r/photoclass2021 • • Apr 01 '21

18 - Better gear

48 Upvotes

To become a better photographer, there is the hard way, this photoclass, lots and lots of practice, trial and error and failed photo's..., but there is also an easier way.... and that is getting the best gear.

think about it

Getting the best possible camera and a good collection of lenses is a sure guarantee for a huge increase in quality. The bigger megapixel sensors, the sharper lenses with bigger apertures, the narrower depth of field all allow you to make the best possible image of any situation.

Besides the basics, you'll also be needing a couple of flashes, some strobes, some modifiers and a nice collection of filters and gels. These are there to add light where and when you need it so you're no longer reliant on weather, natural light and other difficult situations. But you can't just use one flash, you'll need a couple at least to have every chance of being creative and achieving the wanted results.

But it doesn't stop there. you can continue learning by UPGRADING your gear the moment new stuff come out. This technique is called Gear Aquisition System or GAS for short and is, imho, the best way to progress. This is especially important on a day like this!

But why? do you ask? Better gear will just make you a better photographer. It's a little like a self fulfilling prophecy. The bigger camera combined with the heavy lenses make your brain work differently. You'll improve the moment you spend the money and the more you spend, the more you'll improve. Better ingredients make for a better meal and if you get Cod it's going to tast like Cod but if you get the magical aprils fish, you get the best meal you've ever tasted, weither you can cook or not.

Anyway, happy fishday to you all :-)

see you soon.


r/photoclass2021 • • Apr 30 '21

Assignment 22 - raw vs jpg

22 Upvotes

One of the defining differences between low and high end digital cameras is the ability to shoot raw files instead of the usual jpg. To really understand what the difference between the two types of file is, we need to go back to the components of a camera. As you may remember from that lesson, a digital sensor is only a grid of photo sensitive receptors, and the result of an exposure is just a big bunch of numbers corresponding to the light level recorded at each pixel. This does not make a visible image yet, as a number of steps are still required before it can be viewed. In particular, obtaining colour information for each pixel needs a process called demosaicing, but you also need to apply white balance, a contrast curve, sharpening, saturation and possibly some other treatments, for instance noise reduction.

black and white

There are two ways to perform this. You can either let your camera do it for you, with minimal input, resulting in a file ready to be viewed, usually in the standard jpg format. Alternatively, you can tell the camera to do as little as possible and perform each step yourself at a later point, with dedicated software.

JPG has the obvious advantage of simplicity. There is no need to spend additional time in front of a computer. In this sense, it can be viewed as an extension of the auto mode, which definitely has its uses.

Another point is that the manufacturers designing the image processing pipeline know the camera internals best, which (at least in theory) enables them to get the most out of the sensor.

Tiger in Antwerp Zoo

Raw, on the other hand, is a complex beast and will require additional effort from the photographer. There are, however, significant benefits: since you have manual control, you can get the absolute best of your file, and have much more latitude to adjust the image to your personal vision without a degradation in quality.

In particular, you can set white balance, contrast, saturation and sharpening to any value you desire in post-processing, allowing you to experiment and evaluate precisely the consequences of each decision. There is also much more leeway for exposure, with the ability to recover about half a stop of details in highlights and shadows compared to a jpg.

RAW also gives you the option of multiple edits of the same photo. You might try black and white processing but later on decide you want to see how it looks in colour. If you only have the black and white JPG, it's impossible to put it back in the original colours, but with RAW, you can always go back and change your mind, or make mulitple versions of an image to fit your need or purpose. It adds a layer of creative freedom, of possibilities.

This album shows this. I've taken one RAW file and made 8 different edits of it using just the basic settings pannel.

RAW files are much bigger than their equivalent jpg brothers, and they also come in proprietary formats – a source of big concern to many photographers. A standard exists, called DNG, and there are tools available to convert your raw files to DNG, but sadly, as of 2010, Pentax is the only major manufacturer to allow shooting directly in DNG.

Since the whole point of raw files is that they are not directly viewable, you will need dedicated software, called a raw converter. This can be a major hassle if the converter is not well integrated in your library software, but if you use modern software such as Adobe Lightroom, Darktable for Linux or Apple Aperture, the raw conversion step should be perfectly transparent and will require no extra effort on your part. We will discuss these issues in more detail in a later lesson.

Dayna made up by "moeders mooiste"

Whether you should shoot raw or jpg is one of the big issues of digital photography, and very strong opinions exist on both sides. What it comes down to is what your ultimate goal is: if you need to produce volume and want to reduce post-processing time to a minimum, then well calibrated jpg should be satisfactory. If on the other hand you care about getting the best possible image quality and are willing to spend at least some time in front of a computer, then use raw.

I would go a little bit further, and advise any new photographer to shoot raw unless they have a good reason to use jpg. The big advantage is that, like with film negatives, you can always come back to your old files with new software, new experience and new vision and reprocess them to better results.

Generally speaking, it is well worth spending the time (and money) to learn how to incorporate raw into your image workflow (which, again, we will cover later).

family

assignment here


r/photoclass2021 • • Jul 16 '21

34 - Lightroom 1

8 Upvotes

This one has been asked for many times over so I've decided to add it to this years photoclass. Now, this is my personal workflow (/u/Aeri73 ) and far from perfect or complete, it's just the way I use it and why.

Lightroom is just the software I use. Darktable is an alternative that is free, there are others. Just look for photo organizer or raw editor or cataloguing software.

