r/s10 • • 3h ago

Advice Is this normal or something I should check on?

Post image
9 Upvotes

For reference, the truck is a 1995 GMC Sonoma with the 4.3 V6. The oil pressure when idling at a stop or parked is low, sometimes even lower than this. But when I'm driving it sits a little over 40. I've never had "fluctuating" oil pressure on any vehicle I've owned and was wondering if this is a sign of an issue. I haven't any other issues with the truck, it drives great.

I've heard from other posts that this can be caused by using oil that's too thin. The oil I use is 5W-30 which was recommended by someone I talked to on this sub. Should I switch up the oil or check mechanical components?


r/s10 • • 4h ago

Repair Question 93 Chevrolet S10 se traba el freno de tambor trasero izquierdo como a unas 500 millas después de ajustar el conjunto del tornillo de ajuste?

Thumbnail reddit.com
1 Upvotes

r/s10 • • 10h ago

Discussion Road Trip

Thumbnail
gallery
12 Upvotes

My s10 is a 97 2.2 5 speed and was wondering how far others have taken their pickup. Have been thinking about taking mine on a 300+ mile trip. What should I look into before taking it so far.


r/s10 • • 11h ago

Repair Question Wiper Delay Upgrade question

4 Upvotes

I have a '90 S-10 Base, Standard Cab, 2.5L, Manual, 151k miles, with a non-tilt column.

I'm working on getting everything working properly as it was just a beater for my brother and he only put about 3k miles on it in the last 10 years and never drove it at night so there were a number of things that needed replacement and maintenance.

I replaced the turn signal switch and flasher module to get the turn signals working again but the wiper switch slot that actuates the turn signal switch seems to be worn and the stalk hits the steering column housing before left turn engages.

The wipers "work" but they don't return to resting position and the mist wipe doesn't work either.

Since I need to replace the wiper switch and the motor and there's a minimal cost difference I would like to add Delay functionality but the only switch I can find on the various parts stores with Delay is for the tilt column. I am not currently changing out the column.

Does anyone know what the difference between a tilt and non-tilt wiper switch is? Are they interchangeable? Is the harness just slightly longer for the tilt or something along those lines?

I know from several forum threads on s10forum.com that it's a fairly straightforward upgrade but they all seem to also either be adding tilt or already have tilt.

Any thoughts or advice?


r/s10 • • 1d ago

Advice $1k 4.3 v6 manual 4x4 1996 w/196k clean title mechanic special worth it?

Thumbnail
gallery
35 Upvotes

Looking at scooping this up local to me tomorrow with cash. Have driven around parking lot, tomorrow highway to confirm all 5 gears.

Hard to lose money here right? Windshield rust bubbling on roof and b arm seems to be worst situation due to bad seal… ran obd but forgot to read code, so will tomorrow.

Able to drive to Emissions and inspections tomorrow morning as well offsite using their dealer tag lol Would just be for fun truck in the mountains and fix a few things then sell next summer maybe.

Mini truck budget/first high school truck market hanging in there to safely pick this up tomorrow and spend a somewhat safe $1k? I had a 97 Chevy 2 door c1500 2wd in high school otherwise out of truck market for a bit.

New battery already, check engine light wasn’t on Friday but was yesterday idling. Audible exhaust leak and windshield bubbling….. Door jams and rockers no rust. Surface underneath. Thoughts? Cool American racing wheels. Radar blue… last registered 2/2026 15 miles away


r/s10 • • 1d ago

Repair Question Vacuum line identification

Thumbnail
gallery
6 Upvotes

While fixing the busted dried out vac line that fixes the foot well vent control, the line circled in the photo cracked on me. Does anyone know what this line is?

This isn't the fairly common problem of the 5/32 line that leads to a T junction and canister on the driver's side. This line leads under the manifold to the passenger side and towards the firewall.

2000 2.2l 2wd s10

Has (broken) AC


r/s10 • • 1d ago

Advice 4x4 blazer rear end price check

4 Upvotes

Looking at an unknown mileage g80 disc break rear axle for my open diff s10 it’s the 3.73 and 7 5/8 with 28 spline axles. Guy wants 350 I’m not sure what a fair value is.


r/s10 • • 1d ago

Repair Question What the hell does this mean

5 Upvotes

So recently, my battery shorted out, and I had to replace it. Since then, when I turn on my dash lights and outside lights, the lower dash lights (turn signals, brights, etc) waver even though they aren't on, same with my headlights

Any ideas what i screwed up?


r/s10 • • 2d ago

Repair Question Curious if anyone else has seen/had this happen. Sheered the bolt right off the power steering bracket! Low fluid? pump seizing? 1992 2.5L Thanks!

Thumbnail
gallery
4 Upvotes

Scenic breakdown spot at least!


r/s10 • • 2d ago

Repair Question Winter start ups

4 Upvotes

First winter with my 98’ Blazer, and of COURSE, the electrical gremlins come out to play when it’s cold.

Usually it takes a few tries to start up when it’s a cold start, but now it takes about 15 times to crank up because it doesn’t spark properly.

Tweety bird also decided to start chirping in my engine bay since it dropped to 40°, anyone else having this issue and found a solution? 😂 It’s unfortunately my daily.


r/s10 • • 3d ago

Discussion My s10 blazer was saved toad by my bike rack

Post image
28 Upvotes

Epic. Very happy my car was not damaged, rip facebook rack it was well lived


r/s10 • • 3d ago

Poll Found this blue s10 around town and I wanted a photo next to mine. What front end was better though? 98-04 or 95-97? I like my 98-04 front cause its like a mini first gen silverado.

Post image
77 Upvotes

r/s10 • • 3d ago

Aftermarket Parts Customer at work gave me his old belltech lowering springs and lowering blocks for free

Post image
19 Upvotes

r/s10 • • 5d ago

Repair Question Tortion bar help

Thumbnail
gallery
12 Upvotes

Hey y'all, I'm currently experiencing my own personal hell with these torsion bars. Anyone have any advice on how I can get them out? I've unloaded them with the special tool and at the back of the bar it's loose and I can wiggle it around. At the front where it sits in the control arm it's totally stuck with no wiggle. I've read I need to push the lower control arm up to further reduce the load on the bar but how far up is enough? None of the manual instructions don't tell me to remove the upper control arm but I'm going to have to if I want to push it up anymore.

I've tried multiple positions while air hammering and nothing so far.


r/s10 • • 5d ago

Showing off my ride Finally put inner fenders/wheel tubs in my truck and mounted the steelies on!

Thumbnail
gallery
132 Upvotes

Previous owner cut the fenders horribly so still some areas that are open but I feel much more comfortable to drive it in the rain now. Also that’s a floor mat for the splash shield lol


r/s10 • • 5d ago

Advice Suspension work

3 Upvotes

I'm trying to swap my leafs and shocks out for coilovers. Looking for a shop in the South Jersey area that does this kind of work and is familiar with s series. 2001 GMC sonoma


r/s10 • • 6d ago

Showing off my ride I have a 1999 chevy s10 34k miles red perfect condition someone offered me 10k for it i turned them down

1 Upvotes

r/s10 • • 6d ago

Discussion Late 80's s10 blazer value

3 Upvotes

I see people trying to sell late 80's early 90's s10 blazers for around 5k$ but they seem to be listed for a while. What I'd a realistic price to pay for a this model in running condition with around 150,000 miles?


r/s10 • • 6d ago

Repair Question 1991 4.3l oil cooler o rings

4 Upvotes

1991
S10 P/U
2wd
Auto
4.3l
Trying to track down the oil cooler o rings. I contacted the company I bought the radiator from and the company that manufactures the radiator and I’m not hearing back. Every time I think I find them online, the sites say they will not fit my truck. These have to exist somewhere please help


r/s10 • • 6d ago

Aftermarket Parts Bagging a buddies dime

Thumbnail
gallery
148 Upvotes

Bagging my buddies ext cab with a Nfamous 3 link in the rear and Nfamous a-arms up front. Still in the mock up phase with just the notch partially welded in.


r/s10 • • 6d ago

Discussion 5.3 Swap

3 Upvotes

New to this and just starting to gather info.

Curious what axle swap and transmission to run and maybe the hiccups I might face on that part?

2002 and will be used as a daily/street car not lowering


r/s10 • • 6d ago

Advice Help with radiator

Post image
4 Upvotes

Does anyone know what no spill coolant funnel kit adapters fits on this? Ive tried mine but none fit Its For a 2000 s10 with the 4.3


r/s10 • • 7d ago

Aftermarket Parts Sub placement

3 Upvotes

I have a 92 single cab s10. I wanna fit a 10inch slim sub somewhere in there. I have an old gun rack behind the seat I could use somehow but I’m not sure. How have yall mounted them? And what has worked in your case?


r/s10 • • 7d ago

Repair Question Dashboard replacement?

4 Upvotes

I recently bought a 91 s10 blazer. The dashboard was super cracked, so I took the dash off in hopes of fixing it, but it's way too far gone to repair. Does anyone know where I could get a used dash? I haven't been able to find one anywhere locally.