r/suppressors • • Aug 02 '26

Hero that engaged the Idaho shooter

Post image
607 Upvotes

what can yall think he was rockin?


r/suppressors • • Aug 13 '26

List of suppressor legality by state after Form 4 is no longer federally required

Post image
403 Upvotes

Photo provided by Silencer Shop on their YouTube channel


r/suppressors • • Jun 29 '25

Yhm fat cat review

Post image
348 Upvotes

Fat cat on my 11.5 budget build . Gun is a aero lower , timney flat alpha trigger , psa Midwest hg , centurion barrel, Odin works adj block , dfc grip , maxim brace , colt bcg, hc1 light , exps2 on unity . . So far I'm 400+ rounds in and it's a okay can . For its size it performs well. Sound mitigation is marginal , flash mitigation is good , not overly gassy unless your mag dumping . My cgs with ported front cap is quieter . I picked it for overall size and if middle of the road suite you you this is for you . I wanted to keep this build short and fast for close quarters tactical training .the lahar k is honestly a better can but longer . I'd buy it again as yhm has awesome warranty and customer service which aero is lacking in as of lately


r/suppressors • • Aug 16 '26

$10 3D PRINTED SUPPRESSOR

327 Upvotes

The video shows off my 3d printed MP5 and model FTN4 PCC Flow Can. All in, including the printer, you can start 3d printing your own suppressors in carbon fiber nylon for around $500. This can alone was about $6 in filament and $4 for the thread adapter. Polymer is the future. The future is now. (THIS IS NOT LEGAL ADVICE)


r/suppressors • • Aug 14 '26

found 1 shop locally willing to do 4473 transfers, walked out with 3 cans (L-R banish 22K-v2, gemtech TREK, polo 30 cal)

Post image
286 Upvotes

r/suppressors • • Sep 20 '25

PSA: properly mount your cans!

277 Upvotes

I was shooting my ar with a velos 556k suppressor. Next lane must have not properly mounted down their suppressor. He said he just got it last month and fired one round through. Its a surefire that went flying.


r/suppressors • • Jan 11 '26

Plan B Brake Test and Comparison

Thumbnail
gallery
271 Upvotes

I’ve seen a few various comments on Reddit that nobody’s done any good quantitative brake testing.  My buddies and I were talking about this over a few beers and figured we'd see what we could come up with.  We looked at past attempts for reference, and we didn't want to just measure how far it slides across a table (risk of variation and hard to repeat), and we didn't see anyone pull the trigger in a way that wouldn't put rearward force on the firearm (hard to separate that force from the recoil force).  We came up with a pendulum design and attached a solenoid to actuate the trigger without imparting any external forces, and it worked really well.  I was only able to post GIFs, so I’ll look at other ways to post the actual videos if these don’t show well.  I have videos of everything but I’m just posting a few that show key differences.

Test Method:

  1. An AR chambered in 5.56 with a 10.5" barrel and a standard carbine buffer/spring was used.

  2. Single round was loaded, and the magazine was removed. This gave a consistent cycle for all tests without any variation of cycling a dummy round or locking back on an empty mag.

  3. 1 round was fired and video captured the motion induced by the recoil impulse.

  4. Recoil was quantified by measuring the peak height change from rest. Any force, energy, etc. from firing the round is ultimately translated to rearward velocity. Velocity gets translated into height in the pendulum, and peak height differences showed the performance difference between the various brakes.  Note that I used a 1 cm grid behind the pendulum, and for this test I basically saw that starting point was a bit below one line and I went frame by frame to find the peak.  I felt that I had enough precision to take data in increments of 0.25 units, which seemed to be sufficient to quantify the differences between the various brakes.

Conclusions:

  1. Bore size matters. Brakes with tighter bores generally performed better than those with more open bores. A great apples-to-apples comparison is the Comstock Armory compact brake in both 22 cal and 9mm that seem to be otherwise identical. The 22 cal brake topped the group with 68% recoil reduction, and the 9mm was 44%. The Kaw Valley Precision brake has a 50 cal bore, and provided very little braking performance at just 16%.

