engineer

The Plastcrete MKII upgrade for engineer's platforms is the obvious thing to use for engi. The details on fall damage and on this upgrade are explained on the wiki page for fall damage, but this upgrade essentially removes up to 87.5 damage from your fall if you land on the platform. This is perfect for short to medium falls, but you will still take significant damage from extra long falls. For long falls you can also shoot the plat slightly farther than normal and try to ledge grab on it to completely avoid fall damage rather than taking some (thanks u/Virryn__). Note that some engis may not be using Plastcrete MKII, either because they don't have it or they want to troll. I had this happen once in one of my public haz 5 lobbies, although I instantly noticed it, because platforms without the upgrade look greyer compared to platforms with it.

Firing an RJ250 shot at the ground while falling will offset the speed at which you're falling. This video is a good example. For long falls you may need to take Disabled Inertia Interior so the PGL projectile can hit the ground before you do.

You can no longer use proximity mines to avoid fall damage.

Similar to C4, holding E/interact while falling onto a proximity mine that has not exploded yet will start the channel for defusing the mine and completely cancel your fall. And spamming interact quickly enough on a mine can let you hover midair. (Also SplitSentro)

Scout

The obvious methods for stopping falls as scout are to grapple away, and to use hoverclock or special powder. Notably, hoverclock's hover mechanic resets every time you kill an enemy with the M1000, allowing you to hover multiple times in succession. Also, if you special powder upwards, you should always have enough time to reload the boomstick before reaching the peak of your jump, so you can be ready to use it again later if needed.

Scout's armor has an upgrade that gives 33% fall damage resistance upgrade, and the grappling hook has an upgrade that gives 25% fall damage resistance after grappling. Both of these upgrades are additive with each other, as well as with tunnel rats. This means if you take both of these upgrades and drink tunnel rats, you can achieve 100% fall damage resistance. Technically, 33+25+60=118 is greater than 100, but this doesn't mean you will heal from falls - it just means you take zero fall damage. Additionally, the grapple upgrade is bugged such that after you grapple once, it lasts permanently until you are downed, after which you simply need to grapple again to get the buff again. All of this is demonstrated here.

Note that the fall damage resistance from scout's grappling hook does not stack with the fall damage resistance from gunner's zipline. Since these use the same status effect, they don't stack to give 50% - only one of these can be active at any time (source). Aside from this exception, all sources of fall damage resistance stack additively with each other.

Gunner

The fall damage upgrade for gunner's zipline gives 25% fall damage resistance. Like scout's grappling hook, this upgrade is bugged - after grabbing a zipline that has this upgrade, you get the fall damage resistance permanently until you are downed, after which you need only grab an upgraded zipline again to get the buff again.

Gunner is the class most capable of using damage resistance (DR) to mitigate fall damage, although DR stacks multiplicatively, not additively, so you can't reach 100% DR. Gunner can get DR and fall damage resistance from:

  • Autocannon's T5 upgrade (50% DR at max RoF)

  • Coilgun's T4 upgrade (50% DR while holding the trigger, even while reloading)

  • Zipline T3 upgrade (25% fall damage resistance after grabbing a zipline)

  • Shield generator (50% DR when inside)

  • Veteran depositor (30% DR)

  • Azure Weald pillars (50% DR)

This DR stacking is demonstrated here, although bear in mind that this video used a now-fixed bug that allowed the DR from the coilgun to persist indefinitely, even while not using it.

Of course, it isn't strictly necessary to do all this stacking; if you need to take a short fall, quickly pulling out your coilgun and holding the trigger for 50% DR can be enough. You can also pre-emptively drop a shield on the ground for another 50% DR.

This was mentioned earlier, but it bears repeating: Setting up ziplines in strategic locations for you and your allies to grab will help prevent many nasty falls.


r/technicaldrg • • Feb 17 '24

build Haz5 Generalist Builds

206 Upvotes

Preface

Builds made to handle extreme difficulties above what is seen in the vanilla game, such as builds in the Modded DRG Buildonomicon made by Vonacht in the Practical DRG discord, are successful because they are specialized to handle a specific combat role. The builds focus on the inherent strength of each weapon/class but lose their ability to effectively handle threats outside of the specialized role they are built for. This works in a coordinated group because specific combat roles can be assigned to the teammate who is best at handling that role (ex. Driller handles Grunt clear, Scout handles high value target sniping). The builds can excel within a specific 4-person synergistic team, but will struggle to handle their weaknesses when used without teammate support. When joining or hosting a random Haz5 lobby there is rarely build coordination across the team and the contribution of your teammates can vary greatly. Therefore, generalist builds are a more reliable way to have successful missions when playing in public games. The goal of this post is to highlight a single optimized generalist build for each class that is consistently effective in any Haz5 game regardless of team composition.

Build Considerations

A primary consideration for these builds are their flexibility to efficiently handle all types of combat threats and mission types in Haz5 difficulty within a 4-person lobby. The builds need enough single-target damage to solo carry an Elimination mission but also enough ammo efficiency to fully clear a tough swarm after pulling a few eggs at once in an Egg Hunt mission without stealing resupplies from the team. The generalist nature of each of these builds also make them great for solo missions. However, solo builds can afford to be less ammo efficient than these builds with the additional resupplies that can be taken without teammates.

Additionally, the builds have to assume worst case teammate scenarios so they can remain effective in all team compositions. One result of that consideration is the builds cannot rely on elemental synergies such as Fire with Bulldog [Volatile Bullets]. If teammates bring ways to cancel an element being built around, such as a Driller using the Cryo Cannon, then the build would not function properly. This is not as important for horde clear components of builds since temperature shock is enough damage to outright kill low health targets. However, elements are still avoided where possible in the listed builds to prevent any potential elemental anti-synergy with other teammates. The assumption of minimal or counterproductive teammate contribution also means that team-oriented perks, such as Friendly or Field Medic, are not considered. Perks used to help a teammate who frequently goes down or is actively griefing by attacking the team become less valuable than perks that would help stabilize a situation without teammate contribution.

The class name of each build below links to its own karl.gg post that includes a significantly more in-depth breakdown of each build decision, provides gameplay tips, and suggests alternative build choices. The intent was for this post to remain relatively concise for those just looking for a build, with additional information available for those who want to learn more.

Final Note

When used by a skilled player there are many builds capable of succeeding in public Haz5 lobbies, not just the ones highlighted in this post. The alternative recommendations included in the karl.gg breakdown for each class provide additional build variety while retaining a high level of effectiveness. If using these optimized builds eventually makes Haz5 too easy there are two primary options for increasing difficulty, further increasing enemy difficulty or reducing player strength. Modded difficulties such as Hazard 6, 7, 8, and Lunatic (L) will increase enemy base stats and alter enemy composition (ex. fewer base Grunts, more Slashers and Guards). Those difficulties can also be combined with enemy spawn modifiers to increase the number of incoming enemies in addition to individual enemies being stronger (ex. Hazard 6x2 or Lx1.5). Otherwise, combat difficulty in Haz5 can be indirectly increased by purposely using less optimized loadouts. That will challenge player gameplay fundamentals to compensate for the lack of raw strength from build mechanics.

Active Perks

  • Dash (can use Heightened Senses if Scout)

  • Iron Will

Passive Perks

  • Resupplier

  • Vampire

  • Born Ready

General Equipment

  • Pickaxe: 11

  • Armor: 1213

Driller

  • Primary: Corrosive Sludge Pump [Volatile Impact Mixture]: 23222

  • Secondary: Experimental Plasma Charger [Persistent Plasma]: 21222

  • Satchel Charge: 3112

  • Reinforced Power Drills: 2111

  • Throwable: Impact Axe

Engineer

  • Primary: "Stubby" Voltaic SMG [EM Refire Booster]: 11123

  • Secondary: Breach Cutter [Roll Control]: 23122

  • LMG Gun Platform: 1221

  • Platform Gun: 212

  • Throwable: S.S.G

Gunner

  • Primary: "Hurricane" Guided Rocket System [Plasma Burster Missiles]: 11212

  • Secondary: Armskore Coil Gun [Ultra-Magnetic Coils]: 32213

  • Shield Generator: 223

  • Zipline Launcher: 212

  • Throwable: Tactical Leadburster

Scout

  • Primary: Deepcore GK2 [Electrifying Reload]: 12123

  • Secondary: Zhukov NUK17 [Embedded Detonators]: 13231

  • Flare Gun: 222

  • Grappling Hook: 2113

  • Throwable: Cryo Grenade


r/technicaldrg • • Jul 26 '22

build BUILD BREAKDOWN: Bullet Hell (Gunner's Lead Storm) [MODDED: Haz6x2]

164 Upvotes

Bullet hell is probably one of the most widely disparaged overclocks in the game. It's often compared unfavorably to the base auto cannon, and simply dismissed as useless. In this build breakdown I will be showing why this is an unfair comparison, and why for me bullet hell ranks as in the top 5 overclocks for gunner primaries.

Why Bullet Hell

Bullet hell on the surface looks like an absolutely terrible overclock. It removes a TON of base damage from your bullets, and adds a probability based ricochet for one additional target to your bullet. It also comes with the largest accuracy penalty of any overclock. Base bullet hell with no other mods selected is basically unusable. Bullet hell trades direct single target damage for utility. It is up to the player to make the most of that utility to outweigh the downsides of the OC. This is why I personally find bullet hell the most fun OC to play, it gives a lot of outlets for creative play, and rewards you for coming up with interesting ways to use it.

Tier 1

This first option is an extreme no brainer. Bullet hell has such an absurd accuracy penalty that you need to pick option 3 Improved Platform Stability in order to get back to a weapon that somewhat feels like a minigun and not the end of a sparkler. The other options are not even worth discussing.

Tier 2

Normally a personal choice tier. I would argue that on Bullet Hell you lose that choice and you have to take High Velocity Rounds +2 damage to help offset the massive -3 damage from bullet hell. Looking this mod as a percentage. Taking bullet hell lowers your damage by -3, which brings the base gun down from 10 to 7. You can now either take 600 ammo bumping your total ammo pool from 2400 to 3000 (25%). Or you can take +2 damage and bring your damage from 7 to 9 (~29%). More importantly is breakpoints. With the ammo mod your breakpoints are going to suffer immensely. You are going to hit more armor since you are breaking it less often, and get more reduced damage shots on your already lower damage bullets. I did some tests on common ricochet targets below to show the breakpoints (median of three tests)

How many hits to kill common enemies with ammo mod vs damage mod.

EnemyAmmo modDamage mod% ammo saved by damage mod% ammo saved by damage mod over ammo mod
Swarmer3233.338.33
Grunt17-2013-1526.321.32
Slasher302226.671.67
Guard544124.07-0.93
Acid Spitter221818.18-6.82
Web Spitter86250.00

As you should be able to see, by taking damage you are saving roughly 20%-33% ammo, which means by taking the damage mod not only can you kill things much faster, spending less time on each enemy, but you save more ammo too. There is 0 reason to take the ammo mod with bullet hell.

Tier 3

This is where most people make their first huge mistake and go for Blowthrough Rounds. Usually this is a good choice on almost any build. However damage per bullet is not the draw of Bullet Hell, so making your bullets potentially hit one more target in a straight line is a very meager benefit.

The strength of bullet hell is that you have more bullets per bullet... so this means you get extra proc chances and status effect spread (stun, armor break, hot bullets) on each shot.

Improved Stun is the pick on this tier, that basically makes the entire overclock worthwhile. The stun duration triples, and you will be dishing out enough stuns to stunlock about 20 enemies at the same time. Another hidden benefit of this mod is that it keeps enemies off your back just enough that you have more time than usual to let the gun cool while kiting. Since you do not have the luxury of cooling on tier 1, stun helps you manage your heat level much more effectively.

Hardened Rounds is an OK choice for non-modded game play if you want to play with bullet hell on hazard 5. If you find yourself not being overwhelmed by enemies too often, you can swap from stun to armor break to increase your damage. Since you cannot control where the bullets hit enemies, ensuring that they can reliably break armor increases your overall damage significantly.

Tier 4

This tier offers the first real choice, which depends on your personal preference.

  • Variable Chamber Pressure is a good option to help bring your damage up. With this and damage on t2, you actually dish out quite a bit of total DPS counting both the main bullet and the bounced bullet. Assuming 90% player accuracy, and ignoring the tier 1 rate of fire mod it's the build with the 5th most DPS you can get on the minigun.

  • Lighter Barrel Assembly is another great option. This lowers your reaction time required to start stunning things which makes it better at dealing with getting overrun. Another good reason to run this mod is if you frequently find yourself needing to cool enough that the gun starts spinning down. Since the gun cools slower the hotter it is, if you get to the very top of the heat meter before letting it cool, the gun will spin down before you should start firing again.

  • Magnetic Bearings is entirely useless. There is 0 reason to ever pick it.

Personally I take Variable Chamber Pressure. All of the issues that Lighter Barrel Assembly fix can also be fixed by improving your skills. Don't heat your gun past 85%, if it does you need to work on your kiting and situational awareness. Prespinning your gun when you expect to get into a fight is sufficient 99% of the time.

Tier 5

This is where the choice in playstyle comes in. You can opt to play defensive, brawling, closer range with aggressive venting. Or a more long range, offensive style with hot bullets.

  • Aggressive Venting is extremely powerful with bullet hell. Bullet hell and stun keep enemies piling up near you as they swarm in without quite killing them. You often need to flick around to hit things directly that are not getting stunned, making it difficult to finish off targets. This pairs perfectly with aggressive venting, making a dense pile of damaged enemies nearby to hit with the vent. The vent will wipe out everything smaller than a guard and clear out a ton of space for you to reposition. Aggressive venting also helps mitigate another of bullet hell's weaknesses: being ammo starved. If vent connects with a big swarm it can do massive damage, if the fleeing / burning bugs retreat into a choke point, fire can spread to additional bugs doing a ton of extra damage and outright killing all swarmers trying to come through that chokepoint.

  • Hot Bullets is probably the meta pick for 6x2 on almost any minigun build, and unsurprisingly it goes great with bullet hell as well. You lose out on the personal safety of aggressive venting, and gain huge offensive power. Stunning a wall of grunts and igniting all of the guards and slashers can do a lot of damage. Stun and hot bullets work in tandem to ignite a target and stun other nearby targets. This results in very effective fire spread. The lower damage of bullet hell here actually helps in a way, preventing ignited targets from dying too quickly to spread heat to their neighbors. In sandbox (terrible terrain to fight with bullet hell) with hot bullets, stun, and bullet hell I can beat 100 hazard 6 slashers at once (https://youtu.be/K7RDSojfxKM) so it's not terrible at defense, just not as good as aggressive venting. The combination of fire spread, stun, and kiting is enough to keep them just in the sweet spot where they can't quite get you before burning to death. The other huge benefit of hot bullets is the ability to ignite distant targets to then use volatile bullets bulldog on. The margin for error is much thinner than aggressive venting, if you accidentally overheat you are in big trouble.

  • Cold as the grave is a trap option. The other two options on t5 are significantly better for any build, and this is compounded by bullet hell doing very little damage outside of hot bullets or aggressive venting. Typically on reviews for bullet hell where the conclusion is that it is bad, they pick cold as the grave.

Summary of the two options

With all of this said we can divide the good bullet hell builds into 2:

  1. Offense Hot bullets build: 322X3

  2. Defensive Aggressive Venting build: 322X1

Secondary and grenades

The strongest secondaries are ones that will round out your build with high direct single target damage. It's also important to note that you do NOT want a secondary that will be used for a long period of time. You don't want the gun cooling too much with hot bullets, typically you will ignite a target and swap to bulldog, take a few shots and swap back to keep your heat in the red. With aggressive venting, you only have 5 seconds of downtime after a vent, you want to be back on minigun firing as soon as you can to begin building up the heat meter again. This means BRT in general is a bad choice since it typically requires a lot of time to have any impact. The coilgun is in the same boat since it requires charging before firing. Coilgun is in a weird place balance wise though, its hard not to recommend 222x3 hellfire with any primary since its so powerful, but it doesn't really compliment bullet hell very well so I will ignore it.

For the hot bullets build I use 2332X volatile bullets bulldog. This lets you ignite and snipe things from across the map, combined with bullet hell's ability to quickly find and kill leeches in the dark this build is extremely efficient at clearing out a new cave solo.

For the aggressive venting build solo I will usually take 2332X elephant rounds. Aggressive venting usually won't ignite most targets you would want to hit with volatile bullets like praetorians, or oppressors. Instead you can just rely on the fear and good old elephant rounds to deal with big targets.

For grenades if I am taking volatile bullets I will take incendiary grenades for the extra ignition source. Sometimes you just don't have the time to wait for your gun to heat up enough to ignite something, or you have a lot of small targets around a big one you want to hit with volatile bullets. The incendiary grenade can also be taken with volatile bullets and aggressive venting if you use it primarily as a source of ignition for large targets such as praetorians and oppressors. Though this still won't help you with longer range targets.

As always, you can take cluster grenades if you are good with them, they are much higher immediate impact grenades than incendiary. You can even take them with hot bullets and volatile bullets if you want an additional source of stun instead of an extra ignition source. It's hard to go wrong with incendiary or cluster grenades both are extremely powerful.

Playstyle and tips

Bullet hell is a very aggressive playstyle, with either hot bullets or aggressive venting. Most of your damage is coming from fire in one form or another, so positioning and heat management is even more important than it is for other minigun builds. In addition bullet hell adds a lot of utility to your kit which should not be ignored.

  • You almost exclusively want to fight in small corridors and hallways. Fighting out in the open is death. You lose all the benefit of heat and fire spread if the bugs can separate out and stay far away from one another.

  • The minigun cools slower the hotter it is. In order to stay in the red and keep hot bullets online you should aim to keep your heat hovering around 75%-85%. This keeps it at the perfect cooling speed to kite. Keep firing up to 85% heat, stop firing, turn toward the direction oyou want to go, jump and flick your aim back toward the enemies, start firing and the gun should roughly be at 75% heat again. This rhythm will also keep your gun full spun up most of the time for the 15% damage bonus.https://youtu.be/K7RDSojfxKM

  • With aggressive venting, stun enemies in such a way that they make an arc you can move into, you want the bugs to surround you right as you vent.

  • The playstyle with aggressive venting is very aggressive. Learn how much time it takes to vent from anywhere on the heat meter so you know when to start wading into the bugs to get the optimal vent off.

  • Venting causes massive fear which is not only great for personal safety, but if you can force bugs to retreat through a small chokepoint they will do massive damage with heat spread to other bugs, and also you can now hold the chokepoint again.

  • Bullet hell is the ultimate leech killer. Even from outside a cave entrance you can often times accidentally find and kill leeches. Flick bullets over the ceiling randomly to find leeches quickly. https://youtu.be/cvR5boLShtU?t=1012

  • Bullet hell an be used to find enemies around a corner that do not have line of sight on you. This can often be useful for sniping an acid spitter before it even sees you. It is often worth it to shoot a few bullets at a dark corner or unknown area to find threats. If no health bars pop up that area is empty.

  • With hot bullets your target priority is a little different than normal minigun. Deal with high threat low HP targets as normal, such as web and acid spitters. Most other threats however can be stunned and left alone such as slashers and trijaws. Instead you want to stun and ignite them and then move on to another target. Your goal isn't to kill bugs with bullets, it's to set as many bugs on fire as possible. This also means tanky bugs are a great target such as guards, since they will ignite and burn for a long time while presenting a very low threat.

  • Aggressive venting will often times knock down stalactites from the ceiling seemingly way too far away. When clearing out a PE or Refinery mission cave initially, bullet hell can be used to gather up bugs like normal all around you. If you stand under some stalactites the vent will cause fire fear and a rain of death from above. https://youtu.be/orNf1w1P4kM

  • Bullet hell can stun things behind you. Depending on your situation you can often rely on bullet hell to stun enemies behind you without looking. This is a huge boon on your attention economy letting you focus on the enemies that matter more. https://youtu.be/FIAoP9OWSbU?t=991 this clip shows one case where I identified the number of enemies coming in from behind me was low, so I let bullet hell bounces deal with it while I built up heat for an aggressive vent on the oppressor.

VoDs

Assorted videos using bullet hell on 6x2

Isn't it just the base auto cannon but worse? (rant incoming)

No. Not even remotely.

This is a common opinion of spreadsheet jockeys that look at the damage numbers and conclude that it just "turns the minigun into a weak autocannon" since it can only hit 2-3 targets per bullet. They then take it into missions using blowthrough and cold as the grave, and play it exactly like the autocannon, as uncreativly as possible and conclude that its a bad autocannon.

Thinking about bullet hell for even a few seconds should be enough to realize this isn't true. Autocannon can't hit enemies behind you. Autocannon, can't shoot around corners. Autocannon can't seek out and kill all leeches in a massive cave in seconds. Autocannon doesn't stun. Autocannon has horrific accuracy and anything farther away than 20m is might as well be out of range. Splash from autocannon doesn't do weakpoint damage. The autocannon can't apply heat, the most overpowered status effect in the game. At this point I'm tired of coming up with things and listing them, I'm sure I could keep going for a lot longer.

In general the autocannon is not a flexible weapon. And lacks a coherent, smooth combat loop. The minigun by comparison is fantastically flexible and has a well designed (probably on accident) combat loop. The main reason the the autocannon performs well in the vanilla game, and to some extent starship troopers one of the more popular "difficulty" mods, is low enemy variety. The AC excels at killing non-vetran grunts. And haz <=5 provides basic grunts coming at you slowly from one direction in spades. This weak enemy composition does not force you to split your attention and will not punish mistakes.

Once you get to hazard 6+ levels of enemy variety the autocannon falls off a massive cliff. The bugs are faster, and the quantities mean they spread out and flank you much more often. The autocannon struggles to even deal with grunts in modded difficulty because of the increased speed and variety. Guards will regularly make it through to you, blocking tons of shots that would normally be hitting slashers and grunts. They can force you back much more effectively, and split your attention dealing with flanking grunts, costing you a lot of time retreating and then taking back space after the wave is over. On haz 6+ this is pretty much a death sentence. Simply by taking the minigun over the autocannon you can mitigate almost all of these problems. The ability to stun enemies is huge. For example, if a menace spawns 20m away autocannon needs to seek cover, or blow a shield. Minigun will flick to it until the stun icon pops up (usually a fraction of a second) and then go back to ignoring it. This can usually be done in your normal kiting cycle while in the air from a bunny hop and costs almost nothing. The larger the enemy variety the worse the disparity between economy of attention gets. The autocannon just can't deal with anything that isn't grunts in an time efficient way. Whereas the minigun with stun can easily shift focus to deal with something in a fraction of a second, and shift back. Now when you take bullet hell on the stun minigun, you don't even need to aim at the threats you want to stun. You just need to aim near them. Over the course of a swarm this results in a huge savings of attention that normally you would need to spend on special threats. One of the biggest advantages of bullet hell is having all of this free attention to reinvest during a swarm. In that regard I would actually argue that autocannon and bullet hell are polar opposites.

Now lets consider another issue with hazard 6x2. Increased stationary enemies. Autocannon SUCKS at breaking into a fresh cave. Its bad accuracy means it can't at all deal with spitballers and breeders at a distance, and even leeches are iffy since your rounds can go right past their grasping arm even at point blank. It sucks at dealing with naedocytes. The minigun again deals with all of this better. You can easily pick off spitballers using the weakpoint, and shoot down the spitballer projectiles. You can laser focus on the breeder weakpoint and shoot down all the naedocytes. Bullet hell improves this even more by adding the ability to quickly check for leeches without needing light, and mopping up naedocytes and swarmers without even needing to look at them. This means you can now escape into an unexplored cave without needing to gamble on a leech not being present. With hot bullets and volatile bullets a minigunner can empty a cave of threats very rapidly, whereas the autocannon is at the mercy of the cave generation to give it small caves to clear.

On top of all of this the autoacannon has a bad combat loop, and poor synergy with secondary weapons. The autocannon is designed as a crowd clearing AoE weapon. This holds up fine on hazard 5 even up to double enemies. However the downside is the 5 second mandatory reload you can't get around. During this time the gun is non functional, the only damage it can deal is toxin you have previously already set with Neurotoxin Payload. Without the enemy speed buffs and numbers, on haz 4/5 you tend to get a trickle of trash enemies, then a few slow praetorians behind that are easy to kill in isolation. This is not the case in haz 6x2, the grunts are constant, and the praetorians will be a part of their wave which means you need to deal with them at the same time as the grunts. In tunnels their acid spray can actually be dangerous. If you do not clear them quickly more will catch up and start spraying till you wind up with 5-6 praetorians 2-3 oppressors all mixed in with grunts. In tight spaces this is a death sentence. Whether or not you have time to reload is almost entirely a matter of luck or burning shields. A damage oriented minigun build can clear them itself just fine, and bullet hell with elephant rounds or volatile bullets can stunlock and execute them with no problem. You also tend to be up close and brawling anyway since you are trying to maximize aggressive venting, which makes weaving in power attacks easier. Crowd control autocannon builds will struggle and eventually get zoned off with too many acid/oppressor attacks going off and get killed by a spitter or slasher. To combat this you need to take fear to turn praetorians around, and elephant rounds to kill them quickly. Now the issue is that on haz 6x2 you don't have that freedom, since when you are reloading you are completely helpless and will be killed or heavily damaged in that 5 seconds without a strong crowd control secondary such as hellfire, electro mines or maybe explosive magic bullets. The minigun gets around this by covering for itself while overheating with aggressive venting. The damage and space that venting creates is as if you never stopped firing, in may cases its actually a lot stronger than if you had just been firing that whole time. Combined dash/vent/stun/bullet hell/shield is a perfect combat loop with plenty of survival and tools that all chain together smoothly. You don't need any other tools which frees your secondary slot up to pick elephant rounds or volatile bullets to finish off the build and handle any threat. On top of all that, the minigun also has the option of just not overheating. You are in charge of your heat buildup and can change your firing rhythm to control when, or if you overheat at all.

Now... lets talk about consistency. On hazard 6x2 the wave timer is extremely tight. Only giving you 1-2 minutes at at time without a wave or swarm. Relying on the autocannon to clear takes a lot of time, even with its strongest OCs. Neurotoxin requires a lot of waiting around for the damage over time to kill things. And Big Bertha requires you to be in a state of perpetual reload since the magazine is so small. You spend a lot of time kiting backwards away from spawns waiting to reload or for them to die to toxin. Once you manage to clear and push forward the next wave is often times spawning, trapping you in a perpetual loop of combat. Minigun with stun and aggressive venting can much more consistently push into and through a swarm to get to the other side. Using a shield to collect nitra in the next room if needed. The autocannon will usually need that shield to push through in the first place. In general this means the minigun can complete runs more consistently than the autocannon because you can breach into caves faster, spend less time running from swarms, and generally are quicker.

This is not all saying the autocannon is unusable. Its just a much worse designed weapon than the minigun. With sufficient skill with kiting, and some luck you can make it work solo. And on teams NTP is very usable, but its still just a weak version of sticky fuel driller. You are always better of bringing sticky fuel and a minigun over NTP. Minigun will always give you more flexibility and options in any given situation.


r/technicaldrg • • Apr 09 '23

build BUILD BREAKDOWN: "Vanilla" Hurricane [MODDED: 6x2]

160 Upvotes

A breakdown of Vanilla Hurricane

Written by waste

Vanilla Hurricane — a Hurricane build that takes clean overclocks — is an underrated alternate option to Leadstorm, providing convenient swarmer and Naedocyte self-defense, decent crowd clear, and more consistent ranged ignition. It has 2 good cleans: Overtuned Feed Mechanism and Fragmentation Missiles provide variation in feel and build choices which grant gunner powerful self-sufficiency.

Why Vanilla Hurricane?

Hurricane is most often taken in modded with its other overclock options, Jet Fuel Homebrew and Minelayer System. These overclocks provide extreme single target damage and extreme crowd clearing potential, respectively. Crucially, though, they both suffer greatly when taking Napalm-Infused Rounds in tier 5. Vanilla Hurricane, while likely not as powerful as the above options, provides an interesting and flexible alternative to Burning Hell Leadstorm in team compositions, and a potent solo waveclear tool.

Suggested Builds
Solo/pub sustain stun: 31112 Overtuned Feed Mechanism
Sustain ignition: 31121 Overtuned Feed Mechanism
Team ignition: 31221 Fragmentation Missiles

Tier 1

In tier 1, our options are Missile Belts, for +72 max ammo, Pressurized Gas Cylinder, for +4 direct damage, and Increased Blast Radius, for +0.8 AOE radius.

  • Right off the bat, we can dismiss ammo as an option. Hurricane already has extremely good ammo economy, to the point where you have to try to run out of ammo, especially in a modded context. On top of that, you have the opportunity cost of sacrificing missile efficacy by taking this mod.

