r/raspberryDIY • • Sep 14 '26 Mindblown Bravo

I made a digital wigglegram camera.

Thumbnail
gallery
2.4k Upvotes

I’ve been working on a DIY digital wigglegram camera using 4 Raspberry Pi Zero 2W and 4 Pi Camera V3 Wide.

The 4 cameras capture at the same time with around 1/1000 sec sync accuracy, then the images are aligned and processed into a wigglegram.

No AI interpolation, just 4 real frames from slightly different viewpoints.

The result has a pretty cool 3D effect. It almost feels like you can look into the photo and step inside it.


r/raspberryDIY • • Jun 26 '26

This kit let's you make a customisable phone using as Raspberry Pi CM5.

1.0k Upvotes

This is a kit being sold for $240 on which you can attach a Raspberry Pi CM5 and it becomes a fully functional Blackberry like phone with manual buttons. There are some adaptors you can buy separately to add in other functionalities. Source: https://youtube.com/shorts/X58R0j4aEWA


r/raspberryDIY • • Jun 21 '26

I made a thing!

875 Upvotes

I made a thing and I’m really proud of it. It’s a scanner/sorter for MTG cards. It runs off a Pi 3b+ and an arduino. I’m not an engineer or programmer, so it’s mostly put together with thoughts and prayers, but it works! It’s running about 99% accuracy and real-world of about 4 seconds per card. I can change what goes in each bin and it’ll export a CSV to upload to your favorite app. There’s also preset sorting patterns I can save. When the bins get full it prompts you to empty the bin. Right now I have it sorting my mono-black bulk by type and rarity. It pulls out any card worth more than $2 I can sleeve it up.
I had an old hobby laser I salvaged the stepper and rails from and designed it on Fusion. All things considered, I’m pretty happy with it.

**UPDATE**
Due to the level of interest in this project, I’m going to work on a YouTube channel so ya’ll can come along on the journey as this thing progresses. Thank you all for your encouragement and support. I never expected this to be so popular and it’s given me the motivation to work on the 2.0 design. More to follow as I make the new channel.

**2nd UPDATE**
I’ve got the YouTube channel started @Timprovised. I just posted the first video showcasing the GUI if you’re interested.

https://youtu.be/9JX8J1ihZH4


r/raspberryDIY • • 19d ago

My Raspberry Pi Camera Final Build (R1 Mini)

Thumbnail
gallery
520 Upvotes

This will be a super long read so to those who get to the bottom then thank you!

Over the past month I have been working on this design and I now feel like it’s in a position where I can share how it was built, firstly I want to say that this is not a tutorial, there are a couple of things with the design that work ok after some tweaks but could be redesigned to work right after printing, therefore I want to treat this as a “how it was built” vs “how to build” post.

Exact specifications of the camera are as follows:

Case size: 100mm x 100mm x 100mm
Battery: 10,000mAh Mophie Powerstation
Camera module: Arducam IMX477 HQ
Mount: C/CS
Power output: 5V USB-C
Buttons: Sleep/Shutdown, FPS, ISO, W/B
Mainboard: Raspberry Pi 5 - 4GB RAM
Storage: 16GB SanDisk Micro SD
Ext Storage: Over 100mbps USB3.0 drive
Display: Waveshare 4” 720x720 HDMI
Battery life: Approx 8-9hrs idle - 5-6hrs Rec
Tilt sensor: MPU6050 accelerometer
Cooling: Raspberry Pi 5 Active Cooler

General design:
All parts were modelled in Autodesk Fusion with parts I mostly had on hand, I had to take extra care in adding ventilation to the correct places as I found the plastic to warp slightly if it got above 60 degrees, with the active cooler it now sits at no higher than 50-55 which is just on the limit but I haven’t encountered any issues so far. The battery sits on a “shelf” that is connected to the left side panel for easy access if disassembly is needed, a small cutout for the flat USB-C cable was also made so it also firmly holds the cable in place when removing or reinserting it. All side panels were made with a -1mm tolerance again for easier access when removing and M2 threaded heat inserts were used for all screws except the camera module. The Pi 5 and displays motherboard sit on another shelf at the bottom of the case which should allow for I2C usage for the screen (I couldn’t get mine to work for some reason but the pins align perfectly so I believe my unit may be defective for I2C), this allows for a cleaner design and lets the Pi sit higher for better cooling and IO access.

