r/synthdiy • • 7h ago

Amyboard Issue- Hiss separate from the actual note

3 Upvotes

Hey guys, I'm working on an amyboard module rn and no matter what I do, there seems to be a hiss and clamping filter sound when a note is played and released. I thought this was from my sloppy work, but I went back and it shows up when I load the sketches from amyboard online too.
I think its some sort of noise reduction in the signal path, but I can't find anyone else with the same complaints.

any ideas?


r/synthdiy • • 12h ago

First Drummatic demo made on the new interface, and the hardware is almost here

3 Upvotes

r/synthdiy • • 17h ago

components I need to find an effective way to connect cables to these connectors.After 11 months trying I am ready to shoot myself!

Post image
3 Upvotes

I don't even have the patience to explain myself!
After 11 months I'm just keep changing my design and fail after fail after fail.
I need to know in what way I can effectively put an 8pin bus cable on those stupid connectors.

I can't deal with these tiny off the self cables anymore!!!
They are flying everywhere!

My original post is here
https://www.reddit.com/r/synthdiy/comments/1s3fxax/advice_on_working_with_fpcidcbusribbonflex_cables/

English is not my first language so I may not understood effectively some of the answers and also I was trying to source my components locally where I can't find everything I need.

Thank you for your understanding!


r/synthdiy • • 19h ago

is there such thing as a synthesizer with 12 oscillators for each note?

12 Upvotes

to be a little more accurate, instead of being divide down, it has only 12 oscillators that play each note, but only one octave at a time. so if i had a 37 key keyboard, it would have 1 oscillator for A3, A4, and A5, another for A#3, A#4, and A#5, one for B3, B4, B5 etc. has that ever been done before? because then you could kind of get the best of both monophonic synths and polyphonic synths. like how in lucky man, in the solo, it kind of glides from a lower note to a higher note.


r/synthdiy • • 22h ago

DIY Keyboard Synthesizer & Sampler

194 Upvotes

I made a pair of keyboards for my music duo! They have a phase distortion synthesis and sampling engine, and a touch strip too.

The keybeds are actually taken from two old Arturia Keysteps, connected directly to an MCU that then sends all the UI controls over to a RPi 5 that is doing all the rest.


r/synthdiy • • 22h ago

B.Y.O.Battery - Noise Toys; Hacking and Circuit Bending Workshop - The Anteroom, Dunedin - 2016

Thumbnail
youtu.be
1 Upvotes

r/synthdiy • • 23h ago

workshop i'm hosting a free in-person event in berlin where you can try LABOR, KONSTRUKT-8, my upcoming DIY reverb, and chat with me about circuit design!

150 Upvotes

hey all,

moritz here. like the title says, i'm hosting a circuit design event at fitzroy here in berlin on the 21st of november.

we'll have multiple workstations where you can try LABOR in different scenarios (as a sequencer for a eurorack system, as a send effect for an ableton project, or as a blank slate where you can build your own circuit), play KONSTRUKT-8 via fitzroy's sound system, or just chat with me about your DIY projects.

there will be artists doing live performances on KONSTRUKT-8, and i'll give a couple circuit design talks.

you'll also be able to try my new, unreleased DIY reverb module – and we're doing a raffle where you can win an assembled KONSTRUKT-8!

the event is free, but you need to RSVP here: https://ra.co/events/2564131

hope to see you there!


r/synthdiy • • 1d ago

Synthesiser building workshop, London, next Saturday (21st)

Post image
17 Upvotes

r/synthdiy • • 1d ago

video The poor man's M8

0 Upvotes

r/synthdiy • • 1d ago

modular Sallen-Key Resonant Low-Pass Gate

Thumbnail
gallery
63 Upvotes

r/synthdiy • • 1d ago

4U Serge'ish modular build

Thumbnail
gallery
118 Upvotes

r/synthdiy • • 1d ago

modular How To Build a Modular Case for Under $200

Thumbnail
bluelanternstore.com
16 Upvotes

I found a really great guide for how to build a modular case out of hardware store parts.

There's also links to a bunch of open source modules you can make yourself to fill it with.

