r/servers • u/guyxlr • 27d ago
Broken socket?
Do you guys think it’s fixable?
We had boot problems and the company we bought the machine from diagnosed it as a bad socket ( no one has touched the cpu fan since we bought the machine)
We have already replaced this board but I’d be happy to use it around the warehouse or as backup
The machine is being used as a media server for live events
4
u/mineshop 27d ago
Can you share what symptoms you actually saw, since "bad socket" from a vendor could mean bent pins, a cracked substrate, or just a guess without teardown photos?
1
u/guyxlr 27d ago
There are a few bent pins, it had problems booting up and then suddenly boots up perfectly
I flashed a new image from the supplier and started installing everything back on it, it crashed after a few minutes while installing a driver for a usb audio Interface1
u/mineshop 27d ago
Given the bent pins, does the crash still reproduce when you run a memory stress test for an hour, or does it only fail under that specific driver install?
1
u/guyxlr 27d ago
2
u/AutomaticAffect4333 27d ago
Do all of the memory sticks get recognizesnin bios? If so - make a linux mint install usb and run the memtest and see if it throws any errors
1
u/Slasher1738 27d ago
I'd just replacement the motherboard. It's too hard to debug these type of issues. Could be a solder joint, a cpu pin or the DIMM socket.
You may be able to limp along and not populate certain DIMMs






8
u/Rocannon_ 27d ago
i wouldn’t use an unreliable MB in any sort of production environment.