  • Damage versus AOE is a more interesting comparison, with damage providing an 8-missile Praetorian/Oppressor ignition breakpoint for Overtuned Feed Mechanism. However, Vanilla Hurricane’s single target damage isn’t great (especially compared to the monster that is Volatile Bullets), so taking this over the massive +0.8 AOE that Increased Blast Radius gives is, in the vast majority of cases, not worthwhile. The bulk of your crowd control in modded comes from the AOE and especially fire spread if you take Napalm, making the AOE the clear choice.

Take option 3.

Tier 2

In tier 2, we have Bigger Jet Engine, for +60% extra projectile velocity and +125% extra turn speed, and Anti-Tank Missiles, for +100% Armor Breaking. As with many armor break mods, Hurricane’s is slightly dysfunctional due to its AOE component and barely helps against shellbacks. The extra missile maneuverability, on the other hand, augments the responsiveness of the weapon and makes it an even more potent ranged ignition source.

Take option 1.

Tier 3

An overclock-dependent choice, tier 3 offers Nano Missiles and Improved Feed Mechanism, for doubled magazine size or +1 rate of fire, respectively.

  • Improved Feed Mechanism is extremely impactful going from three rate of fire to four, as is the case for Fragmentation Missiles. A 33% boost in DPS is huge; it massively reduces ignition time and allows the Hurricane to actually put its massive ammo pool to use. On Overtuned Feed Mechanism, this overclock tends to make one fire more than necessary if Napalm is taken, but feels great when paired with stun.

  • While impractical for Fragmentation Missiles, Nano Missiles shine when paired with Overtuned Feed Mechanism, providing much greater sustain while retaining most of Fragmentation Missiles’ crowd control. I prefer this mod with OFM, though rate of fire is also usable.

Take option 2 on Fragmentation Missiles, and either with Overtuned Feed Mechanism.

Tier 4

Another fairly mod-dependent tier, especially since the +50% weakpoint damage from Shrapnel Load doesn’t apply to heat, while Zip Fuel’s +4 AOE damage does.

  • While 50% extra weakpoint damage is a hefty amount, Vanilla Hurricane’s single target DPS with Napalm still ends up being very lackluster, even with both direct damage mods. Taking this mod buffs bad to mediocre, which altogether is not very useful, given that most of the time your secondary will provide LST DPS.

  • With stun, you end up having a lot more opportunities to hit enemies in the weakpoint productively, as fire will constitute much less of your crowd clear. This ends up having a pretty strong effect on breakpoints, buffing Hurricane’s direct damage to pretty decent levels. Furthermore, stun makes it easier to hit weakpoints, meaning you’ll be able to hit weakpoints more often than not.

  • Zip Fuel further increases Hurricane’s ignition and crowd control power.

Take option 1 with stun, and option 2 with Napalm.

Tier 5

As with many guns, this is the single most build-defining mod tier. For Hurricane, we’re offered a choice between Napalm-Infused Rounds, which converts 33% direct and area damage to heat, Uncontrolled Decompression, which gives a 25% chance to stun for 3 seconds, and Nitroglycerin Compound, which adds +1 area damage per 0.75 seconds of rocket airtime.

  • Immediately, we can discard Nitroglycerin Compound as useless. The only times your rockets will be in the air for more than a second or two is if you’re sniping a stationary across the room. Even if this mod gave quadruple the area damage it does currently, it’d still be next to useless, given you discard the extremely potent stun and Napalm mods for a highly, highly situational minor damage boost.

  • Next we come to Uncontrolled Decompression, which is a real mod option. It’s a non-starter in modded team compositions, given that gunner's primary almost always needs to be an ignition source for Volatile Bullets. Furthermore, the crowd control it offers is often perfunctory if you have a real driller, aside from its ability to shut down Mactera swarms. However, it shines in solos and pubs, offering much greater on-demand self-defense compared to Napalm. Its biggest weakness is that it… doesn’t ignite. This forces either incendiary nades as an ignition source or a non-VB secondary. Stun thus sacrifices the pushing power and mobility that Napalm has in exchange for much greater crowd control and self-defense.

  • On the other hand, Napalm-Infused Rounds tends to lack real self-defense. Having no stun means Mactera swarms will most often get a volley or two off — likewise with Menaces, Praetorians, and Acid Spitters. Veterans will push you hard and fast, meaning without a team to support you, one will have to give up a lot of space or be forced to drop a shield when faced with swarms. In exchange, Napalm grants the Hurricane greater ammo economy due to fire spread and an extremely flexible and mobile ignition source.

Take options 1 or 2.

Secondary and Grenades

The secondary should offer large single target damage to compensate for Hurricane’s lack thereof. Volatile Bullets should always be taken with ignition Hurricane; it compensates for Hurricane’s lack of single-target DPS by offering the arguable best in the game. With stun, things get a little more nebulous. Hellfire, which doesn’t synergize with Hurricane in any tangible way, remains one of its best options nonetheless due to sheer power. Elephant Rounds, on the other hand, is a slightly unwieldy budget Volatile Bullets which fulfills its role to some extent.

If not taking VB, leadburster is likely the best in slot option if you can’t rely on your teammates to kill detonators for you. Otherwise, the choice is as it is with any other gunner build: incendiary offers the most ease of use and crowd control while clusters are the most flexible overall, but require more thoughtful placement.

Playstyle and Tips

The choice between Fragmentation Missiles and Overclocked Feed Mechanism is largely one of preference. Fragmentation Missiles has better swarmer and naedocyte clear and better ammo efficiency overall. Overclocked Feed Mechanism grants greater DPS or sustain, depending on the tier 3 mod taken. Both are fine options, depending on your individual playstyle and needs.

Stun Hurricane is, in the grand scheme of things, as straightforward as things get. Hold M1, everything gets stunned. Aim at the enemy, and it dies. You’ll only really be pulling out your secondary for LSTs and stationaries, as stun Hurricane shreds through grunts, swarmers, Naedocytes, Spitters, and Mactera alike. If taken for a modded team comp, stun Hurricane has the ammo economy to still hold M1 comfortably, filling the backliner role that gunner usually inhabits. However, with a driller this isn’t particularly useful in modded team comps given the lack of ignition for Volatile Bullets. Thus, stun Hurricane should be relegated to meme runs, pubs, and solos.

On the other hand, Napalm Hurricane offers a much more interesting dynamic. Unlike the typically-run Burning Hell, Napalm Hurricane’s utter lack of stun makes it a high risk, high reward option.

  • Hurricane’s ignition is much more flexible and mobile — it doesn’t require the gunner to devote several seconds heating up the weapon to ignite something that’s across the cave.

  • Leverage your increased self-sufficiency in ignition, swarmer/naedocyte defense, and crowd clear abilities to aggressively push for Volatile Bullets picks on spitballers, menaces, and other HVTs. Napalm Hurricane excels at reducing the attention economy cost of VB upon the rest of your team — the gunner can ignite anything they want with great fidelity, and as a result has much greater independence.

  • Its high time to kill and lack of stun means that against Acid Spitters and Mactera, you’ll have to either simply dodge everything, use your secondary, or pop a shield. The latter two are wildly impractical, especially in team compositions, where the gunner’s resources are vital in keeping a team alive. Thus, Napalm Hurricane requires fairly solid mechanics and situational awareness. Ranged enemies, as always, are a priority.

  • Pull out your secondary while your missiles are traveling towards distant targets to get a head start on aiming. The rockets’ travel time means it can be easy to spend too many rockets. Having VB aimed pre-ignition keeps your cursor on the enemy (so your rockets can actually reach them) and also ensures you kill HVTs as soon as possible.


r/technicaldrg • • Jul 14 '22

guide Dirt : The definitive guide

109 Upvotes

Why to dig dirt like a pro

This short guide will teach you the secrets of dirt whispering. Have you ever seen a driller plow into a dirt patch blindly, only to drill the wrong way? Embarrassing. Have you ever seen a dwarf standing by a dirt patch wracked with indecision looking at the terrain scanner wasting precious SECOND? Embarrassing. Don't let these be you. Learn the secret art of the dirt whisperer today.

How to dig dirt like a pro

Dirt patches usually follow a set pattern. Imagine a dirt patch as a sphere of dirt, that get two ice cream scoops taken out of them on opposing sides, leaving only a small barrier between the rooms. The lower halves of the scooped out sections are filled in with dirt to give the dwarves something to walk on as they dig through. The carved out of space isn't a perfect circle, it often leaves one or more seams on the dirt, which you can use to figure out where to dig.

If there is a single seam made from three lines, then this is essentially an arrow pointing to the next room. Here are a few examples of the triple line seam making it easy to know where to dig. The light from the flare in the first two clips casts shadows into the seams making them easier to see. https://youtube.com/clip/UgkxH8L07PVv21L2_VNjJ6uKuTgZupcb07Yw https://youtu.be/I8RNjtxQpFQ This one is a little harder to see, the dark spot from the flare is still visible - https://youtu.be/0HvHv_lpTfY

Another trick you can use to double check you are going the right way is to dig down to the biome layer. If you are going the right way it should be a flat line. If it is an arc, then you are off center. Redirect toward the direction center of the arc points. In the clip below I go straight through the triple seam like normal, become unsure that I am correct and make my tunnel go down a little bit more until I uncover the biome layer. The biome layer is indeed an arc pointing slightly to the left, so I change directions until the biome layer is flat and find my way through. https://youtu.be/4y91xw-KsM8

This trick doesn't work for driller since he drills through so quickly there is no time to see the biome layer and redirect. You just have to pick your direction and angle and hope you are correct or look like a fool. Luckily there is a way from the previous clip that I can tell I need to go slightly left without checking the biome layer. Rewatch the clip, and pause at 0:00. https://youtu.be/4y91xw-KsM8

Notice the density of the dirt speckles on the left is slightly higher than on the right. In this case the turn left is very slight, so the density difference is very slight. As you get farther from the center of the dirt sphere the dirt speckles get smaller and smaller. If you compare the size of the speckles just outside the dirt, the ones on the right are all much smaller than the ones on the left.

This is less foolproof since it can be hard to tell sometimes, but in that case its usually mostly straight, and driller has a wider margin for error since he digs a wide tunnel. Here are a few examples of driller finding the seam, and drilling in the direction the dirt speckles indicate.

Speckles indicate straight, I go slightly to the left not quite on the seam and still make it through no problem, going straight through the seam would have been dead on - https://youtu.be/LF98LVvk49o

Speckles indicate slightly left, I hear the dread sound of digging in the biome but I keep on course because I believe in the dirt whisperers teachings - https://youtu.be/5foEGTsVXQk

Sometimes there is not a clear vertical seam. There are a couple options depending on what it looks like. Here is an example of what looks like a few spots there is almost a vertical seam. I chose one at random and dug down to the biome layer and let that tell me which way to go. I also could have looked at the speckle density here, it clearly indicates that I need to go left. But you can only use that trick if you remember to check as you are approaching. Backing up to check the speckles again is almost as cardinal a sin as getting out the terrain scanner. https://youtu.be/TjDRbYsFxx0

Exercises for the reader

Watch the following clips and try to guess the direction to drill before it is revealed.

  1. https://youtu.be/Sjw4h8F_ng4

  2. https://youtu.be/alq9xO8qYAY

  3. https://youtu.be/qk3cWyfDg78


r/technicaldrg • • Apr 15 '24

build BUILD BREAKDOWN: Scout's Jury-Rigged Boomstick

104 Upvotes

Intro

The Jury-Rigged Boomstick is a strong secondary weapon in both solo and team gameplay. It provides a burst of damage and utility on demand, combining raw damage, ignition, stun, blowthrough, and ranged effectiveness into a single, flexible, instant package.

The main use cases of the boomstick are substantially different in team versus solo play.

In solo, the boomstick is an important source of AOE damage which is lacking in many of Scout's primary weapons. If you want to clear bugs in solo, the boomstick will let you do it - and with fire spreading between densely grouped bugs, horde clear can be achieved with surprising ammo efficiency. You can also use the boomstick to instantly ignite Praetorian gas clouds for a big burst of AOE fire and ignition. Fire Bolts fill a similar solo niche, and are easier to get firespread value with, but lack the same AOE stun and burst damage. The boomstick also offers Scout's best instant group killing tool in the Double Barrel overclock, which we will touch on later.

In teams, a general rule is that the job of horde clear can be done much more quickly and ammo-efficiently by the rest of the team. Therefore, while you can still use the boomstick to get a few bugs off of you, its main role is substantially different. In general teamplay, it can help chunk down the most dangerous enemies, while providing instant relief in the form of stun. But there's an even more powerful use. Despite the boomstick's seemingly wide spread pattern, it can ignite some enemies at surprisingly long distances. This allows for a simple and devastating teamwork tactic where you light up an enemy, and your Volatile Bullets gunner promptly obliterates it. Frequent targets for this strategy include Spitballers, Breeders, Menaces, and Goo Bombers, though of course it is not limited to those.

What, specifically, does the boomstick do? When you pull the trigger, you get a spray of hitscan pellets in a random spread. With a good build, these pellets will penetrate through several enemies and deal Kinetic damage, Fire damage, and Heat to all of them. (The heat will apply even through heavy armor, which blocks other damage types). Each pellet has an independent 30% chance to stun on hit. You also get a small "shockwave", which is a burst of Explosive area damage in a modest area in front of you - good for popping groups of Swarmers. The shockwave area covers a pill shape, where the rounded tip of the pill extends out to 4m in front of you, and the diameter is 3m. It ignores armor and has no falloff.

Build breakdown

The standard boomstick builds tend to look like X1X13. There are a number of resources already around to explain why these are taken, but I'll explain things again here for completeness.

Go-to upgrades

  • T2a: Double Trigger lets you dump both shots quickly, letting you get in and out faster and have a better chance of stunning an enemy sooner. This makes it usually preferable. Besides, you don't always need more than two shots in a short time. When firing quickly, your second shot will be displaced upward by recoil, so at long range you may want to either learn to compensate, or slow down to recover from the recoil between shots. At close range, however, you can just mash out both shots and hit totally fine without particular effort. This upgrade is less essential than the next two.

    • Exception: Since Double Barrel only has one shot per magazine, Double Trigger is useless and Quickfire Ejector is always better for it.

  • T4a: Super Blowthrough Rounds provides a ton of value, letting you stun, ignite, and damage many more enemies much faster and more ammo efficiently. Fire spreads much better when multiple enemies are burning in a small area. Blowthrough also prevents your targets from being able to hide behind other bugs.

    • Exception: Since Double Barrel gives an extreme blast wave buff, it usually takes the Blast Wave upgrade instead. Plus, its bigger spread makes the pellets worse at hitting enemies anyway.

    • Exception: Since Shaped Shells is specialized into long range single-target instead of close range swarm clear, it is uniquely able to benefit from Armor Break without missing Blowthrough as much as other builds.

  • T5c: White Phosphorus Shells changes half of the damage to Fire, which increases your effectiveness against fire-weak enemies such as Mactera and Spitballers. And of course, there's the power of ignition for firespread and Volatile Bullets synergy. A no-brainer.

Actual upgrade choices

  • Tier 1: A simple choice of ammo (1) versus damage (2). Note that T1 ammo gives less than T3 ammo, and T1 damage is weaker than T3 pellets. Damage is most popular on clean Boomstick builds, while ammo is more preferred with the unstables, which already have damage buffs. Shaped Shells can take either option.

  • Tier 3: A bigger choice of ammo (2) versus pellets (3). This is similar to Tier 1's choice, but both options here are stronger than their Tier 1 equivalents. The pellets upgrade is extremely strong, being essentially a 37.5% damage increase. The higher pellet count also increases shot consistency (helping to counteract the randomness of the spread) and adds more chances to stun enemies. The ammo upgrade is strong as well, giving more than T1 ammo does. The third upgrade, Improved Stun, isn't nothing, but generally gives much less value than the other two. Due to its strength, the pellets upgrade is preferable on all non-unstable builds, and sometimes even on Jumbo Shells.

Overclocks & Recommended Builds

In summary: Double Barrel specializes in close range solo brawling. Shaped Shells specializes in picking out single targets, and hitting at long range. Everything else is a generalist.

Compact Shells (clean overclock)

A generalist overclock that provides ammo so you can take both damage upgrades (21313). It has plenty of both ammo and damage, and is good in both solo and team play. The reload speed buff is also nice. I will use this as a reference point for comparing other overclock builds.

Jumbo Shells (unstable overclock)

Another generalist, providing damage so you can take both ammo upgrades (11213). This build performs extremely similar to the Compact Shells build, but with a smidge more ammo, a slower reload, and it's concentrated into fewer pellets. The lower pellet count gives more variance, which means it's easier to get a lucky hit far away, though its range is still much shorter than Shaped Shells. Of course, the variance can be a double-edged sword, causing you to miss an ignite or stun at range.

Alternatively, you can lean into bigger damage and less ammo with 21213 (ammo+damage) or even further with 11313 (ammo+pellets). The full damage build, 21313, is not often taken with Jumbo because the ammo gets quite tight, and it tends to kill things outright which makes fire spread more difficult.

Because of the reload speed penalty, learning to reload cancel is most relevant with this overclock - though not truly needed.

Stuffed Shells (clean overclock)

Another generalist, but its benefit is slightly weaker than either Compact or Jumbo. Compared to the Compact Shells build, Stuffed Shells 11313 has less damage and 21313 has less ammo. Nevertheless, the overclock is by no means bad.

Special Powder (clean overclock)

Less combat power than any of the above, but it gives substantial mobility and is therefore still a popular sight in modded lobbies. Aside from having lower stats compared to other overclocks, Special Powder also can't easily be shot while jumping around - a very common movement pattern to reduce melee danger in high difficulties. In exchange, you get flexibility to bounce around the cave completing objectives, get out of danger when your grapple is on cooldown, save fall damage, and maneuver in ways that would otherwise be difficult. When there's no convenient grapple target in the direction you want, or you're at the bottom of a 40 meter pit, Special Powder comes in very handy indeed.

Full damage 21313 is probably best (giving the same performance per shot as the Compact build, but with less ammo), but any ammo/damage combo is viable if you want to lean into the mobility aspect. Popping both shots quickly with Double Trigger will allow you to fly faster and farther, but requires more confidence in your aim. I find that I still finish reloading before I hit the ground, even without the reload speed upgrade.

Double Barrel (unstable overclock)

Great close range specialist when taken with the shockwave upgrade - 12233. It instantly deletes all grunt variants and many medium-sized bugs including stingtails, and has a shockingly large amount of ammo. Do note that you will be relying on the shockwave to deal most of your damage, as you aren't taking damage upgrades or blowthrough, and the biggest bugs often have Explosive resistance. The increased spread makes it very weak at mid to long range, which means Double Barrel isn't great for team roles. However, it's great in solo when paired with a ranged primary. Try using IFGs, pheromones, or just a good old fashioned choke to increase bug density for maximum blast wave value.

Shaped Shells (balanced overclock)

The in-game description doesn't say this, but Shaped Shells reduces the spread area by a factor of fourteen. It hits like a truck at long range when every other overclock would be too dispersed. Hitting all your pellets means you are free to take tier 1 ammo to offset the overclock's ammo penalty, while still having incredible stun/damage/ignition power. The tight spread does make it pretty bad against groups at close range. But since you won't be using it much against groups, it's viable to take tier 4 armor break instead of blowthrough. (This is most useful if your primary somehow doesn't cover armor break - such as if you're taking the Drak-25 Plasma Carbine.) To summarize, 11313 and 11323 are great options.

Technical analysis + tips

The Boomstick has a complicated pellet spread. The crosshair makes it look like a rectangular area, and it is, but the rectangle is bigger than you think. (You may have noticed an occasional pellet landing outside the crosshair.)

There is a heavy bias toward the center of the rectangle. I don't know what the exact mathematical description of the bias is, but I image-processed a bunch of screenshots to get some empirical samples of the vertical and horizontal spread patterns. I also tried guessing what the actual curves were and then fitting them, but I doubt I got them right. Anyway, here are the results: https://imgur.com/a/PMi7lJE (For each image, the first plot is the horizontal distribution and the second is the vertical distribution.)

We can then use these empirical distributions to make performance vs range graphs for a few different builds: https://imgur.com/a/i0Xs0eZ Note how close-range biased Double Barrel is, and how good Shaped Shells is at long range. Some extra notes on these graphs:

  • Brown dashed lines in the first graph show ignition breakpoints.

  • 21313 Special Powder, 21313 no overclock, and 21313 Compact Shells perform the same. Compact has 16 mags worth of ammo instead of 13.

  • The curves are calculated based on a fairly small target, 2m wide x 1m tall. So, big enemies like Breeders will be easier to ignite than the graph says.

  • The colored areas should give a sense of how much your results will be affected by pellet randomness (you have a 50% chance to perform within the colored area).

  • The blue and green curves overlap in the second and third plots.

  • Recoil displacing the second shot is not taken into consideration.

On a slightly less useful note, here's some trivia about the crosshair:

  • It's smaller than the actual spread range, though most of the pellets will land inside it.

  • Ok actually, the Shaped Shells crosshair is about right, but it depends on your field of view.

  • Did I mention the crosshair scaling doesn't account for your field of view? It's always just based on the size of your game window.

  • There's a little pair of blips on the sides of the crosshair that show you how many shots are left in your mag. You can also see this by looking down at the weapon, or at your ammo counter, or just keep track of it in your head, but they're there. (They don't show up for Double Barrel.)

  • Sometimes the Shaped Shells crosshair bugs out and reverts to the normal wide boomstick crosshair. Don't worry, the reduced spread will still apply, it'll just be slightly more annoying to aim. There is no known fix.

Other resources


r/technicaldrg • • Apr 15 '24

breakdown Thermal Exhaust Feedback: A Monster in the Third Slot (Scout's Drak-25)

104 Upvotes

Introduction

Thermal Exhaust Feedback (TEF) is by far the strongest overclock for the Drak-25 Plasma Carbine. It offers incredible damage, ignition, electric slow/DOT, and decent accuracy when built with 3x112 - pretty much all Scout could ask for in a primary (except stun/fear - and to get armor break you have to give up the powerful electricity upgrade. Alas, we live in an imperfect world). It's not a particularly hot take to say that TEF is Scout's strongest primary option in solo modded play. Meanwhile, for modded teamplay it's a strong alternative to the M1000 Classic.

TEF's distinguishing feature is its big damage. You can shoot it at anything. High-value targets (HVTs) are traditionally Scout's focus in teamplay, but TEF does enough DPS to burst down just about any enemy, while having a pretty good ammo pool to back it up. In particular, it's much better than the M1000 at deleting tanky stationary enemies like Spitballers and Breeders.

How does it accomplish this? TEF adds increasingly large bonus Fire damage and Heat to every shot when your weapon heat exceeds 60%. At full heat, your damage is more than doubled. Therefore, the fundamental thing to understand about TEF is that it's a weapon where you want to keep the heat high by firing multiple bursts at enemies without cooling all the way down. Doing this successfully, without overheating or getting hit by bugs, takes practice and game sense. But, it rewards you with incredible damage output.

The Weapon Heat Crosshair mod helps immensely with managing your heat level. It also makes it easy to estimate where important numbers like 60% and 80% heat are, with just a glance. I like to make it quite big on my screen, like a full 5 cm in diameter, to make it easier to distinguish between the highest heat percentages. But do whatever works for you.

Build

Summary: Start with 32112. If you play a few games and find that you want more ammo, you can move to 31112.

Tier 1: Rate of Fire / Less Heat per Shot / Higher Velocity

  • Rate of fire is fine, giving better burst DPS and letting you heat up sooner, in exchange for requiring a bit more timing precision to avoid overheating. If you care more about stationary targets than moving targets, this is a solid DPS upgrade.

  • Less heat per shot is a bad match for TEF - it allows you to get longer bursts, but also makes it painfully slow to heat up into the zone where your DPS is actually good. I don't recommend this.

  • Double projectile velocity feels great. The base drak projectile velocity is quite slow, making it difficult to track targets. Also, the slow base speed means it takes a moment for shots to reach your target, which increases time to kill and makes it easy to accidentally waste extra shots on overkilling. This upgrade increases the speed from "dismal" to "satisfactory".

I strongly recommend option 3: faster projectiles, though if you want to mostly shoot stationary enemies, rate of fire is a good alternative..

Tier 2: Ammo / Damage

As we will see later, ammo doesn't lose many significant "breakpoints" and doesn't actually do much less DPS. However, the base ammo pool should already be plenty if you shoot judiciously (a good habit to learn for Scout in teams), and a bit extra DPS is always nice.

Start with Damage, but feel free to switch to Ammo if you find the ammo a bit tight.

Tier 3: Accuracy / Faster Cooling / Hot Feet

  • Accuracy decreases your spread by 70% both vertically and horizontally, resulting in a 91% smaller spread area. This significantly increases your effective range. I don't know what the base spread value is, but targets like stingtail and menace weakpoints become difficult to hit beyond 10-15 meters without this upgrade.

  • Faster cooling is a tradeoff. You get better sustain DPS, but it becomes harder to keep the weapon hot, especially if you want to quickly reposition or snap a shot from your secondary.

  • Hot feet makes you move faster when the weapon overheats. This has no use case with TEF, because you should not be overheating.

I strongly recommend option 1: accuracy.

Tier 4: Electricity / Plasma Splash / Armor Break

  • Electricity inflicts 135 total electric damage over 6 seconds while applying an 80% slow. This is a powerful effect - the total damage is quite hefty, and the slow is extremely useful against problem enemies like Bulks and Grabbers. The chance to apply is 15% per shot, not 20% as the equipment terminal says.

    ShotsChance of electricity
    448%
    873%
    1490%
    37 (max without overheating)99.8%
  • Plasma Splash replaces 5 of your direct damage with area damage. This makes you slightly better against armor and substantially worse against weakpoints, especially when at low heat. Not very useful.

  • Armor Break improves your armor breaking from 100% to 300% (of your base, non-fire damage). It's alright.

I recommend option 1: electricity.

Tier 5: Manual Heat Dump / Faster RoF when Hot

  • Manual heat dump lets you trigger an overheat at any time, in exchange for the overheat lasting shorter than normal. You don't want to ever overheat with TEF, because the overclock increases overheat time, and also overheating will drop you at the bottom of the heat curve where you have to heat up again to start getting good DPS. It's always better to just release the trigger and let the weapon cool to like 80% before shooting again.

  • Faster RoF when hot is some nice extra DPS. It also gives a fun bit of audio feedback to let you know when you're approaching the toasty TEF zone.

Take option 2: Faster RoF when hot.

Analysis & Usage

TEF is a weird weapon to analyze. It's tricky to think about breakpoints because it's a high rate-of-fire, low damage-per-shot weapon whose ROF and damage also change as you hold down the trigger. Plus, it runs into RNG effects such as spread, armor break, electricity, and On Fire damage procs. Thus, the analysis is by nature going to be a little analog and a little fuzzy. Nevertheless, by crunching some numbers and plotting some curves, we can gain useful insights into the weapon's performance and usage.

Because TEF is all about firing bursts and staying hot, I think it makes the most sense to frame the analysis around those bursts. Here, I assume a burst ends just before overheating, and I'll allow the starting heat level to vary. I'll give you some graphs where each data point measures the properties of an entire burst - not just the momentary performance at one particular heat level.

To start off, I've included plotted analysis of the 32112 and 31112 builds. Here are the plots we will use. The next few subsections will refer to them.

The plots all share the same x-axis, which is the heat level as shown by the weapon meter at the moment a burst starts. At the bottom, you can see how this corresponds nonlinearly to the number of shots fired due to the Drak's wacky heat scaling. As your heat meter gets higher, it will increase more slowly. The heat level is the easier thing to see and work with in game, so it's more useful to draw the graphs based on heat than something like number of shots. Incidentally, for the standard TEF build (without t1b), the number of shots scaling looks like this:

Shot numberMilestone
15th50% heat (t5b rate of fire bonus start)
18th60% heat (+3 fire damage from TEF)
21st70% heat (+6 fire damage from TEF)
25th80% heat (+9 fire damage from TEF)
30th90% heat (+12 fire damage from TEF)
38thOverheat

Breakpoints (Graphs 1 and 2)

Breakpoints (or burstpoints?) are tricky with TEF due to the previously mentioned random factors. In this analysis, I've calculated them numerically for Haz6p4 using the same Python script that generated the graphs.

Assumptions: The math ignores performance gained from electricity, fire DOT, and light armor getting broken. However, it also ignores performance lost to inaccuracy and imperfect heat timing, such as stopping at 95% heat versus 99% - though I actually tried that analysis and the results were basically the same.