Full disclosure: I found this guide because I was revamping the site so if the css looks familiar, it's because I can only code in neon.


r/synthdiy • • 2d ago

Testing the separate outputs – here’s a first demo track

2 Upvotes

r/synthdiy • • 2d ago

video couldnt find whta i wanted so i built

Thumbnail
youtu.be
24 Upvotes

I couldnt find the eurorack moduels that felt right while playing with them so I've started building own... turns out it can be a deeper rabit hole then buying them straight off the shelf, the 4 drone oscilater id built using a teensy 4.1 ive had lying around for sometime. the octopus is a eucklidian sequincer made using an arduino mega and the one to the right of it is just a drum module build using an esp32, the mixer up to the right is a board off of ali express i remade into a eurorack compatible format.


r/synthdiy • • 2d ago

Homemade Trautonium

5 Upvotes

Hey everyone, I recently saw a video of someone playing a Trautonium online and I completely fell in love with the sound.

I then saw the price of one and became quite viscerally upset.

I have absolutely no skill in electronics but I have always been interested in getting into it. I was wondering if as a first project if it would be possible to build one from scratch and I was looking for some advice.

Ideally I would be able to use it as both a midi controller and a standalone synthesiser so I can use it for making weird stuff and to use as a controller for string presets.

If anyone had any advice at all I would really appreciate it :)


r/synthdiy • • 2d ago

£5 case from the local market

Post image
11 Upvotes

r/synthdiy • • 2d ago

I built a multisampler for the Raspberry Pi Zero 2 W with a Pirate Audio HAT

Thumbnail
gallery
24 Upvotes

A few months ago, I was looking for the perfect multisampler/rompler and gave SamplerBox a try. After using it for a while, I found myself wanting two things: a full ADSR envelope and an easier way to swap out samples while I was playing. So I used AI to help me build Pirate Sampler for my Raspberry Pi Zero 2 W with a Pirate Audio HAT.

I can upload samples through a web interface, play them from my MIDI keyboard, and tweak the envelope while listening to the result. The HAT’s display and buttons let me browse patches, load them, and mark my favorites right on the device.

More info and download here


r/synthdiy • • 2d ago

10hp FM/AM Radio Eurorack module.

72 Upvotes

Dear Community,

I built a small FM Radio for myself in the Eurorack format. It has an integrated speaker amplifier, headphone output and jumpers on the back to allow for standalone or Eurorack usage.

The firmware is from the ATS-20 project. The entire project (Kicad, gerbers, BOM, schematic etc) is open source and can be found in my github repository: https://github.com/Fihdi/ATS-20-Eurorack


r/synthdiy • • 2d ago

My friend Yukes just released a documentary about Tian Jinqin, you could think of him like China's Bob Moog, but his designs take inspiration from Chinese folk instruments and have a strong emphasis on expressive interfaces

Thumbnail
youtu.be
47 Upvotes

My friend just released his documentary on this man Tian Jinqin, this incredible Chinese synth inventor. I got an early viewing. His journey started when he couldn’t afford a guzheng so he tried making an electric one. He has such a unique perspective and emphasis on expressiveness because he draws from Chinese instruments. Also he’s such a kind and creative soul. My new hero. Get comfortable and take a look!


r/synthdiy • • 2d ago

Ave mod 3.0 modified video enhancer

3 Upvotes

r/synthdiy • • 2d ago

workshop Physical AMSynth build...

Post image
13 Upvotes

So I am going to attempt to build a Physical AMSynth synthesizer with a Raspberry Pi, an Arduino, and a USB Sound card sandwiched between 2 pieces of wood on risers. I even have a friend with a laser engraver for making the faceplate.

I want to base the look off of the image above. Once I get all the potentiometers and switches ordered, I figured I'd just carve out a rough template using cardboard then design the faceplate on my computer using those measurements.

I'm mostly just looking for some advice/tips as, while I am not new to soldering, Linux, or coding Arduinos and the like, this would still be the biggest DIY electronics project I have done yet.

Is there anything I ought to consider during this build?

Is there a recommended method for soldering up this many switches/potentiometers?

Anybody got a cheap USB Sound card they'd recommend?

I'm thinking of using a Teensy 4.1 with multiplexers. Any issues there?

Any advice is appreciated!


r/synthdiy • • 3d ago

Relaxation LFO

6 Upvotes

I've been working on basic Minimoog-esque synth using mostly schematics from Moritz Klein. Just added a LFO (Relaxation LFO by synthnerd), couldn't be happier with the results!


r/synthdiy • • 3d ago

my first attempt at frequency division

Post image
12 Upvotes

my whole experiment came down to this, you can use an astable multivibrator as a toggle circuit, idk where i heard about that being the case, but i tried it anyway. turns out, it works. but it gave me this goofy waveform from a square wave.