Assembly:
After all parts were printed, I installed M2 threaded heat inserts into the mounting points for the front, left, right and rear panels, also adding an additional 4 inserts for the display board and Pi 5 to screw into the case. The order of assembly was preparing the panels with their correct components such as for the front panel, screwing in the camera module and soldering the Dupont wires to the 3.3V Filament LED and press fitting it into the cutout at the top. I added a small drop of superglue to the wires to prevent them from pulling on the LED just in case. There is room to store any excess cable underneath the shelf that the Pi is mounted to so nothing should pinch against the case, I also made sure to connect both the USB-C power cable and HDMI to Micro HDMI adapter to the Pi (the adapter comes with the waveshare display and also fits perfectly as you can use the standoffs from the screen) and attached the displays USB-C power cable and routed it under the shelf at the bottom. The front panel was then able to be mounted using the 4 M2 screws.

I then moved to the rear panel as I needed as much access as possible for the GPIO pins so I left the side panels and display till last, I attached the 4 buttons and the USB-C output to the rear panel, for easier assembly I used a 60mm x 10mm magnet and attached all ground wires to it leaving one Dupont cable ground wire for the GPIO to prevent having too many cables in the system, all other cables were then routed to their correct GPIO pins, the USB-C output jack simply uses the 5V and any GND GPIO pin. Just for fun I also added a small vibration motor from an Xbox controller trigger to create a small haptic when a button is pressed or when a USB drive is inserted but this does need to be mounted to a part of the case and not a side panel. I then routed the cables as neat as possible in front of the GPIO (Making sure no wires come into contact with the active coolers fan) and mounted the panel to the case exactly the same as the front panel.

I then moved onto installing the display, out of the box the display and driver board are attached with very strong adhesive, I removed this from my unit so they were separate as it now sits under the pi, this is an EXTREMELY difficult task and I advise to take extra caution if you are to try this as you do run the risk of destroying the screen, the display also doesn’t use the typical DSI ribbon cable that connects to the pi, so you will need a 51-pin extension cable with a 0.3mm pitch followed by an adapter to reattach it to the screen. The extension cable can be routed again under the display board through the shelf so it comes out of the front of the unit and behind the camera module. For easier assembly I attached the extension cable to the driver board and then left the adapter attached to the screen. I then peeled the adhesive backing off and seated the screen into the top of the unit making sure to attach the cables in their correct orientation.

The left side panel was now ready to be installed making sure to insert the 90 degree USB ribbon cable from the display board into the lower USB2.0 Port on the Pi and flat USB-C cable from the Pi through the hole on the side of the battery shelf, this way the battery can be installed from the right side ensuring a snug fit once assembled, I left a very short amount of cable before sliding the battery in to make sure it had a cleaner look. (When sliding in the panel I had to make sure not to snag any cables including the display ribbon cable, I went through the right side of the unit to lift the display cable above the battery so it wouldn’t pull on them when it was slid into place. (I printed a small cover as seen on the left side of the unit to cover the USB plug for the screen)

Finally the right side panel needed to be prepared, this has a cutout for an extension button that connects to the Pi’s power button, this is where my design was slightly flawed, under load the Pi will sit at anywhere from 50-55 degrees, so as I printed my parts with PLA, I started to see the button warping and no longer making contact, I chose to print the button from ABS although I could have tweaked the design to make the button baseplate thicker as it is quite thin, however I haven’t seen any warping since using a different material. Since the button pivots up towards the Pi’s button, there is a small plastic block that holds the button in place at the very top of the button baseplate, this was mounted in the centre but again the button did not work correctly, since moving the block it works perfect every time.

Software:
The system runs ApertarOS which allows for easy external button management and also rotary encoders if you want to add any other accessories, it also features a Web GUI, WiFi management, multiple camera module support including IMX477, IMX585, IMX294 etc… and a magnitude of other features, to see everything related to the software check out their GitHub page as there has been so much development and time spent on making the software what it is now. There is great support for it too, any issues I encountered during setup or making adjustments were always solved by the community. The software is also updated fairly frequently to bring even more new features and bug fixes runs very smoothly on a 4GB Pi, Apertar do say you can potentially use a 2GB Pi but this is best used as a photo only camera.

https://github.com/Apertar-Studio

I made some tweaks to the software to map the buttons to their correct functions and GPIO pins, added a custom splash screen for the logo of my camera on startup and shutdown and also added the cameras name in the metadata of the images.

As mentioned above, there is a small vibration motor attached to the unit, this was made as a separate service on the Pi to detect button presses and emits a small 130ms pulse when a button is pressed, holding the ISO button for 2 seconds will send it back to “Auto” and subsequently the vibration motor will emit a 230ms pulse to indicate it is complete. When inserting a USB drive into the Pi again the motor will emit 2 400ms pulses. (Of course during recording the motor is disabled to prevent any frame shakes)

The status light also has a few functions such as blinking during recording and turning on and off when pressing the power button at the back. I removed the blinking during photo capture as it made no sense to have it anymore.