The first plot shows the shooting time for each burst, as well as the time it would take the weapon to cool back to that initial heat value. The second shows how much damage you can get in one burst before reaching max heat. Together, this should give a decent overview of the breakpoints. The second plot really shows you how crazy TEF's heat scaling is: half of a burst's damage occurs before reaching ~77% heat, and the other half occurs after. Another way of looking at it is that going from 77% to 99% twice is equivalent to going from 0 to 99%. (Against fire-weak enemies, it's even more lopsided).

Note that breakpoints can be reached in more than one way. If you're starting from zero, you'll heat up with a long burst. Or, maybe you're not starting from zero. So, the points on the graph may not match up exactly with every situation. But either way, once you're in that 60%+ zone, you should ideally stay in it for maximum sustain DPS.

If you're coming from a standard M1000 Classic focus build, there's a rule of thumb you can use to help get a sense of TEF burst size. A burst going from 80% to 99% heat is a good size to think about. It's a bit stronger than an M1000 focus shot, after accounting for the M1000 punching through light armor or activating its t4b weakpoint upgrade. So, if you can kill an enemy with one focus shot, you can definitely kill it with an 80% burst. If it's unarmored or fire-weak, you can probably even kill it with a 90% burst.

An 80% burst is also plenty to ignite all the common Volatile Bullets targets. (Aim away from breakable weakpoints to save them for the VB shots.) Ignition breakpoints are not included in the graphs.

Notes on particular breakpoints:

  • Patrol bots don't overheat in one burst, and I'm not super sure how their cooling mechanics work. In practice, TEF can kill bots by either ignition or direct damage, depending on how many shots hit the small weakpoint.

  • By taking T2 ammo, the main breakpoint you lose is the 4-player Hazard 6 spitballer "one-mag". However, as long as you land most of the weakpoint shots, the baller will be finished off by electricity and On Fire ticks. If you want it dead immediately, it takes about 1 extra second to get another burst out at 90% heat.

  • For breakpoints toward the left of the graph, like spitballers/grabbers/wardens, they need you to hit almost all your shots or you won't kill the enemy in one heat cycle. As mentioned in the previous bullet, missing the one-mag will only lose you ~1 second TTK, because you can finish the enemy with a second burst at 90% heat. So it's not terrible. Starting from a hot weapon, and shooting two bursts from 70%, will be more consistent than one burst from 0%.

Efficiency (Graph 3)

The third plot shows average damage per shot in a burst. You can think of this as a measure of ammo efficiency - staying at high heat (85%+) will let you squeeze out the maximum damage from your ammo, while dipping down to 60% or lower will give more flexibility and ease of use. The amount of ammo "savings", based on the graph, looks to be roughly comparable to taking the ammo mod vs no upgrade.

DPS (Graph 4)

The last plot shows the DPS in a single burst as well as in sustained fire (repeated bursts including cooling time). Two other popular DPS primaries are shown for comparison. Note that I'm showing weakpoint bonuses for the competitors, which TEF doesn't have, while TEF's unique bonuses against fire-vulnerable enemies are not shown. Perfect accuracy and zero overkilling are assumed (which means the Hipster stats are a bit optimistic compared to AISE, while TEF is somewhere in the middle in terms of realism).

There's a nice plateau in TEF's orange curve, indicating that if you start your bursts anywhere from 60-90% heat and go to 99%, you'll get pretty similar sustain DPS. Very short bursts at the absolute highest heat have low sustain DPS, because the gun doesn't start cooling right away, so much of your time is spent waiting to cool. (You can actually use this to maintain your heat by tapfiring one shot every 0.35 seconds until a new target shows up. It's quite ammo-efficient, though perhaps not the best use of your time.)

The other notable finding from this graph is that despite TEF's performance jumping in intervals of 10% heat, its overall burst DPS curve (blue) is very smooth - there is no need to keep track of where exactly the bonuses trigger, or to micromanage those thresholds.

The green curve is the only thing in this entire graph series that shows TEF's performance at one instant, as opposed to over an entire burst.

Bonus: All Possible Bursts

This extra plot shows the damage done by every possible burst, as defined by starting and ending heat percentage. You can also see which bursts hit various breakpoints. Again, it's insane how quickly things die when your weapon is hot. By comparing the graphs, notice that the damage and ammo builds only tend to differ by 1 or sometimes 2 shots for most HVTs.

Quirks

Some testing has revealed a few extra things about TEF that the graphs didn't:

  • Only the base drak part of the damage counts toward breaking weakpoints. The fire portion of the damage, which is often half or more of the total, will get weakpoint bonuses without breaking the weakpoint. Volatile Bullets bulldog has very similar behavior, dealing massive damage to Bulk Detonators while not immediately popping their blisters. This likewise makes TEF a decent source of damage against breakable weakpoints, especially if you stay at high heat and/or take the ammo mod. Do be careful though, because it's still easy to pop Goo Bomber and Menace weakpoints before they ignite, which means your gunner will have a harder time VBing them. If your goal is ignition, aim for the body.

  • The bonus fire damage does not count toward breaking heavy armor. TEF feels pretty bad against armored enemies with t4a, and this goes some distance toward explaining why. It's not the end of the world, but it sure would be nice to have an instant answer to stingtails and similar enemies. In solo, 12233 Double Barrel boomstick will absolutely delete them in one click. Or, you can use Shaped Shells boomstick with tier 4 armor break, which works great in teams too.

Summary and Key Insights

  • Shoot in bursts while keeping the weapon hot.

  • Because of the time to heat up, TEF rewards somewhat longer sequences of shooting rather than grapple-hopping around to pop only one or two enemies at a time. That, plus the lack of stun/fear, makes it a bit less safe to use than the M1000, but in return, it hits harder and dishes out plenty of utility.

  • For best sustained DPS, start your bursts anywhere from 60-90% heat.

    • Going somewhat lower than 60% is almost as good.

    • Bursts covering less than 10% of your heat meter actually give much lower overall DPS, because a lot of time is spent cooling. (In the extreme, tapfiring single shots is a surprisingly ammo-efficient way to maintain heat.)

      • Start at 80% to get slightly better ammo efficiency while still keeping the same sustain DPS.

  • Squishy HVTs will be thoroughly killed by one burst starting at 80% heat with either build, and common VB targets will be ignited. And are very likely to be slowed by electricity.

  • Two bursts starting at 80% heat do about the same damage as one full magdump from 0%, in almost the exact same time.

  • Breakpoints are similar regardless of T2 ammo/damage choice, except for the 4p spitballer one-mag.

  • Don't overheat unless that last bullet is worth spending more than 3 seconds cooling. And ending up with a cold weapon.

PS: I couldn't figure out where to best put this note, but if you do happen to overheat, you can start shooting again at the beginning of Scout's "slap gun with the other hand" animation - you don't have to wait for the end of the animation.

Python script

The code I used to generate the graphs is provided here. If you want to analyze other builds, or add/tweak/fix anything about the graphs, this will hopefully make it easy to do so.

If you don't have a Python environment set up, you can still run this in an online service such as Google Colab.

The first two non-commented lines allow you to change (1) the build and (2) the amount of heat that the calculation will stop all bursts at. (The latter is so you can account for having skill issue like an actual human, and not firing right until the last possible shot. However, the result seems to be about the same whether you stop at 99% or 93%.)


r/technicaldrg • • Oct 28 '25

Is Marked-For-Death any good of an overclock to take in high hazards (6x2 or 5a)?

Post image
99 Upvotes

Marked-for-death is a strange overclock, since it forces me to completely switch up how I use the M1000, but I've been curious: is it actually a good overclock for higher hazards, comparatively vs the competition?


r/technicaldrg • • Aug 14 '22

breakdown Fight or Fright: A Fear and Stun Comparison (Pt. I)

96 Upvotes

Inflicting pain on enemies is all well and good. But keeping yourself alive becomes much more important on modded difficulties, where even the options with the most killing power can't keep absolutely every enemy off of you. In a dangerous situation, you might have to rely on a status effect you inflict to save your life; the tough decision that follows is which status effects to use. In this post, I'll break down the pros and cons of Stun and Fear, which situations both of them excel and struggle in, and how to make the most of them. But first, it's probably best if I provide a short summary of how both effects work.

Stun

Stun causes most enemies to immediately halt in their tracks. This has multiple uses: forcing a wiggly target to stand still so you can hammer it with some weakpoint shots, giving your team a little extra time to notice a sneaky enemy coming up behind your team, or, arguably the most important and powerful use, cancelling an enemy's attack animation.

When an enemy is Stunned, it will typically play a distinct animation: for example, Praetorians will hunch their forelegs together while hanging their head and swaying it back and forth. For precision weapons such as the M1000, it can be very useful to learn the stun animations of certain enemies, so you know where their weakpoint will be throughout their "stun dance".

Stun can also be a nuisance, however. Most annoyingly, Lead Storm for Gunner's minigun sets base Stun chance to 5% per bullet, and halves the base Stun duration to a half second. A half second Stun doesn't sound too bad, but there are three enemies that are incredibly annoying to proc this tiny Stun on: Praetorians, Menaces, and Wardens.

  • Praetorians have a Stun cooldown period of 2 seconds. This means that after a Stun on a Praetorian has worn off, the Praetorian will be immune to stun for 2 seconds, regardless of the Stun's duration. If LSLS applies its pitiful 0.5 second microstun (which is actually even shorter, as Praetorians have a duration-reducing Stun resistance), there can be frustrating and potentially dangerous repercussions, as the Praetorian is given another chance to spray acid at you and your team, and the seconds where it can't be locked down again can allow it to chunk your team health quite a bit.

  • Menaces will burrow the instant a Stun effect wears off. The only way to keep them from an immediate burrow is Fearing them before the Stun wears off, or Freezing them. If your team has room and time to focus a Stunned Menace, a longer Stun can be very useful against them; but LSLS's tiny microstun just forces them back into hiding, which requires your team stay alert for its next appearance.

  • Wardens aren't nearly as frustrating when accidentally Stunned. They don't have a cooldown period or disappearing act, so they can be Stunlocked to death if you get lucky with LSLS or have a teammate backing you up. However, if you're unlucky enough to roll only a couple Stuns while shooting at them, they may decide to change movement direction, which can interrupt your tracking aim. They also wiggle quite a bit when transitioning between their Stunned and un-Stunned animations, which can cause a lot of wasted ammo and time.

Fear

Fear is, in some aspects, the equal and opposite of Stun. It has many of the same use cases as Stun, but its effects and mechanical usage are altogether different. When an enemy is Feared, it is forced to move roughly 10 meters away from where Fear was applied, and gains a small movespeed bonus to help it do so. However, this 10 meter distance is not changed by effects that affect movespeed: if an enemy is simultaneously slowed by an IFG, a Neurotoxin proc, sticky flames, etc., it will still have to move 10 meters to lose its Fear effect, but it will take much longer to get there, which functionally increases the duration of the Fear. This also stacks with Stun and Freeze.

Fear's main advantage is that enemies will actively move away from you. If a Radioactive Praetorian sneaks into the middle of a Salvage objective and starts killing your entire team with its roar, a quick Fear proc can send it scuttling back out of the ring where it can be dealt with more easily, while simultaneously cancelling its attack.

Of course, Fear has its downsides; two major ones, in fact. The first is that depending on the Fear source, terrain, and plenty of other factors, enemy pathing may or may not be predictable. Sometimes you can have the entire chunk of enemies run screaming back through a choke, where you can deal with them quickly and efficiently; other times, enemies will scramble up, behind and around your team, turning the quick and easy breathing room from Fear into a ticking time-bomb as sneaky Slashers drip down the walls behind your team, preparing to strike.

The second point against Fear is that quite a few enemies have Fear resistance. Unlike Stun resistance where the effect is minimal and only reduces the Stun duration, resistance to Fear affects how likely an enemy is to be Feared. This means that a Fear source with a less than 100% chance to proc is comparatively much less powerful than a Stun source with the same proc chance. Thankfully, there are very few Fear sources with this weakness.

Stun or Fear on the Same Weapon?

There are a number of pieces of equipment that give you the choice between Stun or Fear on the same mod tier. These are:

  • Scout's M1000 (Tier 5)

  • Gunner's Coilgun (Tier 3)

  • Driller's C4 (Tier 4)

  • and technically Driller's Drills, which have both innate Stun and Fear.

Fear and Stun applications depend vastly on how a weapon or tool functions mechanically. As such, I'll cover each of these three mod choices independently of one another.

M1000 Classic: Hitting Where It Hurts vs. Precision Terror

The M1000 is lucky in that its Stun and Fear capabilities both have a 100% chance of proccing, as long as specific conditions are met. This helps it lean into its role as a precision weapon: if you can hit headshots or weakpoint shots semi-reliably, you'll get plenty of mileage out of either of these options. That being said, let's take a look at where each comes out ahead of the other.

Stun is applied on a focused hit anywhere, and only procs on the target(s) it hits directly (includes enemies hit by blowthrough). The Stun lasts for an incredible 3 seconds, which is usually more than enough time to get some additional focus shots off on a now stationary target.

  • Stun is most useful here against singular, bigger enemies: Praets, Menaces, Goo Bombers, Wardens. It allows hitting many consecutive weakpoint shots without having to precisely track a fast-moving target. It also forces enemies out of their attacks, which can even be done at long range; I've kept plenty of Praetorians from taking health off a far-away teammate by hitting them with a quick Stun shot.

  • Stun on the M1000 is pretty pathetic against crowds. Even with blowthrough, there's not much point in Stunning a group of 3 or 4 Grunts at a time, especially since focus shots will have already nuked most or all of their health in the first place. Fear is much more applicable here.

Fear is applied on a focused weakpoint kill, but this more stringent requirement brings with it a boon; Fear procs in a 4 meter radius around the killed target. This means that killing one Grunt at the front of the line will cause the entire pack to head for the hills, along with most other enemies that may have mixed in. As stated before, the duration is dependent on whether or not you have slowdowns applied to enemies; an IFG is a great combo with Fear.

  • Fear is best applied against relatively squishy groups, as you need a kill to proc it. Grunt packs and Mactera clouds are especially weak to Fear, as one proc can end up disorienting at times an entire group. As a bonus, because the proc is applied at the location of the kill and due to how enemy grouping works, a Fear proc from the M1000 will typically send enemies backwards, away from you. This is amplified in a choke.

  • On the M1000, Fear has limited uses against tankier targets. It's very situational whether or not you can proc it, as you will need a squishier target in range of the big guy beforehand. This means that pulling off a Fear against a spitting Praetorian is very hit-or-miss; Stun deals with this situation much more easily.

Stun and Fear both apply to enemies hit by blowthrough, but Fear will have much more use against them, as you can force them back into a choke over and over again with ease, letting you line up blowthrough shots and capitalize on them with ease.

So, to summarize:

  • Stun is great against tanks and larger targets, but has minimal usage against smaller enemies or crowds.

  • Fear is powerful for breathing room against swarms, but struggles with consistently being able to prevent lone tanks from closing in.

ArmsKore Coilgun: Concussive Shockwave vs. Fear Trajectory

The Coilgun is not quite as fortunate as the M1000. Its Stun mod only has a 50% proc chance, whereas its Fear mod applies 250% Fear factor, which means that it's guaranteed to fear everything except a Menace. (Other than un-Fearable enemies.) Already, the Fear mod has a leg up. But let's compare them regardless:

Both effects have a simple application method: they proc when the Coilgun is shot, regardless of its charge level. This means that the most powerful and effective way to use them is to take the partial charge mod on tier 2, which lets you proc either effect in a fraction of a second and gives you a ton of breathing room in a heated situation.

Stun applies a 3 second Stun in a 1.5 meter radius around the central projectile (not the trail). This gives it fairly poor crowd control capabilities when paired with anything except Triple-Tech Chambers, as the radius is so small you will really only end up stunning a few enemies at a time. The only real reason to take Stun over Fear here is for Menaces, which have enough Fear resistance to potentially not be Feared by a shot or two.

The primary argument for taking Stun is that Fear will push enemies out of your damage trail. While this isn't necessarily untrue, this effect can be easily mitigated with simple terrain manipulation. A line of choked enemies will be unable to spread out, which will force them to back up through your trail. Combined with tier 5's Electric Trail, this can mean that enemies will spend a looong time in your trail, which can have devastating effects when using Hellfire. If you don't have a natural choke, you can still make do with some basic kiting, then shooting across a swarm so that the majority of them still end up pathing through it momentarily. With Hellfire, fire spread and the fire DoT will typically burn them down regardless of whether or not they stepped back in the trail. As a crowd control tool, Fear is also superior; its radius is 5 meters, much larger than Stun's. You can partially charge a coilgun shot and shoot directly at your feet, and the surrounding horde will still scramble away from you in terror.

Fear's primary (and really only) weakness is against Mactera: because they move so quickly and are unaffected by slows, they will typically move out of the trail much more quickly than ground enemies, and Fear will usually tend to disperse them, which can actually be annoying for AOE teammates also trying to kill them (TCF, Breach Cutter, etc.). While this affects damage output on tankier Mactera such as Brundles, Spawn will usually still die to Hellfire's fire trail.

To summarize:

  • Stun has limited use as a crowd control tool, and is weakened by its proc chance being less than 100%. It needs Triple-Tech Chambers to give it anywhere near the same radius as Fear. If it had the same proc chance and radius as Fear, it might become a competitive option, especially against Mactera.

  • Fear excels against crowds. Even when it means forcing enemies out of your trail, Fear still carries its weight and more. It's superior as a panic button against everything except Menaces, and helps corral crowds efficiently in both chokes and an open arena, as long as you have a little time to maneuver for it. Mactera clouds are its only plight, and they can typically be easily dealt with through use of a shield and your primary or grenades.

Satchel Charge: Concussive Blast vs. Big Bang

Unlike both the Coilgun and the M1000, Driller's C4 has an additional competitive option on its Fear/Stun mod tier. Rock Mover is a powerful option for any mission type where you may need to quickly set up a defensive position to take a swarm, and is my personal recommendation for modded games. However, this breakdown is assuming that you're using your C4 more for its combat capabilities, so I won't weigh whether or not Stun or Fear are more valuable than terrain carve.

An important note to make is that C4 has a base stun duration of roughly 1.5 seconds (with a seemingly 100% chance). I say "roughly" because this duration is not listed in the game, on the wiki, or on karl.gg. It also has 100% Fear Factor, but this is not particularly valuable as this means that even Grunts have a 50% chance to resist it.

Both the Fear1 and Stun mod have 100% proc chances, which brings them up level in one department. They also have the same effect radius. However, here the application method comes into play. Because you are usually chucking a C4 into the middle of a crowd of bugs, and because the status effects are applied in a radius around the C4, this means that Feared enemies may be forced around and behind you, which can have disastrous results: no longer are the enemies in a nice neat pile that can be easily dealt with, as they are instead running amok behind the front lines of your team. The C4 also has no slowdown effect that can be combined with Fear to mitigate this problem, aside from the short base Stun duration.

1. The wiki states that C4 with Big Bang has 100% Fear Factor, but this is incorrect; base C4 has 100%, while the mod bumps it up to 1000%. Thanks to GreyHound for this info.

The Stun mod, on the other hand, locks down enemies for 5 seconds, which can often let you get a revive or resupply off in relative safety. Here the application method is a boon; hurl a C4 into a dense pack and everything in a massive radius will stand still while you can casually stroll by unharmed. It can also be used as a faux-shield; your team can focus one flank while another is locked down and unmoving, which may turn the tide of battle in your favor.

In summary:

  • Because both mods are applied in the same way and have the same stats and proc chance, Fear doesn't have much of a chance. It can disperse enemies that could have otherwise been easily dealt with while grouped up, and generally doesn't have much benefit. While theoretically it could force enemies back down a choke, Driller is a class that already excels at dealing with enemies in chokes; he doesn't need another crowd control option for that.

  • Stun can give you a lot of breathing room in a tense situation. While you obviously need to be careful so as to not kill teammates, because the radius extends outward (past the visual bubble quite a ways, in fact), you can throw C4 quite far and still Stun the majority of your targets.

Afterword

I was going to write up some comparisons between different weapons, but this post is already way too long, so I've decided to post this as part 1, with part 2 maybe coming soon question mark. As it is, I think this post provides a nice amount of digestible information. I'll have a more rounded-out conclusion in the next post, but for this one I'll just close out by saying that Fear and Stun both have their uses; experiment to see which one works best for you and your playstyle in different situations.


r/technicaldrg • • Apr 24 '23

build BUILD BREAKDOWN (and breakpoints analysis): Electrocuting Focus Shot (Scout's M1000 Classic) [MODDED: 6x2]

89 Upvotes

Intro

Electrocuting Focus Shot, an overclock long forgotten, has recently resurfaced as one of Scout's premier choices for M1000. Raised to a staggering 135 damage over 6s from a pitiful 48 damage over 4s in Season 3, EFS' Electrocution is the second strongest time-based DoT effect in this game, ranking only behind Sludge's Corrosion.

For other M1000 build paths and breakpoints, check out Virryn's post here and here.

Why EFS over ASS?

This is possibly the question that most players will ask when this Overclock is brought up.

Thanks to its complimentary DoT effect that rivals a focus shot in terms of strength, EFS can flexibly act as an ammo-efficient, breakpoint-heavy rifle that effortlessly supplements the team with a debilitating 80% slowdown over 6s against any oncoming targets, all the while still keeping T1 ammo and T4 blowthrough; or a Walmart ASS that specializes more in high-health HVT killing, while retaining all the utility that Electrocution provides, including damage bonuses for selected weapons from teammates like Executioner and Shard Diffractor.

Mod Tree Breakdown

TL;DR:

- 13111 (my recommendation) for general-purpose. 13121 is also good if you can afford to sacrifice some waveclear potential for higher damage against HVTs.

- 2312X for more autonomy against high-health targets, but less ammo; dissolves Electrocution's advantage against smaller targets.

Tier 1

Here we have more damage, and more ammo. Both are viable depending on your goal with EFS.

Damage helps with everything larger than a Trijaw, while Ammo means more shots fired before needing to resupply, allowing you to kill more low-health targets and afflicting more high-health ones with Electrocution DoT and slowdown, apart from enabling you to donate every other resupply to your team.

Take either option. I prefer Expanded Ammo Bags (+40 ammo)

Tier 2

A boring tier, with faster charge speed, better hipfire accuracy, and armor break.

This is a no-brainer. If you need me to explain why, you probably need more playtime with M1000.

Take Hardened Rounds (+220% armor break, from 30% to 250%).

Tier 3

We are presented with more focus shot damage and bigger magsize.

Normally in vanilla, I could see the argument for a magsize upgrade, since there's much less HVT and EFS users would be predominantly shooting trash. However, in 6x2 and above, this is not the case, and base EFS struggles against big HP pool, as it actually loses damage from chaining consecutive focus shots without the focus shot bonus. Picking the 25% bonus recoups damage lost from the OC's penalty and eliminates any worry about TTK efficiency compared to base M1K when focus shotting, which is what you should be doing 90% of the time with EFS.

Take Killer Focus (+25% focus shot damage, from 75% to 100%).

Tier 4

Build-defining options on Tier 4? Yes, providing either blowthrough or weakpoint bonus.

  • Blowthrough sometimes helps with ammo efficiency against lined-up small targets and Praetorians. As EFS acquires slasher bodyshot and mactera spawn bodyshot breakpoints regardless of builds, it can feel quite nice to inflict heavy damage to lots of different enemies at the same time. I have to be honest, I've never been a fan of Blowthrough on any weapon, given its high reliance on terrain/setup and dubious benefits, and M1000 is not an outlier.

  • Weakpoint bonus confers a particularly conspicuous improvement with high DPS focus shot-centric builds. For EFS specifically, with T1 Damage, it deals 312 immediate damage per focus shot against 2x weakpoint. For reference, against the same target, with normal M1000, 2312X deals 390, 1312X deals 330, and 2311X deals 325 damage, respectively. Not a very convincing case at first glance, but when the Electrocution bonus is taken into account, 2312X EFS rivals even the hardest-hitting focus builds in practice, even as TTK takes a slight dip (more in Breakpoints section).

Take either option. I prefer Hollow-Point Bullets (+20% weakpoint bonus).

Tier 5

Some interesting choices here, stun, fear, or conditionally faster reload.

  • Stun constitutes 80% of the reason why EFS holds up so well against traditional focus builds. Since EFS' focus shot itself is drastically weakened, even small HVTs will survive an direct focus shot attempt and continue to live for at least 1-2s. Stun completely nullifies this issue and ensures they do not get any chance to attack you or your team. Against tanks, that is a 3s of immobilization per focus shot, followed by a 3s of 80% slow.

  • Fear is less generically useful, but more impactful in high-stakes scenarios. Clutch reviving and dispersing mactera clouds is only possible with Fear or Cryo nade for Scout. I recommend Fear only with the Damage + WP bonus combo, as it guarantees that you won't have any issue with TTK against small HVTs without Stun (more in Breakpoints section).

  • Reload speed is useless! Wow, who would have thought you could reload cancel to negate the upgrade's entire value. Seriously, don't take reload speed on any weapons, you're better off practicing reload cancelling.

Take either Hitting Where It Hurts (+guaranteed Stun on Focus Shot), or Precision Terror (+guaranteed Fear in a 4m radius on Focus Shot Weakpoint kill), depending on your build and playstyle.

Secondary and Grenades

EFS does not require any specific secondary combination to shine, therefore any selections that are congruent with M1000 are all possible candidates. That includes most Boomstick builds with White Phosphorus Shell and Cryo Bolts. Boltshark's Trifork Volley and Zhukov's Custom Casings with Conductive Bullets might emerge as a pick in vanilla hazards, thanks to their tier 5 upgrades' synergy with Electrocution, though its performance against many HVTs and tanks with regards to TTK is not sufficient to compete as an option in modded.

As for grenades, IFG and Cryo Grenade are both strong contenders for the slot. IFG greatly strengthens a choke and helps take down tanks, while Cryo offers amazing utility, a delete button against mactera, and temporary breathing room for a resupply or revive.

My personal pick is 21213 Special Powder + Cryo Grenade.

Breakpoints vs Small HVTs

TL;DR:

- All EFS builds gain 3 extra breakpoints compared to its traditional counterparts with similar upgrades: Slasher Focus Body, Mactera Spawn Focus Body and Septic Spreader Focus WP. The difference lies in whether some targets have a chance to attack after getting stunned, provided you take T5A. 13111 grants the best targets-killed-per-ammo ratio with little compromise made in regards to safety, while 2312X EFS is functionally identical to traditional focus shot builds, with the best possible TTK.

- In addition, 231XX gains Youngling Body breakpoint on any difficulties below Hazard 6 - 4-player scaling (including Hazard 5 - 4-player scaling).

BuildSlasher Focus BodyAcid Focus BodyGuard Focus WPMactera Spawn Focus BodyTrijaw Focus WP2x Brundle WP (Belly Armor)Septic Spreader Focus WPH6-3p Youngling Focus Body
1311XX*X*X**X*X*XX**
1312XX*X*X*X*X*XX*
1321XX**X*X**X**X*X*X**
2311XX*X*X*X*X*XX*X**
2312XX*X*X*X*XXX*X**
2321XX*X*X**X*X*XX**

- X: target instantly dies from focus shot, no Electrocution tick required.

- X*: target dies from Electrocution as they are stunned, has no chance to attack.

- X**: target dies from Electrocution after stun wears off, has a chance to attack.

Breakpoints vs Big HVTs (on Hazard 6x2 - 4-player scaling)

TL;DR:

- Most EFS builds require extra time spent on waiting for the DoT to tick to make up for the loss of direct focus shot damage. Even then, in most cases they are inferior to traditional M1000 against these types of enemies.

- 2312X offers the best result with the least deviations from normal M1000 breakpoints.

------

Assuming all focus shots are fired at the targets' weakpoints successively without delay, with no Electrocution DoT optimization unless specified otherwise. Primary number means number of focus shots, additional number means hipfire shots; e.g 2+1 means 2 focus shots, 1 hipfire shot.

Enemy1311X2311X2312XNotes
Praetorian9*/10 (6 if optimized)8*/8+1 (5* if optimized)7*/7+1 (5 if optimized)one of the few targets you can fully optimize Electrocution DoT against.
Stingtail2*/2+12*/2+12(1* if hitting mouth weakpoint on first shot)first focus shot is typically used to break armor; doesn't benefit from weakpoint bonus. relying on DoT on 13111 will leave you open to a grab
Spitballer6/5*+154*/4+1
Menace54*/4+14inconsistent if relying on DoT due to burrow, first 2 builds can't 1-mag with Stun
Goo Bomber75*/64*+1last build can kill in one mag if a shot is a hipfire bodyshot
Patrol Bot4*/543*/3+1immune to slowdown
Shellback Body (rolling)7+16+16+1not practical to aim for weakpoint while it's rolling, immune to Electrocution
Warden43+13
Breeder8/7* + 17/6*+16/5*+1

- [number]*: target dies from Electrocution of the last focus shot.

