r/tanks • • 11h ago

Modern Day 2S7M Malka 203mm tracked self propelled howitzer

Post image
44 Upvotes

r/tanks • • 1d ago

Modern Day Russian Armor Using Newspapers for Winter Camouflage

Thumbnail
gallery
538 Upvotes

Russian armor seen using newspapers for Winter camouflage in Belarus and Donbas, Ukraine

via English Russia


r/tanks • • 1d ago

Discussion Tell me the most unknown/niche tanks you know!!

Post image
102 Upvotes

Ill start the british M.R.V mine exploder it such a odd vehicle and there isnt a lot of stuff known about it still niche


r/tanks • • 1d ago

Misc Pictures from Military History museum in Sofia

Thumbnail
gallery
99 Upvotes

r/tanks • • 1d ago

Artwork The Char B40 : The missing link between the B1 Ter and the ARL 44

Thumbnail
gallery
41 Upvotes

Hi everyone, to those that allready saw my previous post on the ARL tracteur C, i now want to talk a little about my most favorite French paper tank of WW2. Even if not very well known, i want to cast light over this potentially formidable beast.

The Char B40 was a French heavy tank project developed between late 1939 and 1940, intended as the next evolution of the Char B1 family. Although it never progressed beyond the drawing board, it represented a considerable improvement over the B1 Ter, with better protection, a more powerful engine, wider tracks and, finally, a turret designed to accommodate two or more crew members.

A more powerful machine :

The B40 was designed around a widened hull, reaching just just under 3.10 metres in width as indicated by the SNCF requirements (French railway company). This was necessary not only to accommodate a significantly larger turret ring, increased from 1,280 mm to 1,680 mm, to accommodate wider tracks, but also to make it possible to transport by railway.

Its tracks were widened from 50 to 60 cm, allowing the vehicle's considerable weight to be distributed over a larger contact area. Combined with a new oleo-pneumatic suspension, this was intended to improve its mobility and reduce the strain placed on the running gear.

Perhaps the most impressive improvement was its engine. The B40 was intended to receive a 500 hp turbocharged Talbot engine, a substantial upgrade over the 307 hp engine used in the B1 Bis and 350 hp of the B1 Ter. Despite its increased weight, this would have given the B40 a considerably better power-to-weight ratio than its predecessors.

Its transmission was equally interesting. It featured six forward gears and six reverse gears, with the latter made possible by an inversion mechanism. This meant that the B40 could theoretically travel just as fast backwards as forwards, an unusual characteristic for a tank of this period and potentially useful when withdrawing from combat.

The vehicle was also expected to carry 1,500 litres of fuel, three times the capacity of the B1 Ter, giving it a considerably greater operational range.

Armament and turret development :

The original B40 configuration was intended to retain the hull-mounted 75 mm gun while replacing the B1 Ter's single-man turret with a considerably larger two-man turret. This would have been armed with a more powerful 47 mm anti-tank gun, either the 47 mm modèle 1934 RF or the 47 mm SA 37.

However, following combat experience during the Battle of France, a revised configuration was considered in late May 1940. The traditional arrangement of a hull-mounted 75 mm gun and a turret-mounted 47 mm gun had revealed several limitations.

ARL engineers therefore proposed fitting the B40 with the ARL 4 turret, originally designed for the ARL Tracteur C. This turret mounted a 75 mm gun, allowing the vehicle to engage both armoured targets and infantry without relying on two separate main weapons.

This configuration could also dispense with the hull-mounted 75 mm gun, simplifying the driver's responsibilities and potentially freeing up valuable internal space.

My B40 reconstruction project

Since no complete plans or confirmed photographs of the B40 have survived, its actual appearance remains largely unknown. The vehicle never reached the prototype stage, and its precise configuration can only be partially reconstructed from surviving technical information.

For this project, I've decided to explore several possible interpretations of the B40, combining its documented characteristics with turrets from other contemporary French tank projects.

The models currently include:

  • B40 ARL 2: An enlarged ARL 2-style turret, adapted to accommodate a two-man crew.

  • B40 FCM tourelle de 47 mm: The B40 FCM configuration deserves a small historical consideration. During the development of these models, Elan Vital, also known as BOUGNAS in some community, an enthusiast and dedicated archival researcher, pointed out a possible connection between the B40 and the FCM 40-tonne project. If such a relationship existed, it could potentially provide some historical context for the use of an FCM F1-derived turret specifically for the B40.

  • B40 ARL 4: ( around May 40)The later proposed configuration with a turret-mounted 75 mm gun.

  • B40 Renault-Balland: An alternative configuration using the G1R turret.

