r/stencils • • 1d ago

Was asked what my stencil stacks sometimes look like

Thumbnail
gallery
14 Upvotes

The first two pictures are from my 27 layer George Michael piece I did when I was 18 (unfortunately I don’t have a full wide shot of that) but the other stack is for 20 layers in total and I’m half way through it so far.


r/stencils • • 1d ago

Some 10 layer hip hop stencils.

Thumbnail
gallery
19 Upvotes

6x6 inches.

Both were gifts for friends.


r/stencils • • 2d ago

Hello, I’m Glua, I’m new to this subreddit but I’ve been multilayer stencil artist based in London for over 16 years and I currently have a solo exhibition up for public viewing.

Thumbnail
gallery
67 Upvotes

The last 2 pictures of the current piece I’m working on, proving to be a bit more difficult as I’m recovering from a concussion


r/stencils • • 1d ago

A 27 layer stencil I did back when I was 18 (10x8 inches)

Post image
23 Upvotes

r/stencils • • 1d ago

Seeking Advice for an Intricate Hand-Traced and Cut Stencil (Complete Newb)

Thumbnail
gallery
3 Upvotes

Hello! I know this is a long read, but I am in a tight situation, so if anyone with knowledge on this stencil making stuff at all could take the time to weigh in, I will be so grateful.

I am making a stencil for the very first time because some dude on Etsy decided it would be really fun to tell me he could do something he couldn't and send me crap. Now I have a few days including drying time and heat setting to make a stencil and hand paint this on the garment (Don't worry, I got a backup in case this goes really super south and will just wear a plain one if it sucks... but I dont want to...)

So quick story time to help justify why I've decided to do this when sane people would say "that seems like a dumb idea": I was supposed to recieve a faux embroidery patch of an intricate design I drew and wanted to put on the blazer that I will wear for my bar admission ceremony on 11/20. The Etsy guy wasted a lot of time I could use right about now on what ended up being a piece of crap. The design is significant to me in many ways, I got my hopes up this was coming to life to wear for a very important moment instead of a boring black suit, which is just not very me, and then upon seeing the crap patch, I decided, like a big dummy, I could just fix it by making a stencil and hand painting this monster of a design. (23 inches long and detailed as all get out). I should add I am an artist, but very much the drawing kind and just started learning digital art, not the textiles kind that knows this stuff. So I can paint at the very least.

Here are the supplies I have thus far (I am in a city with no car, so please keep that in mind if your advice is to get something. My local craft store has a lot, but not everything):

- Original Frisket Film (15 x 10 in sheets) I will be using 2 for the stencil

- X-Acto Knife, #11 with spare blades

- Jacquard Textile paint, color 220 Super Opaque White

- Kafka Script Liner, size 5/0 (might need to go back for a slightly larger brush, maybe a pinstriping brush???)

- Self Healing Cutting Mat

- Bits and bobs I already had for sewing and stuff, like tailors chalk

Now my plan is to use what I make with this film as a true stencil for the fine lines, and as a general guide for the flowers because I don't have the skill or time to cut this many lines into a stencil with bridges and have it not break. So the stencil will be the lines and each flower will be completely cut out as of now and I use the very edges of the flower portions as a guide to place the outside lines, and paint the petal details by hand. I'm using the crap patch to trace because at the very least, it is the correct size. I attached a photo of the design that I drew on a blazer to figure out sizing to give you an idea of the general goal, also one to show how I'm splitting the stencils, as well as the progress I have made tracing on the film so far with a pencil for reference on how thin these lines are (sorry for the glare, but no light makes the lines hard to see, I plan to retrace when I have the lines because the crap patch is textured and I cant press hard or the lines will be weird. For context, the lines in the drawing are much finer than they will be on the blazer, I'm even trying to make them a little thicker as I trace.

Basically, when it comes to the cutting stage, I think I know where to put bridges (but if someone wants to suggest where to put them, I'm open, it's a bit of puzzle to make sure the right pieces stay and the right ones fall out). I have marked reference points to place the stencil. I think my main question is just what are your best tips for a girl with an X-Acto knife, some sticky film and a dream? Also whether I'm on the right track or if something is way off. I have logistics of a test patch and how I will heat set it and testing this stuff ahead of time, and my timeline currently lands me heat setting this on Wednesday (11/18). Thursday I have a little time, but will also be traveling to the capital of my state where this ceremony is. The part that is scaring me most is exactly how I cut this once it is traced and bridges marked, and how to best peel this and transfer it with such intricate, thin lines and not destroying it in the process somehow. Do I cut through the paper backing? Do you apply this like wallpaper with the whole peeling as you stick?

I will also make some test stencils, but I can't do a full test. Time feels better spent on being very careful making one really good one.

I know the ask is a bit vague, but that's just kind of where I'm at. I would appreciate any and all advice. Today is all the tracing and some of the cutting out. I dont paint until Monday and Tuesday.


r/stencils • • 3d ago

Street style table

Thumbnail
gallery
44 Upvotes

50" x 28", acrylic spray paint, stencil, found objects, stickers, paint marker, epoxy resin on found tabletop.


r/stencils • • 4d ago

Lotería/Tarot card piece in Seattle (4 stencils)

Thumbnail
gallery
95 Upvotes

r/stencils • • 5d ago

An alternate version of my "Negative Creep" piece featuring Kurt Cobain of Nirvana. I wanted to try a more traditionally sized version with a more industrial background and muted colors. The portrait was done entirely with spray paint and stencils that I cut by hand.

Post image
22 Upvotes

r/stencils • • 5d ago

"My painting ""Them Bones Are Louder Than Love In A Corduroy Heart-Shaped Box."" Spray paint on canvas. 60 x 48 inches."

Post image
3 Upvotes

r/stencils • • 6d ago

Clean up and double check after yourself

Thumbnail
gallery
27 Upvotes

Was at a public spot i usually go to to practice my stencils, and saw that someone had added something to a stencil piece I had done recently.

Looking at it from a distance, I thought they added a squirt gun or a laser gun. I got closer, i somewhat recognized it as one of my first stencils I had made of a raccoon.

All I could do was laugh, I am not mad at it. Its kinda funny and ironic in a way, it's nice to see how I've progressed as an artist, and then someone comes by doing this. I hope they enjoyed themselves and get the drive to keep doing it.


r/stencils • • 13d ago

This is a new painting of mine. It’s stencilled out and made using spray paint.

Post image
40 Upvotes

r/stencils • • 15d ago

Sadam Hussein 3 Layers

Post image
4 Upvotes

r/stencils • • 15d ago

Saint Benny

Post image
52 Upvotes

Saint Benny
1/1
Spray paint and paint pen on postage.
15x9.5

Benny was an amazing dog. My friend Kurtis loved and cared for him so much. He unfortunately had to part from us all a few years ago. He is loved and missed by all of my friend group.

I decided to make this piece for Kurtis as a surprise. They are one of my closest friends. I wanted to give them something from my heart.

Rest in peace Saint Benny, you will always be loved and missed.


r/stencils • • 16d ago

got a new stencil

Post image
4 Upvotes

got a new stencil and i wanted to play around. *markers on paper


r/stencils • • 16d ago

What would be a good stencil to use to do a pumpkin in honor of Patrick Stewart?

Thumbnail reddit.com
3 Upvotes

r/stencils • • 17d ago

J'ai vu ces stickers dans ma chambre, je les ai redessiné

Thumbnail gallery
2 Upvotes

r/stencils • • 18d ago

The Tragic Autumn, me, spray paint on plywood,2019

Post image
9 Upvotes

r/stencils • • 23d ago

"""Deny, Defend, Depose"" Stencil seen in Austin, Texas"

Post image
137 Upvotes

r/stencils • • 24d ago Bravo

Caught in her orbit

Post image
66 Upvotes

Made this spiral stencil spray-paint portrait of my wife. I love how the black-and-white pattern creates an optical illusion and comes together to reveal the portrait. It was a fun project, and I’m pretty happy with how it turned out!

What do you guys think?


r/stencils • • 25d ago

Thought yall would appreciate the newest balloon painting i did

Post image
38 Upvotes

r/stencils • • 26d ago

Debbie Harry/Blondie ❤️❤️

Thumbnail
gallery
239 Upvotes

r/stencils • • 29d ago

Death cult

Post image
21 Upvotes

r/stencils • • 29d ago

Pay up

Post image
20 Upvotes

r/stencils • • 28d ago

Expedition 33 Pumpkins?

1 Upvotes

I am desperate to carve an E33 pumpkin this year, but I can't find any drawings, like, at all, that could print and turn into a pumpkin stencil :( I would LOVE to do the Clea and François figurine, it would be so cute 😭 Does anyone have pumpkin stencil leads, or is artistically blessed enough to make a simple lineart?


r/stencils • • 29d ago

“KBLR” •Wear The Crown of Sacrifice•

Thumbnail gallery
6 Upvotes