r/sewhelp • • 15h ago

How to make these fit like the model?

Thumbnail
gallery
128 Upvotes

Ignore the creases around my crotch (haven’t ironed yet!). Just got these beautiful pants in the mail, but I’m so sad they’re baggier than expected. I ordered them in the smallest size so can’t exchange for anything smaller. I’m thinking about taking them to a tailor — is it possible to make it look more fitted like on the model (decreased rise, slimmer pant legs, hem the length, etc.)?

Last photo is standing on my tip toes for reference, as I’d be okay hemming them at least enough that I can wear heels.

As a side note, anyone else having size inflation issues more than ever lately? I’m 5’5 and 120 lbs, I’ve never had to order “petite sizing” but for some reason I’m swimming in all my pants recently lol.


r/sewhelp • • 43m ago

✨Intermediate✨ Help with lining a blouse!

Thumbnail
gallery
2 Upvotes

Hello! I am making the “dilly blouse” by Stitch Witch and looking for suggestions on lining it. The pattern does not include lining and I do not like how flimsy and unfinished the end result will be. I was thinking to line the blouse and then make the pleats double sided, which will give more stability and hide the raw edges, but the pleats will still have to be sewn in with exposed seam allowance. Or I could make a complete replica of the outside including the pleats so it’s almost reversible?? I hope my explanation makes sense. I am a newer sewist so I wanted to see if anyone has any ideas that would give a more professional and clean end result. Thank you in advance!


r/sewhelp • • 17h ago

💛Beginner💛 Why do my pants crease/pull on the crotch like this? Can it be fixed?

Thumbnail
gallery
41 Upvotes

It looks so weird 😭


r/sewhelp • • 1h ago

Looking for a book that covers comprehensively pattern drafting from a bodice block to different types of necklines/sleeves and such

2 Upvotes

I guess basically a pattern drafting textbook?


r/sewhelp • • 1h ago

Juki DDL 5550N industrial machine feed dogs ripping fabric suddenly

2 Upvotes

I‘ve had the same Juki industrial machine for 6 years and have been sewing the same cork fabric and products so this problem is new and sudden. This is my busiest time of year and worst timing. Any advice appreciated!! I cant take the machine anywhere, I live alone and it’s too heavy.

Problem is with the feed dogs when I’m sewing through thick cork strap ends, the feeddogs just started leaving marks and now rips/holes in the cork fabric when I turn a corner (making sure the dogs are down when I turn the fabric). I’ve sewn over 3,000 of these straps. It’s ripping it on the left side of the feed dogs where the height is slightly higher.

I’ve tried changing the needle, lowering the feed dogs, adjusting tension on top and bobbin case, lowering presser foot pressure, and cleaning the machine. It sews everything else fine, no feeding or stitch issues, just happening on this last crucial step.

I switched to the only other needle plate and feeddog combo I had on hand (lighter weight, smaller dogs) to test if it was a burr or something on the other set but it’s still happening. I don’t know what else to check! Screws are all tight, no recent accidents or jams. What am I missing??


r/sewhelp • • 7h ago

✨Intermediate✨ What sleeve head adjustment do I need?

Thumbnail
gallery
5 Upvotes

Hi all,
Working on a new chore coat and running into sleeve fit issues. After a Few
Suggestions here and advice from claude the fit is better but still not good enough IMHO.

I’ve already rotated the sleeve forward 3/8” and Scooped out the front of the sleeve head nearly 1”. Rotating the sleeve more made fit worse. I think it’s a sleeve/shoulder rotation issue since when I push my shoulders back the drag lines go away. I just can’t wrap my head around how to adjust the toile or pattern since the further rotation doesn’t help.
Pic 1 is early iteration with just added body length. Pic 2 shows length, plus 3/8” Rotation, plus 1” trimmed from front sleeve cap. Sleeve head pattern looks mighty strange but fits much better.
Third pic is arms pushed back: front drag line disappears.

Anyone know how what adjustment will help?


r/sewhelp • • 2h ago

Can these straps be shortened?

Post image
2 Upvotes

I want to buy this dress for my partner - she tried it on but found the straps are too long (as you can see by the looped fabric). Is this something that could be shortened? If so, what would you suggest?

