r/smartlife • • 5d ago

SmartLife Resetting multiple downlights

0 Upvotes

This might be a silly question, I'm new to this smart kit.

I recently got 10 downlights and tested a couple of them. They pair to my phone for now, eventually I will get a BT bridge and expand the setup in my house.

In the instructions it says I can reset a light back to pairing mode by switching the power 5 times.

Obviously they need to go in the ceiling. Once I do that, if I have an issue with one light, say it loses connectivity and I can't reset it from the app, then how do I reset it without affecting the others? Would I need to power cycle all 10 of them from the wall switch and pair them all again?

I was thinking about this yesterday so I tried pairing two lights at once and this had issues: the app would search and find both lights, however it would only pair the first one and not the second one. Then when I power cycled them both it would reset the first one. Basically I could only ever pair one light.

It kind of concerns me having 10 of them in the ceiling and only being able to pair one of them.


r/smartlife • • 5d ago

SmartLife Is it possible to initiate a tap-to-run automation for a finger bot without a hub?

1 Upvotes

I bought a finger bot and can control it manually from my phone via bluetooth. I tried making a tap-to-run automation where the finger bot presses a button a regular ~10 minute intervals. But if I press for it to start from my phone nothing happens. Is this a feature that requires a hub?


r/smartlife • • 6d ago

SmartLife Home Screen on SmartLife app doesn’t give me dimming options or power button

1 Upvotes

Anyone else having this issue that’s found a solution? My older New One dimmer plugs work fine but the two new ones I’ve bought make me click on the dimmer to enter its settings to be able to turn it off rather than the old way which had those power buttons on the Home Screen.


r/smartlife • • 15d ago

Tuya smart device not sync with new Daylight time in Alberta

1 Upvotes

Every thing is good on my phone, the time has self update. Insteed not update because we stay at daylight time. But my smart devices has go back to standard time(-1h).
On tuya it said it sync with the network but my phone is connected to the same network and it the good time. I didnt find how to change my devices time because tuya dont have any option for manualy change the date and time.

Anyone have experince that and do you have found a solution?


r/smartlife • • 16d ago

Smart Life suddenly stopped adding devices through EZ Mode (Quick Wi-Fi Pairing) – AP Mode still works

2 Upvotes

Hi everyone!
I’ve been using the Smart Life app for quite a long time and have several Tuya-compatible smart devices connected to it.
However, at some point, I started experiencing a strange issue: the app suddenly stopped adding new devices using EZ Mode (Quick Wi-Fi Pairing).
Here’s what happens:
When I try to add a new device, it is successfully detected and appears in the app’s Quick Wi-Fi Pairing mode.
However, when I tap to add it, the pairing process starts but eventually fails with an error.
The only way I can successfully add new devices is through AP Mode.
With AP Mode, I have to manually select the device type, connect my phone to the device’s temporary Wi-Fi network, and then follow the setup process. This method works perfectly without any problems.
What’s particularly strange is that EZ Mode used to work perfectly before. I’m still using the exact same iPhone and Wi-Fi router that I was using when everything worked normally. I haven’t changed my network configuration or the way I set up my devices. The problem simply started happening out of nowhere.
Another important detail is that the app can still detect the new devices in EZ Mode. The problem occurs when I actually try to add them and complete the pairing process.
So far, this issue seems to affect new devices in general, while AP Mode continues to work normally.
Has anyone experienced something similar?
Could this be related to a Smart Life app update, an iOS update, a Wi-Fi communication issue, or something on Tuya’s server side?
Is there any way to restore EZ Mode functionality without having to configure every new device through AP Mode?
I’d really appreciate any suggestions or ideas. Thanks in advance!


r/smartlife • • 16d ago

SmartLife Eightree wifi plug not following schedule

2 Upvotes

My eightree wifi plug is not turning off and turning on at the times I set.


r/smartlife • • 16d ago

New British Columbia timezone

1 Upvotes

British Columbia dropped daylight savings November 1st, and now my automation is an hour off for all my devices. Will SmartLife be working on a time zone fix?


r/smartlife • • 17d ago

Wifi breaker worked for few months, and suddenly offline

1 Upvotes

Hi all,

I wanna ask if I perform a re-add device (WiFi breaker), the previous data (energy usage previous months ago) will be erased? I wish to retain that data, anyone can share how to do that?