Step one: importing

When a card is loaded in the computer lightroom opens the import photo dialog. This is how it's set up:

Lightroom importing

  1. where lightroom finds the photos to import. Eject after import is handy as otherwise you have to do this manually.

  2. Photos that are greyed out have already been imported, use the buttons 6 to select all or unselect all, use shift to select multiple files, check those you want imported. I just import them all, you can always delete unwanted files later.

  3. Render previews: minimal saves on space but you need a faster system to make it work. Don't import duplications is a good option to set. Make a copy to allows you to backup the raw files to a second folder or preferably drive. Below that you can rename photo's, I never use that.

  4. develop settings allow you to develop the photos in mass during import. This can be handy for just basic editing or really fast work.

  5. allows you to set keywords to photos. Do this, every time, it helps with finding photos later on. The better the keywords, the more effective your catalogue will be. Destination is where you set the target of the import. I use a foldername that describes the shoot or use the customer name if it's for a client.

  6. select or deselect all photos

  7. via import presets you can quickly set a certain combination of settings for the import. I have presets for weddingphotos, journalistic work, personal photos and other situations that demand a different import set. Personal photos go to different foldersystems, weddings have backups to different drives, journalistic work gets batchprocessed and so on.

click import to start importing your photos.

This will do 2 major things:

  1. it will make one or more copies of the raw files and save them on your computer

  2. it will add the photo to the library, create a preview image and set meta data to the photo

Lightroom library

Now you are in Lightroom and you should see your photos being imported. This can be really fast if you import from a drive, it can be slower when using a slower card for example.

What do we see?

  1. is your library, not explorer. Only folders that have been imported are visible and accessible

  2. use this menu to go the other modes in lightroom. Develop is where you edit, map is for location data, book I don't use, Slideshow neither, Print allows for printing and web is for gallery creation. I only use library, develop and Print.

  3. your histogram with the photo settings below it (when the mouse is not over the photopreview)

  4. use presets to edit photos. one or multiple photos

  5. set keywords to individual or multiple photos. typ them below the list, not in the list.

  6. Filter images on bases of flags, colours, stars and so forth. I use this a lot.

  7. Set the preview to : grid of photos, one photo, before and after view or multiple view (last one is just great for selection), set or remove flags, stars and rotate the photo

Develop

When you click develop you'll see a preview on the top left, below that presets (quickly setting a collection of developmentsettings), in the middle your image and than on the right the development pannel. the pannel, all closed up

The first thing you see is the histogram, leave this open at all times. Below it are the exif data, below that some adaptions:

  • Crop tool: aspect allows for precise aspect ratios, click the bar just left to angle and drag a line that should be straight to rotate or drag outside the frame. drag the corner to go from vertical to horizontal crops. tip: close the lock before changing anything and it will remain closed, open it first and all next resizes will be without aspect-ratio set, change size first and it's only for this photo you release the aspect ratio.

  • spot removal: scroll to change size, click once to remove and let lightroom find a reference, click and drag to do this manually.Use clone or repair depending on result, del to undo, drag borders to change site, drag second circle to try a different reference spot

  • red eye tool: click on the eye, drag sides to change size

  • graduated filters: click to set the "horizon" and change the settings of only one side of a photo

  • adjustment brush: same as graduated but you use a brush to paint where you want to settings to happen

End of part one. Next class will be develop mode itself.

assignment here


r/photoclass2021 • • Jul 02 '21

Weekend assignment 21 - work of art

10 Upvotes

Hi photoclass,

This weekend your assignment is to be inspired by an other work of art. You can try to remake it, try to integrate it in a photo of yours, you can change it, use it, create something inspired by it, that would fit next to it, hell you can destroy it if you can do it legally and ethicly, ,the only thing you can't do is just make a photo of it.

post your inspiration and your results and be sure to credit the original artist


r/photoclass2021 • • Jul 08 '21

Assignment 33 - Dam and Backup

11 Upvotes

your assignment for today is to back up your files :-)

really, go do it now!


r/photoclass2021 • • Jul 23 '21

35 - Lightroom 2

11 Upvotes

Develop mode

The develop mode is the place where you will edit the photos. You can edit one by one, or use groups of photos. You can also edit one photo and synchronize (selected) settings to other photos. This is where lightroom shines but other programs allow for this as well.

Although they might have different names, most of the settings I'll explain today can be found in other programs and will work in the same way (more or less) to have the same effect. This is because most of these changes could be done in a darkroom as well so all software programs will have the same names for the same effects.

General workflow

In the lightroom develop mode I tend to work from top to bottom. I am not strict about this however, and will go back to change settings if I think it's what the photo needs. Working from top to bottom generally gives the best results.

Overview

The photo we are going to edit is in the center of your screen. if you have multiple screens you can also put this on a second screen for a bigger view.

On the right of that you'll find the develop toolbar with the histogram, info about the photo, acces to some tools and the developing tools, starting with basic.

Use the histogram to understand what you need to do. On mine you see that the 3 colours are way off, the image is blue and greens are underexposed... we'll fix that later.

First steps

The first thing I'll do is crop the photo. remove spots, red eye (If I ever have it). Graduated filters and local adaptations break the top to bottom rule, I do these after the basic edit.

Now it's time to start editing.

First step: white balance

click the eye drop tool, click somewhere in the photo where there is black, white or grey in the scene. This will make lightroom change the white balance so that that spot becomes white black or grey in the photo as well. If it doesn't have the results you where hoping for, click a different spot or use the sliders to manually change it. There are limits, so if you reach the end and it's still not ok, go black and white.