The strap extends from the edge of the main front panel, and is the same construction on the back. The dress is 100% silk.

Thanks!


r/sewhelp • • 10h ago

which mending method to use?

Post image
7 Upvotes

Hi lovely people! These 2 holes are on my marching band uniform which is made of 100% polyester and has a black inner-lining. My mom thinks i should sew a patch between the inner and outer layers and clean up the frays, but i'm also considering darning or zigzagging over it with a sewing machine. What do yall think is best (open to other options too)? Thanks!


r/sewhelp • • 5h ago

Vevor fabric cutters

2 Upvotes

I’ve been wanting a pair of electric fabric cutters for a while want to scale up how many layers of fabric I can cut at once, mainly denim. I saw that vevor has a decently cheap pair because all the good ones are like 3-400 bucks. Does anyone have these and if so are they any good for multiple layers of heavy weight fabrics?


r/sewhelp • • 2h ago

Does anyone have advice on how to change the shoulder style on this sweater?

Thumbnail
gallery
0 Upvotes

I don’t mind the gathering/puffing at the wrists but the way the top of the sleeve is designed makes my shoulders look wider and it bugs me— is there any kind of darting or hemming that I can do to make it more like a regular shoulder seam?


r/sewhelp • • 10h ago

💛Beginner💛 Skirt panel width question

2 Upvotes

I’m adding a skirt to a princess seamed bodice. I’d like it to be a simple flared shape- no fitting over the hips. I’d like the panels to line up with the princess seams where it hits the bodice.

Here’s where I’m confused: All the bodice panels are different widths. Say the skirt hem will be 75” in diameter- should each skirt panel be 12.5” at the bottom and anything from 3-5” at the top? Or should I flare each one proportionally?

I hope that’s clear and really appreciate any words of wisdom!


r/sewhelp • • 11h ago

💛Beginner💛 Recommendations for fabrics suitable for fitted boned bodices

2 Upvotes

Recommendations for fabrics suitable for fitted boned bodices (aka """""corsets"""""" hahaha)

I want to use it as a top layer over a dress, or shirt, but maybe something that would work on its own would also be good.

I also want to stick to natural fibers so it's not super hot.

Is linen and/or ramie good enough for that? Should I go for something specific as an intermediate layer?

I don't really care about cinching for this one, I just want it to hold structure.


r/sewhelp • • 11h ago

I can't put my Singer back together

Thumbnail
gallery
0 Upvotes

I'vw decided to try sewing this year, but didn't reallu want to invest and get a new machine, so I got my mom's 40 year old one. The Model is Singer 280C, but it was only sold in Braxil, but the gear is prettu similar to the 290 C - Touch and Sew. I was having problems with the machine and decided to take apart to see if I could fix it, I've found the source of the problem. The thing is, I can't put it back together because there are some pieces I have no idea where they go. Could anyone help? I'm attaching pictures


r/sewhelp • • 15h ago

💛Beginner💛 Is this a job for a sewing machine, or can I fix this by hand?

Thumbnail
gallery
2 Upvotes

This is a tear high along the inseam of a pair of pants, right near the crotch area. As best I can tell, the tear is cleanly along the seam, but the pants are stretchy so I'm not 100% sure. My fingers are visible inside the pants to better show how big the tear is. I don't own a sewing machine myself but can visit family who has one. I know ripped seams can generally be fixed by hand, but is this a long enough tear that using a machine would be better?


r/sewhelp • • 11h ago

Dress Form Advice

Thumbnail reddit.com
1 Upvotes

r/sewhelp • • 12h ago

Any freelance seamstresses here?

1 Upvotes

I'm looking for someone to make samples from my patterns. Ideally someone with a projector, so I can send digital files.

Thanks!


r/sewhelp • • 13h ago

Help with suit jacket lining material

0 Upvotes

I am going to sew a little cropped and fitted women’s jacket with a vintage Simplicity pattern. My main fabric is a poly woven stretch without much 2 way stretch. Can I use a crepe fabric which says had inherent stretch for my lining? If not what should I look for? I would like it to be light weight and slippery. Thanks


r/sewhelp • • 21h ago

💛Beginner💛 Best way to dry 3 yards of wool fabric?