Playstyle and Tips

EFS, at the end of the day, is still a M1000 Focus build, and most, if not all advice from Virryn's breakdown can be applied here. I will add a couple more so this section doesn't look too short :)

  • If your team has a VB Gunner and you are bringing Boomstick, it's usually best to ignite high-health HVTs before starting to unload with M1000. This is even more true with EFS, as you will have lower DPS than most traditional M1000 builds, regardless of which upgrades you take.

  • Sniping Praetorians from afar can be an easy way to soften them up before they get close to the team. A single focus shot can deal close to 300 damage when all DoT ticks are applied.

  • Pepper Bulks with focus shots every few seconds to keep them at bay. EFS' 80% slowdown fully applies on Bulks, making it an invaluable tool to help keep your hold intact.

EDIT: Added Septic Spreader and Stingtail breakpoint.

EDIT (20/11/2023): Added Youngling breakpoint and adjusted Stingtail breakpoint post-nerf.


r/technicaldrg • • Oct 02 '22

guide Advanced Positioning Guide - Part 1 (Introduction and terms)

77 Upvotes

Advanced Positioning Guide

Good positioning is one of the most important things to learn when making the jump from hazard 5 to modded hazards. Each hazard level restricts the battlefield more, requiring better positioning and teamwork to navigate safely. Hazard 4 bugs are too slow to pose much of a threat, no specific movement is required to beat them, regardless of how many are spawned. Hazard 5 is where the bugs begin posing a threat. You need to manage space, and keep track mentally of where the bugs are and where they are spawning. Hazard 6 is where things start getting interesting, bugs are fast and hit hard. Making a mistake can mean a slasher gets 1 hit in, which can mean death. Scaling up the number of enemies in hazard 6+ means it gets very difficult to manage the space you can navigate safely. Bugs are pouring in from all sides, spitters can hit you from odd angles at a distance doing huge chunks of damage, trijaws demand attention or to duck behind cover or your run is over. Slashers can come at you from behind or the ceiling hitting you with a chunk of damage and a deadly slow. In order to navigate all of this safely I will define some basic core concepts for discussing movement.

Core concepts

In order to discuss some of these topics and similar ideas clearly I will define some terms for the concepts.

Zone

This is the area in which you are attempting to exert control over. Ideally all the bugs in it are dead, or you have a plan for how to kill them very quickly. Bugs outside this area are ignored and should pose no threat. Bugs inside of it are considered threats. This is a new concept for higher hazards that most people do not consider in haz 5 except for on Salvage where you need to prepare a zone and hold it.

As an example, if you are in a straight, level, hallway. Your zone reaches all of the way down the hall in both directions until the corners. Spitters as far as the corner can pose a threat to you, so you need to have a plan to deal with them. Melee bugs in the hallway are threats that need to be dealt with. Things beyond the corner you do not need to consider much as they are outside your ability to effect. Depending on your class, loadout, and biome this can either be a good or a bad zone to try and control.

Attention Economy

In the lower hazards there are not enough bugs to make you split your attention. In higher hazards, or even hazard 5 with a high spawn count and enemy cap begins to make you spend your attention like a resource. You need to ration it out and make sure you are looking for and dealing with threats in the right order as they enter your zone of control.

As the number of bugs increase, it becomes necessary to think about your build in terms of how it lets you spend your attention. Are all of your weapons demanding too much attention? Even if the build is good on paper, if each portion of the build requires more attention than it gives you, then it is probably a bad build for modded difficulty.

Typically you want a loadout that lets you flow from one task to the next fluidly, letting you cycle your attention cleanly between enemy types right as it becomes necessary to deal with them. This flow can be considered either solo, or in the context of a team composition.

A great example of this is volatile bullets on gunner. In solo you need your own ignition source, and to spend attention and time igniting a target, swapping to volatile bullets firing, and swapping back. During all of this time your attention is not on dealing with trash mobs, swarmers, acid spitters, etc. On a well designed fire team gunner doesn't need to ignite everything by himself. You can wait for teammates to call out ignited targets for you to execute, or you can call out targets you want ignited while you go about your business doing whatever you want. Trash mobs are generally the driller's problem, and igniting distant targets is generally the job of scout with boomstick, which they can typically do while hopping around doing the objective or collecting nitra.

Space

Space is obviously a chunk of the movable area. Specifically space refers to an area that you can move around in safely. If you are out of space, you are surrounded on all sides, or pinned in a corner. Weapons can be thought about in terms of how they let you shape space. Most mechanics in this game allow the player to take or hold space. A few examples below.

Engie Breach cutter lets you take space from the bugs by instantly killing all trash mobs, leaving a plasma trail, and stunning bigger bugs. It cuts a swath through a swarm and leaves a trail of swarmer killing plasma behind letting you run behind the laser. It doesn't let you hold space though as bugs can immediately refill the space you cleared, and come from many angles that the breach shot does not cover. Firing multiple shots a few second apart can let engie take a lot of space linearly in front of him. If your goal is to get from point a to point b in a straight line breach cutter will let you take space to do that.

Driller sticky fuel lets you hold space. If a zone is already clear of bugs, driller can keep the space for the team by layering sticky flames around the edges of the zone. Anything trying to enter will be significantly slowed and damaged, letting the team deal with them while spending less attention on their own survival and space management. Sticky fuel does not let the driller take space to begin with though.

Shield is a very flexible tool. It can be used to hold space for a set period of time, which is pretty the only thing it is used for in lower skill circles. More interestingly it is an extremely powerful tool for taking space. A shield is one of the strongest ways to breach into an unknown hostile zone. The biggest example of this is when doretta breaches into a new cave while a swarm is hot on your heels. It is almost a given that a good gunner should throw a shield forward through the gap into the next room to take and hold space at the same time. This gives the team the chance to stabilize by getting their bearings and taking out stationary threats.

Mobility

Mobility is, your ability to move within your space, or get to another zone nearby. The general combat loop of the game can be simplified as: once you run out of space in your current zone, you need to be able to expend mobility get to another zone which has space. All the while killing bugs.

This definition of mobility does not include general cave navigation. Mobility is specifically your ability to move in combat. Important note, with this definition the shield is considered a mobility tool, whereas the platform is not, or at the very least is a very bad mobility tool.

A very important aspect of mobility is your potential mobility at any given moment. It is important to mentally track your potential mobility as it should inform your decision making from moment to moment in a fight.

Holding onto a dash increases your potentially mobility, in the same way that standing on the top of a hill does. In haz 6 and up the bugs can catch you if you just run. You need to make sure your potential mobility at any moment is greater than the bugs. Loss of mobility and space is what leads to a wipe, so you want to make sure you hang onto one at all times.

Cooldowns and time

The last axis to consider survive-ability in, is time. A mobility tool will go on cooldown, and you have some number of seconds to clear or hold space until that mobility tool is back up again. Once it is up you can move to another zone with more space. Much of surviving is about managing the tradeoff between using your cooldowns to gain mobility or space. Cooldowns can also be considered reload animations as well.

When expending potential mobility, it is important to keep tabs on your remaining options. In general try to use mobility tools not only to just get to a safer zone with more space, but to try and generate more potential mobility.

For an extreme example, a gunner standing on top of a hill, holding dash and shield, with an almost overheated aggressive venting minigun has extremely high potential mobility. He should choose to use those mobility options in such a way as to generate the most potential mobility in the near future. In my mind the optimal way to do this is to start by jumping down the hill while continuing to keep the minigun hot. Next use aggressive venting to continue moving through the swarm, try to find another hill to dash up as soon as the fear begins to wear off. Using shield next allows you to spend time safely in the shield letting dash cooldown, and the minigun heat back up. Ideally if you managed to find another hill once the shield wears off you should be on top of another hill with the minigun ready to vent again and dash nearing the end of its cooldown period.

Using these same tools out of order can lead gunner to corner himself with no space and no mobility tools ready leading to a down.

The unknown

The unknown is an unexplored portion of the cave. Typically you never want to enter it during combat except in an emergency where you will wipe for sure if you do not. Dying there turns you from an asset into a liability for your team, as they now have to push into an unknown cave under 4 player difficulty to fetch you. During a fight if you consider unexplored territory as simply off limits, your survival rate will go up drastically. Exceptions made for scout with iron will available.

The basics

With all of the definitions and concepts out of the way let's start with the basics in a general mining mission on the modded difficulty 6x2. Most of the guide I will be talking about movement in the context of solo play, since that is the way to show the strengths of each class in as extreme a situation as possible. Team play allows you to offload parts of your survival strategy onto your teammates (as long as you trust them).

Surviving swarms

Announced swarms are the most difficult event to survive in the game. Bugs will continuously spawn and attack for a timed duration. In modded difficulty the swarm announcement timer is shortened making the breaks between swarms very short. The first announcement in a mining mission will come at around the 2:30 mark. From the announcement you have 20 seconds before bugs begin spawning. Dash is on a 25 second cooldown, if you are far from a defensible zone use dash to try and get there quicker, it will be off of cooldown by the time you need it for survival.

Management will state that there are no more incoming enemies ~2 minutes after the swarm announcement. In an ideal world you will be cleaning up the final enemies around the 2 minutes after the initial swarm is announcement. In actual runs this usually is closer to the 2 minute 30 second mark for most builds. It also is difficult for all of the bugs to make it to you quickly which can lead to a long line of stragglers to clean up.

Swarms are timed events, so it is better to think about it as an endurance check. You need to figure out how to keep the bugs away from you for ~2 minutes. And to clean them up fast enough that you don't spend your whole 2 minutes after the swarm cleaning stragglers.

Strategy 1 - Complete avoidance

Considering the extreme of this, scout can grapple, dash, magic powder, and generally avoid all glyphids, only killing threats like mactera/spitballers/spitters. The bugs will continue to spawn until the maximum number of enemies is reached (on 6x2 this is 180 enemies/180 swarmers). Only 32 or so enemies can actually be "attackers" that pathfind to the player at once. Any bugs past that limit will just mill around randomly and idle until more attacker slots open up (example showing idling grunts https://youtu.be/bxt4y-0Rdk4?t=613). If you are ignoring the bugs as scout this means you will wind up with caves filled with idling bugs. This is bad for non-scout classes because it means that the bugs are spread out, and as you kill them they will trickle in to attack you in small groups. This makes AoE attacks against them very ineffective, and ruins your ammo economy. On modded difficulty you are also under a strict timer, you never have more than 2 minutes of peace until another wave or swarm is triggered. Usually if this happens and you are not a scout, you will be killed by attrition.

As the scout you can do most objectives while ignoring common spawns. This is used mostly for speed runs, or trying loadouts where it would be impractical to clear swarms.

Some examples:

Strategy 2 - Clear the swarms

The more common strategy is to clear the swarms as quickly as you can. If you can keep the total enemies spawned in the swarm less than the total number of allowed attackers, then everything will be coming toward you. If everything is bunching up you can effectively use AoE attacks to take out the bugs in an ammo efficient way. Once you clear the wave/swarm, you have a very short window to get some mining done before another wave/swarm hits. Typically after a swarm you have 1 minute till the next wave. Then after that you have 2 minutes until the next swarm.

Regardless of how good your movement is, if your weapons aren't strong enough to take out the bugs at a reasonable rate, they will pile up and spill over from one swarm/wave to the next. And you will slowly drown in a sea of bugs. If this isn't your plan, then you are dead.

Here is an example video (https://youtu.be/i9Z94-mR36s) of good movement as gunner. But I am running hot bullets bullet hell with volatile bullets bulldog. There is basically no AoE in this build and I can not kill enemies fast enough and the swarms start running together.

So in order to survive the mission, your goal isn't just to clear the swarm, its to clear the swarm quickly and position yourself near your next objective/the unknown as the swarm is winding down. You want to be able to swap into pushing the objective as soon as possible after it is safe. Every class technically has the ability to do this solo (even engineer). If you have seen any of my videos before you know I win with bullet hell all the time and I can't just give a failure example with bullet hell, so here is one where I do clear a swarm in good time (https://youtu.be/cvR5boLShtU?t=480). I finish off the last few stragglers from the swarm in the new room, and am ready to push forward and use my time as efficiently as possible.

If you watch those two videos back to back they probably look similar. I use the same movement patterns to avoid damage. If you pay attention, the vast majority of the damage I take is from myself, jumping down a cliff or firing bullet hell into something clipping my character model, which does self damage. So movement clearly isn't all there is to surviving in 6x2. The difference is being clever with your build's strengths, and positioning accordingly. I will be covering that in more detail in a separate case study post or video.

Followups

I will be posting follow up articles/case studies to this one to build on this for specific situations and builds. There are too many nuances to all fit in one post.


r/technicaldrg • • May 28 '22

build BUILD BREAKDOWN: Sticky Fuel (Driller's CRSPR) [MODDED: Haz6x2]

76 Upvotes

Since no one else has posted anything here yet, I figured I'd break the ice with one of the most popular and powerful builds in modded difficulties. I'm new to Reddit so forgive any weird formatting issues. In the context of this post, "modded difficulties" mostly means difficulties with enemy count multipliers, such as 5x2, 6x2, 7x1.5, etc.

All numbers in this post were taken directly from the Equipment Terminal in-game.

A Breakdown of Sticky Fuel

Driller as a class is heavily focused on crowd control and trash clear. While he has some options for large burst damage (Ice Spear, Volatile Impact Mixture, Sludge Blast), he shines best when built for quick and easy deletion of large squishy crowds. Nothing in Driller's kit (and quite frankly, almost nothing in the entire game, bar maybe Neurotoxin Payload) does this more safely and efficiently than Sticky Fuel.

TL;DR: 23232 Sticky Fuel is optimal. Combine with TCF EPC and axes.

Why Sticky Fuel?

  • Fuel Stream Diffuser and Compact Feed Valves are both competitive builds for the sticky flames playstyle on Hazard 5. However, the increased enemy speed on Haz6 and Haz7 means that the extra sticky flame damage that Sticky Fuel provides becomes necessary to kill Grunts and their counterparts in as few lines of sticky as possible, before they walk through the sticky and another line becomes necessary. While this doesn't really impact your overall ammo usage, it becomes very apparent during swarm pressure; if you need to apply another line of sticky that's closer to you, that means bugs are gaining ground ever so slightly on you, and Sticky Fuel helps to alleviate this pressure. It's important to note that Grunt, Guard, and Slasher health does not increase in modded difficulties; in fact, Grunts in a 4-player Haz7 lobby have the exact same health as Grunts in a Haz4 solo mission. The extra sticky flame damage also does help to kill tankier enemies more quickly, such as Spitballers, Praetorians, Menaces, etc.

  • The extended sticky flame duration from Sticky Fuel also gives you a lot more attention economy. In a horde shooter such as Deep Rock, your attention is divided between aspects of the game such as trash enemies, special enemies, large enemies, and even at times the objective. The difference between an 8-second line of sticky with Fuel Stream Diffuser versus an 11- or 14-second line with Sticky Fuel may not seem large, but in the heat of the moment, 3 seconds is a long time; gaining 3 seconds of attention to use on moving to the opposite side of a room to place down another line of sticky can be the difference between a safe defensive position and being overrun.

Tier 1:

On the first tier of the CRSPR we have two choices: High Capacity Tanks, an additional 25 ammo in the magazine, or High Pressure Ejector, an additional 5 meters of applicable range. While the obvious choice seems to be increased magazine size to counter the 25 mag reduction that comes with Sticky Fuel, the range increase is actually the optimal choice, for two reasons.

  1. Sticky Fuel is powerful enough that there are almost no situations where you need to quickly expend 50 ammo to keep yourself safe. Sticky Fuel is not worth using as an offensive burst tool; if you have time to place sticky flames safely, you should also have time to reload safely, otherwise, you should be drilling out of that situation or running towards a teammate or Gunner shield. A magazine of 25 is more than enough to place a line or two of sticky on both sides of a defense point.

  2. Range allows you to place sticky flames much further away from yourself (obviously). On modded difficulties, a sticky Driller is required to continually apply sticky to both sides of a defense point (salvage, black boxes, etc.). With the range upgrade, you need to move a lot less to cover the necessary points with sticky, and thus you end up with more time to split your attention elsewhere. (Range also helps in general usage, but its effect is more obvious with a static reference point.)

Take option 2.

Tier 2:

Tier 2 gives us three options. Unfiltered Fuel gives us 4 extra damage on the direct flame only. Triple Filtered Fuel adds 10 heat applied per damage tick, for a total of 20, and Sticky Flame Duration adds 3 more seconds of sticky.

  • Extra direct damage on a sticky-focused build is useless.

  • Extra heat, while slightly useful for igniting targets for a Volatile Bullets Gunner, is still overshadowed by longer sticky flames. However, Triple Filtered Fuel is a good choice when facing Rival enemies.

  • 3 seconds of sticky, combined with Sticky Fuel itself, gives us 11 seconds of sticky per application so far. This is a fairly obvious choice for a sticky-based playstyle.

Take option 2 for Rival Presence missions or Industrial sabotage, option 3 for anything else, or Rival missions where your teammates are also building for fire and can handle bots easily.

Tier 3:

Another three-option row, we're given the choice between Oversized Valves, a 30% increase in flow rate; Sticky Flame Slowdown, which slows enemies that travel through sticky flames; and More Fuel, an extra 75 max ammo. Here, we again have an opportunity to counter one of Sticky Fuel's downsides, this time being the 75 ammo loss. However, slowing enemies that travel through your flames is essential to this build, and the next tier lets us make up for that ammo penalty anyways.

Take option 2.

Tier 4:

Again a triple row, but this one is more interesting than the previous. It Burns! gives us 20% Fear factor on direct damage ticks, Sticky Flame Duration gives us another 3 seconds of sticky, and More Fuel gives us 75 more ammo.

  • I won't get into Fear calculations in this post, but I'm not sure why you would want to take It Burns! even in a direct damage build, let alone a sticky build. The chance seems pretty tiny, it forces the enemy to run away from your damage (as opposed to something like the Thunderhead's Fear, where the Thunderhead is a long range hitscan weapon), and most direct damage CRSPR builds are focused on taking advantage of Heat Radiance, which relies on enemies being close to you. Don't use this mod in a sticky build.

  • 3 more seconds of sticky is a nice bonus, but with Sticky Fuel and Sticky Flame Duration on Tier 2, we're already at 11 seconds of sticky duration. That's more than enough to bounce between two lines of sticky if needed, but some players do prefer to take this mod over the ammo increase.

  • A 75 ammo increase is incredibly valuable. This bumps your max ammo up to 300 (+25 mag), which can take you FAR in a mission. If you play this build well, on Haz5 you'll likely have more than half your sticky left when your pub teammates are chewing through their second resupply.

Take option 2 or 3; 3 has more overall sticky duration, while 2 can give you more immediate attention economy. 2 is also a good option if you want to force yourself to learn to be more efficient in your sticky play.

Tier 5:

This will likely be the most controversial tier. Heat Radiance heats enemies in an area around you while you are firing the CRSPR, while Targets Explode gives you a 50% chance when killing an enemy with direct fire for the target to explode.

This may come as a surprise, but the optimal choice is actually Targets Explode. Why?

  1. Heat Radiance, with a 25 magazine size and a sticky-based playstyle, does almost nothing for you. If you're playing Heat Radiance offensively, you should build for it with something like Compact Feed Valves. If you're playing it defensively, 25 ammo in your mag isn't going to save you. If you're playing Sticky Fuel and are in range of the bugs, you should be drilling away rather than trying to kill things with Heat Radiance.

  2. Targets Explode does not proc on sticky flame kills. HOWEVER, this is not the purpose of Targets Explode. Targets Explode is used almost EXCLUSIVELY on clouds of Naedocytes and the river of Swarmers that erupts when a Brood Nexus is popped. These enemies are admittedly not substantial threats on Haz5. However, on modded difficulties with increased enemy multipliers, these can get out of hand very quickly. A breeder or two left alive in a salvage room for long enough can produce hundreds of jellies, so it helps to have a method to deal with them as Driller. Similarly, Shocker clouds spawning on top of players can be a death sentence if not dealt with immediately, and Targets Explode can wipe out quite a few of them if it manages to proc. Sadly Targets Explode is not very effective against Shredders, as they have a slightly larger health pool.

Take option 2.

Secondary and Grenades:

While the Wave Cooker has some interesting temperature shock synergy with sticky flames, it unfortunately doesn't stand up to Thin Containment Field in terms of versatility. Similarly, the precision the Subata gives doesn't make up for its pitiful damage output. The best secondary choice for Driller is the EPC built for TCF; this allows you to easily handle clouds of Mactera, chunk some damage off of Praetorians and similarly tanky enemies, quickly mine objectives and minerals, and delete large amounts of terrain quickly when required. Persistent Plasma is also quite powerful, and provides an impressive amount of wave clear when applied right.

Neurotoxin and HE grenades are mostly redundant on a class such as Driller. He already has plenty of primary and secondary setups for crowd clearing; therefore, a grenade that gives him some chunky single target damage is invaluable. Axes are the way to go.

Playstyle and Tips:

A Sticky Fuel Driller becomes the cornerstone of their team. You are the primary protection against Grunts and Swarmers, and you provide a quick and constant ignition source for a Volatile Bullets Gunner, who acts as your heavy hitter against larger targets. For the most part, you become the team leader; you make the decisions, and the rest of the team either follows or more than likely gets overwhelmed. Taking Sticky Fuel allows the rest of the team to spec more heavily into special- and tank-clearing roles.

  • Ideal sticky placement is a few distinct lines of sticky flames on a bug path. If you place sticky multiple times on a single line, you're only getting one line worth of sticky damage; they do not stack. You only need two or three lines to deal with most Grunt packs.

  • Putting down a sticky circle around a resupply or downed teammate can allow you to take ammo or revive without being interrupted and damaged by Grunts; however, if a Praetorian or Oppressor is on a teammate, sticky flames are likely not going to cut it.

  • Small puffs of sticky under tanky targets like Praetorians helps to keep them on fire and taking damage. While minimal, you'll end up with less of them walking around with a sliver of health. The slowdown also helps to keep them in place for precision classes to hit them more easily, and prevents them from sneaking up on you and spitting at you quite as easily.

  • While you should try to stay with your team and keep them alive, if a situation becomes unwinnable, don't hesitate to drill away and lay a circle of sticky on the sides of your tunnel. Sticky drilling is one of the safest setups in the game when played right, and you are a lot more valuable alive alone than dead with your teammates.

  • Don't use a direct stream of flame against anything except targets you are trying to kill with Targets Explode. Always make an attempt to lay sticky beneath what you're shooting at instead, then swap to your secondary or use your axes to do the majority of the damage. For Mactera, the damage they take even with their innate weakness to Fire doesn't kill them very quickly, and you're better off TCF-ing or axing them.

  • Even without Barbed Drills, your drills have a high chance to both Fear and Stun enemies. When you're about to hit by a Slasher or a Mactera, try to get in the habit of quickly switching to your drills and going for a stun to get them to stop attacking. This works on Praetorians as well.

  • This loadout shines most when in voice comms with teammates, where you can dictate how you're going to move through the mission, which positions you're going to hold in, etc. Teammates that run away from a sticky Driller will usually not end up surviving for long on modded difficulties.

Why not Sludge?

Besides some enemies in the game having a weakness to Fire and a resistance to Corrosive (because GSG hates the Sludge Pump I guess), sludge doesn't have the ease of placement that sticky flames does. You can place a sticky line immediately if you need to; if you want to put down sludge, you either have to settle for the tiny, dinky little single puddles that you can't place very fast, or you need to spend valuable time charging a shot that won't even stick to ceilings or walls very well. Ignited sludge can produce similar damage and slow to sticky, but requires more setup time and an ignite source, both of which are less than ideal. The unfortunate reality is that sludge is nowhere near as powerful as sticky is on modded difficulties.


r/technicaldrg • • Oct 04 '22

build BUILD BREAKDOWN: Electro Mines (Gunner's BRT) [MODDED: Haz6x2]

75 Upvotes

A breakdown of BRT Electro Mines

Electro mines is a criminally underused gunner secondary option. It provides a lot of crowd control and total damage, while retaining a very powerful on-demand 100% stun. This breakdown goes over my two preferred ways to build electro mines with hazard 6x2 in mind.

Why Electro Mines?

In a world where hellfire coil gun exists, there isn't much point to electro mines. If you're brave and handsome though you can ban hellfire from your repoire which gives you two main AoE options for gunner secondary: magic explosive neurotoxin bullets bulldog, and electro mines for the BRT.

Magic bullets is extremely popular due to its dazzlingly low skill floor, you have to stoup down to reach it even as a dwarf! This comes at the cost of the skill ceiling also being incredibly low. Once you learn where your mouse is located, there isn't much more to learn about magic bullets. However magic bullets is pretty weak on hazard 6x2, it falls off hard against mixed bug compositions and doesn't have any tricks to learn to make it better.

Electro mines on the other hand has a high enough skill floor that people dismiss it as bad immediately without really trying to make it good by adapting. With careful ammo consumption and mine placement it can be an extremely effective option for gunner as "budget sticky fuel". Electro mines also has an extremely high skill ceiling and can be quite rewarding to use effectively.

Suggested builds

Sustain build: 32121 + Electro Mines

Stun build: 33121 + Electro Mines

Tier 1

This tier is an easy choice for electro mines specifically. The damage and spread of the bullets doesn't matter. The goal is to place mines, which Blowthrough rounds helps with in the case you accidentally (or intentionally) hit a bug. Always take blowthrough rounds.

Recommendation: blowthrough rounds

Tier 2

Tier 2 has a couple valid choices that depend on your playstyle. If you are playing the minigun quickfire ejector can give you the opportunity to drop Born Ready and free up a passive perk slot, which can be quite powerful. quickfire ejector also lets you have more sustain when retreating since you can place mines almost nonstop with the very fast reload. Disabled safety is better when things get up in your face and you have your secondary out. The quicker RoF lets you proc more stuns on slashers/guards that are right up in your face. This can help hold your ground while your wait for your primary to come back online (cooling/born ready).

The difference between quickfire ejector and disabled safety is quite subtle and up to personal preference. I would recommend you start with quickfire ejector as it will disallow the mistake of placing too many mines too quickly and running out of ammo. Because of the delay between setting a mine and the effect people tend to underestimate them, and with a high RoF it is very easy to place way more mines than needed. Once you get used to the power of the mines and know how many you need feel free to graduate to disabled safety if you want to try it out for the extra stun.

Recommendation: quickfire ejector / disabled safety

Tier 3

Tier 3 is an easy choice for electro mines. The direct damage is not the point of the build. High capacity magazine doubles the uptime of placing mines, and gives us way more stun opportunities before needing a reload. It also comes with a little extra ammo which always helps when using mines.

Recommendation: high capacity magazine

Tier 4

Another pretty easy choice. Armor breaking and weakpoint damage don't add much to the build. Expanded ammo bags however adds a TON of extra ammo. This gives you plenty of opportunities to make mistakes placing mines since you have so many extra.

Recommendation: expanded ammo bags

Tier 5

The final tier is another easy one. Placing 6 mines at once in a single burst is actually harmful to the build. Very rarely do you want 6 whole mines placed in one flick of the mouse. Overlapping the mines does not do anything since the bugs will only take 1 instance of the DoT electrical effect. Burst stun on the other hand gives you an incredibly powerful on-demand stun with a 100% proc rate which is fantastic for slashers in your face, and stopping goo bombers amongst many other things.

Recommendation: burst stun

Playstyle tips

It takes 1 second from the time you squeeze the trigger until the mine will detonate. Lead your targets appropriately. The electrical effect lasts 6 seconds on a target and the electricity does not stack. This means you want to wait 5 seconds before placing mines under your original target again to re-electrify it.

Learn the speed to flick your wrist when firing the mines to separate them by a good distance. Too slow and you stack mines, which are entirely wasted since the electrical effect does not stack.

In wider areas you can use electro mines to slow down half of the enemies and use your primary to deal with the other half, making use of the space that electro mines gave you. This is good if there are too many enemies for your primary or secondary to deal with alone.

The biggest tip to improve electro mine usage is to spread the mines out properly throughout a swarm. I see a lot of players using them preemptively making a line of mines in front of the swarm as if it is sticky fuel. This doesn't work very well because only the front line of bugs is hit the mines are expended. The bugs behind will simply pass by and bite your face off. Instead try to spread the mines evenly throughout the entire bulk of the swarm. Remember mines do not stack so ideally you want to spread the mines out so that each one has no overlap with the others. Ideally when the mines go off every single bug is electrified. Rely on blowthrough rounds to shoot through the bugs and set mines on the floors/ceiling/walls.