Thank you.


r/smartlife • • 22d ago

SmartLife Raftec R09RF / Hysen HY09RF WIFI wireless boiler thermostat (Tuya, Smart Life): pairing only worked on a 2.4 GHz guest network with a plain password - setup notes

2 Upvotes

TL;DR: the Wi-Fi module sits in the receiver box next to the boiler. Pairing kept failing on my main network (the password has a "!" in it). A 2.4 GHz guest network with a letters-and-digits password paired on the first try in AP mode ("Blink Slowly"). Also check Temp Calibration, and don't panic when Child lock blocks the app.

Posting this because I found almost nothing about this thermostat online. Raftec R09RF is sold in Ukraine. Its manual and menus match the Hysen HY09RF WIFI, so I'm pretty sure it's the same device rebadged. App: Smart Life (Tuya).

How it works. The thermostat (the thing with the screen) measures the room and decides when to heat. It talks to the receiver over 433 MHz radio. The receiver sits next to the boiler, switches it with a relay and is the only part with Wi-Fi. So the path is phone > Tuya cloud > router > receiver > thermostat.

Pairing that worked (iPhone, Smart Life app as of Oct 2026):

  1. Smart Life: + > Add Device > Add Manually > Small Home Appliances > Thermostat (Wi-Fi).

  2. Pick a 2.4 GHz network, enter the password, Next.

  3. On the "Reset the device" screen tap "Confirm the indicator is blinking", then choose "Blink Slowly" (AP mode). "Blink Quickly" is EZ mode.

  4. Hold the button on the receiver until the blue LED blinks slowly.

  5. Go to Connect: join the SmartLife-XXXX hotspot in iPhone Wi-Fi settings ("no internet" is fine), go back to the app and wait next to the receiver.

  6. Done when the blue LED stays on.

What failed: my main network with "!" in the password, "Failed to add the device" every time. What fixed it: a separate 2.4 GHz guest network on the router (TP-Link Archer AX73), WPA2, password with only letters and digits. Worked first try. The module is 2.4 GHz b/g/n only, WPA/WPA2.

Stuff I learned after pairing:

  • Child lock in the app locks the app too. With it on I couldn't change the temperature or open Setting, only toggle the lock itself. Took me a while to figure out.

  • If Setting asks for a password, it's 123456.

  • Check Temp Calibration. Mine was set to -9, so the thermostat read 9 °C low and the house was way too warm. I set it to 0 and compared with another thermometer.

  • On USB power (no batteries inside) a change in the app shows up on the thermostat in a few seconds. On batteries it syncs every 20 min (menu B5/B6).

  • Program Type "7 days" means one schedule for all 7 days. 5+2 is weekdays plus weekend.

  • "The Wi-Fi signal of the device is weak" banner: tap it to see the dBm, around -70 or worse is weak. Mine sits in a kitchen cabinet next to a metal boiler.

Radio link lost (antenna icon blinking on the thermostat, red LED on the receiver blinks 2 or 3 times):

  1. Turn the thermostat off.

  2. Hold the clock key 3-5 s, then short presses on the clock key until B3.

  3. Power-cycle the receiver.

  4. While its orange LED is on (10 s), tap up on the thermostat until it shows 55.

  5. Wait 5 s and turn the thermostat on.

Receiver LEDs: green is power. Orange is the 10 s pairing window after power-on. Red on means heating; red blinking 2x is not paired, 3x is no radio signal for an hour, 4x is an external sensor alarm. Blue fast is EZ, slow is AP, steady is connected, 2 quick blinks is a Wi-Fi error.

Menus on the thermostat itself: with the thermostat off, hold the grid key (9 dots) 3-5 s for menu A: A1 calibration, A2 on/off difference, A4 lock type, A7/A8 min/max setpoint, A9 state after a power cut. Hold the clock key instead for menu B: B3 pairing, B4 sensor type, B5/B6 radio intervals.