  • B40 ARL 1: An earlier turret design inspired by the ARL 37 project.

  • B40 FCM F4: An alternative interpretation featuring a turret from the FCM F4 project (which at one point i too will make a post about).

Additional armament experiments

I've also experimented with several alternative armament options for the hull. For the hull-mounted gun configurations, I wanted to explore weapons that could have been considered as potential upgrades, including armaments already proposed for the earlier 1937 Char de 45 tonnes project, such as the 75 mm APX and the 105 mm Schneider Mle 1913. These would have offered considerably greater firepower compared to the original 75 mm SA 35.

For the B40 configurations equipped with a turret-mounted 75 mm gun, I still wanted to retain some form of hull armament. I've therefore added a ball-mounted weapon, available as either a single machine gun, twin machine guns or a flamethrower. These are entirely hypothetical options, with no confirmed historical evidence of their consideration for the B40.

As for the turrets themselves, I also wanted to explore potential upgrades in armament, provided that the available internal space would have allowed their installation. For example, both the ARL 4 and FCM F4 turret configurations can be equipped with the 90 mm CA mle 1939, a gun originally intended for the Char de Forteresse programme.

The FCM F4 turret received a little more creative freedom. For this particular configuration, I added several fictional armament options simply for the fun of exploring different possibilities. These include a twin 47 mm gun arrangement, several different 75 mm guns, and even the 105 mm Schneider Mle 1913, which was actually proposed for the original FCM F4 project.

Of course, these armament combinations should be understood as experimental interpretations rather than documented B40 configurations.

A small historical disclaimer: Not all these configurations are historically documented. The enlarged ARL 2-style turret and the ARL 4 configuration are based on historical information and proposals, while the FCM, Renault-Balland, ARL 1 and FCM F4 combinations are speculative artistic reconstructions.

The models are designed for 1:100 scale printing, compatible with both FDM and SLA printers, and can be enlarged for other scales.

I would also like to thank the Tank Encyclopedia community for its help and contributions to this project!

What do you think? Would the B40 have been a worthwhile evolution of the B1 family, or was the French Army already moving in the wrong direction with this design? And what are your thoughts about my models ?


r/tanks • • 1d ago

Artwork Finally got around the finishing this drawing from a few months ago

Thumbnail
gallery
33 Upvotes

It was a “what if” e-series tanks continued development type of thing.


r/tanks • • 1d ago

Artwork Burming of historical propaganda: Panther

29 Upvotes

Check my other pieces out on insta, Surpluswoods
( I’m begging bc I have no followers )


r/tanks • • 1d ago

WW2 Type 4 Ho-Ro self-propelled gun from American Heritage Museum collection in Stow, Massachusetts.

Post image
40 Upvotes

r/tanks • • 1d ago

Artwork Gorgia 1C

Post image
2 Upvotes

Cannon Performance Royal Cannon Mk.3

  • Caliber: 120 mm

  • Propellant Length: 733 mm

  • Muzzle Velocity: 789.5 m/s

  • Penetration: 270 mm

  • Dispersion / 1000m: 11.0 mm

  • Bore Length: 6.88 m


r/tanks • • 2d ago

Modern Day 1/72 Scale Shturm Robotic Tank 125/152mm Gun 12x RPO-A Rocket

Thumbnail
gallery
8 Upvotes

r/tanks • • 2d ago

Discussion 105mm APFSDS i think

Post image
53 Upvotes

The jealous part is for my friends, im lazy to remove it


r/tanks • • 2d ago

Misc I love a baby poop brown paint scheme

Thumbnail
gallery
107 Upvotes

Anyone with me on this?


r/tanks • • 3d ago

Modern Day Kurdish Improvised Tanks

Thumbnail
gallery
147 Upvotes

Kurdish improvised tanks used while battling ISIS.


r/tanks • • 2d ago

Artwork Landkreuzer P. 1000 Ratte

Post image
12 Upvotes

I had thought about drawing it someday, and now the opportunity has presented itself.


r/tanks • • 3d ago

Artwork Desert KV-2 (OC)

Post image
32 Upvotes

Please don't murder me its fictional friday.

I love the KV-2, i love this brick, though drawing it was hell. This KV-2 is from the fictional country of Dehnaaji (that i made up for this character).


r/tanks • • 3d ago

WW2 Some interesting vehicles armed with the 50mm Pak 38 (or a KwK adaption of it). Can you name all of them?

