r/oratory1990 • u/Lopsided_Band_4979 • 1h ago
Quve – A non-root system-wide 64-bit PEQ for Android 13+ (Shizuku, no MediaProjection / no DynamicsProcessing) with separate Common & L/R presets and a system-wide blind A/B Shootout



I’ve been building Quve, a free and open-source (GPL-3.0) system-wide Parametric Equalizer for non-rooted Android 13+ devices powered by Shizuku.
1. No MediaProjection prompt or capture-block issues (unlike RootlessJamesDSP)
RootlessJamesDSP relies on AudioPlaybackCapture / MediaProjection, which triggers a screen-capture permission dialog and cannot process apps that block internal audio capture (like unpatched Spotify).
Instead, Quve runs a com.android.shell (UID 2000) UserService via Shizuku and registers an Android AudioPolicy (ROUTE_FLAG_LOOP_BACK) to capture USAGE_MEDIA, USAGE_GAME, and USAGE_UNKNOWN system-wide—with no MediaProjection dialog and no dual playback.
2. No DynamicsProcessing API (unlike Equalizer 314 / Wavelet / Poweramp EQ)
Equalizer 314, Wavelet, and Poweramp EQ rely on Android’s DynamicsProcessing API, which attaches to audio sessions (or session 0), can conflict with other session-0 EQ apps, and leaves filter behavior up to the OS/OEM HAL—resulting in lower EQ precision compared to direct software DSP engines like RootlessJamesDSP.
Quve doesn't use DynamicsProcessing at all. It intercepts raw stereo PCM and processes everything directly in its own 64-bit software DSP loop, giving you full filter precision without DynamicsProcessing's limitations.
3. High-Precision 64-bit DSP Pipeline & Coupler Accuracy Verification
64-bit floating-point (double precision) Transposed Direct Form II (TDF-II) stereo biquad filters at 48 kHz with soft-clipping protection.
8 parametric filter types:
PK(Peaking),LSC(Low Shelf),HSC(High Shelf),LP(Low Pass),HP(High Pass),NO(Notch),BP(Band Pass), andAP(All Pass).Direct numeric entry for
Fc,Gain,Q, and ±0.1 dB preamp steps, a real-time frequency response graph (Common L+R,Total L,Total R), and Auto 0dB headroom normalization.Full Equalizer APO (
.txt) import/export, includingPreampand multi-channelChannel: L/Channel: Rlines—you can import.txtfiles or paste raw Equalizer APO text directly.
Coupler Accuracy Test (see attached plot):
To verify end-to-end accuracy on real Android hardware, I measured the stock (un-EQ’d) response on an acoustic coupler, then measured it again with a multi-band test EQ active in Quve, and compared the measured result against the theoretical response (Without EQ + test2 EQ (predicted) vs. With test2 EQ (measured)), normalized to 0 dB at 1 kHz with no smoothing at 0.366 Hz resolution:
The predicted and measured curves overlap tightly from 20 Hz to 20 kHz, including sharp notches and narrow peaks.
Across the midrange, the
measured − predictederror sits virtually flat at ~0.00 dB, and stays around ±0.1 dB across nearly the entire band (with minor acoustic/measurement variance below ~150 Hz and above ~15 kHz).
4. Independent L/R EQ & Separate Common / L-R Preset Storage
If you correct driver sensitivity mismatch or channel imbalance, mixing that correction into every tonal preset gets messy fast.
Quve separates Common (L+R) from Left (HW Calib.) and Right (HW Calib.) chains (each with its own preamp and bands).
Common presets and L/R presets are saved separately: Switching your Common preset (e.g., testing different target curves or tonal tweaks) keeps your active L/R hardware calibration intact.
You can also save combined bundles when needed—and if a bundle specifies a different L/R preset than your current one, Quve asks whether to apply Common only or switch both.
Includes a per-preset L⇄R Channel Swap that can be placed before or after the independent L/R stage so driver calibration stays locked to the physical earpieces.
5. System-Wide Blind A/B EQ Shootout (Glicko-2)
When comparing target curves or tonal tweaks, sighted bias is hard to avoid. Quve has a built-in EQ Shootout that runs system-wide while music keeps playing in any app:
Pick 2 to 8 Common EQ presets to compare blind (all using your single chosen L/R calibration preset and optional Shootout-only channel swap).
Randomized A/B assignments every round, click-free crossfading, and continuous K-weighted loudness matching measured directly from the playing music.
Vote in-app, via a floating Material 3 overlay panel over your music player, or from the notification.
Finishes with a Glicko-2 ranking, rating history chart, and head-to-head league table.
Other Features & Requirements
Output Device Auto-Switch: Automatically applies presets or bypasses EQ per device (USB DAC, Bluetooth, Wired/Line Out, Built-in Speaker).
Per-App Bypass & Low-Latency Mode: Exclude specific apps via
excludeMixRule, or enable 4 ms low-latency mode globally or per app.UI: Material 3 Expressive + Liquid Glass UI, 14 palettes, AMOLED Pure Black mode, English & Japanese localization.
Requirements: Android 13+ (
minSdk 33) + Shizuku (via Wireless Debugging, ADB, or Root).(Caveat: Capture relies on Android's
AudioPolicyrouting, so paths that bypass standard software mixing—such as bit-perfect USB direct drivers in certain players—won't be intercepted.)
GitHub / Releases: https://github.com/nanbeimerco/Quve
License: GPL-3.0
Tested so far on vivo X Fold3 Pro (Android 16), Xiaomi Pad 6 (Android 14), and Samsung Galaxy S21. Feedback, bug reports, and device compatibility reports are very welcome!
Since I’m not a native English speaker, I relied quite a bit on translation tools to write this post—please excuse any unnatural phrasing!
