r/ruger • • 21m ago

Harrier 5.56 ideas

1 Upvotes

Hello all. I would like to pause on my handgun collection for now and build a nice 5.56 AR starting at a Harrier platform. I believe I want to start with a Ruger Harrier, but make several upgrades. I know I’ll want FRT so adding a new buffer and possibly BCG will be needed but if you have a Harrier project, could you add some photos or ideas? I’m not looking for a long range set up so I don’t need a powerful scope. I’ll more than likely use a red dot. Adding a ridiculous number of attachments is completely welcome as I’d like a front grip, flashlight/laser, (Ambi) trigger kit, etc, etc. Thanks for having me!!! TIA!!


r/ruger • • 4h ago

Ruger x Magpul

Post image
24 Upvotes

Definitely enjoying this collab


r/ruger • • 8h ago

Just plinking around

Post image
48 Upvotes

Got a bone stock 10/22 and a dead air RXD22Ti; simple, fun, and cheap. I’ve got a handful of guns, and at the end of the day, this is the first thing I’m reaching for. Semi-new to the 10/22 scene, was an AR platform freak for a while. Any recommendations on aftermarket upgrades would be nice. Enjoy the weekend, y’all! 🍻


r/ruger • • 22h ago

Roger Predator Gen 2 308

Post image
0 Upvotes

Does anyone borescope a brand new barrel to see how the finish is?
New gun zero rounds shot by me.


r/ruger • • 1d ago

Legacy EHG grip

Post image
61 Upvotes

Just received today!

I wish I had the 13-round mag and the pinky extension. The grip is nice and is textured all over, kinda like S&Ws, which I like compared to smooth. The grippy parts are rougher than I expected, but in a good way that grips kinda like sand paper without being so harsh. I like the two-tone look with this one, I hadn't seen one yet. It's very small, it's certainly not much different size-wise than the Ruger grip. The big difference is in the grip. The EHG is very straight in the grip where the Ruger had curves. I like how this one fits my hand. I also like that the length of the grip is all one width, rather than narrowing toward the end of the barrel like the Ruger.

I'm excited to take it to the range soon.


r/ruger • • 1d ago

Ruger American predator 6.5 Boyds stock

Thumbnail
gallery
29 Upvotes

This is my gen 1 RAP

- Boyd’s stock
-stock 4-12 vortex scope
- cheap bipod
-cheap rubber slip-on bolt handle

Pinky nail groupings at 100 with hornady eld-x

I hate the action on this rifle, the magazine is trash. will likely be my next upgrade and the bolt is loud as hell. But boy does it shoot straight. Let me know if you have any recommendations.

Overall I enjoy this rifle a lot for hunting, I have a lot of confidence in my shot placement. It was quite a joy picking this up after muzzleloader season


r/ruger • • 1d ago

RXM got an upgrade today

Thumbnail
gallery
17 Upvotes

Installed the OSIGHT SE today using the DPP Titanium plate and it’s exactly what I was looking for. Wanted to go the plate route to eliminate the gaps in the optic cut and one that was aluminum for durability. Great that DPP offers one for my setup. Fitment was tight for the plate, but everything was flush before mounting the optic on it. Torqued to DPP’s specs and the result is clean. Can’t wait to run it at the range!


r/ruger • • 2d ago

Finally got a Gunsite Scout

Post image
117 Upvotes

Been wanting one of these for a long while, found it used in a local FFL. Unfortunately someone had “unscouted” it and removed the rear sight and rail. Threw a cheap vortex I had on it and a lonestar silencer and it’s a fun range gun!


r/ruger • • 2d ago

My 2026 Deer hunting rig

Thumbnail
gallery
53 Upvotes

Ruger American 350 Legend paired with a vortex copperhead (which I believe came paired with the rifle when my dad bought it) I’ve killed two deer so far with this gun and I can officially say Ruger is awesome. Ignore the Walmart sling, it’s a placeholder for now lol


r/ruger • • 2d ago

M77 Tang Safety sight add on

2 Upvotes

Has anyone ever gotten sights added on to there rifle? I have one that I got from my uncle and I’d love to have some back up sights on but curious on how much it cost to get it done?


r/ruger • • 2d ago

I’ve heard good things… I’ve heard bad things.. Only one way to find out

Post image
79 Upvotes

r/ruger • • 2d ago

Ruger American Gen2 300 blkout - muzzle device

2 Upvotes

Has anyone had any luck removing the muzzle device off the barrel of this gun? I can not for the life of me remove it. Ive soaked it in water, boiled it, took a torch to it and nothing... plan was to take it hunting this weekend after sighting it in. Any suggestions!?

