r/reloadingcanada • • Jan 26 '15

Titan Reloading

0 Upvotes

Nobody had spare turrets locally. Titan's price including shipping (USPS) was about what the locals were charging. Small dollar value so it just showed up in the mail box a few days later. Will have to try a larger order and see if the logistics hold. Nice to have options.


r/reloadingcanada • • Feb 28 '18

Reloading reloaded cases?

2 Upvotes

I just picked up a full reloading set for 9mm, Ive got some Hornady and Nosler brass put aside that I know is going to be fine to reload but then I also have 3-400 cases with various brands that are from reloaded cartridges from Wolf and XMetal. My question is would it be safe to use these cases to reload or is it not recommended.


r/reloadingcanada • • Jun 14 '18

Reloading .223

2 Upvotes

I've got about 500 rounds of .223 that are once fired (by me). I'm wondering about reloading them and is it really worth it. A friend at the range says his buddy can reload .223 for about 450.00 a thousand which is what I paid for these. Can it be done cheaper then that?

Also all of the brass I have has a little dent right before the neck. It happens after it's been fired as it's not there when I load the mag. If it matters I'm using a Aero Lower with a DPMS trigger group and an complete upper from Marstar.ca (10.5") and also a 11.5" complete upper from Maple Ridge Armoury and it happens to both uppers.

Thanks


r/reloadingcanada • • Mar 17 '15

Finally got down to work...

Thumbnail
imgur.com
3 Upvotes

r/reloadingcanada • • Nov 26 '17

Wife let me have a room to myself, finally got it setup the way i want it

Post image
9 Upvotes

r/reloadingcanada • • Sep 19 '21

Visit our website for Axis Precision Worx products in Canada. Precisionzone.ca insta: @precision_zone facebook: precisionzoneCA

Thumbnail
gallery
6 Upvotes

r/reloadingcanada • • Apr 22 '19

Lead Cast 30-30 loads with 9gr. of Trail Boss

Post image
9 Upvotes

r/reloadingcanada • • 26d ago

What are you loading this hunting season?

5 Upvotes

With hunting season here for most areas I’m sure we’re all loaded and ready.

What hand loads are you hunting with this fall?

I’m carrying 7mm-08 with 140gn TTSX. Originally I tried BL-(C)2, but I’ve now settled on Varget. It’s for whitetail from 30-200 yards, so I think it’ll do fine.


r/reloadingcanada • • Mar 28 '22

Powder - Rifle smokeless powder

5 Upvotes

Hey gang, I'm new at reloading and was just wondering if it is always this hard to get smokeless powder?
I've been trying to get h4350 for my 30-06 or some powders around the same burn rate. But it seems like there is hardly any or that they never come back in stock. Has it been like this for a long time or just since covid?

Thanks for any answers


r/reloadingcanada • • 2d ago

Barnes 140gn TTSX in a 7-08

Thumbnail
gallery
9 Upvotes

Apparently ttsx 140gn with Varget in a 7-08 rem at 50 yards work on deer. With no snow this year and with a lot of cougars around I took the shoulder shot. Definitely anchored it right there. I hit the upper leg bone about 2 inches below the scapula joint.
I’m no scientist but I feel like there was plenty of damage and the bulled seemed to preform better than a cup and core bullet. If I used a cup and core I think I would have seen more jacket material in the wound channel. Leading me to trim more meat “just in case” And this bullet seemed to smash the bone and continue straight as if it wasn’t deformed at all by the bone.

Winner in my book. Now that I have the load made up, I see no reason not to keep using them.


r/reloadingcanada • • Nov 15 '18

First 100!

Thumbnail
imgur.com
14 Upvotes

r/reloadingcanada • • Jun 15 '18

I bit the bullet!

10 Upvotes

So after a few weeks of research I finally bit the bullet and picked up a bunch of reloading gear. Man is the CC taking a beating!

Hornady Press Lock-N-Load AP EZ-ject Auto-Progressive
Hornady 223 FL 2-Die set AM series w/ S/H #16
Hornady Lock-N-Load AP Shellplate #16
MTM primer flipper
Lyman E-Zee trim pilot (.223)
Lyman E-Zee Trim hand case trimmer
Frankford Arsenal Bullet puller

I already have calipers and a scale (it measures in grains and was used for a few years for reloading by my uncle). About the only thing I'm missing is a tumbler of some sort, gun cleaner & lube and case lube. I'm looking to use some new brass and the old brass I may just run through the dish washer in a delicates bag. I've heard that can work pretty good. If not I'll get a tumbler.

I'll start out doing single stage and after I've got the hang of each one I plan on progressing to more and more stages. I just want to make darn sure that it's putting the primer in right and the right amount of powder before going full out.

Is there anything I've missed?


r/reloadingcanada • • Apr 09 '21

Basic reloading Series

10 Upvotes

Hi guys, just wanted to share a reload video series that I'm working on.

Basic Reloafing

I keep all the failures in the videos to give you an honest idea of what the hobbies is really about, my editor loves to mock me so there's plenty of little jokes scattered throughout the videos, and, I use tools that are easy to find.


r/reloadingcanada • • Jan 30 '21

Your favorite source for reloading kit

5 Upvotes

Not a tone of action in this Sub, I'm guessing it's due to the popularity of the sister sub.

Anyways here goes, what's your favorite Canadian source for reloading equipment or supplies?

Ive been using budgetshooter but the shipping is killer. Used xreload a few times and they have good deals and prices, but run out of stock instantly so you have to be on the ball.

What's your go to places.


r/reloadingcanada • • Nov 22 '19

Bullets - Cast I cant move without leaving a little surprise in the wall, now can I?..

