r/stratux • • Apr 10 '17

Airline flights

1 Upvotes

I know this has already been mentioned in a couple different threads, but this will be a little more in depth. As this is a developing issue, it might be good for the Stratux community to compile a list of policies/experiences on different airlines.

I recently flew with Allegiant, on the first leg there were not comments on my Stratux. On the second, the flight attendant asked me if I had my GPS enabled and whether I was tracking the flight. I explained that I had a passive receiver and it was not transmitting, so it wouldn't interfere with any other signals. She didn't seem pleased, but seemed to get the idea of what I was saying. She came back a little while later and said that the company policy prohibited it, even if the regulations didn't. I calmly explained that it wouldn't cause any interference but that if the captain had requested, I would gladly turn it off.

Here is what Allegiant says on their website: "Laptops, portable movie players, portable music players, and other approved devices can be used onboard the aircraft. The in-flight crew members will notify all passengers when it is safe to use these devices. Portable radios, cell phones, and other such devices cannot be used during flight at any time. Even in 'airplane' mode, they may interfere with the navigation devices on the aircraft. If there are any questions about a certain device, please ask an in-flight crew member." https://www.allegiantair.com/faqs

That is probably a very watered-down policy of what their official documents actually say, so I may never know. I do know that it's a bunch of hogwash, because an untold number of passengers use their cell phones in airplane mode on these flights (and many probably use their phones out of airplane mode, but let's not go there).

Here is what Title 14 of the CFR's has to say: §121.306 Portable electronic devices. (a) Except as provided in paragraph (b) of this section, no person may operate, nor may any operator or pilot in command of an aircraft allow the operation of, any portable electronic device on any U.S.-registered civil aircraft operating under this part.

(b) Paragraph (a) of this section does not apply to—

(1) Portable voice recorders;

(2) Hearing aids;

(3) Heart pacemakers;

(4) Electric shavers;

(5) Portable oxygen concentrators that comply with the requirements in §121.574; or

(6) Any other portable electronic device that the part 119 certificate holder has determined will not cause interference with the navigation or communication system of the aircraft on which it is to be used.

(c) The determination required by paragraph (b)(6) of this section shall be made by that part 119 certificate holder operating the particular device to be used.

https://www.ecfr.gov/cgi-bin/text-idx?SID=c9e8ec48445be819b3c5b4f974debb67&mc=true&node=se14.3.121_1306&rgn=div8

So, if indeed Allegiant has a list of approved devices and GPS receivers like the vk-162 are not on it, then she was right to request it not be used. I have no idea whether that is the case, but without seeing the part 119 certificate holder's official operating documents, it is hard to know.

Edit: rewording last paragraph to reflect that per 121.306 items must be specifically approved, not disapproved.


r/stratux • • Mar 15 '24

New feature: VOR RNAV

0 Upvotes

Hi Stratux dev-team,

Many years ago we had devices like KNS-80 allowing RNAV using VOR/DME. FMS use DME/DME navigation (both of them impractical with Stratux), however an RNAV VOR/VOR solution should be doable using the VOR location database (can be ID'd through Morse code) and radial (crossing 2 radials minimum)

With all the GPS denial of service ongoing in many parts of Europe, providing the users with another way to see the location of the ship not using GPS would be a great way to bring more safety to users of the Stratux. It could "simulate" a GPS position with poor accuracy when in reach of 2 VORs with not so good accuracy but probably better than no navigation at all.

bmartin_adx


r/stratux • • Apr 01 '16

FlightAware Pro Stick, revolutionary USB ADS-B and MLAT receiver announced

1 Upvotes

See: http://flightaware.com/news/article/FlightAware-Pro-Stick-revolutionary-USB-ADSB-and-MLAT-receiver-announced/221

I wonder if it is Stratux compatible? If so this could be an alternative to the current receiver.


r/stratux • • May 23 '19

release the stranglehold on FIS-B data

4 Upvotes

As many of you are aware, Stratux relies on information transmitted over the ADS-B frequencies (1090MHz ES and 978MHz UAT). The problem is the technical standards for this information is proprietary. I've decided to do a GoFundMe page to hopefully get access to what the RTCA hoards.

https://www.gofundme.com/adsb-information-is-important

Basically, I'm asking you to support me in becoming a RTCA member. Once this is done and I have access to the technical data, I plan on implementing open-source libraries that are traceable to the standards. This will improve the quality of Avare and others.

The FAA is planning on implementing the following new features for FIS-B.

These new FIS-B products are:

Center Weather Advisory. These unscheduled bulletins warn of conditions that meet or are approaching not previously forecast airmet, sigmet, or convective sigmet criteria, including moderate or greater icing; moderate or greater turbulence; heavy or freezing precipitation; conditions at or approaching low IFR; surface winds or gusts greater than 30 knots; low-level wind shear (2,000 feet agl and below); and volcanic ash, dust storms, or sandstorms. CWAs are valid for up to two hours and if a forecaster determines it’s warranted, they may be issued hourly for convective activity. Transmission interval: 10 minutes.