4 Upvotes

This is a follow up to a previous post I made about washing wool fabric.

I decided I’m going to hand wash my 3 yards of wool fabric in the tub. My only issue is, idk the best way to dry it. No dryer obviously. This is a big piece of fabric, and I don’t want it to get weighed down and stretched out during its drying process. Whenever I hand wash stuff, I usually wrap it in a towel to get the water out, then hang dry. Would this be good to apply here?


r/sewhelp • • 14h ago

Thread snapping. Nothing helps

1 Upvotes

I am trying to sew with a pfaff select 4.0. Everytime I start a stitch the upper thread snaps with tension set at 4. I lowered the tension to 1 and then it tangled up underneath. I then threaded and stopped after running through tension discs and before I pull it back up the path to the take up lever. I lowered the presser foot and pulled and seem to pull smoothly. When I finish threading the rest and put the foot down, it is much harder to pull and looks like it wants to bend the needle back.

What could be happening? I am nearly positive the bobbin is threaded correctly and I have changed the needle. I am using the correct needle in the correct orientation. I'm also using guterman thread. It just keeps snapping when I start sewing.


r/sewhelp • • 1d ago

💛Beginner💛 Is this worth it?

Thumbnail
gallery
51 Upvotes

Hello was just hoping to get an opinion I want to get more into making clothes and was wondering is this is a good machine and if it is worth buying at this price range


r/sewhelp • • 16h ago

💛Beginner💛 Sewing shirts

Thumbnail
gallery
1 Upvotes

Bonjour,
Pourquoi lorsque j’ai essayé de coudre des t shirt et pull , les coutures font des bosses alors que je ne tire pas le tissu, j’utilise une aiguille stretch , je fais un point zigzag, je comprends parce que ducoup c’est moche quand je le porte, et au fer à repasser ça change rien


r/sewhelp • • 22h ago

💛Beginner💛 Repair/upcycle Cashmere sweater?

Post image
3 Upvotes

I got a really good deal on this cashmere sweater at my local ralph lauren outlet (I was so excited!) but after wearing it once either I missed the holes when buying or my cats got into it. The front side is perfectly fine, it is a longsleeve.

Either way:

- is there a way to repair this?

- if not, what are fun upcycling projects for this? I was thinking maybe gloves or a headband.

My sewing skills are medium beginner, I have a machine.

Any fun ideas for this? :)


r/sewhelp • • 18h ago

Is this fixable

Thumbnail
gallery
1 Upvotes

Husband tried fixing it himself wondering if I can make it look any better


r/sewhelp • • 1d ago

💛Beginner💛 Cut my skirt slightly too short and hemming issues; any suggestions or opinions for a fix?

Thumbnail
gallery
5 Upvotes

Hello, I’m literally on the last portion of completing my strawberry circle skirt and cut the back a little shorter than i had wanted :(

It’s about 3-5 cm too short.

Other than that, since my out fabric is quite low quality I had originally underlined it which is causing some issues when hemming since it’s effective double layered. I’m having trouble folding the hem.

I have researched a bit on how to fix these 2 issues concurrently;

  1. biastape finish (lining issue + adds slight length) but i might not have enough fabric to make matching ones

  2. trims (adds length + lining issue) but I feel that my skirt might not look that cohesive with a trim?

Any suggestions for this?

Edit: after much thought and consideration, I will probably just head down to the fabric/lace store with the skirt and see what works. Likely looking to do a trim of some sort!

Edit 2: after much MUCH more thoughts, and debating on so many more suggestions, i have decided to opt for a wide, white lace trim finish in the interest of my sanity because I have been on this project since JUNE.

I really wanted a ruffled hem but I think it would not fit this 3/4 circle skirt as well. I’ve also considered a lot of y’all suggestions about treating the lining separately… unfortunately I have already finished all my raw edges with biastape which includes my zippers and pockets…

I think A simple lace would probably be a lot more cohesive visually and good on my sanity because I want to move on😭😭😭😭

Edit 3: I have made the alterations, pics in the comments