Українською коротко: Raftec R09RF (схоже, це Hysen HY09RF WIFI) підключається до Smart Life через приймач біля котла. З паролем Wi-Fi, де є "!", не підключався; з гостьовою мережею 2,4 ГГц і паролем лише з літер і цифр - з першого разу, режим AP ("Blink Slowly"). Child lock блокує і додаток. Перевірте калібрування: у мене стояло -9.


r/smartlife • • Oct 17 '26

SmartLife Temperature bug

1 Upvotes

I have the inside temperature oscillating between 0,4 and 24 celcius on my new Airton model. Does anyone know if this could be related to a bug in the app ? Or is it a faulty model.


r/smartlife • • Oct 14 '26

SmartLife Smart Life devices greyed out on Google Home

3 Upvotes

Hi everyone! I am not able to get the smart life devices to work on google home, I had a similar issue with Ikea and Hue devices but I finally solved those. I also tried deleting the app, linking, unliking, turning off the phone, installing again and all that jazz. Also tried to tell google to synchronize devices but nothing has made it go from grey to usable in the google home app.

Has anyone experienced this and has a solution to this issue?

Thanks so much!


r/smartlife • • Oct 14 '26

Olafus smart flood light help for induction/auto settings

1 Upvotes

Set the thing up, chose settings and based on reviews and product page said the light could do ambient lighting and brighten when motion for "x" amount of time. Well first day it didnt do that.

Played with some automations, which ive had no problem with Govee lights outside. I think ive messed with every setting possible and it either never turns on, or never turns off, or never brightens with motion and when i go into the app it then shows it in ma ual mode not induction. Does anyone have a setup i could copy into mine to see if it works?

Want:

On at sunset

Ambient lighting (obviously not super bright)

Motion detection brightens to 50-70%

Stays bright 5 minutes

Back to ambient

Off at sunrise.


r/smartlife • • Oct 14 '26

SmartLife SmartLife: Are anyone else's sunrise / sunset automations not working?

1 Upvotes

I have a automation set that at sunset, specific lights turn or and off, ect. And a sunrise one that does the opposite actions.

Neither of them are executing any of the actions in the automation.

Has anyone experienced similar over the last couple of day?

Any ideas how to fix?

Thanks!


r/smartlife • • Oct 12 '26

SmartLife Motion detection should trigger video recording in security cam

0 Upvotes

Animal tracking, so I do not need constant video. I'd like motion detection to trigger video recording to local storage. I'm pretty sure this used to be possible? Have they taken that away to force everybody to pay for a cloudy account?

Web searches imply it's an option, but the posts tend to be 3, 4 years old. It's an Inqmega Tuya "Smart" Solar Wifi Camera. No model # that I can see. If there is a way to do it, could you be real step-by-step as to how you get at the option? Clicking on everything in sight, I have not been able to find it.

If installing some other software to run it might help, I'd be glad to try that. Not impressed with what comes with it. Motion activated recording seems kind of basic for a security camera.

tia


r/smartlife • • Oct 09 '26

Problem with smart bulbs and a wifi 7 router

1 Upvotes

Hi everyone, I'm writing from Italy. I have a TP-Link Aginet XB432v router, and recently, for some unknown reason, my smart bulb (which had been connected without issues for a year and a half) suddenly decided to drop its connection. I factory reset it, but my network just can't find it anymore. Strangely, it switches out of pairing mode (fast flashing) and goes solid, but the app still doesn't pick it up.

I ended up buying a new Imou smart bulb from a local shop. Even though the app actually detects this one, the setup keeps failing. The only way I can get it to connect is by setting up a mobile hotspot and forcing the 2.4 GHz band, but obviously, I lose all my smart home automations doing it this way.

I've been reading up on it, and it seems like the issue might be either band steering or the WPA3 / WPA2-PSK security protocols. I tried setting up a guest network, but if I disable band steering, use the same SSID, and lock it to 2.4 GHz, it forces those exact same changes onto my main network too.

I'm at a bit of a loss here—does anyone know how to fix this? Any help would be massively appreciated. Thanks a lot!

P.S. My ISP is WindTre (an Italian provider), which means my router's firmware is locked down by them, so I don't have access to all the advanced settings.


r/smartlife • • Oct 09 '26

Device offline - smart switch

1 Upvotes

I have a WiFi smart switch which had worked flawlessly for 3 month, however over the last month the schedule always fails

Saying the device is offline but when I go into the app it’s fine
There have been times the device has been genuinely offline and I turn off the switch from the electric consumer unit and then it detects again

I’ve tried repairing it a few times and thinking I fixed it and it’s still happening intermittently.