Electro mines are extremely powerful on small chokepoints I find in particular drawing an X and a + with the mines over the choke point very effective. You want to ensure the first and last mine in a burst are placed outside the chokepoint, and the middle one in the burst goes into the chokepoint. That way no matter which way bugs climb out when coming through the chokepoint they will hit a mine. You can then use stun to stop anything that gets by, and start reapplying after about 4-5 seconds. Examples:

You can also hold wider chokepoints using electro mines combined with the higher RoF mod and stun.

They are also powerful anywhere bugs are required to line up. Finding spots on the ceiling or walls that are the shortest path and lining them with mines is a very strong tactic as well:

Conclusion

Electro mines are a rewarding skill-based AoE secondary option for gunner. You will get out of it what you put into it, as long as you ignore the elephant in the room: hellfire. It is tragically underrepresented in vanilla because the skill floor means many players abandon it before discovering its uses.


r/technicaldrg • • Jul 20 '22

breakdown Sludge VS. Flame: A Driller's Dilemma

73 Upvotes

The Corrosive Sludge Pump (CSP) is often touted as being "sticky flames but better". In practice, however, this is untrue. On modded difficulties with increased enemy counts, sludge struggles where sticky thrives, and vice versa. In this post, I'll try to break down the strengths and weaknesses of both weapons, where they're powerful and where they choke, and which ultimately comes out on top. I won't be comparing every single OC and upgrade choice in this post, and will instead focus on a few interesting examples.

All gameplay examples in this post were tested on Hazard 6 or 6x2 with 4 player scaling.

Burst and Sustain: Which is more valuable?

"Burst DPS" and "sustained DPS" are terms that get thrown around a lot in gaming discussions. If you're unfamiliar with the terms, "burst" usually means how much damage you can inflict in a small timeframe or perhaps in a single magazine. "Sustain", on the other hand, is typically how much total damage you can inflict over the course of either an entire mission, or your ammo pool. While this hopefully won't be a hugely numbers-heavy post (as I prefer practical examples over spreadsheet theorycrafting), sustain and burst DPS can both be roughly calculated. For our purposes, I'll make burst quite simple: damage potential per magazine. Sustain, however, can get a lot more complicated, as it can include total ammo, damage per said ammo, reload speed (depending on the weapon), how strong a DoT is and how long it lasts, and plenty of other factors.

So, which is more useful? Well, DRG is a team game, and in a team with 3 other players you can have a lot of wiggle room, as teammates can pick up some of your slack. On Hazard 6 with double enemies (the most popular modded difficulty), the meta that crushes all others is Sticky Fuel. Sticky Fuel is so powerful because, in the right hands, it can essentially nullify all trash enemies on the map, which lets your other 3 teammates spec into burst damage against Praets, Wardens, etc. that Sticky Fuel doesn't deal with quickly enough. However, we've also found success by combining the CSP with Hellfire on the Coilgun, Inferno on the Breach Cutter, and plenty of other options. To answer the original question, burst and sustain are both very valuable and very important, and it's up to you and your team to figure out who is going to take what.

Burst Comparison: Face Melter & Compact Feed Valves VS. Disperser Compound & Volatile Impact Mixture

  • 11111 Face Melter

  • 21111 Compact Feed Valves

  • 12222 Disperser Compound

  • 13222 Volatile Impact Mixture

These builds are not necessarily what I would actually recommend taking on these weapons; I chose them solely based on their ability to get out as much damage as quickly as possible, for the sake of comparison. With that said, let's compare them.

The first test I ran consisted of spawning 30 Grunt Guards in a choke. Choking them allows you to focus your attention in one direction, and make the most out of each shot by hitting the maximum amount of possible targets. I chose Guards because they're fairly tanky enemies, while still being relatively common in large numbers, which makes them useful for testing on both individually and in a group. This is obviously not indicative of a live-fire situation, but I think for our purposes it's adequate.

In this clip, it took me1:

  • roughly 14 seconds2, 105 ammo (out of 360), and 1.5 (1 full, 1 partial) magazines to kill 30 Guards with Face Melter;

  • roughly 16 seconds, 95 ammo (out of 450), and 1.5 magazines to kill 30 Guards with Compact Feed Valves;

  • roughly 12 seconds, 40 ammo (out of 200), and 1 total magazine (with an unnecessary reload) to kill 30 Guards with Disperser Compound;

  • roughly 15 seconds, 40 ammo (out of 200), and 1 total magazine to kill 30 Guards with Volatile Impact Mixture.

1: note that I'm not particularly experienced with either using Heat Radiance or *Volatile Impact Mixture*'s firing rhythm, so I likely wasted ammo and time with some of these options. I also used extra ammo when it was probably not necessary as some enemies would have likely already been dead to a DoT effect.

2: from the first trigger pull to the last enemy death, disregarding some stragglers

So, what does this tell us? The CRSPR is ok at burst damage, but to be any efficient at it, Heat Radiance and fire spread need to be doing a large portion of the work. Taking the Fear mod in tier 4 also means that in a dangerous situation, whether or not you take damage will be largely up to RNG, as you have no guarantee3 that an attacking enemy will be Feared away from you before its attack lands. Theoretically you could give up Fear, but the other two options are either more sticky duration or more ammo, neither of which really give you much value. Unlike sludge, you also have no innate slowdown, which means you will get pushed back quite easily.

3: protip: drill enemies that are attacking you for a free stun and/or fear proc

On the other hand, the CSP is quite adept at chunking down groups of enemies. Even with sub-optimal Volatile Impact Mixture usage, it still shredded the guards with ease. In the tight corridor, the DoT from Disperser Compound hits multiple members of the group and ticks quite nicely on them, while the charge shot and its fragments both do heavy damage. While this example was quite simple and only had one enemy type, sludge can burst down mixed groups of Grunts and Mactera just as well.

Side Note: I tried Sludge Blast as well, but it was pretty pitiful. The shotgun blast doesn't penetrate through bugs, which means that it will chunk two or three guards in the front and nothing else. The slow reload compounded with this issue to really make its TTK feel awful.

So, what happens when we take this into the open? 30 Guards, but in a relatively flat arena this time, where they can't be boxed in and corralled as easily.

In this clip, it took me:

  • roughly 24 seconds, 132 ammo (out of 360), and 2.5 magazines to kill 30 Guards with Face Melter;

  • roughly 10 seconds, 70 ammo (out of 450), and 1 magazine to kill 30 Guards with Compact Feed Valves;

  • roughly 14 seconds, 38 ammo (out of 200), and 1 total magazine to kill 30 guards with Disperser Compound;

  • roughly 28 seconds, 47 ammo (out of 200), and 1.5 magazines to kill 30 guards with Volatile Impact Mixture.

The results this time are a lot more interesting. I'm not sure what happened between Face Melter and Compact Feed Valves; perhaps some fire spread shenanigans, different Fear RNG, or I played too defensively. The CRSPR's Fear mod was quite detrimental this time, as enemies would constantly be splayed all over the fighting area, much more so than when they were choked. Interestingly enough, Disperser Compound held its own, but Volatile Impact Mixture struggled when the Guards were separated; I had assumed the opposite would be true. (again, perhaps I misused VIM, and it may have been more efficient to still use charged shots with it) There is a lot of RNG in an open area test, as Grunt pathing becomes much less predictable.

Burst Conclusion:

CRSPR is a lot more ammo hungry than the CSP when it comes to burst. It also requires you play much closer to the bugs, as Heat Radiance is a large part of your damage output. Terrain can be quite detrimental to a direct damage flame build, as without a choke you will lose out on a lot of fire spread damage and Fear chance. Sludge is much more versatile, as your damage instances are more independent of each other and the TTK on individual enemies is typically much shorter, meaning you can move on from dangerous threats more quickly.

Sustain Comparison: Sticky Fuel & Fuel Stream Diffuser VS. Goo Bomber Special & Disperser Compound

  • 23232 Sticky Fuel

  • 23221 Fuel Stream Diffuser

  • 32X1X Goo Bomber Special

  • 32X1X Disperser Compound

Here's where we have to whip out the calculator. I chose these four builds primarily for their ability to keep bugs at bay while simultaneously inflicting large damage on them, but before we look at that capability in-game I figured I'd do some simple calculations, to see how they stack up on paper.

CRSPR Calculations

Before we can discern the CRSPR's maximum sticky duration per its ammo pool, we need to know how much ammo it actually takes to apply sticky. With the CRSPR, your range is a function of how long you've held down the trigger, which in turn means that it costs more ammo to place sticky at longer ranges.

With Sticky Fuel's build, which uses the tier 1 range upgrade, it takes roughly 1 ammo to place sticky at 6 meters or closer, 2 at around 13 or closer, and 3 to reach its maximum range of around 15.7 meters. For the sake of our calculations, I'll average this out to 2 ammo per sticky placement. This build has 11 seconds of sticky duration and 162.5 theoretical sticky ammo, for a total of 1787.5 seconds (or just under 30 minutes) of sticky time. However, this is a theoretical maximum; not all of your sticky ammo will hit terrain, not all of your sticky ammo will be walked over by a bug, you may use the direct stream to ignite enemies from time to time, and you will likely use more sticky than necessary for most enemies. For the sake of comparisons, I'll cut that number down by 30%, to ~1250 seconds of sticky flame usage. (If you're curious, Sticky Fuel with both duration mods instead of one ammo mod has 1575 total seconds of sticky duration.)

Fuel Stream Diffuser's downside is actually a blessing in disguise. A lower flow rate means that less ammo will be consumed without negatively affecting sticky flames. For this reason, I'll average out the cost of sticky to be 1.5 ammo rather than 2. (These aren't particularly exact numbers, in case you haven't noticed.) With 8 seconds of duration and 233 theoretical ammo, we get 1866 total seconds of sticky. Cutting that down by 30% gives us just over 1300 seconds, which is almost a minute longer than Sticky Fuel. However, Fuel Stream Diffuser's sticky has quite a bit less damage than Sticky Fuel's, which may impact its performance.

Sludge Calculations

The sludge math should be a bit simpler, though there are some interesting things to note.

Firstly, Better Air Pressurizer and Atomizer Nozzle both increase the length that Goo Bomber Special projectiles will travel.

  • Better Air Pressurizer alone will add roughly 7 meters to your total projectile travel length, from roughly 11 meters to 18. However, without Atomizer Nozzle, your fragments will be quite spread out from each other.

  • Atomizer Nozzle alone will only add about 3 meters to your projectile travel length, bumping it up to 14. However, your fragments will be much closer together, and there will be very few gaps.

  • Together, they bump your total length up to roughly 22 meters. However, gaps will reappear in your lines.

From this testing, I decided that taking Atomizer Nozzle and Air Sensitive Compound instead of Better Air Pressurizer would be more valuable with Goo Bomber Special, as the idea is to get as many compact goo clumps as possible. And, in a practical situation, it's not often that you need a line of goo that's 20 meters long.

Second, we need to figure out the difference between Supersaturation and More Goo Canisters. I'll do this for Disperser Compound first, as it on its own doesn't affect puddle durations. To keep this from getting extremely messy, I'll focus only on puddle duration, and avoid the DoTs themselves.

  • With Supersaturation, we have 140 total ammo and a puddle duration of 18. Our charged shots cost 4 ammo each, which means we have 35 shots. We get 630 total seconds of puddle time, and 441 if we account for waste.

  • With More Goo Canisters, we have 180 total ammo, but our puddles only last 12 seconds. This gives us 45 charges, and 540 seconds of full puddle uptime. Waste comes out to 378 seconds.

While the winner may seem obvious, in a practical situation, how often are you going to make full use of an 18 second long puddle?

Let's run the calculations again with Goo Bomber Special:

  • Supersaturation gives us 35 charges again, but this time our puddles last just under a whopping 24 seconds. Without waste is 840 max seconds, with is 588.

  • More Goo Canisters grants us 45 charges, and our puddles are now 16 seconds long. The gap is a little wider now: 720 without waste, 504 with.

Again, a 24 second long puddle sounds impressive, but I can see only a few situations where that long of a duration might end up being useful.

Finally, we need to determine which tier 5 mod will be most useful. To find this out, I used 3221X Disperser Compound and ran the same 30 Guard test in a choke. Then I ran it with Slashers, Grunts, and Trijaws, to hopefully reduce the bias behind the results.

  • Against Guards, Fluoroantimonic Acid performed much better than Protein Disruption Mix. The slow sludge simply did not do enough damage to the Guards to more than mildly inconvenience them, rendering it ineffective.

  • Against Slashers, both options seemed to perform much the same, but damage sludge was on average slightly more efficient.

  • Against Grunts, there was almost no difference.

  • Against Trijaws, the clear winner is Fluoroantimonic Acid, for two reasons. One: slowdown effects do not affect flying enemies, and two: this mod is required to hit the one-shot breakpoint on Trijaws with Disperser Compound. Without this mod, they will have roughly an 8th of their health left after the DoT wears off.

Due to these results, my final testing build for these overclocks was 32212. Let's move on to some video demonstrations.

Since the point of this comparison is to measure how well a build will perform throughout a whole mission, I figured it would be a better test to fight an entire 6x2p4 grunt swarm.

Fighting this swarm with Sticky Fuel cost me just under 200 ammo, with the remaining pool being 125 (out of 325). I took a fair few hits (which is to be expected, 6x2p4 isn't exactly a fair difficulty) but for the most part sticky took care of a large part of the swarm while I ran around trying not to get chewed on. In a real game I would have likely died several times over, or had to panic drill into a wall.

I also fought a swarm with Fuel Stream Diffuser, but since Reddit has a 5-video limit I won't upload that run. The fight was mostly similar, but the lack of extra sticky damage from Sticky Fuel is definitely noticeable. I attempted to use Heat Radiance to my advantage a couple times, but always got bitten in return as I didn't have the Fear mod. I used pretty much all of my ammo and had just under one 50 clip left (out of 350 ammo).

Disperser Compound held its own, for the most part. The problem with sludge is that mechanically, it's very awkward to place compared to sticky flames. Once your sludge puddle has evaporated, it's very difficult and time-consuming to replace it. You also can't stick it to walls or ceilings very effectively, which means it struggles on any terrain that isn't an open field or a tiny choke. Another thing to note is that I was using Plasma Burn, which I would not recommend giving up Thin Containment Field for at all. Sadly, without Plasma Burn or an alternative ignition method, sludge has to choose between either the damage or slow of Sticky Fuel; it can't have both, which is what makes it a much poorer sustain tool. Disperser Compound ended up with 55 ammo left (out of 180).

I immediately noticed (as was my suspicion) that Goo Bomber Special was struggling in the choke. Placing it is very awkward, and you can quite easily lose half the fragments from a charge if you miss. After breaking out into the open it was a lot more effective, but remember: this is a Grunt-only swarm. The situation would be entirely different if there were Mactera, Spitters, Menaces, Praetorians, etc. Sure, if you get a Grunt swarm and you have someone with fire on your team, you'll do fine... but why not just take sticky flames? With Goo Bomber Special, you need to take much more time and have much more space to line up your shots, even if you're not trying to chain an ignition between goo lines like I was. At the end of the swarm, Goo Bomber Special had 53 ammo left (out of 180).

Out of all these options, Sticky Fuel could have easily made do with one resupply, while every other build would have needed two.

Sustain Conclusion

Sludge struggles to sustain in four ways:

  1. Sludge has a very clunky placement mechanism, which forces you to move to open ground to make the most of it. This also means that an Engineer's repellent is much less effective with it, as repellent is most useful on walls placed behind the team so they don't have to watch their backs.

  2. Sludge has to choose between slow or damage. Even with its tier 5 damage mod, sludge struggles without the aid of an ignition source. To ignite your sludge yourself, you need to sacrifice Thin Containment Field, which definitely hurts.

  3. It's very easy to waste ammo with sludge. You accidentally shot a charged shot past where the enemies were spawning? There's 4 or 5 ammo gone. A grunt popped out from a corner and ate your charge? Too bad, your puddles are misplaced now. Sticky doesn't have this problem; if you put a puff down in the wrong spot, who cares? It's less than 1 percent of your ammo.

  4. While puddle duration is longer than sticky duration, it takes much longer to place more puddles than more sticky. You have to charge two or three full shots to completely cover one end of a tunnel, which can take quite a while. Sticky can trace a single circle around a choke and move on.

CRSPR has more ease of placement, better ammo efficiency, a better slow and damage combo, and benefits from fire spread to boot. Not to mention the team synergies: Volatile Bullets, Executioner with Electro-Chemical Rounds, etc.

Ultimate Conclusion

Sludge can be very effective at deleting large chunks of enemies quickly. But it lacks the over-time stopping power of sticky flames, which means it can't hold a position nearly as effectively. Likewise, a direct damage CRSPR build doesn't do much on its own, and needs Heat Radiance and fire spread to hold itself up. Sticky does enough damage by itself that building for direct burst is pretty pointless.

Sticky is incredible at efficiently clearing Grunts and Swarmers, can deal decent damage against chunky targets such as Praets and Wardens, and can be a quick ignition source for the team to utilize. Sludge can chunk a group of mixed Grunts, Guards, and Slashers quickly and conveniently, can melt off armor and deal heavy damage to Praets and Shellbacks, and can shred through Mactera clouds.

Is the Corrosive Sludge Pump "sticky flames but better"? No. They're different weapons with unique identities. They both have strengths and weaknesses that the user must overcome with different parts of their build and their team. If they're to be played to their full effect, they need to be played radically differently; they have different tactics, different movesets, and different positioning mindsets. One cannot imitate the other.


r/technicaldrg • • Oct 16 '22

data Cryo Bolts Breakpoints (and an interesting bug)

67 Upvotes

Cryo bolts are an increasingly popular choice for scout secondary, particularly for mission types like refinery/PE/some eggs where the scout really needs to go out on their own and clear stationaries without the help of a VB gunner. As such, most people probably know these breakpoints.

StationaryNumber of cryo bolts needed to freeze
Breeder2
Spitballer1
Brood Nexus1

But after that initial phase of the mission, it can be easy to let cryo ammo go unused. You can freeze groups of enemies (best if combined with pheromone grenades to group them) but it's pretty clunky especially with a fire-heavy team, and scout isn't usually particularly well equipped to capitalize on frozen grunts. However, there are many cases in which cryo bolts can be useful, even if it's just when you're out or nearly out of primary ammo, so it's worth looking at the breakpoints for some more common enemies. I hadn't seen anyone collect them into once place so I thought I would do so.

MacteraNumber of cryo bolts needed to freeze
mactera spawn1 (also dies to a direct weakpoint shot)
mactera brundle3
mactera trijaw1
mactera grabber2
mactera goo bomber6

I knew that goo bombers felt awful to try to freeze, but I didn't know they were this bad; it's essentially never worth trying to freeze them. Grabbers, though, only take 2 cryo bolts which surprised me. Given that they take at least 2 m1k focus shots, more if you miss the weakpoint which is very easy to do, using cryo bolts to take them out is honestly quite efficient. However, it works best if you can anticipate the grabber and hit it early so your hot bullets gunner doesn't take any shots at it. Trijaws and spawn are pretty reasonable targets as well if you want to conserve m1k ammo and aren't under a ton of pressure.

Against dense groups of spawn it is actually possible to take advantage of the AOE freeze, though amusingly enough it relies on you hitting them in the face instead of the weakpoint so they don't just die immediately. It's not the safest way to deal with massed mactera spawn, but it is an option that you should keep in mind.

GlyphidsNumber of cryo bolts needed to freeze
all grunt variants1
glyphid praetorian2
glyphid oppressor6
glyphid warden1
glyphid menace1 (generally best not to hit directly)

Oppressors are again just not worth it. Wardens only take 1, which is funny because I'm pretty sure I'd just been assuming 2 like praetorians and shooting it twice every time. In any case both praetorians and wardens are a good choice if you're not under pressure and if you're not interfering with your VB gunner. Cryo bolts also just 1 shot web spitters, if you really have a lot of ammo to waste. With menaces the inherent stun on the bolt causes them to burrow immediately, so you end up freezing in the last few frames of their burrow and the menace ends up frozen in the wall much of the time. Instead you can shoot a bolt right next to it which will freeze it normally. Of course there is utility in simply stopping the menace from being a threat immediately, and it has to wait the full unfreeze time before popping up again so you delay the problem significantly with a direct hit, so there are situations where either are reasonable.

DisruptiveNumber of cryo bolts needed to freeze
shellback2 (does not stop moving)
shark1 (does not stop moving)

For both of these it's hard not to fight over temperature with your hot bullets gunner. The shellback one I doubt will ever be of much use, since they're difficult to hit with a projectile weapon anyway and you don't really save that many focus shots over just shooting it immediately. The shark I possibly could see being useful, I wouldn't have guessed it would only take 1, but it is still going to be difficult to get that hit a lot of the time.

Big BoisNumber of cryo bolts needed to freeze
bulk7-9*
all dreads7-9*
glyphid sentinel2

EDIT: I'll leave the info below for posterity, but the bug is fixed now. It's actually very easy to get double freezes off.

Now this one is interesting. I say can be done with 7 because I was able to do it during testing a handful of times, but very inconsistently. The reason for this is a bug where if an enemy is subject to multiple instances of the same status effect (in this case, the freezing from the bolt) and the first instance ends, it will end all instances of the status effect even if they had a bunch of duration left. And then if nothing chills the bulk in the next 1 second window, the bulk's warming rate kicks in and it resets to 0 degrees. Thanks to MeatShield for figuring this out.

What we can do is do some freezing and then when the effects all end, shoot another bolt so we start freezing again saving our earlier progress. It just happens that spamming at max fire rate would have the effects end right after a bolt hit, so the 1.2 second reload time was enough to prevent the next bolt from hitting during the 1 second window. All you need to do to fix it is pause slightly between one of your first 3 or 4 bolts, which gets you out of that bad timing window. This pause does mean you cool a bit more slowly so you need to shoot an extra bolt to get it to freeze, 2 if you want to be really safe depending on how long your pause was. But 8 or 9 bolts is actually not that many, compared to the "basically impossible" that I was expecting to conclude here, especially considering that otherwise you're almost always resupplying with full cryo ammo when fighting dreads.

Of course, the elephant in the room is that teams are very often all fire, or at least have some fire that will interfere with your ability to freeze the dread. And your ability to time the freeze to be during their vulnerable phase is even worse than cryo drillers, because it takes about 10 seconds to go from starting the process to having the dread frozen. These are semi-solvable- you can coordinate to freeze 1 twin while the team's heat weapons focus the other. For missions where you pop the dread to block spawns and then ignore it for a while, you could kill it in small bursts over time each time you freeze it, since teammates with heat have something else to do while you freeze. But even then, a standard team isn't super well set up to capitalize when it's frozen, since we usually have little burst damage outside of breach, which doesn't work, and axes which are pretty limited. In that context, it may not be worth the time necessary for scout to freeze.

Of course all of this is entirely speculative on my part because I only just figured out how to actually freeze them consistently, but I'm interested to see if it could actually be useful. And of course a way to freeze bulks will have some applications even if it's normally completely unnecessary.

Conclusion

Cryo bolts are better against non-stationaries than I thought. The grabber breakpoint in particular is one that I'm definitely going to use more often whenever I don't feel I can hit the weakpoint. It's nice having an option in your back pocket for AOE killing mactera spawn, even if it's super scuffed. And once you understand how to play around the bug, freezing dreads and bulks is completely doable, though the value of that can be very variable.


r/technicaldrg • • Jul 09 '22

guide ShotgunCrocodile's Basic Movement Guide

67 Upvotes

Basic movement

This guide will cover what I think are some of the general basics of good movement in DRG. I will have multiple follow up posts for class specific movement options, and positioning for fighting swarms. Below is the most general advice that applies to all classes and situations.

Good movement is one of the most important things to learn when making the jump from hazard 5 to modded hazards. Each hazard level restricts the battlefield more, requiring better movement, positioning and teamwork to navigate safely. This guide will focus on how to move in a way to avoid damage.

The basics

Never stop jumping

The simplest piece of advice is to never stop jumping. This is probably the single most important movement change that will up your survival in a swarm. Jumping lifts you up high enough that grunts will often miss, since their attack does not have much range. Jumping up and down hills drastically increases your speed, letting you put more distance between you and encroaching enemies. The biggest mistake I see newer players make to modded difficulties is to jump only when they think they need to. Never stop jumping. Let's look at some examples.

Take a look at this vanilla hazard 5 clip. To avoid damage, all you have to do is hold down a direction key and jump. Even if you are moving backwards and jumping, which is as slow as you can go, you still avoid a slasher's attack. At no point during this swarm am I in any real danger as long as I keep jumping and running in a circle. https://youtube.com/clip/UgkxMktLxO7Y_AsYIvZ6iyBzDIiBgSlQ306u

More detailed look at avoiding a grunt's attack on haz 5. https://youtu.be/We7tqrvTJ_g

Ice storm clip

Next lets look at a clip of ice storm with cold radiance. This build requires that we be up close to the enemies. It does incredible damage, which comes at the cost of needing to be very evasive. A single web or acid spitter that gets a lucky shot off before you freeze it can end your run. https://youtu.be/pvpE3-IcUIg

If you listen carefully during this clip you will hear many instances of mactera and spitter projectile impacts near me. In a lot of these cases I am not even aware of the threat because it is behind me. Since I am constantly hopping left and right ranged enemies will miss most of the time. In order to dodge projectiles jump left and right with with respect to where enemies will come from. This ensures that even if there is a new threat you haven't seen, you have a good chance of dodging its attack.

Bad jumping

https://youtu.be/t7SJwb58Kn8?t=557

Here a clip where I am jumping to avoid damage from grunts, but I jump toward the corner, which gets me nailed by an acid spitter I didn't see. If I had been jumping left and right at the same time (perpendicular to where the threats are coming from) it would have missed me here. Don't jump toward where ranged enemies will appear.

Mini gun bunny hopping

https://youtu.be/kK5FQP9VmhE

Another example using constant jumping adapted to the minigun. Jumping backwards away from the swarm and only firing when in the air to avoid the minigun slowdown. Moving uphill or downhill using this technique will allow you to still outspeed grunts. Mix in some side to side movement, and getting in a good position to use Aggressive Venting to hit the maximum number of enemies. My first big mistake here is I stop moving to aim when I take out my secondary and wait for the minigun to cool. I stop my constant movement and become an instant easy target for younglings I didn't know about. If I had still been jumping, and mixing in left and right movement like I should have, they likely would have rolled right past.

Jumping flicking to avoiding mactera

https://youtu.be/3fn45xc1aR4

Mactera spawn and brundles are fairly easy to dodge as long as you are jumping side to side. Sometimes if you are too close to the mactera, or one you just noticed is already mid-charge, jumping to the side won't be fast enough. To jump faster, flick to the direction you are going to jump right as your feet hit the ground. You move faster when you are going in the same direction you are facing. Once you jump, flick back to face the mactera and continue firing your weapon.

Jumping to avoid trijaws

https://youtu.be/3fn45xc1aR4?t=6

This is the same clip from before, focusing on the trijaw now. I use the same trick of flicking right to jump quickly behind the cover of the wall to dodge the projectiles. Next I jump toward the trijaw which means I am committed. I was watching to see if I got a stun proc, but I didn't which means I had to time a jump for when it fired at me. Because the shots arc, if it fires at you while you are in the air, they will usually miss since the shots arc over your head as you fall. This let me slip below the projectile and finish the mactera while continuing to kite away from the grunts chasing me. The rest of the clip is just jumping to avoid the goo bomber shots without having to look at the goo bomber. This lets me spend my focus killing the grunts.

Jumping/Kiting with LSLS (Lead storm gun with the lead storm overclock)

https://youtu.be/EHEJCju2ORw?t=147

Lets look at an example of kiting a swarm with LSLS in perfect terrain, with the perfect spawn pool. The situation is so perfect for this build that it makes the 6x2 swarm look easy. The first half of the clip doesn't require much jumping or movement. LSLS + Hot Bullets fired down a hallway will destroy most everything with pure damage and fire. I only get forced back due to oppressor and bulk. So lets look at kiting the bulk. Bunny hopping backwards up a hill will outspeed the bulk. I can fire in the air with LSLS and not suffer from the stop moving effect. Even without the electric effect of the coilgun I am able to outrun the bulk comfortably.

I would be doing everyone a disservice if I didn't link this 6x2 true solo run with LSLS: https://youtu.be/1bquNlxmqaY. Filled with good movement examples.

