r/rollerblading • • Apr 01 '22

endless frames question

Seeing a lot of posts using endless trinity frames with a 4 wheel setup. I really don't get it. What's the point? You just end up with extra 5-10mm between the wheels and the boot, negating the advantage of the trinity frame in the first place.

0 Upvotes

25 comments sorted by

•

u/AutoModerator Apr 01 '22

Reminder: r/rollerblading is a community for bladers of all skill levels, disciplines, and backgrounds. Hate speech, personal attacks, harassment, trolling, or breaking any of our other subreddit rules may result in a permanent ban. If you see comments that violate our rules please report them.

Be sure to check out our spin-off subreddits:

r/aggressiveskating

r/rollerbladingmemes

r/inlineskating

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

8

u/F1nnyF6 FR1 Endless 100 | Intuition Apr 01 '22

Sorry? How does using a 4 wheel setup negate the benefits of trinity? You're still closer to the ground than you are with the same frame on a 165 boot. And you still get the extra power transfer with the three mounting points.

So the answer is: people are using endless on a trinity mount because endless frames are great, and people like their trinity mount boots. I really don't understand the framing of the question.

5

u/[deleted] Apr 01 '22

I think he means because it accommodates a larger setup in 3 wheel mode, it’s a compromised design not making full use of the trinity advantage. I.e why not get a dedicated 4 wheel setup. Anyway IMO, the whole argument about being a fraction lower to the ground is a bit overstated anyway.

1

u/F1nnyF6 FR1 Endless 100 | Intuition Apr 01 '22

Perhaps you are correct, if so that is also true for literally any endless frame, so the question is basically just why get an endless frame?

1

u/the_only_way_is_UP Apr 01 '22

Beats me. I'd rather have them in 4x100 with out the possibility of 3 wheel setup, just to save some mm :)

7

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22 edited Apr 02 '22

I just pulled up my CAD models of the Endless 100 Trinity design to see if the ride height could be reduced if the 3-wheel setup was deleted. You would only save 0.9 mm. Wearing different socks may have more of an effect. :)

When I designed the Trinity frames I designed for compatibility across the entire Powerslide product range for boots that range in size from 35 to 48. The bottom contours of all boots and sizes were considered along with boot/wheel/frame tolerances when setting the ride height. So while the frame may look like it has a certain clearance on a Next boot, that clearance will be different on something like the Swell or Tau, for example. Also the point of minimum clearance may be in a different location.

I hope that helps clarify!

2

u/the_only_way_is_UP Apr 02 '22

Thanks! This is really helpful for skating nerds like me.

2

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22

You’re very welcome! I’m glad it was helpful.

2

u/the_sun_and_the_moon Powerslide Arise RD Apr 01 '22

Because they look sick as hell!

2

u/Acbaker2112 Powerslide Next Core 80 || Endless 100 Trinity || UC Raw Apr 01 '22

And they’re cheaper than other “Wizard” options

1

u/F1nnyF6 FR1 Endless 100 | Intuition Apr 01 '22

I agree, check my flair. You are talking to a proud endless 100 owner and massive endless shill 😜

1

u/[deleted] Apr 02 '22

I guess depends on your skating style. I have two similar frames in 4x100 and 5x80 (ROKA and Rockin) and they are fun as hell. But most of the time I like to skate fast non stop urban and prefer a basic quality flat 4x90.

0

u/the_only_way_is_UP Apr 01 '22

Yes, exactly this! I think iqon solved it nicely. Also look better imho.

3

u/F1nnyF6 FR1 Endless 100 | Intuition Apr 01 '22

Isn't the iqon even taller than endless? Or at least the same height, considering the 90mm iqon also has a 3x110 setup?

1

u/the_only_way_is_UP Apr 01 '22

No, since the 90mm are higher in the frame than the 110mm.

4

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22 edited Apr 02 '22

This is a good question that pops up from time to time. I wanted to chime in and offer some insight into my design. Here are a couple articles that address the question of ride height and “isn‘t the 4-wheel setup compromised because of the 3-wheel setup?”

For 165 Frames:

https://help.endlessblading.com/article/32-ride-height-compromised

For Trinity Frames:

https://help.endlessblading.com/article/64-is-ride-height-compromised-on-trinity-boots

As u/Wheel-Sure mentioned, the Endless 90 LR Trinity offers an option to those people that insist on having the absolute ride height achievable in a 4x90 setup.

While developing all the different frames we’ve put out, I’ve found that a millimeter or two rarely changes my skating experience (nevertheless, I always work to carefully optimize ride height for each design). The wheelbase, wheel size, and rocker have a bigger effect on how the skate behaves for me…and thus my fun factor. One thing to consider is that having the ride height really low can affect how often the boot scrapes when carving or crossing over on a deep edge or doing a slide.

If anyone has any other specific questions about the Trinity frames just let me know!

