Hi everyone,
I’m new to Resolume Arena and trying to set up audio-reactive visuals using audio playing internally on my Windows laptop. I’m on the trial version and this is my second day trying to get it working.
I’ve managed to get audio into Resolume’s external FFT, so this isn’t a case of getting no audio input at all. My problem is that the FFT becomes inaccurate and eventually stops responding.
My setup:
Windows laptop, Resolume Arena trial, VoiceMeeter
SoundID Reference (virtual audio processing for my headphones)
I’ve selected VoiceMeeter Out B1 as Resolume’s audio input device. In Windows Sound Settings, I’ve set VoiceMeeter Input as the default playback device and VoiceMeeter Out B1 as the default recording device. These were the only devices showing activity in Windows’ sound settings when I tested.
In Resolume, I’ve enabled FFT input, increased the input gain, and tried buffer sizes of 512 and 1024. For external FFT, I’ve tried channels 1, 2, and both.
The actual problem:
When I play audio, the FFT initially responds, but:
The spectrum display doesn’t accurately reflect the music. I can hear kicks, snares, and other distinct sounds, but the FFT shows an inconsistent, seemingly random curve.
After a few seconds, the levels gradually drop until the FFT disappears, even though the audio continues playing at the same volume.
Toggling the external FFT/input settings off and on in Resolume temporarily restores it, but the problem repeats.
Interestingly, routing my microphone through VoiceMeeter works perfectly and consistently. The issue seems to happen specifically with audio from music players.
I also have another problem: Windows volume keys stop working when VoiceMeeter Input is selected as the default playback device. I have to adjust volume in the music player or VoiceMeeter itself.
I suspect my routing might be fundamentally wrong, especially with SoundID Reference also installed, but I’m struggling to understand which devices should actually be used. VoiceMeeter’s many virtual devices are confusing, and most tutorials I’ve found are outdated.
I’d really appreciate someone explaining the correct routing for this setup, or pointing out what might cause the FFT to decay despite continuous audio playback.
I can provide screenshots of my settings if needed. Thanks!