You turn a photo black and white by clicking black and white :-)

after cropping and white balance correction, our image looks like this

Next step: Tone

In tone you'll change how the photo looks. you'll change the light, colours, tones and things like contrast. Again here I'll work top to bottom.

On our photo the exposure looks ok. the darkest spots are near black, the brightest spots near white and I'm not losing any information. So I'll leave exposur for what it is (at the moment)

Next is contrast. Contrast will spread the histogram to make darker things darker and brighter things brighter. Adding contrast will add pop to an image, make it look a bit harder. Removing contrast will make an image softer, make darker and brighter things in the photo more even

our photo with high contrast

our photo with low contrast

High contrast is way over the top here as the image had a lot of contrast to start with. Low contrast looks a bit better but too flat for my taste, so I'm going to sttle at -21

Next up: Highlights, shadows, whites and blacks

These add or remove light to specific parts of the histogram. Alt+click on the slider to see where the image changes exactly.

I use these to make the image feel like I want it. This can go either way depending on what effect I'm looking for. I'm not afraid to play with them, try out different things, experiment. And neither should you. Doubleclick the word tone and all is reset to 0

What I do a lot is lower highlights ,up shadows, up whites and lower blacks. This will bring out detail from the image but keep contrast.

A trick is to alt click for whites and blacks and slide untill you just see spots appear.

The result

Next up: Presence

Clarity is changing the contrast of edges. It makes a photo hard or soft. Be gentle with this, going to extremes might seem pleasing at frist but tone it down a bit to improve :-)

Vibrance changes the colours of certain tones but NOT SKINN

Saturation changes al colours

a nice effect can be to add vibrance but remove saturation, or inverse... it gives a grungy look ,specially with high clarity

This image, I wont change saturation or vibrance, because it's one colour that is giving me the problems, so I'll change just that.

image with high clarity

image with low clarity

**Tone Curve ** This allows you to further change the light in the photo selectivly.

Some examples : S curve : more contrast

extremes can be artsy

HSL, colour and B&W

these allow you to change the luminance, saturation or hue of selected colours. In our image, blue is really bright so i'll tone it down here to bring back some details in the background.

There, enough for class 2, Next up is Split toning

view assignment here


r/photoclass2021 • • Aug 28 '21

Last weekend assignment

11 Upvotes

Hi photoclass

our journy is nearing the end and it's time to put it all together and make the best photo you can of

a window


r/photoclass2021 • • Apr 25 '21

21 - Scene mode vs PASM

12 Upvotes

Except for the most advanced models, all digital cameras sport a variety of scene modes, which are there to help set the parameters of the camera in a way that fits the subject you are trying to photograph. Some that can be commonly found are portrait, landscape, macro, snow, night and sport, but recent cameras take this to absurd levels, with more and more advanced modes appearing. The alternative is to use one of the four “traditional” exposure modes: Program, Aperture Priority (Av on Canon), Speed priority (Tv on Canon) and Manual.

13-01.jpg

Scene modes have a place, as an adequate way of using a camera for people who do not have a good grasp of the different parameters involved in the use of a camera. However, if you have read the lessons on exposure and on focus, you should be well equipped to graduate to PASM modes. There are two major issues with scene modes:

  • They are “black boxes”. There is no documentation anywhere saying “sport mode will try to keep a high shutter speed” or “night mode will increase ISO”. You can make guesses, but there is no way of knowing what really is going on. You are effectively relinquishing all control to the camera and will have little or no possibility to express what your vision for the image is.

  • The exact effects of scene modes vary between manufacturers, sometimes even between camera models. It is far too easy to be surprised by some of the choices, for instance by when the camera will decide to increase ISO and to what levels. The only thing you know about how the camera works when you select the portrait mode is that “an engineer in Japan thinks these parameters will work in most cases for taking portraits”.

  • The other reason is that scene modes are mutually exclusive. You can’t be in several at the same time. But what if you want to take a portrait at night? Or to photograph a kid in a snowy landscape? Knowing which one to choose can be an impossible task unless you know exactly what each mode does, which brings us back to the previous point.

Dayna

Unlike scene modes which potentially modify every single parameter in the camera, PASM modes only concern themselves with two exposure controls: aperture and shutter speed. Let’s review each of the four modes:

  • Program is a sort of “Auto” of exposure modes. The camera picks the aperture and speed it thinks are best suited to the scene, depending on a variety of parameters (for instance, it will usually try to use a safe handheld speed). You still have control, as you can change the picked couple with a turn of the control wheel. If you close the aperture, speed will lengthen, and vice versa. Whether the camera changes aperture or shutter speed when you use the exposure compensation button is up to internal algorithms. Program is a pretty good mode that should be preferred to scene modes if you are still afraid to go into the more manual modes. You don’t have complete control, but at least you know exactly what is going on. It is also a good mode to use when you know you’ll only have a split second to take a shot and want to have sane parameters without having to touch anything.

  • Aperture priority is the default mode of most serious photographers (i.e. they use the other ones only when they have a good reason to). You control the aperture, and the camera takes care of the shutter speed. When you use exposure compensation, the camera will only modify shutter speed, leaving aperture to whatever you have chosen. This is a good mode for most pictures because you usually don’t care so much about what the shutter speed is, as long as it is fast enough to produce sharp images. On the other hand, aperture controls depth of field, which you want to pay attention to in every single image. A good way to take pictures is to set aperture to a default f/8, often the sweet spots of most lenses and giving a generous depth of field, changing only when either the light gets too low for handheld photography (always keep an eye on that shutter speed) or because you explicitly want more or less depth of field.

