r/pdxgunnuts • • 6h ago

DRRC Steel Target Ban Update

21 Upvotes

I have more insight of what happened at the meeting what this likely means going forward but first the new email:

Email

Changes to shooting steel

The changes are being made because of ricocheted rounds leaving the property. This was witnessed by a Club Officer while visiting a property of a club neighbor.

The board has put a committee together to explore and establish the use of steel targets moving forward on DRRC ranges.

  • Until further notice, no steel targets of any kind are allowed on the silhouette range.

  • Until further notice, the only steel targets allowed on the LEM (formerly TSB) range are 15-degree targets and reactive targets that move back and forth only. Current SOP for minimum allowable distance for steel targets remains the same (minimum of 10 yards for pistols).

  • Until further notice, the only steel targets allowed on the DR (Dynamic Range) are 15-degree targets, reactive targets that move back and forth only, and Texas star style reactive targets. Current SOP for minimum distance for steel targets remains the same (minimum of 10 yards for pistol and a minimum of 50 yards for rifle).

  • All disciplines that utilize steel targets must have a minimum of two RSOs at each event. The RSOs must be dedicated RSOs for the event (cannot be event participants).

  • Disciplines that utilize steel targets must submit their course of fire and list of RSOs to the DRRC CRSO a minimum of three days prior to the event in question for approval. Course of fire and RSOs must be approved by DRRC CRSO.

If you have any questions, please reach out to any board member or the CRSO.

Recount

As for what happened at the meeting, we had a handful of the regular practical pistol/multigun shooters turn up. This was super important and acknowledge by one of the board members. We could still use more. The match directors looked visibly stressed. It was still roughly 90% geriatric fudds as per usual. Session started, President John emphasized discussion on the steel target issue was going to be purposefully limited for the sake of conducting the meeting efficiently. They started taking the limited question period rate-limited to 2 min for 3 people.

Multigun Match Director immediately kicked it off flustered asking if we can even get a explanation of what happened which is pretty alarming that they haven't even disclosed details of this "emergency" to other DRRC staff. President John provided an intentionally detail-limited retelling that he "observed" ricochet while discussing a complaint from the residence in question. That's it.

He wouldn't budge on any additional details and still hasn't. I am calling attention to this being egregious because the next course of action would be to hear from the general membership and collect possible solutions on what to do. However, that's not possible if we can't even get simple details like what caliber projectile was found and where did it impact on the property. Instead a private committee has been formed to investigate, who's on it? Who knows? It will continue to keep details out of membership purview for the time being.

As far as we're concerned President John could have heard a field mouse or other animal snap a twig in the grass and assumed it was ricochet. That being if his account is true I can sympathize with needing to take immediate action to save face for himself and the club. Most are in agreement that since we know it happened next to the silhouette range the ban should have ONLY affected the silhouette range instead of being club-wide.

After Multigun Match Director did what he could to extract details and acknowledge that his time allowance was essentially set up for failure. The second Practical Pistol director followed up to call out that due process wasn't handled with this ban and the whole incident is being handled atypically. Now, I have actually decided to follow up and read the bylaws to see if it's permitted for the president to enact a full executive action unilaterally without the board's say. As far as I can tell the bylaws do support this unfortunately. So I won't denigrate the DRRC President with full blown executive overreach like another well known administration.

The third speaker was one of the fudd general membership. He didn't really say anything meaningful besides brown nose the President that he thinks he acted responsibly and that this was the right decision. From experience, I would group them in with the same elderly shooters that act surprised when they catch spalling from people shooting steel on dynamic or that moving and shooting should be prohibited in general. You know, the usual people who claim to be pro-2A and then vote for grabber things if it's got LEO support tacked on.

I want to call out the three-day course of fire approval submission requirement and new RSO requirements they've instated. In my opinion the former seems like targeted harassment of the multigun director since he's known to have dyslexia/communication challenges. I largely disapprove with how this entire event has been handled and am concerned about the club's future going forward if we continue to allow the President to bring this Professor Umbridge-esque "you will do as I tell you or you'll be disciplined" style of leadership. That being said I think an investigation and temporary steel suspension on Silhouette is warranted. I can also certify the club does not have the resources on tap to meet the RSO requirement. Existing staff gatekeeping RSO scheduling and approval was previous issue handled by previous committees in the past and has not been rectified.

