r/opencodeCLI • u/HelioAO • Jun 11 '26
OpenCode Go is a total lie (IMO)
First of all, I want to say that I tested the service for two months. It is definitely cheap and a very accessible option for anyone wanting to try out various models, but I was always confused by something. Most open-weight LLMs claim to be close to GPT 5.5 or Opus 4.6 and 4.7, etc., yet in reality, those benchmarks didn't reflect the actual code quality.
Recently, I decided to test a direct plan from MiniMax, and it finally clicked. I realized it wasn't just a lie, even though some people complained that OpenCode Go used quantized models. I found that hard to believe at first since it is a paid service (even if it is cheap), and quantizing recent models is difficult. I originally assumed the low price was simply due to corporate partnerships.
However, when you test directly with the companies that actually create them—using their own native plans—you see that GLM, MiniMax, and Moonshot are truly very close to GPT and Opus. There is still a slight gap in quality, but it is so minimal that you could easily rely on just one of them, depending on your plan.
A few observations on the specific services:
While the MiniMax plan is quite advantageous, the $20 plan won't cut it if your workload is intense.
I have to agree with DHH, who mentioned that he only works with Kimi from Moonshot. When I was testing via OpenCode, it made me think that his statement didn't make any sense at all.
Ultimately, when you test directly through the provider that created the model, the quality is significantly superior, regardless of the response speed.
Just to be clear for the internet trolls: I'm not simply bashing OpenCode Go. I actually believe it provides access to several models that would be quite expensive individually.
However, after testing OpenCode Go extensively with some friends for nearly three months, almost none of the models seemed incredibly good; they were just okay.
What I mean is: if you're happy with it, then be happy.
And one more thing: I don't have proof that OpenCode Go uses quantized models. I had already read several comments about this, but none of them really convinced me until I had the experience I just explained. That's when I realized the quality is inferior.
I don't know for sure if it's because the models are quantized, and I'm not making a definitive claim here. It could be that the temperature is lower or some other technique is being used. Models are truly complex.
4
u/ECrispy Jun 11 '26
not this nonsense again ffs
they dont host their own models, its a small company with a tiny number of users.
they dont quantie the models, you're being served from endpoints just like openrouter, opencode is just a routing layer
mentioning DHH doesn't make your post legit, quite the opposite, he's the hack with Omarchy and calling it a distro when its just some poorly put together scripts
who started this whole 'opencode go is inferior models' myth ??!! its a cheap service that gives you 4-6x the value of api calls. you want to use the api, go aheaad
0
u/HelioAO Jun 11 '26
I agree that Omarchy is just a bunch of scripts, but I never said he is a god. Furthermore, saying it uses OpenRouter does not prove anything by itself. Actually, they use Deepinfra, which is declared to use FP4 quantization to reduce costs and increase speed. https://deepinfra.com/blog/glm-5-1-deepinfra-agentic-engineering-model
1
u/ECrispy Jun 11 '26
well I apologize for the remark about DHH, the blind worship by so many (which you didn't do) just bugs me.
I didnt mean to say openrouter, I meant they use a router like that. should've been clearer. Does opencode go use deepinfra for all their models?
even some providers on openrouter and others are quantized. It all comes down to cost, you will pay more for quality.
the trick now is using better tools and harnesses to keep using cheaper models.
1
u/ELPascalito Jun 12 '26
Mimo, Kimi and DeepSeek are already native INT4 tho, most modern models are natively at 4bit yet perform great, quantisation has nothing to do with this, y'all are just hallucinating and complaining about a 10 dollar monthly plan lol
3
u/gorgono95 Jun 13 '26
Here is the funny thing. Literally two days ago, I bought an OpenCode Go subscription to test the models and see how they perform.
I tested them on 10 small projects, and honestly, I was not impressed. I use Codex and Claude Code, so the difference was not just small ... it was huge.
In planning, they missed a lot. In execution, models like Kimi 2.6 could not even get the logic right when building something as simple as a Tic Tac Toe game.
And now I find this post, and suddenly it all makes sense. Like, it actually makes a lot of sense.