  • Speed priority is a bit more specialized. It is the exact opposite of Aperture priority: you choose the speed and the camera deals with the aperture. It is useful mostly when you need a specific speed to get the effect you are after. Sport and wildlife photographers in particular use S mode often, as they will need very high speeds (often 1/1000 or more) to properly freeze the action. The big downside of using S mode is that depth of field will potentially be all over the place.

  • Manual mode is possibly the least useful mode of all (though many consider it the purest). You get to fix both aperture and shutter speed yourself, with no help from the camera other than a mention of how off it thinks you are (usually via a set of bars in the viewfinder). This is useful mostly when you don’t trust the light meter for some reason. It is often possible to use exposure lock (the AE-L button) instead of going to manual.

You often find people advising beginners to shoot in full manual mode in order to gain a better understanding of their camera. While there is some wisdom in the advice, it is also a great way to burn out quickly, and there won’t be much advantage over shooting in aperture or speed priority.

empty room to play with

So far, we have only talked about aperture and shutter speed, but not mentioned the third exposure parameter: ISO. All these modes are legacies from film cameras, where it wasn’t possible to control ISO anyway (it was a physical property of the film). Most modern cameras have some form of AutoISO mode, usually enabled in the menus, with various parameters. This, unfortunately, is somewhat of a return to scene modes, as it is difficult to understand what exactly is going on and to gain the control you want (though, to their credit, some manufacturers do explain how their algorithm works).

Since ISO is usually the last parameter you want to change, I would argue that it is best to leave it as a manual control and not rely on AutoISO, but this is more of a personal thing and many photographers have incorporated conservative uses of AutoISO in their workflows.

assignment


r/photoclass2021 • • Mar 21 '21

17 - Depth of Field revisited

13 Upvotes

welcome to part 2 of photoclass!

In this third and last lesson of the “Focus” part of the course, we will revisit the topic of depth of field (henceforth abbreviated DoF), which we already talked about briefly in the aperture lesson. Back then, we were mostly concerned about how DoF is affected by changing the aperture, but we should now discuss how DoF itself can be used as an important creative tool.

If you remember, we defined depth of field as the distance between the closest object in focus and the largest in focus. As we saw in a previous lesson, everything on a plane parallel to the sensor will be in perfect focus. But there are actually two planes, parallel to each other, and everything between them is in focus. The distance between them is our depth of field.

13-01.jpg

For instance, on this image, the first plane is parallel to me and intersects the shelf between the ‘J’ and the ‘E’ of ‘SUBJECT’. The second plane intersects somewhere after the ‘S’ of ‘BIOGRAPHIES’. Since the books are receded, the first one on the right is just behind the far plane, so almost in focus but not quite entirely. Here, DoF is about 5cm.

All we talked about in the previous two lessons is about positioning the plane of perfect focus. Depth of field is about how much we include around it.

young life

Shallow depth of field is an extremely useful technique: by having a really small DoF, we can direct the attention of the viewer to exactly where we want it, on the subject. Background and foreground will be thrown out of focus, still present but much less distracting. This is a technique for subject separation. It also gives images what I can only call a “slick” look. Since it is somewhat difficult to achieve (if you don’t know what you are doing), we tend to automatically consider shallow DoF images as professional, or at least of a higher standard. In the motion world, it is also part of what is called the “film look”, and is one of the reasons the introduction of video capable DSLRs was such a big deal.

  • We already saw that one ingredient for shallow DoF was opening your aperture as much as possible (using a small f number), which is a partial explanation of why some photographers spend so much money on fast lenses. There are however two others factors which are more often ignored: focal length and distance.

  • The actual focal length of the lens (not its 35mm equivalent) is the single most important parameter for achieving shallow DoF. The longer your focal length, the shallower your DoF. This is why big sensors make subject separation easier to achieve, while it is nearly impossible with compact cameras (a bigger sensor means you need a longer focal length to achieve the same angle of view, remember the focal length lesson). So for portraits, privilege longer lenses.

  • The last factor is the ratio of the distance to the subject vs distance to the background. If you want a clear separation, get very close to your subject – which is why macro images like the following one have very shallow DoF. Conversely, if your subject is 100m away and the background only 150m away, you won’t be able to achieve much separation, no matter how big your sensor and your lens.

Just remember: aperture is important, but it’s far from the only factor.

narrow DoF

Shallow DoF is a useful tool, but not one you should be using on every single image (if only because it would lose much of its impact). Most of the time, you will probably want as much of the image as possible in focus. This is especially important with wide angle shots, for instance landscapes. Another instance where you want deep depth of field is when focus is hard to achieve, usually in low light, as it will allow you to make mistakes in the exact position of the focus plane and still get your subject relatively sharp. To achieve large DoF, the simplest is to close your aperture (using a large f number), though you probably want to be careful about diffraction.