  2. Brakes with ports all around generally did better than just side only venting brakes. Even with Rearden's appropriate 22 cal bore size, the side-only venting SPB and RPB were just 56% and 52% compared to the Comstock 22 cal at 68% reduction. The LPM Liberty Bell performed well (64%) with brake ports all round, which seems to compensate for it’s somewhat larger 30 cal bore.  PWS and KVP both performed poorly despite having ports all around, largely due to other poor design choices/priorities.

  3. Q Cherry Bomb’s small brake ports all around didn’t seem to help improve actual breaking performance, and this performed worse than the other styles of normal brakes.

  4. PWS and Kaw valley both performed significantly worse than others, presumably due to an unfortunate combination of poorly designed brake ports with an over-bored center.

This shows an interesting spectrum with the Cherry Bomb on one end with small ports all around, and the Rearden and Revival Defense/FCD brakes on the other end with larger ports that are side-venting only.  The Comstock MBC and the LPM Liberty Bell seem to be more in a sweet spot in the middle with medium sized ports venting all around the brake.

I have a strong preference for brakes that don’t need to be timed, and I’ve always felt that brakes that have ports all around were better at distributing the blast better than side-only vented brakes, and this certainly seems to validate that line of thinking.  Even with the lighter weight and shorter length, the Comstock Armory 22 cal brake surprised me with how much of a difference this actually makes.

Fitment Concerns:

The PWS and KVP brakes both seemed to have some fitment concerns. 

  • The PWS brake felt unusually snug on the barrel.  The minor diameter of the threads measured the same as the others, but I suspect the threads weren’t cut as deep as the others (which all felt the same when threading onto the barrel).

  • The KVP brake felt unusually snug when I put suppressors on with multiple Rearden Atlas and Comstock LPA adapters.  The major diameter of the threads measured a bit over 0.9” on the KVP, and all of the other brakes measured a bit under 0.9”.  My friend has a Diligent Zilch on one of his suppressors, and it would not fit on the KVP brake.

I know there’s no established Plan B thread specification, so it’s hard to tell if PWS and KVP have poor quality control, or maybe they have systems to check and they just thought it was good enough.  Regardless, considering that these two performed well at the bottom of the pack, and had fitment concerns, I certainly won’t be buying more of their products regardless of how cheap they are.

Other Testing:

I did more testing with suppressors for comparison, but this post is already plenty long enough so I’ll write that up soon.


r/suppressors • • Sep 30 '26

Nobody independently tests suppressors. So I bought 300 at retail and built Consumer Reports for suppressors.

Thumbnail gallery
269 Upvotes

r/suppressors • • Aug 26 '26

A propane tank 50 cal silencer? What is this, the Wild West?

268 Upvotes

I'm loving every minute of the pandora's box that Silencer Shop Foundation v. BATFE just opened. Original video from 1poundeveryday on Instagram. Check out his other videos: https://www.instagram.com/p/DcbYd_qylwZ/


r/suppressors • • Aug 13 '26

Trump DOJ not appealing NFA ruling !

Post image
257 Upvotes

Is the NFA basically dead ???


r/suppressors • • Sep 19 '26

First can and didnt have to fill out form 4

Post image
247 Upvotes

r/suppressors • • Nov 04 '25

r/Suppressors Sub Is Back!

Post image
245 Upvotes

FYI, the r/suppressors sub is back after being shut down for being unmoderated. Even though there is overlap with the broader NFA sub, I thought it was worth bringing this back with focus on suppressors, related accessories, news, and other related discussions.

Rules are pretty straightforward. Don't be a dick, no private sales per reddit's overall policies, etc. Manufacturers, dealers, etc. are welcome to post for new products, special events, etc. Let me know if there are any questions or further recommendations for anything that I missed.

I changed the settings to allow pictures and GIFs in comments. I'm not specifically offended by pics with feet, but nobody want to see your junk.

Let me know if anyone has any suggestions for how to make this better. Thanks!


r/suppressors • • Aug 26 '24

NEW OCL REDDIT ACCOUNT

Thumbnail
gallery
232 Upvotes

Hey yall, I just wanted to pop in here and introduce myself. My name is Dakota and I'm going to be using this account to help take some of the load off Andrew and his 24/7 reddit presence lol.

Little about me, my main reddit is u/dakotastomm so you may have seen my posts in the other nfa/suppressor subreddits in the past. Andrew brought me on the otter gang back in May, and I've been learning the ropes here at OCL. I've been a 07/02 ffl sot since 2018 so I'm not new to the industry.