Side Note

I was pleasantly surprised to see how many of you engaged on the last post. Not only that the LEO scheduling issue was brought up frequently. That amount of complaint has significant potential to shape club direction and I would encourage further discussion on it to bring this matter up to the board. President John is a LEO vendor and to my knowledge as never publicly disclosed that it's a conflict of interest for his position. The historic Executive Officer keeps pointing that there's always a non-dynamic range spot available but this doesn't fix the issue that Dynamic Range has flexibility none of the others can match and it should have availability prioritized on that fact alone.

TL;DR: Steel is now banned on Silhouette-only with some additional restricted/red-taped club-wide requirements (particularly for already burdened match directors) after President John claimed he witnessed a ricochet off-property, yet he shut down meeting discussion, formed a secretive committee, and refuses to give anyone—including match directors—actual details of what happened.

Original Post: https://old.reddit.com/r/pdxgunnuts/comments/1xzvpv6/drrc_board_meeting_on_banning_steel_targets/


r/pdxgunnuts • • 21m ago

Looking to meet new friends who want to shoot in the area.

3 Upvotes

Hey all! I'm in the Portland area and my collection has been growing a LOT faster than my actual trigger time. I'd like to fix that by finding some like-minded folks to go shooting with on a semi-regular basis. Douglas Ridge Rifle Club (despite its fudds) would be my first pick, but I'm open to wherever people like to go - other clubs, public ranges, whatever works. I am experienced also with the PSTC but prefer outdoors if possible.

**What I'm into:** pretty much everything from WW1 onward. The collection so far is a mix of US WW2 rifles, some ComBloc milsurp, an AR, a pistol caliber carbine, and a handful of pistols and revolvers, with an RPK-pattern rifle on the way!

**Where I'm at:** still quite new, and I don't get out to shoot nearly as much as I should. I take safety very seriously, but I'm not going to pretend I know more than I do. Probably stormtrooper tier accuracy (not that bad but close). The very first thing I'd want help with is properly zeroing everything, since right now basically nothing I own is dialed in the way it should be. If you enjoy walking a newer shooter through that, I'd be grateful. Happy to bring ammo, cover range fees or lunch, and you're welcome to shoot anything I bring. Would love to work on getting much more accurate in preparation for competitions.

* Not looking to hang out with hardcore MAGA/Trumpists.

* I work in tech, so the luddite/anti-AI crowd probably isn't a great fit either. It would just create conflict.

* That said, I am MORE than okay with lively political debate and arguments and whatever other interests you have, and I'm fine with people who even otherwise lean conservative (heretical I know!). You don't have to agree with me on everything or even that much outside of the below.

* The one hard expectation: pro 1A, pro 2A, pro 4A, and happy about the outcome of United States v. Hemani All four of these, no exceptions.

If that sounds like you, please send me a DM! Experienced folks, fellow newbies, milsurp nerds, all welcome.


r/pdxgunnuts • • 23h ago

Local Gunsmiths to the Willamette Valley

5 Upvotes

Hi everyone. I’m looking for a gunsmith anywhere in the Willamette Valley that can thread (and potentially cut) a rifle barrel. Thanks.


r/pdxgunnuts • • 21h ago

Cleanup?

3 Upvotes

Maybe a stupid question but how do you guys pick up your brass? I've only ever fired at indoor ranges with big brooms to push everything past the firing line. On the regular ground, what's a good way to bag it easily? Do you bring your own dustpan?


r/pdxgunnuts • • 1d ago

Glock 19 slide with an RMR cut and tan Cerakote

1 Upvotes

Kept this Glock 19 slide clean with an RMR cut and a single color Cerakote finish. We handled the work at our Vancouver, WA shop, and this one was in and out in just a few days.

Would you keep the frame black or match it to the slide?


r/pdxgunnuts • • 3d ago

DRRC Board Meeting on Banning Steel Targets Tomorrow

45 Upvotes

If you're a member please show up to the board meeting at 7PM (arrive earlier for limited parking). Things have not been going well for Douglas Ridge Rifle Club (DRRC) supporting of modern practical shooting since the last board election over the Summer. New LEO Vendor leadership has effectively focused on transforming the club into a Police Training Facility and removing more and more membership access and rights.