There is however a nice trick you can use to increase DoF: hyperfocus. The idea is that when you focus on infinity (which happens frequently), you are “losing” some DoF: everything further than infinity is also in focus. What you can do instead is focusing closer to you so that the far away plane delimiting DoF is just barely at infinity (and not beyond). The distance at which this happens is called hyperfocal, and you can easily find calculators online – you only need to input your focal length and aperture, and it will tell you what the closest distance you can focus to is if you want to include infinity in your DoF. Because it is a bit calculation intensive and hard to evaluate on the spot, use of hyperfocal distance should probably be reserved to tripods and seasoned street photographers.

13-03.jpg

go here for the assignment


r/photoclass2021 • • Apr 25 '21

Assignment 21 - Scene mode vs PASM

14 Upvotes

Please read the assignment first

This assignment is very simple but should also be good fun: take a walk in your city or somewhere you find interesting and shoot pictures. They certainly don’t have to all be beautiful or mind-blowing, but try to make an effort to find real subjects instead of pointing the camera in random directions. Just tell your internal editor to shut up.

There is only one rule: you need to take at least 20 different pictures in each of five different configurations: using scene modes, using program, using aperture priority, using speed priority and using manual mode. So you should have a minimum of 100 pictures by the end of this. It may sound like a lot, but you will probably be surprised how fast you can attain that goal once you get going.

Don't just use them for anything. Use scene modes as they are supposed to be used or use them wrong, use program for a normal scene, use speed priority to shoot moving things, use aperture to get the depth of field right... use them for what they are made and use what you've learned.

Once back home, post your favorite three in here and explain which mode it was taken with. For bonus points, give us your impressions of using each mode and why you prefer one to the other.


r/photoclass2021 • • Jun 15 '21

Assignment 30 - working a scene

15 Upvotes

Please read the class first

For this assignment I want you to go to a nice spot or location with your camera IN YOUR BAG and take an hour to walk around. take a notebook with you and make photos but do it in your mind only... not down where you want to make what photo... scetch it if you are a visual person... or remember...

After one hour, go back to your starting place, repeat the walk and make the photos you envisioned.

do not cheat and make the photos the moment you decided to make them... the hour between them is a big part of the lesson here, it changes the way you'll take the photo.

as usual, post your results and have fun :-)


r/photoclass2021 • • Mar 07 '21

Assignment 14 - metering modes

19 Upvotes

Please read the class first

Today's assignment is different from the original class. In stead of asking you to find your own difficult subject, I'm going to give you some.

The first task is in daylight:

  • shoot a window from the inside out. First try to expose so the outside is correctly lit. (Photo 1).

  • Next, try to get the interior properly lit. (photo 2)

  • Bonus photo: try to achieve both (advanced, don't be disappointed if you can't seem to do it)

try to have both photo's using the automatic metering... don't use exposure compensation, in stead, use the AF lock button if available.

The second part is: Make a photo of something completely white (wall, paper, ...) and try to make it look white on the photo... (photo 3)

the third task is: make a photo of something black (wall, paper, ...) and try to make it look black on the photo (photo 4)

on the last: make the black and white fill the frame or almost entirely.... for best results, have something on the black and white that is not black or white.


r/photoclass2021 • • Mar 16 '21

Assignment 16 - Manual focus

20 Upvotes

please read the class first

In the original photoclass there isn't an assignment for this class but I think practice makes perfect so... here is the assignment.

find something like long grass, mesh, fence, a window with a reflection or partition... and try to make a photo of what is behind it.... try both autofocus and manual focus

if you have windows facing the street:

try to make 2 or 3 photos of the same moving car using manual focus, and autofocus for the next car. try to find what autofocus mode works best for that.

DO NOT go outside if you live in 'infected' area's, photoclass isn't worth the risk of infection.


r/photoclass2021 • • Jan 22 '21

Weekend assignment 03 - trickery

53 Upvotes

Hi photoclass

for this weekends assignment we'll play with what we've learned in the last class.

your mission, should you accept it, is to make a photo that is an optical illusion by making something seem smaller or larger than it is in real life.

you do this by carefully chosing your position and focal length in order to make things seem closer together or farther apart then they are in reality...

for examples, think of the classic tower of piza photos where people lean on a huge multi story tower but you can also go the other way : https://mymodernmet.com/michael-paul-smith-elgin-park/

be creative and have fun :-))

as always, share your work and critique your peers


r/photoclass2021 • • Apr 23 '21

Weekend assignment 16 : a ray of light

21 Upvotes

Photography is capturing light.

for this assignment, I want you to look at only that. the light. Make a photo that has the light as a subject

find a ray of sunshine, glittering reflections in water or a single beam of light shining trough a high window...


r/photoclass2021 • • Mar 16 '21

16 - Manual Focus

22 Upvotes

In the previous lesson, we talked about how to let the camera decide where to put the plane of focus. However, there are many situations where you might want to take over that important task and do it yourself.

Blue

The only practical way of focusing manually is via a ring on the lens. Sadly, manufacturers still haven’t agreed on which of the zoom or focus ring should be closer to the photographer, so there is no general rule, but those two rings should be found on any modern zoom lens. Most lenses and cameras require you to flip a physical switch to alternate between AF and MF. Some modern lenses also offer a very useful M/A mode: autofocus is used normally, but you can turn the manual focus ring at any point to override the camera and take control.

To achieve correct focus, you need a way of evaluating accurately how sharp your subject is. This means that you need to have a viewfinder large enough that small differences in focus will show. Sadly, most entry level DSLRs have tiny viewfinders, and this is one place where higher end bodies will make a clear difference. If you frame with liveview or an electronic viewfinder, you can often ask the camera to magnify the central area, thus allowing very precise focusing, the downside being the slowness of the whole process.