I have not subscribed to a real provider yet, so I cannot say for sure until I test the same models directly from an official provider. But based on my experience, this explanation would make sense to me.
Offering so many models for $5 is honestly insane, especially when MiniMax M3 alone starts at around $20. And that is just one model.
So yeah, as of right now, I am not impressed with OpenCode Go. None of the models I tested did an actually good job.
1
u/akumaburn Jun 13 '26
Which harness did you use? My experience has been that as long as the context is kept in check Kimi K2.6/GLM 5.1 are within "spitting distance" of Opus 4.7; Deepseek v4 Flash feels basically like Sonnet for much cheaper.
2
u/HelioAO Jun 13 '26 edited Jun 13 '26
I completely disagree that DeepSeek Flash looks like Sonnet.
1
u/akumaburn Jun 14 '26
For back-end/non-visual tasks on MAX thinking, it behaves like Sonnet; just much faster.
1
u/gorgono95 Jun 13 '26
I used OpenCode Go and tested all of these models through their editor.
K2.6 struggled to even get the Tic Tac Toe logic right. GLM 5.1 had impressive UI output, but failed once the projects became a bit more ... complex. I really liked how fast DeepSeek v4 Flash was, but it is definitely not on Sonnet level. It misses quite a lot, so you need to be extremely specific and detailed with what you want.
Another issue I noticed was that many models kept creating files in the wrong folders, even though I had a very detailed INSTRUCTIONS.md that they were supposed to follow every time.
I also tested them on one of my bigger projects, which has well-defined workflows, semantic search, documentation covering basically everything, detailed instructions, and skills. This is where they really started to fall apart. I do not know if they simply cannot handle that much context, or if they lose track of it mid-implementation, but the results were not usable.
I also tried several models for planning, including Qwen 3.7 Max and GLM 5.1, and I was not impressed there either. GPT-5.5 found many missing pieces that would eventually cause bugs, loops, or broken logic, while the others missed them.
So it feels very weird to hear people say K2.6 is on par with Opus 4.7.. because for me it was one of the worst-performing models across almost every task, besides the BigPickle model.
For UI, the best ones so far were GLM 5.1 and MiniMax M3, by far. For planning, Qwen 3.7 Max gave me the best result so far.
I still have around a month left to test them properly, soooo I will keep doing that because honestly, I am having a lot of fun with it. I am not trying to "shit" on these models either. I understand they are open-weight and much cheaper than what I am used to with Codex and CC ... so I am keeping my expectations realistic.
But for me personally, it currently feels like I simply could not use them for production work. They would cause more issues than they solve, and I really do not want another nerfed Opus 4.6 experience haha.
1
u/akumaburn Jun 14 '26 edited Jun 14 '26
"through their editor" ; what editor are you talking about? By default these models through OpenCode Go are accessible via OpenCode CLI ; is that what you used? Or did you use some plugin in your coding IDE? or something else?
1
u/gorgono95 Jun 14 '26
OpenCode Desktop (Beta)
1
u/akumaburn Jun 14 '26
Ah i don't have any experience with their desktop app; have you tried the CLI to see if it makes any difference?
1
u/gorgono95 Jun 14 '26
I have not tried that yet. I am currently testing all the models again on a more complex project, and honestly, it is not looking too good so far.
I am thinking about posting the results soon and making everything available so people can check it out themselves.
Of course, it is still just one project, so I am not pretending this is some perfect benchmark... but it is interesting to see how differently each model approaches the same task.
I keep seeing people praise Kimi, but I still cannot get it to create a working project on the first try. This time K2.7 again ran into an error and had to fix the project afterward.
2
u/akumaburn Jun 14 '26
This really sounds like a harness issue to me; maybe the desktop app is using different system prompts. Try the CLI a few times see if its any better.
1
2
2
u/sken130 Jun 11 '26
How about OpenCode Zen? Has anyone tried it to see whether OpenCode provided model is worse than the companies' direct plans?
-2
u/HelioAO Jun 11 '26
They claim they don't make any profit from Zen, but I don't trust that and see no reason to use it. They also say the Zen models are optimized, which honestly makes me even more suspicious.