UPDATE: I've received word that the incident involves neighbor's property damage due to ricochet. Obviously this changes things. If you do still choose to come please arrive with an attitude willing to listen and offer solutions rather than complaints.


r/pdxgunnuts • • 3d ago

Ooooo....shiiiny

Post image
13 Upvotes

Always did dry tumble...first wet tumble done...ready for drying


r/pdxgunnuts • • 8d ago

Place to chop a WASR paratrooper

4 Upvotes

As the title implies, I'm looking for a reputable gunsmith to chop my WASR (and preferably also laser engrave it).

Any recommendations appreciated!


r/pdxgunnuts • • 10d ago

A gold Baby Eagle from our Vancouver, WA shop

Post image
38 Upvotes

We finished this IWI Magnum Research Baby Eagle in .40 S&W with gold Cerakote here in Vancouver. Seeing it come together took us right back to GoldenEye and the scramble for the Golden Gun.


r/pdxgunnuts • • 10d ago

Stipple

7 Upvotes

Can anyone recommend a good local to PDX stippler? Want to get a 43x done…
Thanks!


r/pdxgunnuts • • 16d ago

Gun gear swap/trade/sell?

0 Upvotes

My garage is packed with firearms accessories, too many to list individually on websites. Is there any interest in a trade show that brings gun people together to be able to trade/swap/buy/sell firearms related accessories? A community garage sale of non-FFL related gear so to speak.

48 votes, 9d ago
34 Yes
14 No

r/pdxgunnuts • • 19d ago

Wolf Creek

76 Upvotes

The new improved lanes are great at Wolf Creek! Please, please, please clean up after yourself! We cleaned up a bunch of garbage, brass, and bullshit off of lane one this morning. Also, whoever is the dumbass that was shooting a car battery at about 80 yards...get fucked. That's completely fucked up. Clean your shit up!


r/pdxgunnuts • • 19d ago

Clay Pigeon Shooting at/near N. Fork Wolf Creek

6 Upvotes

New to the sub, not new to firearms; my question is about whether using a clay pigeon thrower here (or at an empty quarry nearby) would be bad form?

I'm used to BLM spots in Central and Eastern Oregon where it's easier to find uncrowded (empty), safe, zones to launch and shoot clays. Don't wanna show up to a spot I haven't been to and piss people off unnecessarily, but looking for a place to do this along hwy 26 on the way to the coast. Obviously know the general rules about packing out waste, gun safety, etc. TIA.

EDIT: super appreciate the helpful responses, thanks everyone!


r/pdxgunnuts • • 23d ago

The sub is flip-flopping into restricted mode.

60 Upvotes

For some reason over the last several days the sub has flipped itself into restricted mode, forcing people to request access to post.

I've toggled the setting back to public and a saved a few times.

I am beginning to think it may have something to do with the fact I use Reddit correctly (old mode) and several new changes sometimes have strange effects on old mode use. I'll get to the bottom of this and fix it permanently, but it may goof a few more times.

Thanks in advance for your patience.

Edit (2026-11-02):
The failure in toggling the sub back to public from restricted mode is indeed due to using old Reddit. Under new Reddit the toggle is followed by a prompt to request the sub be set to public.

This is bizarre, especially as I never switched the sub to restricted mode.

I will update as soon as I have a response.

Edit II (2026-11-02): Reddit has approved the request to put us back into public mode. No word on the cause of the switch, but after using new Reddit for longer than I ever have, I am stunned by how awful it still is and cannot believe people prefer this mode. I'm switching back to old Reddit ASAP.


r/pdxgunnuts • • Oct 16 '26

Gun cleaning & maintenance class?

13 Upvotes

Hi :) First time posting here. I bought my first gun back in 2020 and took a few beginner classes and did some range training but then dropped it. I haven’t picked it up in a few years and I want to start practicing again. I know my gun needs a good cleaning and I’d love to learn how to properly and safely clean it. Are there classes for this somewhere? I’ve looked up plenty of YouTube videos but I’d rather have someone teach me on the spot while doing it.


r/pdxgunnuts • • Oct 15 '26

Oregon Democrats' gun control record and what to expect in 2027

44 Upvotes

With November approaching, it's worth looking at Oregon Democrats' recent gun legislation and what could happen next session.

Measure 114 requires permits to purchase firearms and bans magazines over 10 rounds. It also allows police chiefs and sheriffs to deny permits even when applicants pass background checks, based on a subjective determination of whether they pose a danger. This creates opportunities for discrimination, personal bias, and unequal enforcement, particularly against marginalized communities.