Even when you are in MF mode, the AF sensor will remain active and give you focus information. Just like the light meter tells you when it thinks you have achieved a good exposure in manual mode but lets you decide what to do with that information, the AF sensor will tell you when it thinks you have a well focused image, usually via means of a dot appearing in the viewfinder. Of course, you probably shouldn’t trust it entirely (if you do, save yourself the trouble and go back to autofocus), but it is still useful information to have.

Green

It can make sense to use manual focus in the following situations:

  • If your autofocus system is not up to par or if your subject is too complicated. This can happen for instance in cases where you have multiple objects at varying distances which could each equally well be your subject. The camera will try to guess which one you want to focus on, but it can’t read your mind. Focus and recompose in single AF mode can be useful here, but it is sometimes simpler to just switch to MF and take full control.

  • More generally, as soon as you won’t want to focus on the obvious subject, switch to MF. For instance, you might be shooting a car race but want to focus on a detail of the road in front of the moving car. Chances are that your AF system will see this big thing moving fast into the frame and assume this is what you are interested in, losing the focus from the road.

  • In street photography or other situations where your subject might be moving very fast and you only have a split second to get the shot, you can use MF to prefocus on the place where you expect the subject to appear. This is a favourite technique of Leica shooters in particular. To use it, you simply need to find an object at roughly the same distance than your expected subject, focus on it (wiuth either MF or AF), then go into MF mode and wait for the decisive moment.

  • As we discussed in the last class, AF systems can’t work very well if there is not enough light. You probably won’t be able to manually focus precisely either, but you can use the distance scale found on all but the cheapest lenses, making an educated guess as to the distance to your subject. When the AF system “hunts” without any result (tries the whole range back and forth, then gives up), you should either switch to manual focus or abandon the image altogether.

  • Finally, the last case is for careful tripod shots. With a good viewfinder or a magnified liveview, manual focus is much more precise than any autofocus system, so for those who want the absolute best out of their images, MF is a good option.

red

be sure to try the assignment


r/photoclass2021 • • Feb 10 '21

Assignment 09 - Aperture

23 Upvotes

Please read the class first

Today’s assignment will be pretty short. The idea is simply to play with aperture and see how it impacts depth of field and the effects of diffraction. Put your camera in aperture priority (if you have such a mode), then find a good subject: it should be clearly separated from its background and neither too close nor too far away from you, something like 2-3m away from you and at least 10m away from the background. Set your lens to a longer length (zoom in) and take pictures of it at all the apertures you can find, taking notice of how the shutter speed is compensating for these changes. Make sure you are always focusing on the subject and never on the background.

As a bonus, try the same thing with a distant subject and a subject as close as your lens will focus, And, if you want to keep going, zoomed in maximum, and zoomed out.

Back on your computer, see how depth of field changes with aperture. Also compare sharpness of an image at f/8 and one at f/22 (or whatever your smallest aperture was): zoomed in at 100%, the latter should be noticeably less sharp in the focused area.

As always, share what you've learned with us all :-)

have fun!


r/photoclass2021 • • Jan 13 '21

Assignement 04 - My camera

80 Upvotes

Please read the main class first

For today's assignment, I would like you to try and classify your own camera. Is it a compact, a mirrorless, DSLR or an exotic.

The second task is to try and find out why your current system is right or wrong for you.

The third task is to try and find out what it would take for you to want to change systems.

Write your findings in the comments and ask any questions you need :-)

Final task is to change your flair if you haven't yet

have fun!


r/photoclass2021 • • Feb 20 '21

11 - White Balance

37 Upvotes

Have you ever taken a photo where the colours appear all wrong? For instance with a strong blue or orange tint (what is called a colour cast)? If you ever took a picture at night, it most probably happened to you a fair few times. This is a case of wrong white balance: the colours are not well balanced with each other, and casts appear. One particularly visible consequence is that white is not pure white anymore, but slightly yellow or blue instead.

13-01.jpg

This is because not all light is created equal, and some have warmer components than others (i.e. they have stronger yellow and reds than blue and greens). We speak of light temperature, of which there is an actual scientific definition, though it’s not worth getting into this now. For instance, tungsten light (the usual incandescent lamps) appears much warmer than daylight sun, which is why it appears so yellow on night photographs. Fluorescent lights, on the other hand, are quite cold, explaining the “sterile” and inhuman look some offices have.

Unless it is extremely basic, your camera probably has a White Balance setting (often abbreviated in WB). Its usual modes are Auto (abbreviated AWB), Sunny, Shade, Fluorescent and Tungsten (with standard icons, see below). Choosing one other than Auto will tell the camera how to compensate for the current light conditions so that a white object really appears white.

Film photographers have it much harder, as the only two ways of controlling white balance are to use a different film (some are known to be warmer than others) or to use coloured filters.

Despite its somewhat technical nature, white balance is a very important creative tool, as we tend to have instinctual reactions to the set of colours used in an image: warm tones convey an idea of comfort, softness, happiness, while cold colours are usually distant, hostile and cruel. If it fits your vision, you should not hesitate to introduce (subtle) colour casts to enhance the message you are trying to convey.

Gangster wedding

Choosing the right white balance may seem like a difficult task. After all, our brain is so good at compensating colour casts that we rarely notice if our current environment is more of a tungsten or a fluorescent light. There are however very good news for digital photographers: if you shoot raw instead of jpg (which we will discuss in more detail in a later lesson), you will be able to set white balance after the shoot, in post-processing, with no loss of image quality. In other words, you do not need to worry about white balance at all until you get back to your computer, at which point, as we will see in a moment, it is a much easier task.