Maintaining momentum

When kiting a swarm it is important to keep your momentum up. Anything that slows you down for a moment, may be the moment that a slasher gets a slowing hit in, or the moment a goo bomber manages to get you mired in a puddle of goo. Try to keep your eye out for terrain deformations, and plot your course so you land squarely on the top of it, or clear of it entirely. If you happen to hit the side just right you may cancel your momentum, or worse suddenly start the mantling animation cancelling both your momentum and whatever action you were trying to do. Depending on the biome it may be important to actively watch the ground and plot your course through, keeping track of where you feet are going to touch. For example, snow will slow you down and cancel all of your momentum if you touch it. https://youtu.be/Y_tkJPylJJM?t=351

Gaining momentum back once you lose it can be difficult. If you bump terrain and slow down, enemies are now closer, which means to gain space back you need to focus more on movement and less on killing the enemies. This tends to snowball out of control as more enemies pile up since you can't focus on killing. When this happens use your kit (shield, dash, breach cutter, grapple) to get breathing room back so you can split your focus between killing bugs and kiting. If you are lucky you can use a slope to regain momentum by quickly jumping uphill, or jumping off of a small cliff to use gravity to get ahead of the bugs.

Conclusion

Always be jumping. There are very few situations in which you should hold still. Moving is better than standing. Randomly jumping is better than moving. Jumping perpendicular to incoming threats is better than randomly jumping. Jumping to avoid a specific incoming threat is better than jumping perpendicular to incoming threats.

Ledge grabbing

Lets look at the usefulness of ledge grabbing, beyond just letting you climb up.

Ledge grabbing prevents fall damage, this is a somewhat inconsistent way of getting down a long distance. In an emergency look down and try and line up with an edge. If you can press W at the right moment you can save yourself. Extreme example - https://youtu.be/VSo2EWdFJac?t=2049

There isn't much to say about this one other than practice it often. When things are calm and you are on a team you might as well practice jumping down and ledge grabbing to prevent fall damage. Other dwarves can revive you if you mess it up. Once you can consistently ledge grab, it can be mixed into your other movement's so save yourself some fall damage. https://youtu.be/ocuH9l3tgcs

Ledge grabbing can also be used to climb into small nooks in the wall. This is especially useful for scout when mining without an engineer platform. In order to ledge grab, the space in the wall needs to have enough head-room for the dwarf. This amounts to 2 in game terrain chunks. Here is a short video showing mining out 1 slot of terrain is not enough room, even if the scout can fit in the nook using the grapple, it won't trigger a ledge grab. You need to clear out adequate headroom first. https://youtu.be/sfpDQcuet7w

Scout can also utilize a single normal pickaxe strike followed by a power attack to carve out a slot on a nitra vein in one grapple. Power attacks come out instantly and cancel the previous animation, they also destroy any biome terrain in 1 hit.If you time your first pickaxe strike to hit nitra/morkite at the apex of your jump, you can follow it immediately with a power attack to carve a second chunk creating enough room to stand, and even enough space to ledge grab. https://youtu.be/NGaGz2Yb6R4

This trick can be used for non-scouts as well to climb up a nitra vein to reach the top more easily. This can be helpful in a lot of cases where nitra is reachable from the ground, but the top portion is just out of reach. Engie/driller have a lot of mobility ammo so its not as useful for them, but for gunner it's a lot wiser to climb the nitra by ledge grabbing then waste a whole zipline. https://youtu.be/RbwCvGUHIKU

Ledge grabbing is not all fun and games though. It has a dark side as well. Since you whip out your hands to ledge grab, it will animation cancel the previous action. This means if you are bunny hopping around and firing the LSLS minigun and you happen to hit some small terrain just wrong you will ledge grab it even if its at shin height, putting away the minigun to flail your arms around.

Abusing enemy pathing

Ground enemies will always attempt to take the shortest path to their target. There are a number of ways to abuse this pathing, and a few objects the player can stand on that the bugs cannot. Lets start with objects ground bugs cannot path over.

Refinery

The top of the refinery is probably one of the safest places a player can stand still. This is easy to reach with a zipline or as scout. A couple example clips below of scout making the bugs all kill each other while standing safely on the refinery. This is not a particularly interesting way to play, but it can be a great spot to know about if you need a second to catch your breath. https://youtu.be/GKBenK8q-0c https://youtu.be/No3wWZdWu6c

Brood Nexus

The brood nexus has a lot of boons it grants the player. First, standing on top of a brood nexus is safe from ground bugs since they cannot walk on it. Mactera do not consider it terrain and will not move around it when aiming at a player, which makes it great for body blocking mactera projectiles. Finally, it is very easy to ignite and burns for awhile, making it a great heat source when bugs are pathing near it.

Given the low threat level of a nexus, and the number of ways the player can exploit it, it is often a coinflip as to whether or not they are worth clearing. At the very least, don't blindly clear them. Look at their positioning when entering a new room and decide if you want to try and get some use out of it before killing it. https://youtu.be/2s4vhKIuRNQ

Exploding plants

If an exploding plant is large enough, melee bugs cannot reach the player standing on top. Praetorians will also be unable to initiate their acid spray ability. Another reason not to pop them right away. https://youtu.be/8BYtSkmmSlk

Exploders do not get close enough to trigger. They do however all path to the same point lining their heads up perfectly for nice juicy m1000 shots blow through shots. https://youtu.be/p1se9kHMIWU

Swarmers

Swarmers have a tiny model and are very easy for any class to trick and take little to no damage during a swarmer swarm. The easiest way to trick them is to simply stand on molly and jump up and down. Since swarmers are so small, none of their attack animations can reach you during the small amount of time you are in range. Here is an example in a large tunnel in crystal caverns. https://youtu.be/72N_W-Z36VI

Notice that the grunts aren't really attacking either. This is because the swarmers take up all the active attacker slots by sheer probability since there are so many of them, and the grunts go into idle mode. Once the numbers have thinned out the grunts will begin attacking again. So even though it looks like this trick would work on grunts from this clip, it does not.

Standing on a resupply also works. Though the one in this clip is badly placed and I don't really jump it still makes surviving a 6x2 swarmer swarm pretty easy. https://youtu.be/mDacELBMSsQ?t=1221

Enemy breakdown

Some enemies require more attention than others. Below you fill find sections for specific movement techniques to use against specific enemy types.

Shellbacks

Shellbacks are one of the more frustrating enemies, they don't have an audio or visual queue that they are coming. They blindside the player and kill them or put them in an unrecoverable position. The best response is to ignore them and try to sidestep as best you can. Get uphill from them and stay away from walls, shellbacks only gain speed when they "ricochet" off of a vertical surface. Depending on the biome you can also use stalagmites or other features on the floor to block their path. Biomes such as crystal caverns often have large protruding crystals, terrain chunks, and steam geysers that will block a shellback's path.

If you have a perfectly flat area with few walls they can be pretty easy to avoid. Sidestepping them as they come for you is easy enough. If you follow them around they won't be able to get you since they cannot turn sharp enough without a riccochet. If they get closet to walls, keep your distance and prepare to sidestep. Sandbox mod example: https://youtu.be/QmM-GWII2no. In a real game terrain like this is not going to happen, and the real threat of shellbacks is that they come out of left field with no warning while you are focused on other threats.

I'll just leave you with this advice: https://youtu.be/1tgJCipAvc0

Baby Shellbacks (younglings)

These are a little bit more consistent to handle since you know in salt pits they are coming and can prepare. Typically they come in packs which makes their sound effect a little louder, though they can still spawn right on top of a player and instantly juggle.

In general on salt pits you want to fight on a slope with enough lateral space to move left and right and dodge. The slope means that younglings can only attack you from the uphill side, so you can focus most of your attention on that side.

Once you hear them coming you want to switch directions as they get close. They have a very slight homing effect as they head toward you, even if you are moving at full speed if you only move one direction they will hit you. If you stand still for a second near the center of the hallway, and then shift toward the outside wall as they approach it is fairly easy to avoid them. https://youtu.be/psEFhtMDD34?t=540 https://youtu.be/t7SJwb58Kn8?t=894

If there is no ideal terrain available, and you are forced to fight in tight spaces on salt pits when you suspect younglings are coming soon. Fight from raised positions where they will have to jump to get you. An easy and consistent way to do this is to stand on a resupply near the outside wall of the tunnel. https://youtu.be/UMqlJa_ts7U

Always track where they go. Younglings with freedom of movement in a flat room are a huge threat. Here is a short clip where I thought they had rolled into the pit left by the drop pod and were trapped. Instead of verifying they were trapped, I assumed they were and it cost me the run when one bunted me into a bulk I was attempting to push past. https://youtu.be/bMpAM6uYgwA

Another technique for driller if the terrain isn't ideal is to use c4 to widen the hallways, and/or dig a pit to trap the younglings. Any sort of vertical terrain feature you can create to divert or trap the younglings can turn them from a very real threat into nothing. The following clip is from haz 5 so they move slower and aren't nearly as dangerous. But you can see I created a trap for them and once one passes me into the trap I can dismiss it from my mind since I know they are no longer a threat. Once the swarm is over I can go kill everything in the trap. In haz 6+ I would have used one additional C4 to make the pit deeper. For haz 5 they are pretty easy to trap as they can't jump very high. https://youtu.be/BGDKDjva3vg?t=640

Goo bombers

Goo bombers are extremely dangerous on high difficulty runs. Getting the whole team goo bombed is a quick way to get everyone overrun. Their blob projectile is slow enough that if you are utilizing A/D strafing (moving back and forth quickly) their projectile will often hit you since you reverse directions back into it. Get used to listening for their projectiles, and delaying changing directions for a beat.

Leeches

When exploring caves in the dark, listen for what sounds like a flare hiss gradually getting louder. If you hear it a quick dash will get you out of the leeches range in most cases. If you do get captured, there are two techniques in solo to "survive" that I am aware of. First is to take vampire and iron will, you can revive off of the leech itself if you iron will right as it releases you, look straight up and power attack. https://youtu.be/ELYX8aOHQIk?t=35

Second is to have in flight Plasma Burster Missiles. https://youtu.be/GpH0wKjs1GA

Mactera

Mactera in general are much easier to deal with in solo than multiplayer, isolated in multiplayer works as well. When fighting mactera alone, keep a mental list of which ones are going to die before they get their shot off, and focus on the mactera not in that list. Listen for attack sounds, watch their telegraphed attack animations with your peripheral vision and flick dodge to the side right as they fire. Because you are the only source of damage, you can know for certain which mactera are worth dodging and paying attention too. In multiplayer this gets a little more difficult if there are multiple dwarves in a group. You won't be able to mentally categorize which mactera are worth paying attention to since you don't know which ones other dwarves are targeting. In a group it is usually better to just dump AoE into the group, and have the gunner drop their shield so you don't need to gamble on which mactera shots to dodge.

Mactera Spawn

Mactera spawn are straightforward to dodge. Keep a reasonable distance of 10m or so. Listen for their attack sounds and keep track of their attack animation so you can time your side jumps for when they fire. Mactera aren't very threatening in solo play if they are all coming from one side. If mactera surround you, repositioning yourself so that they are all coming from the same direction is your top priority. Scout can always do this with grapple, gunner can shield if he can't reposition, driller can drill straight down into the ground, and engie can just get shot and die. All of the mactera need to be within your field of view so you can track their attack telegraph animation with your peripheral vision. The animation of their body puffing up is very distinct and bright so it should be easy to learn to do.

Mactera Brundle

Mactera Spawn and Brundle's have the same firing characteristics and dodging them is a matter of jumping or flick jumping to the sides. Brundles are a little tougher to pinpoint exactly when they are going to shoot since you cannot track their attack animation as easily as a mactera spawn. Once a mactera starts charging up a shot the will not move until the release their projectile. Since brundles are closer in than trijaws and spawn, once most of flock stops dodging around and starts charging up to fire, you line up a brundle to block some of the projectiles for you. This is particularly useful with trijaws as you can sometimes get a brundle to soak all 3 projectiles for you. This is also very easy to do in tunnels since the mactera cannot adjust their height to get a clear shot. Brundle blocks 2/3 trijaw shots - https://youtu.be/5uqZl-jqPyE?t=569

Mactera Trijaw

Trijaws have the same property of being much more difficult in multiplayer than solo. Their shots are very easy to avoid in solo because they are all targeting the only player. You can always dodge to the right a tiny amount and slip between their left-most projectile (from their perspective) and middle projectile. There is a wider timing gap between those two shots that is very easy to slip into. There is also an arc to their shots, so if you move forward slightly you can often slip under the arc, or if you are downhill from the trijaws they will tend to miss you often anyway.

Here is a short clip showing kiting a wave, a nemisis, and a handful of trijaws at the same time. You can see the dodges to the right keep me in that safe gap between their projectiles. I do die in this clip, but only because of molly getting in the way. https://youtu.be/2oiMjWej-8w?t=34

In multiplayer you can't use the same simple dodging technique because trijaws targeting other players will inadvertently hit you with their side projectiles. In these cases moving in closer to try and slip underneath their arc works more consistently.

Here are a clips facing mactera swarms showcasing most of the above advice. https://youtu.be/z7cXAwucsMI https://youtu.be/5uqZl-jqPyE?t=522

Mactera Grabber

Don't get grabbed. There isn't much you can do other than damage them to force them to disengage. Ideal weapons to face them with are things that have blowthrough to prevent other mactera from incidentally body blocking for the grabber. Mactera grabbers are a tax on your attention. They soak up a lot of your attention trying to find them quickly when they may not even be near yet. When you hear a grabber you have 0-30 seconds to react. On a team its not as big of a deal, but on true solo grabbers are often time run enders.

Bulk Detonator

Bulk detonators are very slow and easy to avoid, but there are some movement techniques associated with them.

The most useful way to manipulate a bulk is to use the gunner's shield to push it back. Once feared by the shield, the bulk will turn around (or back out in solo) and slowly move out of the shield radius. While it is doing this it will not attack. I have an older video breaking down the various ways to manipulate bulk detenators with shields here. Any sort of slow effect placed on the bulk will make it take even longer to get out of the shield and reorient itself. https://youtu.be/jUiZ2pUMt3I

Bulks can also be used by scouts to help clear. IFG can be used to slow the bulk and things near it, grappling past the bulk close enough will cause it to use its hellfire slam attack which will kill and ignite bugs. Since you are grappling past the bulk and IFG, bugs chasing you should continue to pile up around the bulk. Bulk detonators are scout's strongest weapon. https://youtu.be/zkJzl6PLivU?t=575

Or, scout can just IFG the bulk and grapple around it killing it to clear the wave. https://youtu.be/jUNE3lOtvcs?t=1332

Praetorian

Praetorian spit is one of the bigger threats in the game. It can travel through time and space to hit you when you feel safest, in your closet, under your bed, wherever. Praetorians may not seem like a big threat, but treat them with disrespect and they will hit you with their cheesy breath from an absurd angle.

The acid spit animation does not match the damage cone very well. Below the acid is relatively safe. For example, if you are on the edge of a cliff, and the praetorian is below you on the cliff edge looking up, its acid spray will not hit you 99% of the time, even though acid spray particles are raining down all around you because it travels in a bit of an arc. The sides of the spray where it looks safe, are not. The spray animation damage zone is much wider and longer than the animation implies and the praetorian will get well inside its maximum range before before trying to spit on a player. This means if it starts its animation, backpedaling will not get you out of the damage zone quickly enough. Depending on the situation getting above the acid spray is a good option. Trying to run past the praetorian is also a viable option. Keep in mind the spray damage zone is extremely wide, eve, just as it comes out of their mouth. In order to get out of its range you need to stop thing of it as cone and think of it more as a rectangle starting at the mouth. The best way to get out of it is to get past the praetorian's mouth on the side. This is generally a good idea anyway to hit it in the weakpoint. Getting above the spray is a good option if available. Here is a clip of climbing a c4 blast hole in the wall to get up out of the praetorian spray: https://youtu.be/t7SJwb58Kn8?t=234. I had just been hit by what I thought was a slasher from behind, so this was a safer move than backpedaling. Praetorian's model will also stop fall damage and bounce the player back up, so landing on a praetorian is actually a very safe move since ground bugs will have a very hard time hitting you.

Oppressor

Oppressors have three attacks to be aware of. Bite, Slam, and Rock wave. Bite is extremely dangerous, and especially as client. It can hit you at very weird angles. If you are trying to get in to hit the oppressor with a melee attack, don't stick around or it may bite you even if it looks like it shouldn't be able to. https://clips.twitch.tv/ApatheticGentleBatBudBlast-GMOwdBJ6HBR13fOO

The oppressor's real threat is from the slam and rock wave attacks. You can consider the Oppressor a slow annoying area denial type enemy. They aren't designed to kill you unless you go stand right next to them. They are designed to zone you out of safety. Oppressors are very slow, so one of the best ways of dealing with them is to mislead them when you see it has aggro on you. If you are standing in cover with your teammates when it initiates a rock wave attack, all of you are now being thrown around and knocked out of safety. If you see it coming and you leave cover to bait out a long attack animation, you can return to cover quickly and save your teammates from the disruption. The rock wave attack can be baited fairly reliably by standing out of range of its melee attack, but not so far that it tries to chase you. Eventually it will decide to rock wave, once it does, you can sidestep and walk past it to the weak point. https://youtu.be/fDvh5eyKvoM?t=579

Dreadnoughts

Dreads are not particularly interesting on higher hazards. There was a whole series of mods that tried to make them more interesting, but in general boss enemies are not DRG's strong suite. So overall don't bother with dread missions on 6x2 as they are not changed very much from haz 5.

That being said, here are some movement tips for when you encounter them in deep dives. In general dreadnoughts kill players because they are tunnel visioning on attacking and getting damage on the dread. Focus on evasion, attack when it is safe to do so without putting yourself in a terrible position. On a team, when the dread is aggroed on you, it is your job to position the dread so that your teammates can get a clear shot at its weakpoints. Most of the difficulty of dreads is self inflicted by teams all trying to do damage to the dread at all costs, taking tons of damage for no reason, and not working together. Classic example is the dwarf the dread is aggroed on trying to get behind it to do damage, causing the dread to spin around so no one in the room has clear shot. This makes it feel like there is a lot of pressure to do damage because no-one can hurt the dread and makes players start putting themselves in bad positions to deal damage, and then they go down.

All of the below videos are on solo, this means the dread animations are comically slow and really hard to get hit with. For multiplayer you have less time to react but all the same ideas apply. Also remember that when only one dwarf is surviving, the dread will go back into solo mode making it extremely easy to revive others.

Hiveguard

The hiveguard is probably the wimpiest boss in the game. He has no attacks that should ever hit you. His fireball attack has a very big arc, even more pronounced than the trijaw and move slowly. Most of the time simply moving sideways and/or forwards will slip the fireball. Keep facing the dreadnought so you can know when it is targeting you, and it should be more or less impossible to get hit.

The melee attack is equally non-threatening as the dread moves extremely slowly even on haz 6 4-player. If the dread is aggro-ed on you, just maneuver so that its weakpoints are facing your teammates and keep moving, it will not hit you.

Once the three weakpoints are exposed, the fireball turns into three fireballs in a row. It still should not pose any threat, just keep moving left right or toward the dread at a slight angle and they will not touch you.

The AoE rock attack during the weakpoint exposed phase give lots of warning before flying outward from the center of the dread. Right as they shoot outward the dread does a ground slam which will hurt anyone nearby. This attack is a greenbeard trap, as for some reason the opening of the weakpoint draws dwarves to the dread like magnets. You want distance during this attack, if you are not in a position to hit the weakpoint circle around at a medium distance and take your time. The dread does not turn while charging up his slam, and turns very slowly in between slams. Avoiding the rocks should be very simple unless you are standing right next to where they spawn. They fly straight out from the dread and explode on contact with terrain.

The most threatening part of the hiveguard in my opinion is the sentinels. Try not to power attack them to death since that will hit you with the slow goo more often than not. Shields are also not great against them because they have an extremely large AoE dig attack that can disrupt a team trying to stabilize in a shield. Cryo is good against them in my opinion since freezing them prevents leaving a goo puddle on the ground, which is the only reason you should take damage in a hiveguard fight is hitting a goo puddle at a bad moment.

Sample evasion video, keep in mind this is not a video to show how to kill one efficiently, its just showing evasion of its attacks. The only times I take damage are resupplying, and when I leap in for a power attack for no reason. - https://youtu.be/Y_tkJPylJJM?t=180

OG Dreadnought

OG Dread is a little more threatening than the hiveguard. It is still pretty much a greenbeard only killer though. With only a few tricks you can pretty consistently kill it solo or in a group.

The fireball attack flies in a straight line and is much quicker, you can't just lazily move forward or to the side to avoid it. A flick jump dodges this most of the time. You want to position yourself far away from any backstops, if the fireball misses you and hits terrain behind you and explodes it can still do a lot of damage. For this reason it is usually not a great idea to fight uphill from the OG dread in a sloped hallway. Any shots that you dodge are liable to hit the slope behind you and still hurt quite a bit. Depending on the height of the ceiling, downhill can be a bad choice as well if the fireball can hit the ceiling and get you with the AoE.

The slam attack gets a lot of greenbeards, and in multiplayer it can be quite fast. In solo as you will see below the animation is incredibly slow. If the rest of your team goes down in multiplayer the dread will revert to this animation speed. Simply bait the dread a dash's distance away from someone you want to revive and wait for it to start the roar or slam animation. Dash to the player and revive, you can get them up before the dread comes at you again.

Here is an OG Dread evasion video. Again this is just showing evading the attacks not how to kill it quickly. https://youtu.be/MaAdrGDaLfs

The twins

The twins are the only difficult dreadnought fight in my opinion. They have a lot attacks that can hit multiple targets, and when targeting a dwarf that is not you it's hard to predict how to dodge. We will start by breaking down the fight assuming you are a solo dwarf, this means that all attacks will be targeted against you exclusively and dodging them can be done consistently.

When the twins first hatch they do not have their complete moveset available. The arbalist will only use their explosive barrage attack, throwing three exploding balls onto the ground. This attack is relatively easy to dodge as long as you keep moving and don't walk toward the center of one of the areas. Since it presents the least danger, and the visual for the attack is actually on the ground in clear view, it is best to keep an eye on the lacerator during the first phase of the fight, and generally ignore the arbalist except to shoot it. During the first phase the lacerator has 3 attacks it can use. Flame breath, bite, and rock wave. The only dangerous one is the rock wave, which does a ton of damage. The lacerator will not try to bite unless the player spends a lot of time very close. As host you can also jump and ledge grab on top of the lacerator to avoid both the fire breath and the bite attack. Rock wave always spawns three rock waves in the same pattern: left, right, middle. If the target dwarf were stationary, the last wave, the middle one would hit. Generally the safest manure if you are the target, is to move toward the first projectile that it shoots out. The gut reaction of moving away from it is wrong, since that will make you dodge into the second projectile that will be fired a half second later. If you move toward the first projectile, the second one won't come anywhere near you, and the final middle shot will miss as well. Given the timing between the rock waves, even if you are not facing the lacerator but you hear the rock wave start firing, you have time to turn and find the first wave attack. This is better illustrated with examples. Rock wave dodges: https://youtu.be/ofyhk207nRk?t=8 https://youtu.be/ofyhk207nRk?t=17 https://youtu.be/ofyhk207nRk?t=30 https://youtu.be/ofyhk207nRk?t=116

In all of these examples, whether I was facing the lacerator or not, I can hear the rock wave attack start, snap to attention to the lacerator, and try to move toward the first projectile, ideally smoothly moving up behind it as it passes.

Phase two begins after the twins have health shared once. Each dread gets a new attack, the arbalist gets fire fan, which is in my opinion the most dangerous attack from any dread. The lacerator gets a burrow attack, which is harmless if you keep sprinting in any direction while the lacerator is underground. Since the stone wave has a much longer time from the sound of the attack till you are in danger, and the burrow attack is largely harmless if you keep moving, during the second phase of the battle you should focus your attention on the arbalist at all times. The fire fan attack is fast and not nearly as telegraphed as the other abilities. It can also be a nightmare to dodge when it is targeting an ally. I generally would suggest breaking line of sight with the arbalist, or at least staying very close to cover that will block fireball fan whenever you can. The fire fan attack is very difficult to dodge reliably when fired from directly above, especially in a low ceiling room, whenever you find the arbalist above you or at a very high angle on the wall, reposition to the other side of the room or behind cover as number 1 priority, burn dash if you have to

If the arbalist does target you with the fire fan from a low enough angle, and at far enough away, it is not very difficult to dodge. Just step slightly to the left or right to get out of the path of the center fireball, but not far enough to step into the path of the next fireball in the fan. https://youtu.be/ofyhk207nRk?t=119

When the arbalist does shoot straight down at you the best bet is to try to make a snap judgement about the orientation of the line of fireballs, and dash orthogonal to it. https://youtu.be/ofyhk207nRk?t=137 In this clip I could clearly see the way the arbalist was oriented on the ceiling so I knew which way the fireballs would be lined up when I heard the attack start. A small jump orthogonal to that is all I needed to get out of the path.

The biggest difficulty in multiplayer when fighting the twins is when they target another player, you cannot use the basic movement tricks listed here to avoid their projectiles. This is why I prefer to have cover when fighting the arbalist and to watch it at all times. The lacerator is mainly dangerous when the rock wave targets another dwarf and accidentally hits you with one of the side waves. Mitigating this is difficult, try to stay out of the lacerators left hand diagonal side at all times. That way when you hear the rock wave you know you won't be hit right away and have time to react to the second and third waves. Full twins fight focusing mainly on evasion: https://youtu.be/ofyhk207nRk

Getting better

The best way to practice is to play the game on high difficulty, there is no substitute. Playing on lower difficulty levels until you are "good enough" to play a higher hazard won't help, the habits you learn on hazard 5 do not translate well to hazard 6.

To start improving your kiting and dodging skills I suggest loading up true solo (no bosco) of your chosen difficulty on Point Extraction, Refinery, and 6/8 egg hunt. These mission types all tend to drop you into an unfamiliar cave with a massive enemy count already to go and no familiar cover for the player to abuse. Your skill with enemy prioritization and kiting will need to improve drastically in order to clear the cave. Usually I will fight until I die without getting a resupply, typically this is during the first swarm when I run out of ammo. As your skills improve you should be able to survive longer and longer even once your ammo runs out.

Here are a few example clips showing driller and gunner clearing a point extraction landing zone. FSD Flamethrower Driller - https://youtu.be/HABQRu6ScCE Ice Spear Driller - https://youtu.be/QpQiDTuRN68 Leadstorm Leadstorm (LSLS) Gunner - https://youtu.be/bMcKp_B1pi0

If you want to actually get a win, 4 egg hunt true solo 6x2 is a good game mode to dip your toes in. There is only 1 swarm and you control when exactly it is and can be ready for it. You have two or more options of where to go from the starting room so you can choose the easiest and have more chances to find nitra before needing to breach into the main cave.

The "gold standard" of 6x2 viability is true solo 200 morkite mining missions. These force you along a linear path where you need to deal with whatever terrain comes along. The swarm timer is brutal and your pace needs to be equally fast.


r/technicaldrg • • Aug 04 '22

build Tips, Tricks and Tools: How to Set Up Your Equipment Properly

65 Upvotes

Deep Rock has a fairly large pool of weapon and upgrade options to choose from, and as such weapon diversity is quite high. In contrast, however, equipment and tool upgrades are fairly limited and provide minimal impact over their performance, which is a double edged sword. Equipment is both reliable, and fairly stagnant, with often only one or two mod choices ending up being relevant. In this post, I'll try to outline the right1 setups, and point out some pitfalls on the way.

1. These are all my opinions. While I'll try to provide an unbiased stance, some of my personal choices will likely filter through, so keep that in mind. At the end of the day, use whatever mods you're comfortable with, but I recommend experimenting with each and every upgrade in the game to find out which you enjoy the most.

Armor

Armor is unique in Deep Rock in that it is the only piece of equipment to share nearly the same mod tree across all classes (other than the pickaxe, but that only has one mod choice). The only difference between class armor options is the benefit of the tier 3 mod, which is the only pick on its tier anyway.

Tier one of the Dwarves' exosuits is probably the most controversial. The one option I would NOT recommend is Boosted Converter (unless you're running Shield Battery Booster), as having your shield up quickly becomes incredibly important on modded difficulties in order to avoid death by a thousand cuts from chip damage. Improved Generator is my personal pick, and the one I would recommend the most, precisely for the reason listed above.