Going forward, you can use this account to tag me in OCL issues or even just regular posts. You can message direct for questions or comments, and I'll try to answer them as I can. As always, don't hesitate to reach out directly at [email protected]

Anyways, I look forward to interacting with you all.

Ps, here is a teaser of the new Infinity prototype.


r/suppressors • • Aug 15 '26

One of the first 4473 cans in AZ

Post image
218 Upvotes

I was torn between the Shiv and Incolite 9 but in the end I decided to go big with it being such a historic day for the 2A community. The Cat SC is a beast.


r/suppressors • • Jun 11 '25

Integrally Suppressed 300 BLK

Thumbnail
gallery
215 Upvotes

r/suppressors • • Mar 10 '26

Is the hype real? Hopefully.

Thumbnail
gallery
213 Upvotes

5 day approval on the Ridgeback Rhodie 6. Let’s see what all the fuss is about.


r/suppressors • • Nov 08 '25

AGB Comparison

Post image
213 Upvotes

AGBs are often discussed for tuning gas systems when running suppressed, and it’s not uncommon to see posts asking which AGB to use.  I had a few laying around and decided to pick up a few others to see if I could quantify any major differences.  I ran these on my 12.5 with mid-length gas and my LPM Torch suppressor.  Ammo was PMC X-TAC 55 gr 5.56. They mostly performed as advertised, but there are a few key differences.  My criteria for which AGBs to evaluate is:

  1. Click style adjust

  2. $100 or less

Note that I also own and love the RifleSpeed AGB on my 300 BLK, but for this I wanted to stick with similarly functioning AGBs under $100.

This is a bit of a long read, but note that I listed AGBs in the tables per my final overall ranking. Here are some of the details regarding the AGB adjustments:

Clicks/ TurnClicks to Full OpenCycle When Closed?Clicks to Hold OpenClick FeelWrench Size
Superlative Arms516N13Loose3/32"
SA (Bleed Off Mode)4834
Wojtek630N18Firm1/8"
Aero520N6Good3/32"
Palmetto525N16Good3/32"
KAK526N15Good3/32"
Odin520Y1Good7/64"

Key observation here is that the Odin Works AGB didn’t close off entirely, and I verified it was actually closed (not held open by debris, etc.) and it held open on an empty mag with just +1 click from full closed.  This is a critical point where I would not recommend/buy again.  The Aero AGB only used about 30% of the full range with the suppressor, but I’ve used these many times on both suppressed and unsuppressed rifles. This has never been an issue so I don’t find this to be particularly concerning.

Most of the ball detents for the clicks felt pretty normal on the various AGBs.  The Wojtek one was a bit firm, but still very normal and overall quite good.  The Superlative one felt a bit loose, and seemed to have a bit of a double-click within each setting that felt a bit odd.  It still functioned fine and had no issues adjusting and no concerns that it would move on its own/not hold from use.

Most used a 3/32” Allen wrench for adjustments, which is the same as the set screws to the barrel.  Wojtek uses a 1/8” Allen wrench, which I generally liked better, but either is perfectly fine.  Odin Works uses a 7/64” Allen wrench, and my biggest issue here is that some Allen wrench sets have 64th inch sizes, but a lot don’t.  Technically there’s a slight advantage with a larger wrench, but if you’re not going up to a more common size like Wojtek then I really don’t like the 7/64” size.

Here are some details about design, fit & finish, and also set screw as it relates to carbon, cleaning, etc.

FinishMachiningAero HG FitBall Detent Access
SuperlativeNitridePerfectGoodSide
WojtekNitrideGoodSnugTop
AeroNitrideGoodGoodBottom
PalmettoNitrideGoodSnugSide
KAKPhosphatePoorSnugSide
Odin WorksNitrideGoodSnugSide

Most AGBs showed some minor machining marks that are reasonable to balance quality and cost and were certainly not objectionable.  The Superlative Arms AGB was immaculate and the machining/surface quality was impressive.  They even machined a flat spot that I assume is in case someone wants to drill to pin their gas block to the barrel.  That’s a thoughtful addition that is unique in this group that I reviewed.  KAK’s phosphate coating isn’t my favorite.  I realize that phosphate is mil-spec, which is fine, but the surface shows a lot of scuff marks, likely from being handled roughly or dumped in bulk bins.  The other thing that caught my eye with the KAK AGB was the partial thread exposed by the large chamfer cutting through the ball detent retention screw hole.  Superlative, Palmetto, and Odin works all had a side mounted ball detent and managed to design around this issue.