If you want to get white balance right in camera (because you are shooting jpg, or because you want to spend as little time on the computer as possible), you have three possibilities:

  • You can trust the camera with the job and shoot in AWB. Most modern cameras will do a pretty good job as long as the conditions are reasonable, but all bets are off when you add mixed, complicated lighting. In short, you can probably forget about WB as long as you are shooting natural light by day, but you should be paying attention once you add any kind of artificial light.

  • You can try to guess what the light composition is and set the camera WB in the relevant mode. It helps to also know that “fluorescent” means the image will get warmer, while “tungsten” means it will get cooler – using the screen, you can use trial and error until you get a WB that corresponds to your vision. This is quite cumbersome and you will occasionally forget to reset your WB mode between shoots, but with enough practice, it can work well.

  • Finally, you can use a grey card to create your own WB mode. This is definitely the most accurate method, but it is also the most complex and time consuming. What you are doing is take a photo of a neutral gray piece of paper (anything will do, really, but many stores will be happy to sell you overpriced pieces of cardboard), then tell the camera that this should be its new reference point for WB from now on. Obviously, you will need to repeat this process every time the lighting changes.

Viking

If, on the other hand, you shoot raw, you can adjust WB in post. There are several ways to do this, one of which being to use the same modes than your camera or to use sliders to set light temperature to the exact values you want. However, the easiest method of all is simply to pick out a neutral part of the image and tell the software “this should be neutral, please adjust white balance accordingly”. As long as you can find an object that should be some shade of grey, you obtain results just as accurate as if you had used the custom WB procedure. Of course, it will occasionally happen that you can’t find anything neutral, and you might have to resort to the sliders and your own memory of the scene. To prevent this kind of scenarios, some photographers do take a picture of a grey card at the beginning of an important shoot, in order to have a point of reference.

View the Assignment here

13-01.jpg


r/photoclass2021 • • Mar 25 '21

Break

37 Upvotes

Hi photoclass,

it's been busy times so in order to allow some catching up I'm going to insert a small break in photoclass. I propose a 2 week break where I'll just post some weekend assignments and some fun things to do if you're bored but no "real" classes or assignments.

this should allow at least some of you to catch up :-)


r/photoclass2021 • • Jan 24 '21

Assignment 06 - Pipes and buckets

50 Upvotes

Please read the class first!

The goal today is to get a bit more familiar with exposure and how it is affected by the main three parameters of shutter speed, ISO and aperture. I am afraid the assignment will require control of these elements. If your camera has no ASM modes or manual controls via menus, you won’t be able to complete the assignment, sorry.

Keeping a single scene for the whole session, the assignment is basically to play with your camera in semi and full manual modes. Make sure to turn “ISO Auto” to off. What we will call “correct exposure” in the assignment is simply what your camera think is correct.

  1. Obtain a correct exposure in full auto, aperture priority, speed priority and full manual mode. (4 photos)

  2. Now do the same but with a big underexposure (2 stops, or 2 eV). (4 photos)

  3. Same with a big overexposure (2 stops/2 eV again). (4photos)

  4. Get a correct exposure with an aperture of f/8 in aperture priority (easy), full manual (easy-ish) and speed priority (a bit harder). (3 photos)

  5. Do the same with a speed of 1/50. (3 photos)

  6. Now get a correct exposure with both f/8 and ISO 400 (you can use any mode). (1photo)

  7. Finally, try to get a correct exposure with ISO 200 and a speed of 1/4000. (1 photo)

Also remember that there are many pieces of software, some free, which allow you to review which parameters were used for the capture. It is always stored in the metadata of the image.

The function to tell your camera to make a darker or brighter photo is called "exposure compensation"


r/photoclass2021 • • Jan 24 '21

06 - pipes and buckets

58 Upvotes

Welcome to the second part of this photography class. After getting an overview of what a camera is and how focal length works, let’s now go on to what is probably the most important and scariest parameter of any photograph: exposure.

Introduction

In order to keep things (relatively) short, we will split this vast subject into many small digestible pieces. In this lesson, we will see what exactly exposure is, and how we can use three camera controls to modify it. In the next lesson, we will talk about a very important tool for reviewing exposure: the histogram. In the subsequent three lessons, we will talk about each of the three controls (shutter speed, aperture and ISO) in more detail. Finally, we will discuss the slightly arcane topic of metering modes.

Climber on Flying Buttress Direct.

A photograph, as the name suggests, is a record of light. Exposure, quite simply, is the amount of light to which the sensor is exposed. We are all familiar with photos taken indoor without a flash and which appear too dark: they are underexposed, not enough light was allowed on the sensor. Conversely (though perhaps more rarely), we have also seen images too bright, with pure white in large areas: they are overexposed.

There is not one correct exposure of a given scene – depending on what you are trying to say with your image, you might actually over or underexpose on purpose. For instance, a backlit scene could be underexposed to create silhouettes against the sky. Or a portrait might be carefully overexposed to create a high-key feeling. However, what we will generally consider a good exposure is one with an even (but not necessarily linear, as we will see tomorrow) distribution of tones, from pure black to pure white, with no details lost to either shadows or highlights.