Cloud tops. The forecast altitude of cloud tops will be received from the National Weather Service’s High Resolution Rapid Refresh (HRRR) model.

Graphical airmet. This graphical advisory of weather conditions that may be hazardous to aircraft, but are less severe than sigmets, is issued by the Aviation Weather Center at 0245, 0845, 1445, and 2045 UTC; they’re updated as necessary.

Icing, forecast potential. The icing product provides forecast icing probability, icing severity, and anticipated presence of supercooled large droplets at 12 altitude levels—every 2,000 feet, from 2,000 feet msl to 24,000 feet msl.

Lightning strikes. The lightning product shows recent cloud-to-ground lightning strikes, using lightning data provided by Vaisala. This information is available only for the continental United States, so lightning information will not be provided in Alaska, Hawaii, Guam, or Puerto Rico.

Turbulence. The turbulence product provides the forecast maximum intensity of turbulence at 12 altitude levels—every 2,000 feet, from 2,000 feet msl to 24,000 feet msl (the same altitudes for which icing forecasts are provided).

I hope that you will support my efforts and I promise to support your efforts in making Stratux a better opensource project.

-brad walker


r/stratux • • Feb 09 '21

Flew with my new stratux for the first time today. Did I waste my money?

1 Upvotes

I bought the DIY kit here https://www.amazon.com/gp/product/B08F1BYV35/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

First, the AHRS was garbage. Not even remotely correct, and I reset it a few times while in the air. I calibrated it while straight and level both in foreflight and on the stratux page (192.168.10.1).

Next, traffic wasn't showing on my route, only back at the home airport which has a towered airport close by. If I understand this correctly, Stratux receives ADS-B In info from towers, the route we were on had no towers close by, so it doesn't get traffic info? So is this feature worthless unless you are flying close to control towers? On top of that, when we got closer to home, foreflight warned me of some VERY close traffic, turns out it was detecting the plane I was flying. This was all verified because we were flying with a plane that already has ADS-B in.

The two features I wanted most, back-up AHRS for emergencies, and traffic for better situational awareness, don't seem to work well. Am I doing something wrong or is this working as intended. Any help or feedback would be appreciated.

EDIT: On foreflight in the top left it said no towers, or marginal when we got closer to home. Not sure if that info is helpful in trying to determine if I was the problem or if the stratux is the problem.


r/stratux • • Aug 20 '20

Another Pi Zero call for help!

1 Upvotes

I know I should use supported hardware, but I want to play with the configuration and shielding of a stratux based around the pi zero!

It seems jpoirier's script should work, but I am running into the following issue. The latest raspian image is installed, connected to wifi, and accessible through ssh. The stratux-setup.sh works well until it gets to make dump1090, at which point it throws the errors below, and quits.

I have used linux just enough to get me into trouble, but am always learning. Has anyone seen this before? Any thoughts on what may be causing it and/or how to solve it?

______________________________

cd dump1090 && make

make[2]: Entering directory '/root/stratux/dump1090'

fatal: No names found, cannot describe anything.

gcc -DMODES_DUMP1090_VERSION=\"\" -O2 -g -Wall -Werror -W `pkg-config --cflags librtlsdr` -c dump1090.c -o dump1090.o

fatal: No names found, cannot describe anything.

gcc -DMODES_DUMP1090_VERSION=\"\" -O2 -g -Wall -Werror -W -c anet.c -o anet.o

fatal: No names found, cannot describe anything.

gcc -DMODES_DUMP1090_VERSION=\"\" -O2 -g -Wall -Werror -W -c interactive.c -o interactive.o

interactive.c: In function ‘interactiveShowData’:

interactive.c:140:44: error: ‘%03d’ directive output may be truncated writing between 3 and 9 bytes into a region of size 5 [-Werror=format-truncation=]

snprintf(strFl,6,"F%03d",(a->altitude/100));

^~~~

interactive.c:140:42: note: directive argument in the range [-21474836, 21474836]

snprintf(strFl,6,"F%03d",(a->altitude/100));

^~~~~~~

interactive.c:140:25: note: ‘snprintf’ output between 5 and 11 bytes into a destination of size 6

snprintf(strFl,6,"F%03d",(a->altitude/100));

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors

make[2]: *** [Makefile:37: interactive.o] Error 1

make[2]: Leaving directory '/root/stratux/dump1090'

make[1]: *** [Makefile:26: xdump1090] Error 2

make[1]: Leaving directory '/root/stratux'

make: *** [Makefile:14: all] Error 2

cp -f gen_gdl90 /usr/bin/gen_gdl90

cp: cannot stat 'gen_gdl90': No such file or directory

make: *** [Makefile:40: install] Error 1

ERROR - gen_gdl90 file missing, exiting...

______________________________


r/stratux • • Mar 10 '21

.sh problem

0 Upvotes

Updating from a much older version. Successful download to my iPad, but when unzipped from download it was a ..IMG file. Tried using that, tried renaming as .sh file. Neither was recognized. Any ideas ?


r/stratux • • Dec 01 '18

Stratux EFB software app for iOS

0 Upvotes

Anyone have a better free app other than fltplango? I haven't filed a flight plan in 30 years, just not the kind of flying I do but I do like the idea of seeing traffic even up here in VT & NH. I like having a list of waypoints that I can edit/add/delete and you can't do this with flyplango. The best app for GPS is the $2.99 MotionX GPS, been using that for 5 years at least, works great.

7AC Champ, presently on skis


r/stratux • • Nov 05 '21

Raspberry Pi Availability

0 Upvotes

I was gearing up to build my Stratux soon but looking at the slim availability and the price hikes going on I'm thinking it may just be better to wait. I can't find a Raspberry Pi 3 for less than 50 bucks and I've seen them all the way up to $75! Anyone know of a better place to look?


r/stratux • • Jan 21 '20

Stratux - Ipad can not find it

0 Upvotes

Hi Everyone,

I need help with y newly built Startux.

I got a steady green light on and my ipad can not find the Startux.

I rebooted the unit and my ipad and still unable to find it.

What am not doing right??

Please help me..


r/stratux • • Jan 07 '21

stratux app for iphone availability

0 Upvotes

I can't find the app at the app store where I think I got it for my ipad. Has it been delisted??

Is there another source?


r/stratux • • Apr 23 '18

Potential $5 ADSB OUT based on a USB to VGA dongle, has anyone started working on implementation?

Thumbnail
osmocom.org
2 Upvotes

r/stratux • • Apr 01 '16

BB is watching

Thumbnail
money.cnn.com
2 Upvotes

r/stratux • • Apr 15 '17

Updated Stratux Amazon Shopping List

3 Upvotes

r/stratux • • Mar 31 '16

RPi3 kit from Vilros - pre-loaded with v0.8r2.

Thumbnail
amazon.com
0 Upvotes

r/stratux • • Apr 11 '20

Think my magnetometer failed.

1 Upvotes

Hello, I've noticed my heading is not working. All attitude indications appear correct, but the heading readouts in the logs are all 0. I ordered a new AHRS/fan control, but it won't be here in forever because of the Chinese virus. Has anybody else had a magnetometer failure? Thanks in advance! Andy


r/stratux • • Jul 28 '18

Problems with Amazon fulfillment

1 Upvotes

I'm new to this sub. Does the person/s who runs the Stratux Store on Amazon run this sub, or regularly review it? I'm having a real problem with the Amazon fulfillment and they're telling me they have no way of contacting the seller. If the right individuals are on this sub, it would be great if you could PM me.


r/stratux • • Sep 29 '16

Foreflight

1 Upvotes

I just upgraded my iPad to an Air 2. I have Foreflight v8.1.1 (2350) I power my Stratux up and connect to the network. When I go into devices, there's nothing there. On my old iPad, it connected automatically.

Anybody have any idea why the new iPad won't connect to my Stratux?


r/stratux • • Feb 13 '16

How to "top off" your Anker

0 Upvotes

So, your charging up your Anker. When it's full, the blue LED's turn off. You try to top it off, like you do at the gas pump, by unplugging your power cable and plugging it back in. This worked with the KMASHI. But the Anker IQ circuit is smarter. The blue LED's come on for a moment, and then off, saying "I'm already full."

But if you plug your Stratux into your Anker and let it run for just a few minutes, I have found that I can charge up the Anker for another half hour or more. (YMMV. I purposely use a 1 A charger, so charging is purposely slow for me.)


r/stratux • • Nov 12 '19

Any recent input on the fan issue not kicking on at 55c?

1 Upvotes

Regarding this issue on the fan not starting as 55c as coded https://github.com/cyoung/stratux/issues/663

Anyone found a solution to the code to solve this ? Last update to that thread was 2018 so I felt its worth asking. I haven't tried the fix of disabling PWN, it would be nice to have the fan only kick on when needed.


r/stratux • • Jan 12 '16

Making money of Stratux :(

1 Upvotes

I know someone previously floated the idea of building and selling these and was shot down by a lot of people .... So I have no idea who is behind this http://i.imgur.com/bmC6Y0Z.jpg

This project has a lot of good people working on making this project better everyday, I just feel sad that someone saw an opportunity to cash in on other people's work.

$400 for dual, GPS & AHRS plus a case .... Daylight robbery !!


r/stratux • • Apr 17 '18

Avare I/O plug in

1 Upvotes

When I start listening on port 4000 nothing happens. It used to work but just stopped. The wifi connection is good and I can access the Stratux page, but there is no raw data coming in. I have reinstalled everything and re-flashed the card but nothing.


r/stratux • • Jun 13 '20

1.5" Diameter Stratux Decals Available

Post image
1 Upvotes

r/stratux • • Sep 03 '17

My Black Box

Thumbnail
imgur.com
1 Upvotes