2
74
u/Tofudjango Jun 11 '26
Did anyone, including the author, actually read this rant?
76
u/jesjimher Jun 11 '26
I read it twice. But not because it was interesting, the text is duplicated.
6
2
1
42
4
4
1
u/frompadgwithH8 Jun 15 '26
I think I read like the first third or the first quarter but when I noticed him flip-flopping, I decided to not read the rest
I think it’s pretty common knowledge that if you use a large language model alongside the same harness by the same company, you will get better performance since companies tend to optimize their large language models for their own harnesses
29
u/elefanteazu Jun 11 '26
actually, opencode go just use the original providers for almost all the models
19
Jun 11 '26 edited Jun 11 '26
[removed] — view removed comment
-9
u/ashebanow Jun 11 '26
Minimax 3 is available on minimax’s token plan and has been since it was announced
9
Jun 11 '26
[removed] — view removed comment
6
u/ZeSprawl Jun 11 '26
OpenCode didn't get access to the weights, they forward your request to the MiniMax official API and have a deal with MiniMax to provide it.
51
u/Ariquitaun Jun 11 '26
I think you're mixing a lot of stuff up like distillation, opencode, the go plan and what model manufacturers claim about the performance of their models, plus a healthy dollop of ai-slop Your post can be safely discarded
11
u/look Jun 12 '26
It’s some weird new strain of conspiracy theory infecting the borderline brain dead. This thread is littered with people that have no idea what they are talking about making pronouncements that are nonsensical gibberish.
I mean, mixing up distillation and quantization?! That’s likely confusing the color blue with the shape square…
0
u/Forward-Presence3548 Jun 13 '26
The fact they used heavily quantized models is objectively true
2
u/look Jun 13 '26
No, it’s not. And no, they don’t.
Show some actual proof of your “objective truth”.
Or please just shut the fuck up with your know-nothing nonsense bullshit.
11
u/ZeusCorleone Jun 11 '26
I used mostly deepseek4 pro and flash and.. so far.. they are great for me and very fast and great quota (they come direct from moonshotai I think since its same speed as API). So if you focus on using GLM I believe you get more benefit for using a original z-ai sub yes.. You probably will get access faster to new released models from z-ai also.
3
u/retardedGeek Jun 11 '26
Why would you use z.ai subscription, when glm 5.x costs 2x usage. 3x in peak hours
3
u/Dingosavedyourbaby Jun 12 '26
Deepseek does not come from moonshot, it comes from the great Chinese whale itself
2
37
u/Ace-_Ventura Jun 11 '26
Opencode doesn't host models though. They use providers.
3
u/Accomplished-Air439 Jun 11 '26
It just occurred to me that it's quite possible that providers host quantized versions of their own models for such "wholesale" deals like opencode go. It would make sense, right? It reduces operational cost, and still leaves room for why direct API usage is attractive.
-3
Jun 11 '26
[removed] — view removed comment
2
u/Accomplished-Air439 Jun 11 '26
It could very well be the case that OpenCode didn't ask for quantized versions. When they contract with DeepSeek, Xiaomi, Z.AI, etc, those model providers just route all OpenCode requests to a quantized version to cut costs.
-1
u/Nexism Jun 11 '26
Usually these routers can provide models so cheap because they stitch together a bunch of accounts, or trial accounts and direct inference via those APIs.
Keeps cost down, but inference quality also drops on cheaper models.
On china's taobao marketplace, claude model tokens (ex-fable) are selling for like 10% of list price.
1
u/jedruch Jun 12 '26
I'm not sure I understood the bundling you described. Can you expand on how this lowers inference quality?
0
u/Nexism Jun 12 '26 edited Jun 12 '26
The trial accounts have a reasoning layer over it to redirect inference. Trial accounts might think theyre using opus, but actually gets sent to haiku.
Some routers (cheap chinese ones), bundle thousands of accounts together to produce the price point they're selling for seemingly the quality they provide.
26
Jun 11 '26
[removed] — view removed comment
7
1
u/aarz03 Jun 12 '26
in your opinion, is the performance of the said models available on opencode go equal to their native provider plans?