With the exception of some very manual film cameras, all modern camera bodies include one or several light meters, whose role is to measure the quantity of light and give a guess of what the correct exposure should be. What you will do with this information will depend on the shooting mode you are using: in auto, the camera will simply set all the required parameters so that you can shoot without questions asked. Alternatively, it can let you set one or more parameters and fill in the remaining ones (aperture or speed priority modes), or it can let you do the whole thing yourself, mentioning how your settings compare to what it thinks you should do, but not acting on it (manual mode).

3 parameters

Three, and only three, parameters control the quantity of light to reach the sensor. They are the usual suspects: aperture, shutter speed and ISO. Let’s see briefly how they work with an analogy.

Imagine that your sensor is a bucket. Light is water coming from a pipe (your lens) into the bucket. What you want to achieve is a good exposure – just the right quantity of water, to the rim but without spilling any on the floor. You can achieve that by doing three things:

  • You can change the diameter of the pipe. The wider it is, the more water will come into the bucket (ignoring pressure issues – that’s when the analogy starts to break down).

  • You can modify the amount during which the pipe is open. Obviously, the longer you leave it open, the more water will come through.

  • Finally, the waterpressure. There is a switch to control the waterpressure. Set it to a high pressure and the bucket fills in no time at all but it sprays everywhere, set it low and it'll take a long time to fill, but no spill at all.

You can decide to modify any of these parameters as you wish to achieve your perfect bucket, with some limitations of course: for instance, you can’t have a pipe of infinite diameter, there is a maximum size. Likewise, your pressure can't be to high or you might spill more water than you'll get in the bucket.

Something that is extremely important to realize is that all three parameters are bound together. If you modify one and want to keep the same exposure, you need to modify another in the opposite direction. For instance, if you want to use a pipe with twice as much area (doubling the flow), you need to either cut the flow duration by half or use a pressure half big. Modifying a single parameter will result in a modification of the bucket content and that should not happen.

As you probably guessed already, the diameter of the pipe corresponds to the aperture, the duration to the shutter speed and the pressure to the ISO. Things get even more interesting because each of these parameters has another consequence beside modifying exposure: aperture changes depth of field, shutter speed can introduce motion blur and ISO modifies the noise levels.

Model and bluebells

In practice

Let’s be a little more concrete. When you put your camera in a non-automatic mode (if it has one, if not, you can look at the metadata of old photos to find this information), you should see three numbers in the display, for instance f/8, 1/50, ISO 400 (the ISO is often hidden, you may have to hunt it down in the menus). What this is telling you is that the aperture is f/8, the speed 1/50th of a second and the ISO is 400. What you want these numbers to be will be covered in the next lessons. For now, let’s take a look at how modifying them changes exposure.

Put your camera in A mode. What this does is let you control the aperture and set the shutter speed accordingly. Turn the control wheel in one direction to modify the aperture. You should now see instead f/5.6 (if you turned in the correct direction). What this is telling you is that you are now using a wider pipe diametre and have doubled the flow. What you should notice is that the speed changed as well: now it is showing 1/100, and the ISO hasn’t changed. To compensate for the modification of one parameter, the camera changed another one, and kept the same overall exposure.

If you do want to modify the overall exposure while in a mode other than manual, you should use the aptly named button called “exposure compensation”. What this will do will depend on the mode you are using, for instance if you are in Aperture Priority, it will change the shutter speed to fill the bucket to a different level, while leaving you in control of the aperture.

Red

In manual mode, the camera lets you modify all three parameters yourself without attempting to compensate and keep the same global exposure. It will usually let you know how far away you are from what it considers the correct exposure, but whether you want to follow its recommendation is up to you. In this mode, since we have full control anyway, the exposure compensation button is useless.

Where are we now?

This should hopefully give you a good idea of what is going on in a camera brain, and what the A, S and M modes are for, but we have left a lot of things out, to be covered in the next lessons. For now, make sure you have really understood all the concepts here, as they are absolutely crucial for the rest of this course (and of your photographic career). Food close-up.

the assignment is here.


r/photoclass2021 • • Jan 05 '21

The photoclass Lounge

76 Upvotes

Hi photoclass

you can use this post to discuss, share experiences or ask questions unrelated to specific classes or assignments.

I won't be monitoring this one so if you need me or a moderator, mention our usernames.


r/photoclass2021 • • Jan 15 '21

Weekend assignment 2 : a can

78 Upvotes

Hi photoclass,

This week, we are going to work on composition. What I want you to do is make 5 different photo's of a sodacan.

  • 1 where the camera is higher than the can

  • 1 where the camera is the same hight as the can

  • 1 where the camera is lower than the can

  • 1 with the can in the middle of the photo

  • 1 with the can at about 1/3 of the photo

at least 1 with natural light (sun or clouds), at least 1 with artificial light (candles, lightbulbs, flashlights, whatever you want that isn't the sun) (can be mixed with the previous 3)

you can mix those.... so a photo with the can in the middle, shot from the same hight and using natural light covers those 3 requirements all in one photo

tips:

  • mind your background : make sure it fits the photo, when in doubt, search for a white wall or use a sheet of paper to make your own... put the can on the bottom and bend the paper against the wall to make a seamless background

  • use a tripod or pose the camera on a stable surface to get sharp long exposures

  • look at the photo's and try to improve them while shooting, don't be satisfied with the first attempts

Inspiration? : there is over a 100 years of product photography to take it from but don't copy, make it your own. Here are some examples from 2018 class: