r/suspension • • Aug 26 '26

Would suspension work (little over a year ago)have caused this?

Post image
0 Upvotes

I had the cv axle, and upper and lower ball joints worked on over a year ago. I don’t want to take it into the who’s to blame territory unless it is an issue caused by the shop. Today- driving down the road and bam the tire came off and lodged under the car for 100 yards. I feel very lucky as I just got off the highway doing 75 mph. Also it wedged in a way that the car was supported and kept the front of the car from being trashed.


r/suspension • • May 15 '21

mountainbike Mondraker MIND Suspension Telemetry System Simplifies all the Settings, adds Anti-Theft Tracking

Thumbnail
singletracks.com
0 Upvotes

r/suspension • • May 15 '21

mountainbike Suspension Setup Using Telemetry | Santa Cruz V10 Suspension Tuning

Thumbnail
youtube.com
0 Upvotes

r/suspension • • Jan 09 '25

automotive Big brained rearward upper link 4-link setup on a 2000 taco

Thumbnail
gallery
0 Upvotes

I’ve never seen this kind of setup anywhere but I thought it’s just so simple yet you get to keep the frame and the positions of the fuel tank and exhaust. This seems like a very achievable 4 link setup it’s just so cool. I’ve been trying to find the name of this setup but I have yet to see any photos of something similar online or in forums, any thoughts? Photo credits go to Mr. T Garcia


r/suspension • • Jul 20 '21

automotive How Strutmasters’ New Line of EZ Struts Saves You Time and Money

Thumbnail
strutmasters.com
0 Upvotes

r/suspension • • May 15 '21

automotive Watch Bose's incredible electromagnetic car suspension system in action

Thumbnail
youtube.com
2 Upvotes

r/suspension • • May 13 '21

general suspension tech Suspension breakdown using a caster wheel

Post image
4 Upvotes

r/suspension • • May 13 '21

sportbike Might be the most expensive front end ever on a street bike.

Post image
4 Upvotes

r/suspension • • May 10 '25

quadbike/atv How bad are they 1-10, 10 being worst.

0 Upvotes

I'm still putting them back on for the time being, but these are pretty bad lol. Front has air pocket, and rear didn't even return after compressed.


r/suspension • • Aug 28 '26

Cv axle grinding

0 Upvotes

Recently replaced cv axles and the passenger spins smoothly while the drivers side spins rough almost grinding. Ive take everything apart and cant find anything wrong. Spun the tires with the car in the air and the drivers is rough with a slight clank sound anyone know what this could be? Did I just get a bad axle out of the box?


r/suspension • • 2d ago

Need my drivers license back

Thumbnail reddit.com
0 Upvotes

r/suspension • • May 13 '21

general suspension tech Home Made Motorcycle Suspension Travel Data Logger Measurement Transducer Linear Potentiometer

Thumbnail
youtube.com
1 Upvotes

r/suspension • • May 13 '21

roadbike All New Pinarello Dogma FS | Team Sky's Full Suspension Road Bike For Paris - Roubaix

Thumbnail
youtube.com
1 Upvotes

r/suspension • • Nov 17 '25

I made customizable camber suspension

Thumbnail
gallery
3 Upvotes

I made customizable camber suspension that I've never seen before in any car brand.

I’ve been experimenting with custom suspension mechanics and created a system that I haven’t seen in any real car. It uses three shocks and a set of hinge joints to control camber and absorb impacts without bending anything.

Here’s how it works:

  1. Front shock absorber (wheel shock)

This one sits at the wheel and works like a normal suspension. It absorbs vertical impacts and keeps the wheel stable.

2) Two camber shocks (upper and lower)

Behind the wheel, the system has two separate shocks that directly control the camber angle:

If the upper shock is compressed → the wheel tilts into negative camber (-)

If the lower shock is compressed → the wheel tilts into positive camber (+)

This means camber isn’t fixed — camber itself is actively adjustable and also has its own suspension.

3) Rear shock absorber (structure shock)

Behind the camber mechanism, there is a third shock that supports the entire suspension structure.

It absorbs:

strong hits,

movement from camber shocks,

and the motion of the whole system.

4) Everything works through hinges

Nothing bends. All parts rotate around hinge joints, so the geometry stays correct and nothing breaks even under extreme angles or low ride height.

Why it’s different

In real vehicles, camber is rigid. If you hit something, the arms bend or alignment is ruined.

In my design:

camber is suspended,

impacts are absorbed on three levels,

the whole structure can flex safely,

and the system can go extremely low without damage.

Basically: the wheel has a suspension, the camber has a suspension, and the entire suspension also has a suspension.


r/suspension • • Jul 11 '21

automotive Anyone remember torsion bar suspension?

Thumbnail
youtube.com
3 Upvotes

r/suspension • • Sep 30 '24

Coilover with no reservoir convert??

Post image
3 Upvotes

Hey everyone I bought fox 2.5 coilover factory series without a remote and was wondering if there is a way to add a remote reservoir to it? Or if fox even sells spare remote reservoirs I'm not really sure. Let me know guys thanks


r/suspension • • May 21 '21

OHLINS Controlled shock cavitation!

Thumbnail
youtube.com
4 Upvotes

r/suspension • • Jul 05 '21

automotive How do I fix this? I don’t even know if this is the right sub but I need advice on how I can fix the bent bracket, is it easy and/ or cost effective, or should I scrap the car even though it drives beautifully before. (95 camaro)

Post image
5 Upvotes

r/suspension • • Jul 14 '25

Suggestions?

Thumbnail
gallery
6 Upvotes

I would like to have amazing control on those washboard roads, feel like the bumbp never existed, and remove front sag, and not slide on the dirt road. What should I change without having to weld anything.


r/suspension • • Oct 18 '25

Question about bags?

Thumbnail gallery
2 Upvotes

r/suspension • • May 10 '25

automotive Camber/ caster bushing question

Post image
2 Upvotes

I recently bought a 3 inch leveling kit for my truck and planned of buying camber/caster bushing to do alignment after but I have no idea what to buy. Some bushing have negative and some have positive camber and I’m just not sure what I need to buy


r/suspension • • Dec 03 '25

👋 Welcome to r/AskSuspension — start by introducing yourself and exploring the community intro!

Thumbnail reddit.com
3 Upvotes

r/suspension • • Apr 05 '25

How to tell which side goes where?

Thumbnail
gallery
5 Upvotes

I bought a used set of T-Demand coilovers for my Lexus LS430 but there are no markings or labels for which side is left and right. I know the front from the rears but as to which goes on driver and passenger is unclear.

Does anyone know how to identify which goes where when they’re not labeled?


r/suspension • • Jul 15 '26

What is the part thats causing this noise?

2 Upvotes

This noise has gotten a little louder over the last month, the boots seem to be in good condition still
2023 gmc sierra


r/suspension • • Sep 18 '25

brainstorm help needed

2 Upvotes

I'm working on a project i am calling forever E-trike and i have the system put together to make it move but id like help or someone to bounce ideas off for a suspension