Bigger Mineral Bag's biggest selling point is that it allows the team to gain a resupply more quickly (specifically, it theoretically takes one whole trip less). While this used to be true when partial Nitra chunks wouldn't autofill your inventory, this has since become a non-issue, as you can no longer have 39 Nitra in your pockets and be "full" (as of Season 1 I believe, perhaps earlier). This also only really applies to vanilla gameplay; on modded difficulties with a reduced resupply cost, the issue is even further diminished, as unless you're playing with 45 nitra costs (the common values are 40 and 60), having 5 more minerals in your pocket isn't solving a problem, it's just something to make the mission go by slightly faster. (Or slightly slower, as it takes that much longer to deposit 45 of a mineral than 40, which can stack up if you end up filling your pockets often. This is most notorious with Gold being prioritized for depositing over Nitra, which can lead to a team not getting a resupply fast enough.) Personally, I would only take this mod to stack it with the Deep Pockets perk.

Tier two is Overcharger vs. Healthy. While it's debatable which of these mods is the optimal choice, I run Healthy for two reasons: Shield Disruption and Resupplier. Shield Disruption completely negates Overcharger, and Healthy is necessary to make full use of Resupplier's extra health gain. This is probably not a tier you should really think about; either choice is fine. If you find yourself dying often to repeated chip damage, perhaps consider switching to Overcharger; if you find yourself getting chunked down often by hard-hitting enemies, maybe reconsider Healthy.

Tier four is a bit of a noob trap. Shockwave and Static Discharge are both poor picks, both because their impact is pitiful and because their effects are often very buggy (sometimes they just don't even proc, even if their conditions are met.) Breathing Room is really the only mod you should consider here. I will give Static Discharge some merit: it is useful on true solo runs (where Breathing Room has no effect), as the electric proc will slow slashers and prevent them from slashing you twice in a row.

(1/3)213

Drills

Driller's mobility tool is arguably the most versatile in the game, allowing you to completely avoid enemies (as long as you have fuel), travel up or down any height, clear out massive expanses of terrain quickly, and easily Stun or Fear enemies away from you, as long as you're able to get within close range.

Hardened Drill Tips and Barbed Drills are the only options on tier one worth considering. More drill damage is nice especially for proccing Vampire more often, but for me faster drilling isn't worth giving up, as it can make the difference between life and death when trying to escape from certain enemies. A popular argument for Barbed Drills is that you really only move slightly slower than with Hardened Drill Tips, as your player movespeed is not enough to keep up with the faster dig rate, and you end up wasting fuel on drill ticks that don't actually drill terrain. However,

a) this math only applies when you are drilling directly forward, and you will immediately notice the difference between fast and slow drills when drilling up or down,

b) drill fuel is plentiful, and is worth wasting if it'll keep you alive, and

c) you can "cancel" the wasted tick of drill digging by releasing the trigger every 4 ticks.

Tier two is a pretty weighted choice: Magnetic Refrigeration is pretty much what you should run all the time. Streamlined Integrity Check reduces your overheat time, but overheating is still a bad idea, and a quicker cooling rate lets you avoid it in the first place more easily. Just have some self control when you're drilling and Magnetic Refrigeration will be worth its weight in gold. (I dunno how much a weapon modification weighs.)

Tier four is a joke. If you're drilling enemies for long enough that you end up overheating from it, you're doing it wrong. Drill enemies for a couple ticks here and there to proc Stun, Fear, maybe a couple Vampires, then go back to using your weapons. Take Increased Tank Pressure and forget about this tier.

(1/2)111

C4

On modded, the usual Haz5 technique of blowing a cluster of grunts away with a C4 is pretty inefficient, and is most often solved more easily with the rest of your arsenal. More damage is not helpful when all of your killing power comes from your weapons; thus, taking both ammo mods is the optimal route. This means that there should really only be one distinction between your build: Concussive Blast and Rock Mover. Stun C4 is worthwhile if your team is often struggling to create on-demand breathing room, while carve C4 is much more valuable on mission types like Salvage or Refinery, where quickly clearing an area becomes necessary. Big Bang isn't really worth it, as Fear can be much more unpredictable than Stun, and when used in a panic situation Fear may force enemies behind your team where they can then creep back up on unsuspecting teammates.

Don't take Volatile Compound. Please.

211(2/3)

Platform Gun

The plat gun is Engi's strongest tool in modded. Specifically, Repellent Additive is by far the most impact an Engineer can have on a mission's success. Properly placed repellent can turn a guaranteed death zone into a solidly fortified position. Nothing else on tier three is worth taking (at least in team games; it could be argued that repellent has minimal impact in solo), so let's jump back up to tier one.

Supercharged Feed Mechanism feels nice, but its effect is almost entirely mitigated with simple animation cancelling. Thus, the choice for this tier is narrowed down to Expanded Ammo Bags and High Capacity Magazine. Personally, I like the additional ammo, as the extra plats are helpful for cleaning up messy terrain while also having enough for putting up repellent lines. However, I can also see the merits of a larger magazine; being able to place down more plats in a shorter timeframe can be useful when the team is under pressure, and more plats in the mag means you can "parkour" with them for a longer distance before having to reload.

(2/3)12

Turrets

Engi's turrets sadly do not scale very well into modded difficulties. On Haz5, they can shred through most of a wave alone; on modded, they can barely handle a cluster of shockers before they reach the team. Their damage output is honestly pathetic, even when they're not laser focused on dumping all of their ammo into an Oppressor's face. Their biggest benefit is Stun on tier three, so most of these mod choices will be built around that.

Gemini System gives us an extra source of stun, while also shredding through small targets twice as fast (when they're properly targeted). LMG MKII cuts down on turret placement time, but if you're taking Quick Deploy in tier two (which you should) build time is pretty much a non-issue anyways. The only real other benefit to the single turret is the slightly longer range, which might take out a Spitter or two that the team missed, but other than that Gemini beats it out by a mile, offering much more crowd control and more opportunities to inflict turret effects such as EM Discharge or Turret Whip.

Widemouth Refill Port is pretty pointless, especially compared to the other options on tier two: Expanded Ammo Bags and Quick Deploy. While more turret ammo is nice, realistically the turrets aren't going to do much extra with additional ammo, and the faster build time is pretty much necessary to retain turret uptime while on the move.

Tier three with its Stun is what we're building around, but I'll give a quick shoutout to Penetrating Rounds, which does prevent your turrets from wasting ammo quite so much by still allowing them to deal (poor) damage against Praets and other armored targets when they inevitably lock onto them. Along with this, if you're using Turret Whip on the Warthog, Stun can actually be a drawback, as Stunned enemies may end up separated from the cluster you wish to Whip, which can lead to wasting it on a lone target. Expanded Ammo Capacity can be nice if you don't want to babysit your turrets quite as much, but is overshadowed by the other options.

Defender System vs. Hawkeye System is a no-brainer. Turrets already deal minimal damage even with the +5 bonus from Defender; replacing that with a range boost and a clunky, poorly implemented manual prioritization system is not a good bargain. Plus, Defender's limited firing angle can actually end up being a boon, as you know where your turrets are going to be focusing their firepower and can keep tabs on them more easily. An argument could be made for combining Hawkeye and Turret Whip, but if you place your Defender turrets intelligently, you'll already know where they're firing and thus have already "faux-aimed" them.

12(1/2)1

Zipline Launcher

Gunner's mobility tool is often touted as the worst of the bunch by far. While this is not necessarily untrue, the gap between them all is much closer than most think. Ziplines have a LOT of utilities that go underused; they have way more interesting uses than just getting a fossil that Scout missed. I'll quickly cover some so that we know what we actually want from our zipline build.

  1. Mobility is the simplest one. Ziplines can be used in long angled corridors in Mining missions to give the team a quick little speed boost. They also make a great team-wide transport system on missions where you need to raise carried objects: Point Extraction, Salvage, Egg Hunt, Escort, etc.

  2. I often see combat ziplines placed incorrectly or ineffectively. The optimal combat zipline is just low enough that if you fall off you'll take minimal fall damage, but still high enough so that ground bugs cannot reach you. Bonus points if the zipline is inclined just enough so that you can quickly gain the downward speed boost if you need to dodge a ranged attack.

  3. Combat escapes are a use I almost never see, though understandably; they're very situational. Think of the zipline launcher like a more limiting platform gun: if you're on a cliff above a tall map and bugs are encroaching on you, you may or may not be able to quickly pop off a zipline and zip to safety, which gives you quite a lot of breathing room and can remove a large source of danger. This works best on the commonly vertical Point Extraction maps if you get caught off guard while exploring for Aquarqs. If the zipline fails, you can of course pull out your shield instead.

The first tier determines how mobile our ziplines will be. Out of the three options, the one I would recommend the least is Reinforced Anchor. You will very rarely find a cave that simultaneously needs a 50 meter and a less-than 40 degree zipline. From my experience, the only times I've been missing this mod are when I'm a few meters off from the max distance, which are typically situations where if I was missing Upgraded Connection Joint I still would have been unable to place a zip. Expanded Ammo Bags is a worthwhile choice if you find yourself spamming ziplines often, but for me if I'm out of ziplines I've likely exhausted all my other ammo as well, so a single extra zipline probably won't be saving me.

Tier 3 is a more interesting choice. Currently, Disconnection Protection is bugged such that if you or a teammate hops on and then off a zipline, you or they will retain the fall damage resistance until death or the mission ends. Even with this (obviously unintentional) bug, however, Increased Motor Traction is much more valuable to me, as if you're skilled enough with zipline riding you can simply avoid fall damage, but it is much more difficult to avoid ranged enemy fire on a slower zipline.

(1/2)1X

Shield Generator

Shields are arguably Gunner's most powerful boon in a team. On-demand breathing room in a wide radius for a considerable length of time is nothing to scoff at. Shields can be used proactively to protect an entire team and keep their health and ammo up in a dangerous situation, or reactively to cover a revive or a desperate resupply. There are typically two schools of thought when it comes to shield usage: lockdown and hit-and-run.

Lockdown builds prioritize a longer shield duration and typically forego the faster generator recharge mods. The mindset here is do everything you can in one shield, then move on. The build I would recommend here is 223, which gives you 9 (actually 12 due to a bug(?)) seconds of shield duration, more than enough to get a revive or resupply off while still giving you plenty of time to lay down the hurt on some encroaching dangers.

Hit-and-run is much more mobile, and typically prioritizes shield size, generator recharge, or a mixture of both. The builds I would most recommend for this mindset are either 121 or 213. 121 gives you a larger shield at the cost of slower generator recharge, while 213 provides the opposite. It's up to you which you value more.

Above all else, I recommend taking exactly one shield size mod (and at least one duration mod). Taking neither means your shield really doesn't help out anyone but yourself; taking both sacrifices either duration or recharge and doesn't give much in return, as a single size mod is already plenty to cover almost the whole team. Sure, you can fully cover Doretta with a big shield, but if you're shielding Doretta after she's completely covered in bugs, you've made a mistake that might have been rectified had you brought a different shield build.

Lasting Effect is pretty pitiful. I'm unclear on the exact numbers, but you're giving up 1.5 extra seconds of shield duration or a size mod for 1 second of slightly boosted shield regen and (I believe) a lesser version of the damage reduction you receive in the shield. Not worth taking.

121, 213, 223

Grappling Hook

The grappling hook is Scout's bread and butter. If you're not using the grappling hook in literally every situation possible, you're missing out on Scout's full potential. Scout can use his grappling hook in almost every circumstance; its only weaknesses are extremely tight corridors and caves too massive to meaningfully grapple around. Grapples can be used mid-combat to dodge attacks, quickly reposition, charge into or escape from a dangerous situation, and so much more. Outside of combat, they can of course be put to use in expediently dealing with various objectives, but in my opinion speccing for combat practicality is much more important.

Tier one is a pretty even split. Improved Recharger and Longer Cable are both excellent choices. I personally run Longer Cable as I find that oftentimes caves are just long enough to where I would be kicking myself if I had only a 25 meter long hook. A faster recharge will let you be much more mobile in smaller rooms, which may be life or death in some situations.

Tier three is a bit of a noob trap again. While the difference between the two mods is subtle, High Velocity Ejection System is much more useful than Overcharged Winch in most situations. The difference between taking off after 0.2 vs 0.4 seconds doesn't seem like a lot, but when you're in the middle of a pile of bugs that 0.2 second difference can be the thin line between getting bitten 3 more times or escaping safely with your health intact. Overcharged Winch doesn't really give you much benefit aside from training your muscle memory differently. The grappling hook tends to misbehave when used as client; Winch exacerbates this issue tenfold, and you will often find yourself dead when you thought you hadn't even left the ground yet. It's also much safer to power attack and land on a mineral vein without Winch, as you have a lot more time to react and you will hit the wall with less momentum, giving you less chance of bouncing off.

The fourth tier has some mechanically interesting options, but ultimately you want to take Bypassed Integrity Check. Momentum is fun to play with, but is not worth giving up a full second of recharge duration for; Safety First, akin to the Zipline Launcher's Disconnection Protection, is bugged and will give you fall damage reduction until death or mission end, but a skilled Scout can avoid most fall damage anyway.

X113

Flare Gun

And finally, we have the tool that pub Scouts hate most: the flare gun. Debatably Scout's greatest gift to a team, the flare gun is essential in lighting hard-to-reach objectives, and is a great early warning system for far off enemies. A well-lit cave can be the difference between a team holding their position or getting overrun.

The main meat of the flare gun involves some math, but before I get into those I want to discuss the more mechanical mods. High Capacity Magazine on tier two is honestly a pointless mod, as while you can animation cancel to speed up the flare gun's fire rate similar to the platform gun, there is realistically no situation where quickly getting out four flares is going to be a life-or-death distinction. Similarly, Auto-Reload is a mod you should pretty much never take; even if you're not running Born Ready on your Scout (which you should), reloading the flare gun should be your lowest priority in a combat situation, and Auto-Reload is competing with an ammo and a duration mod.

The flare gun's ammo and duration mods each give the same bonus regardless of their tier. This means that we can split them into three groups: both ammo mods, both duration mods, and one of each.

  1. Both ammo mods gives us a flare duration of 75 seconds, and a flare count of 21 (including the magazine). This gives us a maximum total of 1,575 seconds.

  2. Both duration mods gives us 15 max flares each with 105 seconds, for the same max total of 1,575 seconds.

  3. One of each mod gives us 18 flares that last 90 seconds each, which gives us a total of 1620 flare seconds.

One option looks superior, no? However, consider that you will likely not utilize the full duration of every single flare you shoot. This can be due either to shooting too many at once, or having the team move on from a cave quickly after entering it. Typically, the only situation in which you will use each flare you shoot to full effect is static defense objectives. My personal pick which in my opinion has the most versatility is taking both ammo mods, as if you end up wasting a flare, it doesn't hurt quite as much as with another build.

X1(2/3)

Afterword

Please keep in mind that all of these recommendations are just that: suggestions. Nobody should be forced to play a game a certain way, and you are free to choose whatever builds you want. Experiment and find out what works best for you, and what you're most comfortable with. Don't just brainlessly copy someone else's setup and never glance at your build again; you'll likely miss out on options you didn't even realize could shake up your playstyle. Forge your own destiny, be your own dwarf.

Except Volatile Compound. That's throwing.


r/technicaldrg • • Aug 28 '22

guide A (Hopefully) Comprehensive Guide to Animation Cancelling

63 Upvotes

Animation cancelling is a vital technique in Deep Rock. It has numerous benefits: it massively increases your DPS, allows you to quickly perform multiple actions much more expediently, and can generally tighten up the flow of a mission greatly, which is very important in a wave-based horde shooter such as DRG, where the timer is always ticking. On top of all this, most animation cancels are very simple, requiring minimal time and effort to quickly weave into your gameplay.

WARNING: As of Season 2, animation cancelling and animations in general have become incredibly difficult to predict and pull off when playing as client. Often when attempting a cancel, your dwarf will be stuck holding whatever tool you attempted to cancel with and will simply stare at it like a dumbass. For best results during practice, play as a host or in a solo mission.

What is Animation Cancelling?

Animation cancelling (or "anim cancelling", or simply "cancelling") is using one animation to interrupt or replace another. For example, you cannot simultaneously reload a weapon and use your Pickaxe to mine, because the animations overwrite each other. With practice, this can be used to cancel out an animation of undesirable length (such as a reload) with a partial animation that can then be cancelled itself very quickly (such as pulling out and putting away the Laser Pointer).

There are three popular methods of animation cancelling: using the Pickaxe, using the Laser Pointer, and switching weapons (typically done with the "previous weapon" key, which by default is Q, though can also be done with the number keys that change to specific weapons).

  • Pickaxe cancelling can be timed and pulled off quite quickly and easily thanks to the default binding being a mouse button. However, pulling out the Pickaxe even for a frame will cancel your sprint; both toggle- and hold-to-sprint players will need to begin their sprint again after Pickaxe cancelling. This will not occur if you are airborne when you cancel.

  • Contrary to Pickaxe cancelling, Laser Pointer cancelling will not cancel your sprint, which may make it a more appetizing option. However, consider that the Laser Pointer is by default bound to the Ctrl key, which may make timing certain animations difficult without a bit of practice. You can of course rebind it to a more comfortable key if necessary. The Laser Pointer is what I personally use.

  • Weapon swap cancelling (or "Q cancelling") will not cancel your sprint, but it will of course swap your weapon. In the heat of the moment, this may mess up your muscle memory and end up costing you a life saving shot or getting a teammate accidentally teamkilled, so this method will likely require the most practice out of any. However, it can be particularly useful with certain weapon and/or tool combos; I frequently cancel my Flare Gun reloads by switching to my Grappling Hook.

All three of these options can be used to great effect; it's up to you to decide which are most comfortable.

You can also cancel animations by throwing grenades, taking resupplies, repairing Doretta, etc. These are all very situational cancels, and don't particularly warrant any practice time. If you get the opportunity to, you can use them, but the methods mentioned above will be much more general and easier to pull off.

What should I be Cancelling?

There are typically four major uses of cancelling.

Reload Cancelling

When a gun is being reloaded, once the ammo counter (in the lower right hand corner of the screen and on the weapon) has been replenished, you can safely cancel the rest of the animation. The major benefit to this is that once the cancel has completed and your weapon model has been "pulled out" again, you can fire immediately, and typically much more quickly than you can when waiting out the full reload. The most noticeable effect is on the Warthog, though all reloadable weapons can benefit from this technique; the trick is getting the unique timing down for each weapon and overclock.Side Note: Non-reloadable guns, particularly those that have an overheat meter instead, do not benefit from their "gunsling" reload animations. They will not cool down faster when these animations are played. However, the animations that are played at the end of the overheat period can typically be cancelled to resume firing sooner. (This is not the case with the EPC: the animation can be cancelled as soon as the gun overheats, but the heat meter still dictates whether or not you will be able to shoot.)

Grenade Cancelling

Grenade cancelling is a more advanced technique, and requires two simultaneous inputs. Both the grenade key and your preferred cancel key must be pressed in tandem with each other, then fully released. The timing for this tech is much tighter and trickier than any other cancel, as you can end up spamming it too quickly and the grenades will not be thrown; but it can allow you to dish out insane damage very quickly with an Impact Axe salvo, lock down a massive area with multiple IFG's, quickly freeze Dreadnaughts or Bulks with three Cryo Grenades in a row, and so on. All throwables can be cancelled in this manner. It is easiest to practice this tech with axes, as they can be retrieved, and their high quantity allows a lot of wiggle room to get the timing down.

There is also a technique to "double bind" your grenade key; that is, to bind a key such that it executes two actions at once, which in this case will be throwing a grenade and cancelling the animation at the same time. While this technique may be unpalatable to and seen as an exploit by some, it is debatable whether or not this can truly be considered cheating, as 1. the technique can already be accomplished without this tweak, and 2. Season 2's animation changes have made it extremely difficult to grenade cancel as client without double-binding, seemingly unintentionally. I highly recommend double-binding if you regularly play in medium- to high-ping lobbies.

Action Cancelling

Action cancelling applies to actions that typically don't directly influence the flow of combat, such as mining or depositing. While not as valuable as reload or grenade cancelling, action cancelling can greatly speed up certain mission types. Here is a list of notable/relevant actions that can be cancelled:

  • Mining. While it's debatable whether or not this actually speeds up missions (EDIT: u/SheepHerdr has graciously done some frame analysis in this video and concluded that cancelling mining does in fact provide a slight speed bonus.), releasing your pickaxe button just after hitting a mineral you are mining and then pickaxing again immediately can be used to make mining more enjoyable. If your cancelling isn't particularly tight, you likely won't notice much of a speed boost (if there even is one at all); but it makes mining more engaging that simply holding down a button and looking at a wall. I would recommend not performing this technique as a client: as of Season 2, cancelling mining as a client is incredibly frustrating and is objectively slower than simply holding the button, due to your pickaxe being pulled out twice (once when the button is pressed, and again after a ping-dependent delay). Power Attacks can also be interwoven between strikes to very quickly gain an extra hit on a vein.

  • Depositing. Before Season 2, there was a technique to quickly deposit in the Minehead, the Refinery, and the Drop Pod, which consisted of solely spamming the deposit button as quickly as possible. This would input 5 minerals per deposit, which greatly increased depositing speed. Currently, in Season 2, the technique has changed a little: you now have to spam both the Deposit and Pickaxe buttons alternatively, but the tech now applies to every deposit point, including Molly, and it works for clients. This can DRASTICALLY increase mission speed particularly on mining missions, as you can now empty your pockets roughly in the time it used to take to deposit only a partial stack of minerals.

  • Throwing. When throwing a heavy object (Jadiz, Aquarqs, etc.), the throw animation can be quickly cancelled to allow you to re-grab the object if necessary, or to begin firing a weapon sooner.

  • Ledge-grabbing. While the possible existence of a benefit to this tech is unclear, a ledge-grab animation can be cancelled without halting your movement. As the ledge-grab animation is quite short, cancelling it may or may not provide a tangible speed bonus. Ledge-grabbing itself, however, is a double edged animation cancelling sword: dying because your dwarf decided it was a great idea to put his hands to use mantling over a tiny lip of terrain, rather than continuing to shoot at the massive swarm encroaching on you, is never fun. As such, its cancel tech may be worthwhile to learn. Note that ledge-grabs cannot cancel an in-progress reload; that is, if you are reloading and ledge-grab, the reload animation will still play out.

  • Channeled actions cannot be sped up with cancelling. This includes actions such as reviving, resupplying, building pipelines, etc. These animations do not depend on how many times you play them, but on how long the animation is played for. In the case of Doretta, attempting to cancel her repair can actually have negative consequences, as the repair tick is reset every time a player begins the animation.

Weapon Techs

Certain weapons and tools have interesting and unique cancelling techs that can help them solve disadvantages they may have.

  • The Flare Gun and the Platform Gun (without their respective fire rate mods, though I recommend taking the Flare Gun's) can benefit from cancelling their shots. This is done by shooting, cancelling, waiting for the weapon to be pulled out, then firing again; this ups their fire rate drastically.

  • The BRT's burst can be cancelled to preserve ammo and keep spread low when necessary. This also applies to the LOK-1.

  • The Hurricane's missile tracking system can be cancelled by swapping to another piece of equipment, which can be useful for hitting long-range targets without the need to stand still and glare at them for a half hour. (This isn't technically a cancel, but I figured I'd mention it here anyway.) This is most easily done by swapping to another weapon, as the Laser Pointer or Pickaxe will need to be held down. Note that when the Hurricane is swapped back to, its tracking system will re-engage and all active missiles will converge back onto your cursor.

  • When using the Pickaxe to mine, its animation loop is quite quick. However, when impacting an enemy or an Ebonut, a different and much slower animation cycle plays. This cycle can be cancelled to deal melee damage much more quickly to enemies. While of limited use in combat due to how dangerous Pickaxing enemies can be, this tech is much more useful at quickly killing Lootbugs, as well as collecting Ebonuts much faster.

  • With an autoclicker, the Minigun can be fired without ever generating heat, but other than being an interesting example of how animations can interact, this is an obvious exploit and as such I won't provide a demonstration video.

Why should I Cancel?

Animation cancelling can greatly optimize your gameplay, both in moment-to-moment combat and the general picture. A faster mission exponentially increases your chance of success, as less chances for swarms means less ammo consumed, which means a much bigger safety net if your team makes a mistake. A smoother combat experience with more weapon uptime and much quicker grenade tosses can dampen being overwhelmed by threats and make an insurmountable situation more approachable. Weaving animation cancels into your everyday gameplay can take time and effort, but the payoff is well worth it. Above all else, animation cancelling can be enjoyable to learn and master; and if you don't feel like you're there yet, don't sweat it. Even highly experienced players mess up reload cancels and get their teams wiped every so often.


r/technicaldrg • • Apr 10 '23

build BUILD BREAKDOWN: Volatile Impact Reactor (Engineer's Shard Diffractor) [MODDED: 6x2]

62 Upvotes

Intro

Engineer has always been the "flex" class in a modded team, thanks to his wide choice of weaponry that excels at multiple different roles. Aside from the powerful all-purpose Breach Cutter, with the advent of Season 2 comes a new contender for his secondary slot: Shard Diffractor's VIR, offering Engi a high-performance infinite range trashclear AND ignition source.

No Breach Cutter?

"Engineer in 6x2 with no Breach Cutter? That's absurd!"

Ever since I started playing modded DRG, I've always been plagued with the notion that Breach Cutter is the sole usable option, because of Engi's inherent extreme reliance on a self-defense tool. This has never been further from the truth, as even though not having any on-demand stun or instant trashclear will make your lives harder as an Engi, it is by no means a requirement, and Engi can totally get by with his life intact with only precognition and general macro knowledge.

Why VIR over Inferno?

First and foremost, I want to make it crystal clear that VIR is NOT better than Inferno, it is a sidegrade. VIR provides the standard fire comp with less reactive power against both dense groups of trash and clouds of Mactera, leaving this niche unfilled.

With that being said, let's quickly note VIR's strength as a standalone weapon:

  • Infinite-range trash clear with little to no dependence on stable FPS, thanks to its high application rate. This also means less reliance on Driller to provide waveclear against small-to-medium sized swarms.

  • Effortless ignition source at any range for VB and Executioner shenanigans.

  • Can be a semi-decent single target weapon, provided the enemy is afflicted with IFG.

Mod Tree Breakdown

VIR is incredibly flexible when it comes to upgrades, and it only has a soft requirement of T1 ammo and T4 Heat. Everything else is optional.

Tier 1

Here we have more AoE damage, more direct damage, and more ammo. VIR is primarily used as a waveclear option with its magma trail, and the first 2 options do not contribute anything to that.

Take Larger Battery (+100 ammo).

Tier 2

We are presented with bonus weakpoint damage multiplier, and larger AoE. The former allows VIR to function as a single target damage dealer, even though I personally almost never use it as such; while the latter synergizes with T5C slowdown. There is no perceptible difference in ignition performance against Goo Bombers - both pop goo sacs at the same time.

Take either option. I prefer Soft Tissue Disruption (+33% weakpoint bonus).

Tier 3

A low impact tier, with slightly more magsize, and slightly better reload speed. I almost never take reload speed on any weapon, because they usually offer reload cancelling benefits, and Shard Diffractor is not an outlier.

Take either option. I recommend Aluminum Foil DIY (+50 charge capacity, reduced to +25 due to VIR's penalty).

Tier 4

A no-brainer tier, offering better ignition rate and armor breaking. If AoE weapons' armor breaking weren't completely non-functional, I still wouldn't touch it with a 10ft pole. More Heat means you can ignite HVTs and stationaries faster for those juicy VB shots.

Take High Intensity Heating (100% damage added as Heat).

Tier 5

The final tier offers some "build-defining options" that quite literally don't affect VIR in any major capacity.

  • More damage against electrocuted enemies is nice, but exceedingly rarely useful, considering the fact that Executioner is a common pairing to VIR.

  • Ammo refund on-kill only works on direct damage kills, not magma kills, so it's practically useless.

  • Heavy slowdown against enemies directly hit is not bad, but again, rarely useful since you won't be keeping the beam locked onto a singular target for very long.

Take either Hydrogen Rupturing (+33% Electric damage against Electrocuted targets), or Dazzler Module (Beam applies an 80% slowdown effect for 1s).

Primary and Grenade

There is almost no deviance from standard meta Engi builds in this regard, as VIR requires little synergy from his primary and grenade.

Executioner is widely considered by most, including myself, to be one of the best Engi primaries, and that remains true in this case. Executioner offers absurdly fast TTK against a multitude of HVTs, which is only bested by VB in most scenarios. Since VIR is highly proficient at trashclear, this loadout grants Engi the autonomy to deal with tanky targets and spitters without much hassle. With that said, any Warthog builds, or ECR can also be an excellent fit in the primary slot.

As for grenade, anything not named Shredder Swarm will serve you well, like in other Engi loadouts. LURE is my default pick.

The only primary I would recommend against pairing with VIR is EM Discharge, despite it being my second favorite Engi primary. Both do the same job of clearing trash, and both take up most of your attention to operate efficiently.