Post image
16 Upvotes

r/reloadingcanada • • Feb 03 '19

I had one cartridge out of four have some "issues" during this load development. Can anyone help me identify the problem? Bottom right spent case has a raised edge around the circumference and the head stamp seems distorted.

Post image
4 Upvotes

r/reloadingcanada • • Mar 24 '19

Bought a 30-06, realized i love shooting, also realized i can't keep spending $100 a week in ammo

12 Upvotes

I'm looking to get into reloading to offset my shooting habit, but i'm not sure where to start. this Lee kit?

I'd be reloading only 30-06 (the only other things i shoot are 12ga and .22).

Mostly i'd be loading cheap stuff for the range, but i'm also interested in finding the exact right cartridge for my rifle (which is a cheap entry level rifle so it's mostly just an exercise in optimization).

Any advice or tips you guys might have would be appreciated, particularly with regards to keeping the cost of brass down (it seems i can't find cheap brass anywhere).


r/reloadingcanada • • Aug 16 '19

Anyone looking to move from a Dillon XL650 to the newer XL750, or Super 1050?

3 Upvotes

https://www.dillonprecision.com/reloading-machines_8_1.html

I have an automated setup that uses the Dillon XL650, so if anyone is looking to sell a lightly to moderately used XL650 in working order, send me a DM. I'd be especially interested in the Calgary/Lethbridge/Medicine Hat area, but would not say no to a motivated seller from anywhere in Canada.

Don't forget to ask your buddies that don't reload much anymore.

Thanks all.


r/reloadingcanada • • May 20 '18

Wet tumbling in bulk

4 Upvotes

https://imgur.com/gallery/PSB0nlF

Instead of spending $275 on a small wet tumbler, I went big... Canadian tire had a sale on cement mixers... I live in a downtown apartment however, so this will sit in my bathtub for processing and ease of hot water access. A bit ridiculous but I'm single and its a perk of being able to process 10000 cases of 9mm in one go. Now tumbling will become an annual thing for my handgun calibres that I have more brass than I shoot a year.

Anyone else gone this route? Did you rubberize the inside of your drums?


r/reloadingcanada • • Dec 18 '19

Wet tumbling - So just started wet tumbling with steel pin media and the results are unbelievable. Here’s what my water looked like after cleaning brass that had ALREADY been cleaned with my old sonic cleaner.

11 Upvotes

r/reloadingcanada • • Jan 07 '16

Powder - Other Rusty wood has a bit of alliant in stock.

4 Upvotes

http://www.rustywood.ca/powder.html

It's going real fast though.


r/reloadingcanada • • Feb 23 '16

Advice required: Reloading 7.62x54R (read inside, important details!)

2 Upvotes

Hello fellows,

Thank you for taking the time to read this, especially if you're not here to tell me I've lost my marbles and am trying to do something stupid :D but read on, because this is not really as crazy as it seems. Now, you're likely wondering "W H Y ?" and the answer is... I am not actually reloading live rounds. Here's the reason:

I am an avid fan of militaria, a collector, and an airsofter-reenactor hybrid (pretty much most of the intricacy of reenactment, but with the added option of emulating some highly specific units due to the availability of replicas). I have been irked by the fact that myself, and other milsim reenactors, cannot complete kits and decor elements due to a lack of certain accessories, because nobody makes them.

Stripper clips for Mosin-Nagants, Dragunovs, or AKs? Nope. A belt for the museum reenactor with the Maxim gun? Nope. Belts and ammo boxes sitting in trenches or by MG nests? Nope. Photos and kits that miss important details? Betcha.

So for that reason, I have decided to take immediate action. A contact of mine will supply the 7.62x54R steel-link belts for the Maxim/PKM. Several gracious shooters whom I have approached have supplied me with their once-fired 7.62x25, 7.62x39, and 7.62x54R casings. I have done research on the matter, but still feel like I need some advice from experienced reloaders.

I plan to mainly reload a lot of 7.62x54R due to the sheer volume I need for belts and stripper clips, and do about 500 7.62x39 for stripper clips. I'm sure most of the casings I will get are going to be lacquered/copper-washed steel with Berdan primers.

I have read that the 7.62x54R shares the same bullet diameter with the .303 British, whose metric dimensions are 7.7x56R. It also shares the same diameter with the 7.7 Jap (7.92m). The differences are in case mouth diameter. So I was thinking, since 7.62x54R projectiles are impossible to find unless I pull ammo apart, I'd rather go with sizing the neck and seating a .303 FMJBT in there. I was looking at PRVI .303 FMJBT projectiles which are relatively cheap, $38/100 piece bag.

7.62x39 projectiles I have a lead on to, and will probably load with PRVI as well since they're cheap and aren't going anywhere except on displays.

The casings will be injected with a squirt of resin to render them virtually irrecoverable, so that nobody may be able to repurpose them for malicious intent. The only process I am adamant on doing as squarely and visually pleasing as I can is the seating of the 7.62x39 and .303 in the casings. No powder, no primers, just good-looking dummy rounds.

Is there any advice you could offer me? My friend and myself are willing to invest in super-basic single-stage table press, maybe a Lee entry-level. What would you recommend for presses, dies, lubricants and procedures? What should I look out for, apart from the risk of getting casings stuck on the die?

Thank you for reading so far, any help will be appreciated!


r/reloadingcanada • • Jul 15 '15

It's a reloader thing, you wouldn't understand...

Thumbnail
imgur.com
4 Upvotes

r/reloadingcanada • • Jul 17 '19

Clean rinse makes em shiny

11 Upvotes

r/reloadingcanada • • Nov 12 '19

Some fresh noslers to test out 8x57.

Post image
9 Upvotes