28
u/poolboy9 Jun 11 '26
Another opencode go is quantized shitpost.
Did you use your MiniMax sub to create your slop post? You sure as hell didn’t read it or you would have noticed the double text. Maybe you should have used the one on opencode, even quantized it beats your intellect.
2
5
u/Medium-District8420 Jun 17 '26
I purchased the OpenCode Go yesterday, and at the end of first day, the monthly remain 75%.
I think the monthly will be end in 5 days working
1
4
u/faitingu Jun 11 '26
For my tasks DS4 Pro, Kimi 2.6 and Qwen 3.7 Max on Go were good enough for my workloads and cheaper than any alternative of comparable or superior quality, except maybe using Deepseek directly.
They don't need to be better than providers X times their price. They need to be competitive at a total expense of 10-15 USD a month, and they easily achieve that.
7
u/joshualander Jun 11 '26
The models on OpenCode Go aren’t distilled or quantized unless the creators are doing that. How do I know? Occasionally, on OpenCode Go, you’ll get API errors because OpenCode has run out of Xiaomi or Alibaba credits.
1
6
u/Potential-Leg-639 Jun 11 '26
Cant confirm that - i have used everything you can imagine: Kimi/Minimax/Z.AI/Ollama/OpenAI plans. Opencode Go for 10$ is good and probably the best choice out there out of all these at the moment. Kimi plan has really gone down with usage lately, Minimax plan is still OK (but was better), Z.AI plan is still OK (i mean 3$ is great), but the value you get with Opencode Go (especially the 10$ plan) is really good. And also the models are good, it‘s BS and AI slop, that the other „native“ plans are better. Did you even recognize how much you get alone with Deepseek v4 and Mimo v2.5 out of the plan?
6
u/Zeeplankton Jun 11 '26
I genuinely think there is some weird bot campaign against opencode. I see posts like these and there is also never any proof.
Dax has stated they just directly buy from these providers on X.
He could be lying, but their entire products legitimacy depends on models performing well. Why would they be trying to shave off some API bill? They don't even make any money anyways. They're all venture capital. Their entire existence is around burning investor capital so they can claw marketshare from OAI and Anthropic.
It's possible the providers are serving quants to opencode but also why. It would just needlessly tarnish their product.
3
u/ApprehensiveDelay238 Jun 13 '26
This. I feel like there's a group of people that feel threatened by how much opencode undercuts the major models.
1
u/Amarsir Jun 12 '26
It's possible the providers are serving quants to opencode but also why. It would just needlessly tarnish their product.
"Save money" might be the "why". Sell a buffet quality through the 3rd parties while maintaining the purity of their direct sales. It's not implausible.
However, if that was true there's no way that every provider would do it equally at the same time. We'd be seeing "Kimi seems worse through OpenCode, but Deepseek is just as good." Or vice versa or some other combination. It would be clear who's quantizing their models and who's not. And these complaint posts never seem to make that distinction.
3
u/arvind344 Jun 12 '26
i tested deepseek v4 on official API and opencode Go and found that opencode go modal is not doing proper tools calling, also the output of limited.
Direct API gives much better response and speed. i made my mind now, no middle man, but directly from the official websites, they also have reputation to maintain.
1
13
2
2
u/jedruch Jun 12 '26
Kimi 2.6 is tough for many providers, not only opencode. Apparently it has unique approach to tool usage that is hard to implement for others on the output side. You easily dive into issues with Kimi 2.6 on Openrouter at launch.
This kinda leans to your point about some models being better at their source, but it does not mean the issue is on Opencode side.
Also there were multiple posts on r/GLM claiming that GLM 5.1 directly from z.ai is trash and to see how mighty it is you need to switch to other provider. Which is completely opposite to what you claim
3
3
2
u/blowfishi7 Jun 11 '26
It takes 2 seconds to see if a models quantized
Run the same prompt through two different providers at the same temp
-1
u/ELPascalito Jun 12 '26
Most models are natively INT4 anyway you won't notice a lick of difference unless the provider has a botched setup (lots do in fact)
2
u/look Jun 12 '26
Only Kimi is natively int4. Literally the only one. Where do you even come up with this nonsense?