Aero and Superlative were the lowest profile AGBs and fit easily under slim handguards like the Aero Atlas handguard (which I’ve found to be quite tight getting over some gas blocks.)  Wojtek was a bit bulkier on top, and the others with their side access to the ball detent set screw were snug as well.  Note that all of them were functional and I was able to get an Aero handguard on without any specific issue.

Carbon Lock:

Superlative’s bypass mode seems to work as advertised, and while I don’t like the idea of gas venting from the AGB, honestly when I ran it I really didn’t find it objectionable.  I’ll run it more, but I’d say this is overall well done. Overall it seemed to otherwise function similarly in both restrictive and bypass modes.

Wojtek didn’t show any signs of carbon leaking through to the front of the set screw like the others did.  I’ll run more rounds through it to see if anything changes, but this might indicate that it’ll be less prone to carbon lock.

Aero, Palmetto, KAK and Odin Works all showed visible carbon on the front of the set screw.  Note that I’ve never had an issue with any of these carbon locking, but with carbon passing through like this there’s certainly a possibility of carbon lock.  If you set it once and never need to adjust later then I guess it’s not really a “problem” but it’s a difference that seems to be very much worth noting.

Here’s my overall ranking and the MSRP of each AGB:

  1. Superlative Arms ($100)

  2. Wojtek Weaponry ($65)

  3. (Tie) Aero Precision ($72), Palmetto ($35)

  4. KAK ($70)

  5. Odin Works ($89)

Final Comments:

Superlative had the best machining quality, and their bypass mode is unique and seems to work as advertised.  It’s a bit more expensive than the others, but not objectionably high for what you’re getting.  The adjustment screw stuck out more than I’m used to (only when using it in bypass mode), but looking at their overall design there’s no way to do this differently, and since it’s along the barrel and typically covered by the handguard I don’t have any issues with this.  I only note this because I’d be uncomfortable running this with a short handguard that doesn’t cover the AGB fully (not common, but just something to note).

Wojtek has a solid combination of working well, being well made, and being available at a reasonable price.

Aero and Palmetto are both perfectly acceptable, but both are out of stock.  Aero has their ongoing production issues so buying 3rd party is recommended.  The Palmetto one for just $35 is a great bargain and seems functionally equivalent to Aero.

KAK functioned as well as the others, but at that price point I’d skip it and buy something with a nicer nitride finish.

Odin Works seems to be designed for tuning an unsuppressed rifle, and might be fine for a low backpressure can, but I don't like the fact that it doesn't close off and held back on an empty mag with just 1 click. Based on how it performed in my test, it’s not one that I’d recommend or buy again, especially with so many other better options available.


r/suppressors • • May 08 '25

Rex for my 9x39 build.

Thumbnail
gallery
213 Upvotes

r/suppressors • • Aug 11 '26

Who’s ready to see what happens tomorrow?

Post image
211 Upvotes

I try not to hold my breath when big things MAY happen in regard to the NFA rules/law changes but I actually have my hopes up for this one. Especially after the tax stamp was reduced to $0.


r/suppressors • • Nov 29 '25

got a bunch of these suppressor covers from Costco.

Post image
208 Upvotes

r/suppressors • • Jan 26 '26

I just love OCL

Post image
204 Upvotes

I mean, great cans and by far the best stickers.

We all know it’s JUST about the stickers.


r/suppressors • • Sep 12 '26

As much as Maryland sucks, at least I can buy Suppressors on a 4473

Post image
200 Upvotes

Most dealers around here have not started selling them on 4473’s yet, but a few are.

I picked up the Dead Air Mask and Sig Hexium 556 Inconel from a dealer via Silencer Shop.

The Dead Air Primal and the Dead Air/Ruger 910Ti I just impulse bought at a local gun show this morning since the dealer was selling them out the door.

There isn’t much firearm related freedom we get to experience in this shitty state, but I felt a glimpse of what it’s like to be a free American walking out the door with them.