1

u/WookieMC Shop Task // Wizard Skating // SORCE Apr 02 '22

👍

3

u/Wheel-Sure Apr 01 '22

I think it’s more about the rocker than a few mm of height. How many other pre-rockered trinity mount 4x90 and 4x100 frames are available?

There’s also the Endless 90 LR Trinity which uses a 3x100 instead of 3x110 to get it even lower.

It states:

“This frame has a lower ride height than the standard Endless 90 TRINITY Frame when used with the 4-wheel setup, providing the absolute lowest 4x90 TRINITY setup on the market”

I have both Endless 90 and Endless 100 frames, both in 165 mount. Even still, I had the same reaction to trying to accommodate a triskate configuration and how much additional height would result from it, but it’s not adding much.

I’ve actually got some 110 wheels delivering tomorrow so I can try the 3x110 setup on my endless, even though I don’t think I’ll like it lol.

They’re great frames. Built well and another option for larger wheels with a rocker.

1

u/Acbaker2112 Powerslide Next Core 80 || Endless 100 Trinity || UC Raw Apr 01 '22

I just put 110s on my endless 100 trinity for the first time yesterday. I quite liked it for cruising around town and I felt so much more stable hitting hills, very smooth and fast.

FWIW I’ve never used another triskate set up, so maybe ignorance is bliss. But I really enjoyed the change of pace and feeling.

4

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22

Glad to hear you gave the 3x110 setup a try on your Endless 100. I designed the 3-wheel setups on these frames for exactly the application you mentioned: cruising, distance, hill bombing, trail skates, etc. It was always meant to offer a nice counterpoint to the playful agility of the 4-wheel Balanced Rocker setups. Have fun!

1

u/Acbaker2112 Powerslide Next Core 80 || Endless 100 Trinity || UC Raw Apr 02 '22

Hey, It’s cool to see you around this sub. After another outing on the 3x110, I have to say I’m having a lot of fun. It feels a bit closer to skiing, with the long wheel base. Almost like I couldn’t fall forward or backwards if I tried. Definitely a bit “stiffer” and less playful, but so fast and smooth. I’ve only been skating for 8 months, but this was the first time I actually felt improved power transfer that people talk about so much. Keep up the great work!

1

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22

Cool! Yeah once you get those wheels out past the end of your toes and heels you really gain some serious front-back stability. In general I try to avoid skating any setup that looks like an upside down triangle. That ”stiffness” that you noticed is the reaction force of road and wheels when you are pushing. That’s how you know you are about to go fast. :)

I find if I’ve skated the rockered 4-wheel setup for an extended period of time exclusively and then go back to the 3-wheel flat setup it can feel a little jarring at first. There’s usually an adjustment period where your muscle memory needs to recalibrate. But if I’m swapping setups on a more regular basis then that adjustment period becomes quite short for me…just minutes usually. I feel swapping setups like this helps me become a more versatile and stronger skater. Not only am I working different muscles, but my skills improve as well.

2

u/Wheel-Sure Apr 01 '22

Yeah it’ll be my first triskate or 110 skate. I know I don’t like flat frames. I need my rocker! The other reason I haven’t tried it is because it’s a longer 3x110 frame than I’d want to try as my first triskate, so it doesn’t seem like it really matches the spirit of what 3x110 is trying to achieve: high speeds but short wheelbase.

But… I might as well try it out. Variety is the spice of life and all. I’ll try it on my Endless 90 first since they’re shorter than my Endless 100.

Hopefully I’ll be pleasantly surprised as well and maybe start doing more distance sessions or something in addition to my urban/city skating.

2

u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22 edited Apr 02 '22

I support your growth mindset. :) I think triskates wheelbases can be whatever length the designer feels suits their application. I’ve always struggled with shorter triskate setups personally, since as a rocker wore in they felt twitchy and less stable. If I want super maneuverable I’d rather have a 4-wheel rockered setup personally. When I’m on a long trail skate, however, I love the feeling of having mini locomotives on my feet. I want each stride to give me as much push and stability as possible. The 3x110 setup on my Endless 90 ES frames is my current favorite (291 mm) on my size 40 FR1 skates. The maneuverability feels fine, but I get a lot of energy transfer on each push from the long wheelbase.

1

u/Wheel-Sure Apr 02 '22

That all makes sense, and fair enough that there isn't a "canonical 3x110 setup". I suppose I always just pictured for example the 230mm frame that comes on the FR1 310. But then again the Rollerblade Twister Edge 110 3WD comes with a 255mm frame. Other models depend on the size you buy etc.

And I've had the same thought about a 230mm triskate frame getting a bit squirrelly, once a rocker is worn in. Sounds like we have similarly sized feet. Mine are 265mm and I skate FR1 Deluxe Intuition size 40.5-41.5.

I've had these Endless frames for a year and I need to actually try any of these setups before forming an opinion of them, so it's time to give the 110's a roll. I'm eager to experience mini locomotives on my feet :)