1
u/ELPascalito Jun 12 '26 edited Jun 13 '26
Go read the model card, DeepSeek, and Mimo etc, the expert weights are all INT4, all providers do mixed precision even fp8 and lower, some do QAT, it's clear you never read the DeepSeek release report, keep larping lol
1
u/look Jun 12 '26
fp4 is not the same thing as int4, but thank you for chiming in with your “expertise” here. 🙄
1
u/Addamdavidson Jun 11 '26
I totally agree with this thread, opencode go models are definitely nerfed. And I think the difference is higher with high class models such as GLM 5.1, Kimi K2.6, MiniMax M3, etc... Not to mention the monthly limit which is horrible.
4
u/Sea_Relationship_484 Jun 11 '26
How is it horrible? It’s $60?
0
u/Addamdavidson Jun 11 '26
Monthly limit can run out pretty fast you use high class models as glm, kimi, etc..
3
u/Sea_Relationship_484 Jun 11 '26
It can only run out in 2 weeks? And you’re using the expensive models so no wonder it goes down so fast? Also you pay $10 to get $60? That is the opposite of horrible
2
u/Kaushik_paul45 Jun 11 '26
What else are you expecting from a $10 subscription ?
Its giving way too much usage than the price we are paying.
Honestly I am just hoping that theh will continue to give us this usage.
1
u/JaMoLpE88 13d ago
You cry. You say: "I don't know for sure if it's because the models are quantized, and I'm not making a definitive claim here." So?
1
u/charmander_cha Jun 12 '26
Então não é uma mentira, você que contratou sem entender tecnicamente a tecnologia.
Não sabia que haviam duvidas sobre como funcionava estes provedores
1
u/hj-core Jun 12 '26
I think you need to use a quantitative approach and collect data to support your argument. For example, design a task and run it multiple times at different times (e.g., morning, afternoon, evening, weekday, weekend) using both the official API and OpenCode Go with the same harness to see if the results show that the official API is statistically significantly better than OpenCode Go.
1
u/NinjaWK Jun 12 '26
TBH, for majority tasks, except for very complex, the OpenCode free DeepSeek V4 Flash and MiMO V2.5 are good enough. Even Big Pickle (GLM 4.6) is pretty good.
If you want better models, frontier, Minimax M3 is unbeatable through their coding plan.
1
1
u/N0misB Jun 12 '26
This doesn't make sense from a whole business model perspective. I guess they are buying large quantities from the providers because if they would host it themselves, even quantized models, the pricing wouldn't match. It's way more expensive to host such big models than to just make deals with the original providers.
For me, it's very hard to believe. I will try out different providers. I was pretty happy with my plans, but I will definitely check out your comment. Maybe they do it the way you say, but like I said, I don't think that makes any sense. If you calculate even only for one model how much capacity you would need, for example, for Kimi K2.6, how many users you would need, and what the usage caps would be, it just doesn't make sense to me. Maybe someone else has an explanation for how they might do it. I guess they just have really good deals with the original providers and maybe get some left capacities or batch processing that makes it efficient enough to charge such low amounts.
1
u/TinBane Jun 13 '26
Use openrouter with opencode. Also look at deepswe, the common benchmarks are cooked, you can see how some of the models cheat or don’t fix the real problem. The open weight models, quantized or not, are not great for coding. I’ve spent 1000s of hours using LLMs for coding and other tasks, I was really disappointed with g5.1 and kimmi k2.6 when I ran it head to head with gpt 5.5 and opus 4.8. Which they apparently are within 5% of in many benchmarks. They just are not, they often don’t take even the right approach.
1
u/cmndr_spanky Jun 14 '26
Is it possible they just use different default params and it’s not some big conspiracy? Even just temp: 1.0 vs temp: 0.6 as an inference setting can make such a huge difference, it’ll make a 1T size model feel like a 4b size model for coding quality ..