Any tips on dealing with pistol cans like the 910Ti? I have other 9mm suppressors, but this will be my first dedicated pistol can.


r/suppressors • • Aug 06 '25

Never leave home without it!

Post image
198 Upvotes

r/suppressors • • Aug 22 '26

Comstock Armory New Prototypes (CAT QD, Xeno, and more) and Web Tool Updates

Thumbnail
gallery
197 Upvotes

I have some new prototypes to share today!  These are all things that are actively being worked on and expected to be finished up at various points over the next few months.

Note that the samples are uncoated, but production parts will all have our usual black finish.

CAT QD/1-16 and Xeno compatible mounting parts

We’ve had a bunch of requests for these.  We’re starting out with our RPA and recessed micro brake and will expand into other parts (flash hiders, more brakes, adapters, etc) for a wide selection.  They’ll also be added to the fitment charts and interactive tool on release so you can check compatibility with your build.

Plan-B compact recessed 4-Prongs

This is something we showed prototypes of previously, but at this point we’ve nailed down our final design.  The recessed 4-prongs are a great option for users who like the flash suppression of the current full size 4-Prong, but would prefer a more compact package.  Our initial testing shows that these are quite effective even with the reduced prong length.  Like the original 4-Prong, we’re using mass shifted tines to avoid the ringing noise that you otherwise get in a pronged flash hider.

Taper shoulder micro brakes

The Sig guys will like this one.  These are based on our micro brake and designed to work on taper shoulder barrels without spacers or caps.  Feedback showed a preference for the muzzle device to cover most of the barrel taper, so the rear section with the wrench flats is extended to make for a cleaner look.  These will be made in 1/2-28, 5/8-24, and M13.5x1 LH (MPX).  We’ll also likely add a flash hider version later on.

P90/PS90 micro brakes

This is another thing we’ve had requests for.  Like the previous parts, these are also going to be in our micro brake style.  But based on demand, we may also do a more traditional P90 muzzle device for the people who prefer that style.

Web updates and product finder tool

Individual product pages now show dealer inventory at the top, automatically sorted by highest quantity available.  There’s buttons to expand the whole list or add to the product finder.  The new product finder page can be used to create a list and filter dealer inventories for everything you’re looking for.  This is especially helpful if you have several different items you’re looking for and want to get it all from one place to save on shipping costs.

As an important note, the product finder only includes dealers who order from us directly.  There are other places that carry our parts but will not show up in the finder since they order through our distributor network.  

The fitment tool now saves the current settings into the URL and has a “Share Configuration” button which lets you send it to other people.  If you have questions about a setup, feel free to send that to me so I can see exactly what we’re working with!

It also has an “Add to Finder” button which takes you to the product finder page and sets filters from your configuration.  You may still have to select for material or caliber, but this makes it easier to know you’re getting the intended parts.

Quick note on the fitment tool: If you’re going for a tight gap (<0.10” between the handguard and adapter), I would highly recommend double checking the true length since some handguards are longer or shorter than nominal.  Make sure the dimension for “Barrel shoulder to handguard end” is the same as the actual gun.  If it’s different, you can adjust the handguard length in the model to match.  Digital calipers are helpful for getting an accurate measurement.

That’s everything for now!  As always, the support is greatly appreciated!

- Nathan Comstock


r/suppressors • • Jul 05 '25

Hot take: Suppressors should not be as expensive as guns.

197 Upvotes

Look, I get it. A suppressor is not just a series of baffles just like an optic isn't just a magnifying glass. I get that the research, testing and development of making sure a red light dot stays in the same place no matter what is expensive to say the least. I get that creating a baffle that doesn't explode by overheating or interfere with the bullet zipping out of the muzzle is very difficult and requires meticulous development. I also get that our government for some reason thinks that suppressors allow me to fire a 50 cal in a library without anyone hearing the gun and tax you (hopefully not for long) 200 bucks. I get it. But a gun with no suppressor is still a gun. A suppressor with no gun is a paperweight. But when you get suppressors that cost as much as buying a BCM, Eotech, sling and light with 3 mags, I seriously question why. Before people jump to conclusions, yes I own suppressors, yes I own higher quality than PSA (I have no problem with PSA) and yes, once again I understand the R and D that goes into optics, suppressors, lasers-etc. I just don't think a KA suppressor is worth 2000 dollars.