The power button at the back runs on a separate script, pressing once will make the display go into a “sleep mode” and pressing again will wake it up, as mentioned above the LED also turns on and off with the display, pressing and holding for 3 seconds will perform a safe shutdown on the Pi.

The supported resolutions for the IMX477 are 1332x990, 2028x1080 and 2028x1520, this is a limitation of that certain module, the IMX585 and IMX294 are both to my knowledge capable of 4K output. In 1332x990 and 2028x1080 modes you can select from 24,25,30,50 and 60 FPS however in 2028x1520 you can only select 24,25 and 30 FPS, again better modules will support higher framerates.

You also get the option to take still images as RAW DNG, PNG, TIFF, JPEG or to add a RAW DNG to any other file type. Video mode records in cDNG stills which can be compiled and edited through Davinci Resolve.

The camera also supports input and output devices although I have not tested them yet, I believe on my camera they will work through the USB3.0 ports.

As a final touch I added button labels to the back of the unit and a serial plate to the side with the Pi information, mount type, build date and revision number, then installed the Smallrig cheese plate to the bottom of the case, this is attached by 2 1/4-20 screws.

Again I would like to say I don’t class this as a tutorial but rather how I built it, if you decide to build one for yourself please DM me and I will be more than happy to send over the STEP files but please keep in mind that I have made some changes to the parts post printing so there are some things that may fit different or need tweaking. Also if I have missed out anything in this post please ask away in the comments and thank you for the positive feedback from my previous two builds! I will add pictures from the camera in the comments soon.


r/raspberryDIY • • Jan 25 '24

I used 17 Pis to make a giant arcade game (project diary in comments)

487 Upvotes

r/raspberryDIY • • Sep 13 '26

Survival CyberDeck

Thumbnail gallery
452 Upvotes

Muito bacana essa montagem.


r/raspberryDIY • • 25d ago Bravo

My Revised Raspberry Pi Camera

Thumbnail
gallery
449 Upvotes

I posted my first camera build around 1 month ago and I never expected it to get so much attention! Thanks to everyone for the comments and advice too, I have decided to take it on board and implement it into my second design.

The features are near enough the same as the last design, such as:

\- Quick access buttons
\-Built in 10,000mah battery
\-ApertarOS
\-5V USB-C Output

However there are a lot of changes, I noticed on my previous posts about the crop factor with an EF lens adapter and this is true, it was difficult to take pictures with the old design as I’d have to stand extremely far away from anything I was trying to capture, to sort this I now have the standard C/CS mount with headroom for any adapters compatible if needed.

The camera body, front and side panels were all modelled from scratch so I could properly implement the parts I had on hand, it came out great with a .16mm setting on my 3d printer, the only downside is that I used 90% infill for all parts which took up more print time but still overall was around 10 hours for everything (printed with PLA Matte bone white and charcoal).

The ambient light from before is now more useful too, it sits slightly above the camera sensor and now tells you certain information such as a recording flash indicator, blinks when a picture is taken or on during no recording or photo capturing.

The cheese plate from before is also no longer hidden or used up by the battery as it’s now internal, so I was able to reposition it to the bottom of the camera for a much sturdier mounting solution.

The 4inch Waveshare display is also integrated into the case which makes the unit a lot easier to use and faster to set up, it was a bit of a pain carrying the screen separately and with manual focus lenses it was a must to integrate it into the body.

Thanks to Apertar Studios’ fantastic work on the firmware, I was able to also add a gyroscope to the camera for levelling, this works fantastically and it only needs a one-time setup.

Once again this is a hobby project, I will soon upload pictures from this camera but they are not studio quality or ultra high resolution as this is still only the IMX477 module, but certain lighting and colours are still vivid and can look fantastic for a certain look or aesthetic.

If you have made it this far then again, thank you! I’d love to hear what else can be added to this so please give me more suggestions!


r/raspberryDIY • • Jul 21 '26

3d scan rig with raspberry pi + openscan3 firmware

258 Upvotes

r/raspberryDIY • • Aug 12 '21

Got my first Pi a week ago and build a "case" on a budget.

257 Upvotes

r/raspberryDIY • • Sep 20 '26

CinePi. A whole new revision. Thoughts?

Thumbnail
gallery
241 Upvotes

Making my own cinema camera from scratch. Inspired from CinePi project.

What it can do?