Meanwhile, HB 3075 (2025) and the original HB 4145 (2026) proposed exemptions allowing law enforcement to avoid permit requirements and magazine restrictions, including in their personal lives. Essentially, police could be exempt from laws imposed on everyone else.

Those provisions were removed before HB 4145 passed, but Democratic Sen. Lisa Reynolds, who carried the bill, explained in an email that the Senate scaled it back to avoid a Republican walkout. She wrote:

"WE still MUST make the changes in the House version of HB 4145, and we will do so in 2027."

Michael Bloomberg's Everytown for Gun Safety spent $200,000 supporting Measure 114 and continues advocating for firearm restrictions in Oregon.

Democrats currently control the governorship and both legislative chambers. If they retain their trifecta, Reynolds has made clear she intends to bring these changes back in 2027.

Regardless of where you stand on gun control, why should police have discretion to deny firearm purchases while potentially receiving exemptions from the same restrictions they're enforcing?

Sources:


r/pdxgunnuts • • Oct 13 '26

ORS 166.272 and "registered as required under federal law"

26 Upvotes

I blew all my extra tokens at the end of the week and transcribed over 40 hours of discussions about this law in the various committees in 1989 and 1997 when the specific wording was discussed. No idea if this is useful to anyone, since it was really just a curiosity of mine. In case it is, I posted everything on a Substack page.


r/pdxgunnuts • • Oct 13 '26

Bulk FFL Transfer

1 Upvotes

I am moving to Portland in the spring and I have about two dozen firearms I need to ship to myself. Due to timings I won't be able to move into my new place for month or so after I get to Portland. I am looking for an FFL within 2 hours of Portland that will receive the shipment from my local ffl and hold it for me until I am moved in. It would suck to pay a transfer fee on each one, so I am looking for an FFL that will do a negotiated bulk transfer fee. Please let me know if you've done a move like this before or have a recommendation of an FFL who could handle this at a reasonable price.


r/pdxgunnuts • • Oct 12 '26

Store recs?

2 Upvotes

Does anyone happen to know where I can find a store that sells threaded barrels for g19/45?


r/pdxgunnuts • • Oct 10 '26

Years Long Delay on Background

0 Upvotes

I was able to purchase firearms years ago - now its been years since my latest background check is still delayed - they say its because CA purged my old case from how old it is - i have since gotten my record expunged and Oregon still states its an incomplete background check and cannot process it - i had a lawyer from CA check to make sure nothing is holding up they stated from what it looks like Oregons system is not reading the records properly.

Who do yall know I can contact to look at this more in depth. I have my CCL for years in Oregon and Utah so i can carry but seems i cant buy.

Also can gun shops red flag you feel like when i order my stuff and get asked what are you planning on doing with all these was a red flag for me as to why they give a crap.


r/pdxgunnuts • • Oct 09 '26

ATF Guidance just released for the 5th Circuit injunction - How does this affect us fellow Oregonian's?

Thumbnail reddit.com
24 Upvotes

r/pdxgunnuts • • Oct 07 '26

Ten Years of Wolf Creek Shooting Lanes

Thumbnail
trashnoland.org
60 Upvotes

This is the story of Wolf Creek Target Shooting Lanes. Our hope is that you will help maintain and care for it. Thank you.


r/pdxgunnuts • • Oct 08 '26

Can I try your piston rifle/pistol?

5 Upvotes

Hey all, I'm looking to buy my first piston rifle, but it's very hard to pick without getting hands on with them. Currently looking at the following roughly in this order:

Robinson Armament XCR-L
CZ Bren 2
PWS MK111 (and others?)
LWRC
LMT
PSA JAKL
Galil ACE

Do you have a piston rifle not on the list? Let me know, I'd love to check it out! I'm in Portland and can travel.
My schedule is pretty flexible at the moment and I would love to see what you have and throw a few rounds down range. Thanks!

Mods, if this isn't allowed, I apologize. Feel free to remove :)


r/pdxgunnuts • • Oct 07 '26

Moving back to OR

Thumbnail reddit.com
5 Upvotes

r/pdxgunnuts • • Oct 08 '26

Arsenal circle 10 mag help

Thumbnail
gallery
1 Upvotes

Does anybody know how to remove this dumb ass ten round limiter out of this arsenal circle 10 mag or know any gunsmiths that can remove this? Thanks