Please help!

Update: used Kroil and let that soak in over night. Muzzle brake popped right off!


r/ruger • • 2d ago

Bipod?

Post image
26 Upvotes

Mounted the scope and bubble level, sighted in at 100 yards. Struggled with a sandbag, now I want a bipod. Sling mounted picatinny rail plus bipod or a bipod that mounts to sling stud? I would appreciate suggestions.


r/ruger • • 2d ago

New Volquartsen Black Mamba TF. Basically a Mark IV

Post image
58 Upvotes

r/ruger • • 2d ago

Got my grandfathers 1957 blackhawk. The cylinder doesnt always spin when the hammer is cocked. What could be the cause? Would rather not mail this one to be fixed since id like to keep it as orignal as possible.

Post image
19 Upvotes

r/ruger • • 2d ago

Finally joined the PC Charger club!

Thumbnail
gallery
68 Upvotes

I’ve always wanted a Ruger PC Charger, and I finally had the opportunity on Sunday. Couldn’t be happier with how things are coming together! So far, I’ve added a Strike Industries Checkmate, Strike Industries Oppressor, Vortex Defender ST, and Magpul MOE-K2 grip. I’m also planning on adding an Olight PL-X with a Magpul Cantilever Rail Light Mount. Still figuring out the best way to put everything together, but I’m really enjoying making this one my own. And It fits perfectly inside a ukulele case!
BTW, looking for brace options.


r/ruger • • 2d ago

10/22 Takedown Latch Engagement Question

Thumbnail
gallery
5 Upvotes

Still pretty new to the 10/22 world but picked up a takedown model. I noticed with a little force I’m able to override the latch. Looking a bit closer I noticed my latch barely seats into the block it sits in.

Any insight on if this should sit deeper and if so what tweaks do I need to make? I have already loosened the dialed behind but it didn’t impact the position any.


r/ruger • • 2d ago

How’d I do? New to me Ruger 5.7!

Post image
49 Upvotes

Just won this in a raffle from a LGS! Ticket cost me $25. How’d I do haha. First Ruger, excited to mess around with this gun and experience 5.7x28. This damn ammo is expensive!


r/ruger • • 3d ago

Any firsthand experience with the sharp bros walnut stock heat seeker chassis?

3 Upvotes

I was gonna go all in with a woox chassis till I saw this one and love the look of it way more


r/ruger • • 3d ago

Wheelgun Wednesday

Post image
115 Upvotes

Finally ran into the 7 shot I've been missing at the lgs


r/ruger • • 3d ago

Are aftermarket Mini-14 Sights necessary?

Post image
38 Upvotes

What is the consensus? This is a 300BLK for self-defense purposes only. I have resisted the Hannibal Rail and Optics. TechSights Mini-14 Iron Sight is highly recommended. Should I replace my Ruger Iron Sights when I only plan to use it 100 yards or less?


r/ruger • • 3d ago

PCC render from GTA 6. First game I've seen the PCC in, I thought it was worth posting.

Thumbnail
gallery
137 Upvotes

r/ruger • • 3d ago

Ruger M77 Hawkeye Alaskan Bush Rifle in .35 Whelen

Post image
44 Upvotes

Really disappointed that Ruger has discontinued so many of its classics. I’m glad Lipsey’s released this exclusive M77 Alaskan Bush Rifle in .35 Whelen before they disappeared. I would’ve loved to have gotten my hands on one in 9.3x62mm. Fortunately, I was also able to add an M77 African in .270 Winchester to my collection. It’s a damn shame seeing rifles like these disappear.
Pictured is my .35 Whelen Alaskan Bush Rifle equipped with a Leupold VX-5HD Gen 2 2-10x42 FireDot Duplex scope, Leupold rings, and an Armageddon Gear Hunter’s Rifle Sling.


r/ruger • • 4d ago

Cannot wait to backyard snipe this thing!

Post image
60 Upvotes

Went in to pickup a transferred Polite Society Verdict 7.62 and couldn’t leave without this new Ruger!