Playstyle and Tips

  • Be proactive about your positioning. By taking VIR, you lack the immediate response button against Mactera and common trash, meaning you will have to put even more effort on kiting and predicting bug pathing while on the move.

  • If possible, opt for an open hold. VIR performs much better when you have clear line of sight of the cave.

  • If Gunner brings VB, ignite HVTs and stationaries the moment you see them. VIR provides Engi with much more freedom to ignite targets than Breach Cutter's Inferno, making this a no-brainer whenever facing anything that needs deleting ASAP.

  • Ending VIR lines near you while skirmishing is a good habit to get into. VIR is no Breach Cutter, but it still shares similarities to Sticky Fuel and can provide Engi with hands-off waveclear outside of holds, so long as you offset the pitiful VIR slowdown with adequate kiting.

  • Try not to use VIR as a single target source unless absolutely necessary. VIR shares other Shard OCs' weakness of costing time, attention and mobility to deal any significant damage to a singular enemy. Your primary should always cover this niche.

VIR vs Sticky Fuel?

A common misconception raised by newcomers to the VIR enjoyer club is that it is better than Driller's Sticky Fuel, but nothing could be further from the truth.

  • VIR has better range than Sticky, but both are effective against trash, and trash poses no threat at long range.

  • VIR has no blowthrough, rendering its application much harder if there are multiple enemies blocking line of sight.

  • VIR has the same DPS as Sticky (40 DPS), but only 30% slowdown, compared to Sticky's 55%. This is much more apparent as a problem in Hazard 6+, where enemies has higher movement speed and can run pass a VIR line without getting ignited.

  • VIR magma lasts for 7s, while a standard 23232 Sticky Fuel build provides 11s flame puddles.

  • VIR magma has a much smaller hitbox than Sticky's flame puddles (0.3m3 vs 0.75m3 ).

Conclusion

VIR is a valuable addition to any non-cryo comps. Long-range supplementary waveclear and instant HVT ignition are 2 of its most important quality. Despite lacking in self-defense, VIR's higher attention cost and skill ceiling results in a more engaging gameplay loop than Breach Cutter. Though nowhere close to Sticky Fuel's prowess as a standalone trashclear weapon, if paired with Executioner, VIR is surely going to make you feel like a Driller-Gunner hybrid, with high single target and incredible AoE.


r/technicaldrg • • Aug 10 '23

breakdown A bit of Insight on 2321X Hipster [Reformatted]

61 Upvotes

Hipster, an OC Of All Time

reformatted for clarity & some info condensed into tables, original post by u/Djinneazam

I use 2321X Hipster for the general utility it provides while having greater magazine capacity and total damage pools compared to focus builds, while also having greater short range target flexibility and burst DPS. I am primarily going to focus on comparing 2311X Active Stability System with 2321X Hipster, as I believe that ASS build to be the closest comparison that is also frequently taken to regular modded gameplay. This is not to prove that Hipster is the best OC, over or underpowered, or better than ASS focus builds. This is just for my own amusement, and possibly the rage of others.

Note: BT = Blowthrough : WP = Weakpoint

All clips in H6p4 unless otherwise noted

TBH, I’m not planning on watching my reddit comment section too closely

Hipster vs Base m1k against grunts - Theory.

Let’s start with some theory. You’ll hear that Hipster is less ammo efficient than even no OC m1k against grunts, and that hipster actually makes you worse against grunts than no OC at all. This claim is absolutely true on it’s own, but let’s put some numbers out there. I will include the usual modded build as well even though it neither is meant for this or is the comparison favorable.

232XX Hipster132XX no OC231XX ASS
Ammo198150104
Dmg Per Shot485565
Theoretical Total Dmg19,5048,2506,760

1. ignoring blowthrough, weakpoints, and armor breaking

WP = Hipfire weakpoint shot, HIP = Hipfire bodyshot, FCS = Focused bodyshot, FWP = Focused weakpoint shot

Grunt Breakpoints1WP+1HIP2 / 3HIP1WP / 2HIP(1FCS)1WP / 2HIP(1FCS)
% of Ammo1.01% / 1.5%0.67% / 1.3%0.96% / 1.9%
Theoretical Grunt Kills per Second3 (6 with WP) / 24 / 24 / 2

2. or just 1 WP shot if T4 WP damage is equipped; 0.5% ammo per kill
In theory WP Hipster can kill 198 grunts with WP shots, which is the best of them all, but this sacrifices the ability to take BT. If the no OC build takes BT it only needs to kill a second grunt per shot ~32% of the time to catch up in ammo efficiency.
As you can see, Hipster only really wins against typical modded builds which aren’t meant for grunts anyway. But what about veterans? Guards have 324 hp and Slashers have 177.6 hp.

Guard Breakpoints4WP / 7HIP3WP / 6HIP(3FCS)1FWP+1HIP / 2FCS+1HIP
% of Ammo2% / 3.5%2% / 4%2.9% / 4.8%
Slasher Breakpoints (177.6hp)2WP / 4HIP2WP / 4HIP1FWP / 1FCS+1HIP
% of Ammo1% / 2%1.3% / 2.6%1.9% / 2.8%

Interestingly you might note that Hipster is more favorable ammo economy for veterans than for regular grunts. Compared to the no OC grunt build, Hipster is winning except for the guard WP, where they're equal (technically no OC is winning a tiny bit because it’s 2.00% vs 2.02%).

Hipster DPS

Hipster has generally better or at least comparable burst DPS and total magazine damage to a typical build.

232XX Hipster231XX ASS
Burst DPS288188.7 FCS, 260 HIP
Mag Damage672585 FCS, 520 HIP

Non-hipster builds suffer a bit more when spamming hipfires due to recoil. At shorter ranges Hipster does a lot more damage than focus builds, and spamming hipfires on a focus build depletes your ammo pool a lot more for your gain compared to Hipster as I will get to later.

Total Damage

232XX Hipster has 9,504 total theoretical damage.

231XX ASS has 6,760 total damage; focus shots net you 7605 total damage.

Hipster has 24.9% more total damage capacity than focus ASS.
Notice how ASS has two numbers. In a very real sense the bigger number is your potential damage. Every time you focus shot you do 146.25 damage and the same is subtracted from the remaining total damage. When you hipfire with ASS you do 65 damage, but 73.125 damage is subtracted from your remaining damage because you lost out on the focus shot damage bonus you could have gotten from that ammo. So, even though in theory ASS can reach 260 DPS compared to Hipsters 288 DPS, ASS will lose 12.5% of it’s total damage potential by doing so. Thus, ASS is stuck with 188.7 DPS unless you are shooting small targets or absolutely need damage now.

Okay, but what if we factor in 1 ammo focus shots, we get one free hipfire for every mag that ASS depletes. ASS has 13 mags of ammo, so that’s 845 extra damage. Not bad at all. Added to the focus potential pool we get the highest potential of 8450 total damage, getting us up to 88.9% of Hipster’s ammo pool (or Hipster has 12.5% more). I’m not going to speak to the practicality of that, but hey, it is theoretically possible for someone to achieve that.

And why not, let’s do the same for our definitely-not-a-focus-build 232XX Hipster, which has 14.14 mags. That means 14 mags plus the last mag will have 2 bullets in it which still gives us a free 1 ammo focus shot. Since our build has no additional focus bonus that means it’s just 48 extra damage per bullet 15 times, or 720 extra damage. That brings us up to 10224 total damage. Compared to our theoretical ASS pool that puts Hipster at 20.9% more than ASS, or ASS is only 82.6% of Hipster’s ammo pool. Gotta say I expected ASS to pull ahead more in this particular comparison because of the small mag size and such.

But wait, there’s more! What if I pointlessly added focus Hipster 231XX into the fray, which has a total focus shot ammo pool of 10368, 9.1% more than Hipster’s regular ammo pool. With 192 ammo and 8 mag size it takes a whopping 24 mags to deplete this ammo pool, which means 24 free hipfires. That’s 1152 extra damage or 11520 total damage. That’s 12.7% more than 232XX Hipster’s theoretical max damage pool and 36.3% over ASS’s theoretical max damage pool.

TTK, or, The Examples Section

(Inside these parentheses you’ll find my approximate TTK in approximate seconds [I did this so you don’t have to] from starting to focus or the first hipfire to last enemy dead and,)

(the percentage of ammo consumed as read by ammo percent indicator on the hud of the example video)

Since the DPS of Hipster is much higher, many targets are theoretically much faster to kill with 232XX Hipster than with 231XX ASS, but when you take ranges into account, it’s rather variable based on the situation.

A H6p4 Menace takes 13 bullets from 232XX Hipster, or a full mag plus 1 hipfire from 231XX ASS (still only mag using the 1 bullet focus shot technique). Hipster can do this in 2.167 seconds in theory, but only at close ranges. Overall Hipster is fine or even better at closer ranges, but fails to perform as well against certain targets, usually tankier ones, at longer ranges.

232XX Hipster TTK232XX Hipster Ammo%231XX ASS TTK231XX ASS Ammo%
Menace (Close)3s7%4s8%
Menace (Far)6s , 8s310%, 7%5s8%
Web Spitters9s7%11s12%
Acid Spitters10s12%10s15%
Praetorian7s14%13s16%
Warden (Varying Ranges)5s, 5s, 3s, 2s49%, 8%, 7%, 6%3s7%
Shellback5s8%6s10%
Septic Spreader4s5%3s6%
Grabber (Ready to grab)52s4%2s4%
Grabber (Turns away first)4s7%2s5%
Mixed Group 1619s, 15s, 20s18%, 17%, 19%20s, ~25s, 17s19%, 26%, 18%
Mixed Group 215s, 19s, 23s, 17s15%, 19%, 18%, 16%23s, 27s, 19s18%, 25%, 20%
Grunts Only711s, 10s, 12s, 13s11%, 11%, 12%, 13%9s, 9s, 10s, 13s12%, 12%, 11%, 14%

3. slow firing to ensure single clip kill
4. 20m, 15m, 10m, 3m
5. Grabbers are pretty easy to nuke when you get them facing you, but it can be really tricky to land the WP if they turn away first. Both are clips where I landed a favorable WP shot, but I struggle to hit the WP even with ASS. Examples of making the grabber turn away first vs getting it while attempting to grab you. ASS is easily as fast or faster on both examples if you can hit 2 WP shots.
6. A little mixed group trial I did, 1 Praetorian and a handful of grunts. 2321_ Hipster and 2311_ ASS for more consistent BT value. Hipster rather consistently had a tighter grouping of ammo consumption varying only up to about ~4%, whereas ASS could be up to 8% variance. Kinda bugs me cause BT value can be so variable, but here’s an example anyway. The three following examples are at H5p4.
7. Yeah, against just grunts Hipster isn’t really better than regular m1k. Throw more mixed targets into the hoard though and you start to see Hipster pull ahead in TTK and in ammo efficiency, even if only by a little.

*Djinn included some comparisons with a no OC build. These didn't fit nicely in the previous table without a huge & nearly empty column, so they're here instead.

232XX Hipster TTK232XX Hipster Ammo%231XX ASS TTK231XX ASS Ammo%231XX No OC TTK
Trijaws4s8%4s8%5s
Spawn13s10%15s17%13s
Leech3s8%4s8%4s

Cryo Synergy

Cryo Bolts help immensely for certain targets at range that might become troublesome, specifically menaces, wardens, and spitballers. Paired with Cryo Bolts, 232XX Hipster regains almost all of its efficiency at dealing with these targets at range. 231XX ASS with Cryo Bolts for comparison as well. TTK starts when the bug freezes.

232XX Hipster TTK232XX Hipster Ammo%231XX ASS TTK231XX ASS Ammo%
Spitballer2s5%3s7%
Menace2s5%2s6%
Warden2s5%2s6%

Breakable Weak Points

There’s a fun bug, or interaction, whatever you want to call it, between the Armor Break mod in T2 and breakable weak points. TLDR, if you weave hipfires and focus shots you get more oomph from your focus shots without breaking the weak point as fast. For goobombers only Hipster and 13XXX builds can take advantage of this, but for bulks both see great benefit.

232XX Hipster TTK232XX Hipster Ammo%231XX ASS TTK231XX ASS Ammo%
Goo Bomber6s7%9s11%
Bulk38s42%38s44%
Bulk (No weaving)37s59%52s63%

An honorary mention for 231XX Hipster, a focus build which benefits particularly for both of these. Note the incredible ammo efficiency.

Goober https://youtu.be/ozOFu0nWlGg (TTK 8s) (Ammo 5%)

Bulk https://youtu.be/fSswA3G6VAE (TTK 48s) (Ammo 33%)

Summary-ish and Definitely Not my Personal Opinion

I can take any conclusion from this I want, but I’ll keep this on the short side as it is not the most important part of this whole thing. From what I personally can tell 2321X Hipster keeps up with 2311X ASS pretty well in TTK for the tests I have run here, until you make Hipster take out a target from 15 or more meters away, and at 20-25 meters and more I’ll just be using focus shots with Hipster if it needs to die that badly. At range Hipster can’t compete, it’s basically no OC focus M1k with more total ammo and a little lower focus shot damage. But, lucky me that Cryo Bolts exist to make tanky targets at a distance easy for Hipster to deal with again, though not as fast as you do have to wait for them to freeze first. At least once they’re frozen they stop shooting at you. I expected less out of ASS as far as ammo efficiency goes for all the mixed targets, but I suppose there isn’t as much damage waste as I thought there would be with its high damage focus shots. Hipster seems to come in consistently a tad under in ammo consumption when in optimal range, and definitely isn’t as bad against mixed grunts as you might think after seeing how bad it is both theoretically and practically at non-veteran grunts. The times when TTK difference was the most noticeable I think is when Hipster can take out 9-14 small targets in one mag whereas ASS has to reload to finish off the last 1-6. That, or when in close range against meaty targets like unimportant praetorians.

IMO, I wouldn’t say that Hipster needs a buff, but it most certainly doesn’t need a nerf considering how close the performance is to the most comparable ASS focus build within reasonable ranges. And that’s not really considering how much more aim intensive Hipster can be over focus builds for almost all use cases.


r/technicaldrg • • May 29 '22

build BUILD BREAKDOWN: Burning Hell (Gunner's Lead Storm) [MODDED: Haz6x2]

58 Upvotes

A Breakdown of Burning Hell

Gunner is a fairly straightforward class compared to the others, but he still has quite a few versatile and flexible builds in his arsenal. Arguably his most powerful weapon is the Lead Storm minigun, which can be built for simultaneous massive single target DPS and swarm clear with the confusingly named Lead Storm overclock. This post, however, will focus on a more aggressive playstyle: Burning Hell.

All numbers in this post are taken from the Equipment Terminal in-game.

TL;DR: 12223 or 32221 with Burning Hell are mostly your best options. Pair with Volatile Bullets for immense weakpoint damage and cluster grenades for a large on-demand area stun. I highly recommend the Weapon Heat Crosshair mod for any minigun build.

Why Burning Hell?

While Lead Storm (or LSLS) is a very powerful overclock, it requires exceptional positioning skill, decent aim, and is very unforgiving. Burning Hell is a much safer option, and if you can hit your Volatile Bullets shots, you don't lose out on much damage against chunky targets. Burning Hell also has arguably more swarm clear potential than LSLS due to its ability to ignite swarms much quicker and more easily, which allows fire spread to take effect faster.

Tier 1:

Our first options are Magnetic Refrigeration, which doubles the minigun's base cooling rate when not firing and reduces the cooling delay after the gun stops firing; Improved Motor, which increases fire rate by 4, to a total of 34 bullets per second (though the minigun's stats notoriously lie and the real firerate would only be 17); and Improved Platform Stability, which reduces the gun's base spread from 100% to 25%.

  • A faster cooling rate makes maintaining Hot Bullets output much easier, as you need to wait for a much shorter time before being able to tap-firing again without overheating.

  • Sadly, the increase in fire rate does not increase the heat produced by the minigun, which means you unfortunately cannot take advantage of either Hot Bullets or Aggressive Venting faster.

  • Increased accuracy is very valuable on any fully automatic weapon.

Take option 1 if you're choosing Hot Bullets on Tier 5; take option 3 if you're choosing Aggressive Venting on Tier 5.

Tier 2:

A somewhat boring tier, Oversized Drum adds 600 ammo to our pool, bumping us up to 3000, while High Velocity Rounds increases our damage per bullet by 2, for a total of 12. This is a personal choice, but it's important to note that Hot Bullets is affected by the damage upgrade; a fraction of your total damage is ADDED as heat damage (not converted), and thus you will heat enemies faster if you take the damage mod.

Take either option.

Tier 3:

Now we're getting to the good stuff. Hardened Rounds gives us 200% extra armor break, for a total of 300%. Improved Stun gives us 20% extra Stun chance, for a total of 40%. Blowthrough Rounds gives us one blowthrough penetration per bullet.

  • Armor break on a fully automatic weapon can be very useful, specifically against Shellbacks and Brundles. However, since Burning Hell has low base damage and relies largely on its fire sources to deal its full damage potential, this is not a great pick.

  • Stun helps make an already safe build even safer. It allows you to more reliably get up close to bugs when needed, and also helps ensure that you hit Volatile Bullets shots on targets with small weakpoints, such as Menaces or Wardens.

  • Blowthrough is good on a direct damage build, but again Burning Hell relies on its fire capabilities to do its damage. When playing close to the bugs, you will also typically not be at an angle to make full use of blowthrough.

While this is a personal choice, I strongly recommend option 2.

Tier 4:

Another interesting pick. Variable Chamber Pressure gives us a 15% damage boost when the gun is fully stabilized (in other words, when you have reached max fire rate). Lighter Barrel Assembly decreases the spinup time of the minigun from 0.7 to 0.3 seconds, and its opposite, Magnetic Bearings, increases the time the minigun stays spun up by 1 second.

  • A 15% damage boost is nice for optimal damage on a direct damage build, but as mentioned previously, Burning Hell gets much more use out of its fire and heat outputs. You will also almost never be taking advantage of this mod while using your fire cone, as you need to be tap-firing to avoid overheating.

  • Faster spinup helps this build immensely. First, you have a much more immediate reaction to danger and can stun it very quickly if you need to. Second, a faster spinup allows you to keep continually bringing up your fire cone more quickly, increasing your damage output at close range.

  • Honestly, I really don't know why Magnetic Bearings exists. You can manually tap-fire a couple shots to keep the weapon spun up, and the other two options on this tier blow it out of the water.

Take option 1 if you think you'll make good use of it, but I recommend taking option 2.

Tier 5:

The most drastic playstyle changes found on the minigun are in this tier. Aggressive Venting makes the gun explode when you overheat, producing large amounts of heat damage and Fear in a decent radius around you, while also reducing the recovery time from an overheat in half, to 5 seconds from 10. Cold as the Grave cools the minigun slightly whenever it kills an enemy. Hot Bullets adds 50% of your total damage to the weapon as heat damage.

  • Aggressive Venting is incredibly powerful in solo. Having an on-demand massive Fear bomb that also burns enemies and thus produces fire spread is an extremely safe playstyle. Combined with the quicker ignite that Burning Hell has, you can proc this incredibly quickly and quite often. However, this playstyle isn't as effective in a team, as enemies that are targeting a teammate instead of you will likely not get hit by the vent, and most classes will usually bring a better swarm clear option to the team, rendering AV redundant.

  • Cold as the Grave is a popular choice, but Burning Hell benefits very little from it, and loses out on a lot. I also don't believe that this mod procs when an enemy is killed from Burning Hell's fire cone, which is the largest portion of your damage.

  • Hot Bullets is optimal for team play. It provides quick long range ignition on enemies, which is powerful against Grunt packs because of fire spread, and is useful against tankier HVTS such as Wardens and Menaces that you can finish off with a Volatile Bullet shot or two.

Take option 1 if you're running solo or in a team that can ignite far targets for you. Take option 3 if you're in a team that you trust to deal with trash mobs so that you can focus on igniting targets for Volatile Bullets.

Secondary and Grenades:

As mentioned many times before, Volatile Bullets Bulldog synergizes exceptionally well with this build. It provides massive single target damage that you can easily take advantage of with Hot Bullets. If you're using Aggressive Venting while solo, I would recommend Elephant Rounds instead, as you won't be able to ignite far off targets easily (barring incendiary grenades.)

Cluster grenades and incendiary grenades are both competitive choices. Sticky grenades, IMO, don't do enough swarm clear on their own for them to be worth it, even with their Fear potential. Clusters can be used to wipe large groups of trash or as an on-demand large area stun button for Mactera. Incendiaries have similar swarm clear to clusters, but they trade the stun potential for an instant ignition source, which can be useful with Volatile Bullets.

Playstyle and Tips:

A Burning Hell Gunner needs to be on the ball with his Volatile Bullets shots. You need to be paying attention to what you and your teammates have ignited, are going to ignite, and which heavy hitting enemies are currently on the playing field. Proper shield placement has a high skill ceiling, but can be highly rewarding.

  • Play close, but not too close. Corral the swarm; don't jump into the middle of it.

  • If you have trash clearing teammates, such as a Sticky Fuel driller, save your ammo and use your fire cone for self defense against Naedocytes, rogue Swarmers, and small Grunt packs. Save the larger clumps for classes who can deal with them more efficiently.

  • Make use of both the cone and Hot Bullets, if you have it. You can b-hop and "dance" around slightly in front of a swarm to allow yourself to heat them with the cone while not getting bitten yourself. Pepper each enemy with a couple of shots and let the fire damage do the rest, rather than trying to kill them one by one.

  • If a large Mactera cloud appears, don't focus them down individually until they're dead. Attempt to stun them instead, and keep rotating shots between them. Focus on stunning Trijaws first, as Spawn and Brundles can be kited more easily.

  • Don't feel bad about wasting ammo on Grunts or walls while trying to get to Hot Bullets. The fire status effect and Volatile Bullets will usually make up for the lost damage.

  • This goes for any Gunner playstyle, but try to use shields proactively, rather than reactively. A team of 4 living dwarves can take advantage of a shield much more effectively than 3 dwarves trying to revive someone who died because there wasn't a shield down. Shield before you're overrun, rather than after.


r/technicaldrg • • Dec 06 '25

Scout's GK2 meta shakeups: the battle frenzy Coup and the fall of AISE

Thumbnail reddit.com
57 Upvotes

r/technicaldrg • • Sep 24 '22

build BUILD BREAKDOWN: Fire Bolt (Scout's Nishanka Boltshark X-80) [MODDED: Haz6x2]

56 Upvotes

(Short guide because I don't know what I'm doing, also this build is more effective in solo, as you would generally have Sticky Fuel in a team scenario to give you all the crowd control you need)

A Breakdown of Fire Bolt Boltshark

Scout has always had pretty weak crowd control, with most of it's weapons focusing towards single target damage. The Boltshark has a couple of interesting options that tremendously help with Scout's lack of crowd control, and with this overclock, this makes crowd control with Scout quite a lot easier, if you're somewhat good at kiting.

Why Fire Bolt

Well, as I stated previously, Scout has always been the weakest class for taking out large groups of weaker enemies like swarmers or shockers. Fire Bolt causes the normal bolt shots to apply heat damage to both the struck target and the area the bolt itself and both the direct and area heat damage is applied as a DoT effect. To top it all off, the DoT's stack with themselves and each other. The direct heat DoT deals roughly 2 heat damage every 0.1 seconds, for a total of 120 heat damage for the 6 seconds that the bolt lasts for, with the area heat DoT dealing the same damage for 5 seconds (100 damage total). This is great, as most small/normal size enemies will be ignited and killed when walking through the bolt, allowing for you to shoot one or two of them down and simply kiting bugs around it.

Reccomended build (by me at least) is 121X1

Tier 1:

The first tier of the Boltshark's modifications are three types of special bolts that can be interechanged for your primary bolts at any given time using 'r'. There is the pheromone bolt, which causes the bug struck by the bolt to be targetted by a maximum of 12 bugs and have its movement speed slowed to 70%. This works excellent on large bugs like praetorians or if you just need to take the aggro off of yourself. The next bolt is the chemical explosion bolt, which causes a poison DoT on the bug struck by the bolt. If the bug dies while still affected by the poison DoT it will explode, causing an explosion and dealing damage to nearby bugs. This explosion deals 140 poison damage in a 4m radius, fears bugs, breaks armour and stuns bugs for 1 second. This is a great crowd control tool that you can just stick to the grunt at the front of the pack, quickly kill, and just wait for it's comrads to walk straight into the explosion. Even if they don't all die, the fear, armour break and stun should help trememdously in taking them out. The third bolt is the taser bolt, which creates a beam of electricity when placed within a certain distance of one another, dealing damage to bugs walking through it. The taser bolts are also able to individually deal electric DoT to bugs close to it. The beam deals 6 electric damage every 0.2 seconds and slows bugs movement speed to 20%, whereas the proximity DoT deals 2 electric damage every 0.1 seconds and slows bug movement speed to 50%. All three bolts are usable, with taser bolts being the weakest in most scenarios. The chemical explosion bolt is harder than the pheromone bolt to use, but has very rewarding results if used correctly. However, the damage isn't as impressive in haz 6x2, as slashers and guards can most likely survive the explosion. This leaves us with pheromone bolts being the 'best bolt', mainly because how easy it is to use and how effective it is. It takes 13 bugs out on combat, which can easily give you enough breathing room to recover and take them all out. It's pretty much like a lure grenade, but the lure can fight back against the bugs. So pheromone is the winner in this tier.

Tier 2:

Damage is completely useless for the main bolt, as the fire bolt doesn't rely on the main bolt's damage to be useful, and you already get 9 pheromone bolts which should be more than enough. So ammo is the final option, and it's a very good pick, giving us more crowd control, and who doesn't want that with Scout?

Tier 3:

Faster reload is a no brainer, we don't need the increased velocity as we are never sniping things from across the cave, and the decreased reload speed is really useful for micromanaging your bolts during combat.

Tier 4:

This tier is a bit of a let down, with both of the options not really adding much to our build. Making our bolts retrievable from long range is pointless for fire bolts, as they cannot be retrived at all and sadly, killing an enemy with the fire bolt DoT doesn't give you the speed boost. Pheromone bolts can be retrieved, but if you're needing to retrieve them, you're missing shots, and why are you doing that? However, there is an exploit with bolt retrieval that allows you to replenish ammo, but I don’t know how it works and it’s really hard to setup in modded. So just pick whichever one you want.

Tier 5:

This tier seems like an easy pick, giving your pheromone bolts increased duration means that the bugs are aggroed for longer, giving you more time and all that jazz. And in reality, it's as simple as that, the fear chance of option 3 is only a 33% chance, which means it does nothing 66% of the time, also fearing the bugs away from the fire bolt defeats the whole point of using fire bolt in the first place (thanks GreyHound) and magnetic shafts is useless as well. So increased special bolt duration is the clear choice.

Primary and Grenades

Primary must be something with good single target damage, there are lots of options (but mainly M1K builds) like pretty much all M1K builds and like that's it (#M1K is my love) and all of scouts grenades are pretty good, with pheromone grenades being the favourite among many. cryo's can take out breeders and large clumps of mactera, ifg's are very good for holding chokepoints with a blowthrough M1K, and just slowing down bugs in general and pheromone grenades are a great panic button if you’re surrounded and synergise really well with fire bolts, as they keep the bugs grouped up while the fire bolt can do it’s thing, and the bugs attack each other too.

Playstyle and Tips:

Shoot fire bolt into ground, ground fire, lure bug into fire, bug get hot, bug die, happy dwarf. Generally if you have good movement with Scout, you should have a great time with this build. I'm not really the greatest for giving tips as I'm nowhere near the skill level of other more experienced players, but one thing I will say is to stay mobile. A static Scout is a dead Scout. Use your mobility to your advantage, use your tools such as Dash and grapple to get around the bugs and place them exactly where you want them. ShotgunCrocodile has a very good guide on basic modded movement, and you’ll need all of that plus more when using Scout. Also don't be afraid to shoot down multiple bolts, as their DoT's do stack with each other, allowing you to take out a mini swarm with just 3 or 4 of these bad boys (except for any bigger enemies of course). Djinneazam did a true solo run with ASS and Fire Bolt using pheromone bolts and pheromone grenades, which I think you should all watch because he demonstrates how to kite effectively and he uses T4B on the grappling hook, which gives you a temporary speed boost when you use the grappling hook, which helps tremendously for kiting.

Please let me know if I wasted my time with this.


r/technicaldrg • • Jun 13 '24

build Recommended builds for new OC's

55 Upvotes

Hi guys-

Excited to jump into s5 and the new build possibilities.

Doesn't have to be an indepth breakdown, but curious to know your build breakdowns for the new OC's.