It might work in evening to turn light on but then it doesn’t turn it off at sunrise and vice versa

If anyone has solved this please let me know?
Alternatively could it be a faulty switch?

Temped to just leave the switch fully on and just have WiFi activated bulbs instead


r/smartlife • • Oct 08 '26

Delayed Start

0 Upvotes

I need to implement a delayed startup for the device after power is restored. I am using a DIN-rail WiFi relay switch with power metering.

Here is the setup:

Relay Status: OFF

Scene

Condition:

Query Status: online

Action:

Delay: 20 m

Switch: ON

This scene does not start after power is restored.

What are your thoughts on this?


r/smartlife • • Oct 08 '26

SmartLife How do I save and recall color scenes across multiple landscape lights?

2 Upvotes

I have 20 RGBW landscape lights in Smart Life: 13 uplights and 7 path lights. I can control their colors individually and in groups, and I currently have them set up for Halloween.

What I’d like is a bank of scenes I can switch between, such as everyday white, Halloween, Christmas, and sports-team colors. Each scene would need to remember different colors and brightness levels for different lights or groups.

Is there a way to save the current settings of all the lights as a scene and recall them later?


r/smartlife • • Oct 06 '26

AP MODE NOT SHOWING

2 Upvotes

When I hold the 'connect' button, the 'AP' sign for pairing doesn't appear. We previously connected it to the smart home app without any issues, but ever since a recent app update, it won't connect anymore. No matter how many times I hold down the button, the 'AP' sign still won't show up. How can i fix it. Thank you! My model is MIDEA A/C MWWA08CRFN8


r/smartlife • • Sep 21 '26

Tuya What happened to this switch?

2 Upvotes

Can't upload videos/pics, but a 2-gang switch I installed not more than a week ago has stopped working and now it's on a weird state:
Both lights are blinking really fast (like every 0,5 seconds) and there's no way to switch modes.
I've even tried to discon the switch form the currency for more than a minute and it does not change the state.
Is it broken??
Thanks!!!


r/smartlife • • Sep 21 '26

New Devices Won’t Connect

1 Upvotes

My cable company did some sort of reset on my WiFi last week. All my smart devices (mostly bulbs and plugs) came back online fine. One did not. So I reset it and it won’t connect in the app. It won’t even show up or be recognized when in pairing mode. I tried other extra smart plugs and got the same result. Then I tried a spare smart bulb. That was able to be picked up in the app but then I got the error “cannot connect to router.” I have already spoken with the cable company twice and they say my network setup is fine. I am all out of ideas because now I can’t add any new devices to my home. Any suggestions are appreciated!


r/smartlife • • Sep 19 '26

SmartLife Need some help with my Zigbee IR Remote Control Wireless Universal Infrared Controller with Temp & Humidity Sensor (used with the Smart Life app).

1 Upvotes

Battery percentage doesn't show up anywhere in the app interface.

AC control fails randomly: Most of the time, it won't turn the AC on or off—whether I use Alexa voice commands or the Smart Life app directly. The weird part is, it only starts working again after I restart my internet router.

Has anyone dealt with this before? Any fixes or network/gateway settings I should look into?


r/smartlife • • Sep 19 '26

SmartLife Bulbs dont show up in the app and dont turn on

1 Upvotes

At first they worked correctly, but then they stop turning on even with the regular light switch and stopped showing up in the app. We tried taking them out and putting them back in, restarting the wifi. Wifi is not 5G.

We have 5 bulbs and only 2 of them broke like this. Are they just broken now or is there something we can do?


r/smartlife • • Sep 17 '26

Tariff setting in pence with decimal point

2 Upvotes

I didn't realise I hadn't set the rates in the right place, had set them on each device, and like many had to ignore the decimal point and remember that the number was 100x the actual rate.

I have just found the place to set the rates for the whole app, and here, you do get to put in the decimal point - the Today square at the top right of the home page, the cog like icon (middle one of three at the top right), then costs, and on Import Tariff click on set, go to edit tariff, and follow the instructions, BUT if you have a variable rate tariff, choose to set your tariff manually as otherwise you have to pay for another service.

You then get to set the rates and times, in pence, with 2 characters after the decimal point. The only frustrating bit being that it can't handle a time period that goes through to the next day, so you have to split that one into one ending at 23.59, and one starting at 00.00.

Hope this helps someone out there.