\- OPENGATE / 4K / FHD / HD Shooting video/photo

\- Arri style, 1/4" threads for mounting system

\- 3.5mm external microphone, headphone

\- Full-size HDMI for external monitor

\- Internal 720×720 touch LCD preview monitor

\- Interchangable SSD support for storage.

\- Internal battery 18650 \* 3 ups

\- SONY IMX477, IMX585, IMX283 SUPPORT!

Plans

\- Full opensource the project, including hardware, electronics, software.

\- Might try to make full-aluminum body using CNC.

\- Trying to make a video about the entire process building this camera.

Share your thoughts and feel free to contact me.


r/raspberryDIY • • Aug 18 '25

Took my homemade Raspberry Pi camera into the studio

Thumbnail
gallery
214 Upvotes

After a couple weeks of tinkering, I built a DIY camera and finally brought it into the studio to shoot portraits with a friend.

It’s a waist-level viewfinder camera (using a Mamiya C220 TLR finder), powered by a Raspberry Pi 5 and a 1" Sony IMX283 sensor. I’ve been testing it with a mix of Fujinon TV lenses and adapted Pentax Takumars.

Here are some shots in good light and low light — honestly, I like the results better than my Sony A7 IV.

If you’re curious about the build, I shared more details (and will be posting full build guides soon) on Substack: https://camerahacksbymalcolmjay.substack.com/p/built-not-bought?r=2n18cl. Feel free to subscribe if you want to follow along as I document these DIY builds.


r/raspberryDIY • • Jan 19 '25

Raspberry Pi 4 Cyberdeck

Thumbnail
gallery
214 Upvotes

Travel kit - RP4 CYBERDECK + RP5 + RPI ZERO 2 + RPI ZERO PWNAGOTCHI


r/raspberryDIY • • Aug 24 '20

Worlds smallest iMac! (Pi powered)

Post image
192 Upvotes

r/raspberryDIY • • Mar 12 '23

Raspberry Pi ChatGPT Voice Activated Smartwatch

180 Upvotes

r/raspberryDIY • • Sep 25 '26

Pi-5 Retro deck buy FITZPATRICK ELECTRONICS

Post image
178 Upvotes

I made this retro handheld using a raspberry pi 5 8GB model. With Batocera ofcorse. With a 512GB nvme. Custom 5s lithium battery pack. Custom 3d chassis using Glass fiber PETG. Check me out on YouTube for the full build FITZPATRICK ELECTRONICS!!


r/raspberryDIY • • Jun 24 '26

My Digital Picture Frame Detects Any Music That's Playing

171 Upvotes

Fun little project I recently built. It's an Inky Impression 13 (Color ePaper) that's powered by a Raspberry Pi Zero 2. It cycles through my photos on the hour (I use the Share Sheet to send the photos to it) but the magic happens when you listen to music. I have a tiny mic attached to the RPI zero 2 and every minute it listens to see if the decibel level of the room is higher than ambient sound. If it is, it uses Shazam IO to see if there's a music match. If it detects music, it shows the album art on the frame and starts listening more aggressively until we're back to an ambient decimal count again where it cools down.

I've been using this for 2 months now (it's wall mounted now) and it works remarkably well. I knew it would work with my HomePods and vinyl but what I didn't expect is that it also detects music from TV shows, sports, ads, and even video games.

Full build video is here: https://www.youtube.com/watch?v=Zy23kl9n1sM

Edit: Sorry for the dark video, reddit was not having it with the HDR


r/raspberryDIY • • May 22 '26

Modular Raspberry Pi Cyberdeck for FreeCAD & Workshop Use (WIP)

163 Upvotes

r/raspberryDIY • • Jun 11 '21

Built a remotely controlled raspi powered roomba in our office that you can control, its in Finland (yes those are sausages as fingers lol) http://srr.gt/clean-ocean

160 Upvotes

r/raspberryDIY • • May 31 '21

Had no way to 3D Print a Gaming Case so i made my own

Thumbnail
gallery
158 Upvotes

r/raspberryDIY • • Oct 14 '26

Gave my old Raspberry Pi 3B a second life as a touchscreen audiobook server

Post image
156 Upvotes

I've been getting more into electronics and DIY tech projects lately, so I decided to dust off an old Raspberry Pi 3B (1 GB RAM) with a touchscreen and repurpose it as a personal audiobook server.

I also gave myself one constraint: use the equipment I already had on hand rather than buying new hardware. I'm aware there are newer and more capable options for running a home server, but part of the appeal was finding a practical use for equipment that had been sitting unused for years.