Thumbnail gallery
20 Upvotes

I just publised a vehicle about the Pak 38, featuring a Yugoslag example in our museum brought to Belgium during the Kosovo war. When researching this video, I came across an interesting range of vehicles using this anti tank gun, either directly installing the cannon on the vehicle or a derived tank gun variation of it. Can you name all of them?


r/tanks • • 2d ago

Fictional Friday Superior Sci-fi tank in your opinion? (Warhammer 40k) Leman Russ Tank or Scorpion tank (Halo)?

Thumbnail
gallery
0 Upvotes

I'm not just talking purely about Fire power and durability! Doesn't have to be strictly the ones I've mentioned it's just a few suggestions:

  • Logistics wise how difficult it is to transport the tanks?

  • How Reliable is it while in the battlefield?

  • Ease of use on using the tank and How comfortable it is for the crew?

  • How many Variants does it have and are they any useful or even good?


r/tanks • • 3d ago

Question What even is the point of the coaxial machince guns on vehicles with autocannons.

22 Upvotes

I get why it's useful on a tank; in the time it takes to reload, you want to keep infantry suppressed. But on something like an IFV, you have an autocannon that can fire continuously while having an explosive effect or punching through cover, depending on the round used. An additional machine gun that can only fire at whatever the autocannon was already shooting at just seems like a waste of space, money, and logistical capacity,


r/tanks • • 4d ago

Discussion Keilförmige Zusatzpanzerung

Thumbnail
gallery
60 Upvotes

r/tanks • • 4d ago

Artwork Improvement suggestions

Post image
15 Upvotes

r/tanks • • 4d ago

Question Three "Rybinsky Bronekhod" tanks on a combat mission. Project ATGM news and a very important question for everyone!

Post image
4 Upvotes

Greetings! This is my third post in this sub, and if you don't mind, today I'd like to share a fresh update on Project ATGM with you.

To start off, this game is a very large-scale project that can't be built all at once (otherwise, you'd have to wait several years for the release). That's why I decided to split development into three seasons, each dedicated to a specific era of armored warfare. As you might have guessed, the first season will focus on World War I. That is what I'm currently working on.

Although France, the United Kingdom, and Germany will have the largest tech trees, the Russian Empire won't be left out. One of my personal favorites among its armored vehicles is the "Rybinsky Bronekhod" — a medium tank project designed by the "Russky Renault" plant in 1916. While some surviving documents confirm its existence, the exact appearance of this vehicle remains unverified. For my reconstruction, I used blueprints featured in the book «Tanks» by Soviet researcher V. Mostovenko.

As for the historically documented specs: the tank is armed with a powerful 75mm Canet naval gun mounted on a Holt tractor chassis, weighing 12 tons with a top speed of 12 km/h. Its secondary armament consists of a Model 1914 Hotchkiss machine gun.

And one more thing — I have a question for you, friends! Could you recommend what other subreddits I should check out to share my project and find some support? Honestly, I'm currently developing the game completely solo while also being a student. It's really tough, and I would be super grateful if anyone could offer help in any form!


r/tanks • • 4d ago

Question Sherman Exhaust Specifications

5 Upvotes

Does anyone happen to know the type of steel, hole diameter and wall thickness of the m4a3 shermans (ford gaa v8 engine) exhaust pipes?


r/tanks • • 5d ago

WW1 A column of German Ehrhardt E-V/4 armored cars — a new in-game screenshot from the Project ATGM

Post image
7 Upvotes

Hey everyone!

Thank you so much for the warm welcome and awesome feedback on my first post! Since you enjoyed seeing early armored cars in action, I wanted to share a new in-game screenshot from Project ATGM — this time featuring a column of Ehrhardt E-V/4 armored cars.

A bit of history behind this beast:

Developed in 1917, the Ehrhardt E-V/4 was arguably one of the most capable and reliable German armored cars of the Great War. Weighing around 9 tons, it featured a full-wheel drive (4x4) system, which gave it surprisingly good off-road mobility for that era — something you really feel when driving it through rough terrain in-game.

It was armed with three 7.92mm MG 08 machine guns (with up to six mounting positions to swap between) and carried a massive crew of 8 to 9 men. While only a few dozen were ever built, they saw extensive service not only on the Eastern Front during WW1, but also in the chaotic post-war street fighting in Germany during the early 1920s.

Modeling the complex angles of its hull and getting the suspension to behave properly on uneven ground was a really fun challenge.

What do you think of how the column looks? And are there any other WW1 or interwar armored cars you’d love to see modeled next?


r/tanks • • 6d ago

Tank Design 1/72 Kitbash: Swedish Strv 123A Turret on A7V "Wasp" Chassis - Fully Painted Finished

Thumbnail gallery
38 Upvotes