Only way to test for sure is have a prepared coding problem that’s not a standard benchmark. Try it with different providers and share actual results. Your rant comes across as vibes and feelings but not definitive at all.
1
u/Unlucky-Message8866 Jun 16 '26
Fyi distillation != Quantization. And yeah pretty sure they serve at fp8. Get used because this is only getting worse go selfhosted
1
u/kitsunekyo Jun 17 '26
i think you might be mentally unwell from all the vibing op. all those em-dashes may have gotten to you
1
u/Aromatic-Document638 Jun 17 '26
I want a good quality model, and this honest piece based on experience has been helpful to me. If I were a provider, the services provided to opencode go would reduce costs by restricting output tokens. Limiting the output tokens will be detrimental to large or long-term tasks, even if the reasoning quality is similar for small tasks. Most users will likely find it hard to notice.
1
u/iseif Jun 24 '26
I have the same feelings as well, just cancelled my Windsurf $10 as I hated the weekly quota issues there and subscribed to OpenCode Go as I read a lot about MiniMax and GLM new models and in opencode go they was so bad for my cases which it sad. I cancelled my subscription as well.
1
u/8ffChief Oct 17 '26
Came onto this thread today, after trying out opencode go with MiMo v2.6 Pro. Quite disappointed, the model on opencode go plan seems very much dumbed down compared to the quality ive been used fo on OpenRouter.
1
u/wrines Jun 11 '26
I noticed the same gap from provider inference to an aggregator (for lack of a better term) like Opencode and ollama cloud and others like that.
I’m not sure if the inferences being served are distilled or quantized, but they are worlds apart from inference of the same models direct from a provider like z.ai or moonshot.
1
u/endr Jun 11 '26
I hear this benchmark is closer to reality than most.
Gpt 5.5 performs the best because Fable 5 isn't on there yet - it's the only one better right now.
So if you want better models, you probably need to pay $20/mo to one of the top two companies.
For OpenCode, you'd likely want OpenAi
1
1
1
u/Odd_Diver_2772 Jun 11 '26
yes I beleive you are correct, natively these model behind first party API work very well, through opencode go is afordable but quality drops off a cliff.
1
1
u/micqdf Jun 12 '26
im not reading all this slop lol but i will say minimax M3 and deepseek v4 none flash is fucking horrid models.
and generally open source models are far far behind GPT and claude.
mainly because they are openly benchmaxing...
GLM, KIMI, Qwen, Mimo are decent, but still far behind the flagships.
0
-1
u/Spare-Chest-7907 Jun 11 '26
I opened Reddit to post about this thing exactly but in the form of a question because I wasn’t sure and I don’t like to imply or assume anything. But wtf?! I opened three different sessions, three different tasks totally unrelated to each other, used multiple opencode Go providers. And it was the most retarded session of my life. I ended up fulfilling all three tasks by hand!
One was simple frontend, the other was text analysis of an obfuscated JS malware which was dead simple to de-obfuscate by hand and the last was backend in JS.
Spent 8 hours trying to figure out why it was so retarded. GLM even started talking Chinese at some time 🤡
I CAN TOTALLY CONFIRM THAT THERES SOMETHING WRONG WITH THE GO PLAN!
I have DeepSeek-V4-Flash self-hosted, and it is already superior to the same model in Go.
4
u/NefariousnessPrize43 Jun 11 '26
Skill issues
2
u/Dingosavedyourbaby Jun 12 '26
You want to be sympathetic, maybe even help them understand what they are experiencing, but then the morons drop a slur and suddenly it’s much easier to just chuckle and shake your head at their ineptitude.
0
u/chainer0x Jun 11 '26
Never tried opencode go, instead hooked opencode to openrouter with pay as you go, it's expensive.
But, Have gwmini pro and claude pro for most work, opencodde is just a backup for me
0
u/FinancialBandicoot75 Jun 11 '26
It’s 10 bucks, duh, just like how copilot was using less version of Claude.
0
0
0
u/look Jun 12 '26
Are we playing “tell me you have no idea what you’re fucking talking about in only 2000 words”?