The project turned out to be a good introduction to Linux, Docker, and self-hosting, with a few unexpected challenges along the way.

The Pi now hosts my audiobook library, automatically launches Audiobookshelf on its touchscreen, and streams audio over Bluetooth to my Fosi BT20A amplifier and bookshelf speakers. I can also access my library remotely from my iPhone.

Here's the setup:

  • Hardware: Raspberry Pi 3B, touchscreen, 32 GB microSD card

  • OS: Raspberry Pi OS 64-bit (Trixie)

  • Server: Audiobookshelf running through Docker Compose

  • Interface: Chromium in fullscreen kiosk mode

  • Audio: Bluetooth to a Fosi BT20A amplifier and bookshelf speakers

  • Remote access: Tailscale

  • iPhone player: SoundLeaf

  • Library management: Libation on my Mac

How I built it:

I started by getting Raspberry Pi OS running and used a combination of Pi My Life Up tutorials and ChatGPT to guide me through the initial setup, installation, and troubleshooting.

I installed Docker and deployed Audiobookshelf using Docker Compose, with separate directories for the audiobooks, configuration, and metadata so the files remain intact even if I need to recreate the container.

Next, I configured Chromium to automatically launch Audiobookshelf in fullscreen kiosk mode whenever the Pi boots, effectively turning the touchscreen into a dedicated audiobook player.

One unexpected challenge was getting the touchscreen to turn off after 10 minutes of inactivity and wake back up when touched, without shutting down the actual server. That wasn't covered in the tutorials I followed, and since I hadn't used the Pi or touchscreen in years, I couldn't find the original manual. ChatGPT walked me through troubleshooting and configuring the display, and I eventually got it working. Now the screen can sleep while Audiobookshelf continues running in the background.

For audio, I paired the Pi over Bluetooth with my Fosi BT20A amplifier, which powers my bookshelf speakers. I also installed Tailscale for secure remote access and configured SoundLeaf on my iPhone so I could stream audiobooks over cellular.

Finally, I set up Libation on my Mac to manage my audiobook library and upload files to Audiobookshelf.

Current limitations and next steps:

The setup is functional, but there are still a few limitations I'm working through. For now, everything is running off a 32 GB microSD card, which isn't a long-term solution for a growing audiobook library. I plan to move the library to external storage.

I've also encountered some issues transferring larger audiobooks from Libation to Audiobookshelf. Smaller files generally upload without trouble, but larger transfers have occasionally timed out. Uploading directly through Audiobookshelf seems to be a possible workaround, although I'd still like to identify the underlying issue.

I'm relatively new to Linux, Docker, and self-hosting, so this project has been a useful introduction to all three. There's still plenty to learn, and I'll continue refining the setup as I get more comfortable with the technology.

I'd be interested in hearing from anyone running Audiobookshelf on older Raspberry Pi hardware, particularly regarding performance, storage, and reliability. I'm also open to suggestions for improving the setup, preferably without replacing the Pi itself.


r/raspberryDIY • • Feb 17 '22

I made a pico ducky to change windows wallpaper! It's very funny.

155 Upvotes

r/raspberryDIY • • May 15 '21

Supervised installation

Post image
149 Upvotes

r/raspberryDIY • • Sep 07 '26

Rasberry Pi build

Post image
145 Upvotes

Hey everyone, I’m building what’s called a paludarium for my house. It’s a mix of an aquarium and terrarium together.

I’m looking for someone to build me something that can monitor and control the environment. Specifically the things below

Monitor humidity from 5 different points in the tank. Use the average of them to control a misting system.

2 fans that will remain on but turn off when misting. Then back one 5 mins after mist is complete.

Monitor water temps and control heater

Monitor water PH

Monitor water level in sump and auto fill when low.

Monitor water level in top off reservoir and notify me when low.

Control automatic fish feeder on a schedule

The tank itself is massive, as you can see! So the sensor cables will all need to be at least 15-20ft.

I’m not tech savvy and honestly just don’t have the time to try on my own. Let me know if this is something you’ve done before or can do. Thanks


r/raspberryDIY • • Aug 13 '26

Home Network Adblocker Question

Post image
145 Upvotes

i'm working on my first project, and I wanted to build an ad blocker for my home network. I already am purchasing a 3B+ with the power supply and microSD from PiShop. My big hurdle right now is finding a display that I can put on it and a case to go along with it. I generated a photo for a proof of concept for an idea of what I'm going for. If anyone has any ideas on where to find a display and case that will help me achieve this, that would be awesome. It's my first project, so I'm in a little over my head, but I would feel so good if I pulled this off.