-4
u/Just_Lingonberry_352 Jun 11 '26
However, after testing OpenCode Go extensively with some friends for nearly three months, almost none of the models seemed incredibly good; they were just okay.
Nobody serious about Agentic coding uses OpenCode no offense. All the praises and noise you see on Reddit are people who are not paying or paying the minimum, they balk at the $200/month plans as being excessive because the value of their work doesn't justify it.
Again this should be a warning against those that view and act on Reddit information when it comes to agentic coding (and probably any serious paid tools) that you are reading/arguing with mostly people that these companies are trying to get rid of because they are cost leaders
So it makes sense all the bottom of the barrel demographic is flocking to opencode and expecting all sorts of grand things.
The "small gaps" you note is a great example of the bias present on this subreddit and opencode users. The gaps are very apparent when you wield it with a large team across diverse codebases.
Opencode Go will be okay for cost conscious budget consumers of ai users for hobby work but they definitely do not sway the market or the rest of us using frontier models for serious work. There is a reason many of us pay $200/month for GPT 5.5 or Anthropic because we know that "small gap" is actually very large and it doesn't make sense to create more context overload and shoddy coding by cheaping out.
6
3
u/Worldly-Savings4113 Jun 11 '26
This feels like an uncalled-for and extreme rant, missing the point of OP's question (which I'm not even sure is legitimate or not). It’s obvious that frontier models are superior to the ones available in OpenCode Go, but that doesn't downgrade OpenCode Go to a mere toy for hobbyists. I use it at work and even pay for the subscription out of my own pocket, since my company provides me with a Copilot Pro subscription that is now completely useless. For my use case, I find OpenCode Go to be a godsend; it gets the job done and obviously requires my intervention, just like any other work produced by LLMs of that tier. In fact, I used to hit the exact same limitations back when I was using GPT 5.4 and Sonnet 4.6.
-1
u/Just_Lingonberry_352 Jun 11 '26
you use it for work that doesn't justify frontier models
tanks for sharing
1
u/Worldly-Savings4113 Jun 11 '26
Maybe so. Give me a clear work scenario that absolutely requires a frontier model, and I'll tell you. However, if I remember correctly, until less than a year ago, any kind of work required a developer, not a frontier model.
1
u/Fatso_Wombat Jun 11 '26
I run full max claude code.
he has a hermes pet agent that does the cron work. check the mails, organise and label things, check for mentions on team's worksheets and stuff. it runs on opencode go.
i wouldn't trust any of the LLMs on OC-go to do full work, but formatting up a document into a template? excellent.
it was my answer to the changes in billing, and it seems to work well so far.
with increasing in prices (fable 2x) routing away to lower cost models will be more important.
0
Jun 12 '26
[deleted]
1
u/HelioAO Jun 12 '26
While you are being polite and defending your point, several people here are being extremely offensive and, at the same time, vacuous.
0
Jun 11 '26
[deleted]
1
u/ShivamJha01 Jun 12 '26
Yeah they're terrible. Their scammy founder will call you an idiot if you say that it's an inferior product
1
1
Jun 13 '26
[removed] — view removed comment
1
u/HelioAO Jun 13 '26
Yes, I mentioned that in my text. I just regret that it turned out so long, but there it is.
1
Jun 13 '26
[removed] — view removed comment
1
u/HelioAO Jun 13 '26
I agree with you that version 3 is incredibly good, but like I said, I prefer using the official provider.
12
Jun 11 '26
[removed] — view removed comment
7
u/BoThatch Jun 11 '26
Aren't you mixing things up here? Where is the connection between "Inference Provider on the Hugging Face Hub" and its integration in the coding harness opencode (most likely as known provider, so you can use huggingface inference offer directly inside opencode) and opencode go as inference service? Or do I misunderstand your comment?
5
Jun 11 '26
[removed] — view removed comment
10
u/BoThatch Jun 11 '26
Ah cool, thanks for the hint. But the rest is official api, so it only affects GLM. Good to know.
2
134
u/PM_ME_UR_0_DAY Jun 11 '26
Small note: I'm pretty sure people are accusing them of using quantized models, not distilled