r/nicechips • u/150c_vapour • 3d ago
r/nicechips • u/snops • Apr 11 '21
Diodes/Pericom PT8A2514A Toaster Controller IC. All your toaster timing needs in a DIP8. $0.79 for 50
r/nicechips • u/eightfour7two • Feb 25 '21
SMD Solar cells
https://www.digikey.com/en/products/detail/anysolar-ltd/KXOB25-01X8F/9990432
Thought these were pretty nifty. Small area (22x7mm), SMD solar cells which can be reflow soldered.
These are mono-crystalline silicon, which are around 25% efficient compared to the 10-15% in the common polycrystalline small panels.
They have 0.7V, 2V and 5.5V versions, so might be useful for low power IoT/beacon applications
r/nicechips • u/mofosyne • Sep 09 '20
HP 1820-1691 : Inside the HP Nanoprocessor: a high-speed processor that can't even add
r/nicechips • u/DrunkenSwimmer • Nov 23 '21
Renesas introduces sub 50 cents FPGA family with free Yosys-based development tools
r/nicechips • u/nic0nicon1 • Dec 22 '21
ADL5960 - Vector Network Analyzer front-end on a chip, 10 MHz to 20 GHz
r/nicechips • u/Enlightenment777 • Mar 13 '25
TI MSPM0C1104 : World's Smallest MCU is 1.6mm x 0.861mm in DSBGA-8 package : 24MHz ARM Cortex-M0+, 16KB Flash, 1KB SRAM, 2 Internal Oscillators
DSBGA-8 package is 1.38 mm² and costs USD$0.20 each in a 12K reel:
Product Webpages:
16KB Flash = https://www.ti.com/product/MSPM0C1104
8KB Flash = https://www.ti.com/product/MSPM0C1103
Block Diagram:
8-pin Packages:
DSBGA-8 is 1.6mm x 0.861mm. <---
WSON-8 is 2mm × 2mm.
SOT23-8 (0.65mm pitch) is 2.9mm × 2.8mm.
16-pin Package:
SOT23-16 (0.50mm pitch) is 4.2mm × 3.26mm.
20-pin Packages:
WQFN-20 at 3mm x 3mm
VSSOP-20 at 5.1mm x 4.9mm
TSSOP-20 at 6.5mm x 5.0mm
Development Board:
LP-MSPM0C1104 with VSSOP-20 target (USD$5.99)
r/nicechips • u/gussy27 • Jan 18 '19
GL850G - 4 port USB 2.0 Hub IC, <$0.30 @ 100qty
This one is a Chinese market chip, but is readily available from LCSC for <$0.30 in 100qty, and is available in a hacker friendly SSOP-28 package.
I'm trying to revive this sub with the backlog of "nice chips" from my own notes. Let me know what kinds of chips are/aren't interesting to you!
r/nicechips • u/jenesaisdiq • Jun 12 '20
TMC5041: Dual stepper motor *controller*
This is a magic box. You send it either a location or a velocity (via SPI), and it manages _everything_. Computes and controls lovely velocity curves. Works hard to avoid step loss. Runs your steppers "silently". All of this without your uC wasting time calculating and banging STEP/DIR pins like a caveperson.
https://www.trinamic.com/products/integrated-circuits/details/tmc5041-la/
The 5041 can drive 5-26V and 2x 1.1A with no additional FETs. It's the dual driver P/N, though they also have other options in the family for single and/or higher amperage. I'd start with this one because there's a 5041-BOB available on Digikey ($19).
The upsides are hard to overstate. The downsides are... nontrivial. First, it's too expensive to use for most consumer products- lowest price is around $4.50. There are no knockoff, drop-in substitutes I've found.
Second, you have to learn the datasheet. For real. There are a lot of config registers, all need to be set, many of the settings need to be calculated in relation to others beforehand, many of the modes are incompatible despite being on different bits so they can be set simultaneously. It is a mess. They included a couple of flowcharts, but... someone needs to build a calculator for this with a nice UI. Their examples are misleading (though they work) because they've chosen to write the config registers in hex, and the bits that need to be set don't line up with the 4-bit hex blocks... so a setting will have it's high bit and low bit broken across two hex chars. If you choose to use this IC, you will be much better off writing them out in binary.
I started writing a library for this to make it easier, but didn't finish it. Lmk if you want to make a go of it: https://hackaday.io/project/158935-haroco-the-designlab/log/149276-fancy-stepper-motor-controller-update
In contrast to the last two posts, this IC is not cheap. It is not easy to use. But it *is* a fundamental improvement to how you've used stepper motors before.
r/nicechips • u/eightfour7two • Jan 15 '21
5 W isolated AC-DC power supply inside an IEC plug
https://recom-power.com/pdf/Powerline_AC-DC/RAC05-K_C14.pdf
Not strictly a chip, but a pretty cool all-in-one solution to get mains AC into 3.3-24V DC
r/nicechips • u/interoth • Aug 13 '19
DW1000, a single-chip wireless transceiver for indoor positioning down to 10cm precision
r/nicechips • u/janoc • Feb 05 '23
Sub $0.1 Cortex-M0+ - PY32 series from Puya
This is actually cheaper than even the recently posted WCH micro and the parts seem like improved variants of STM32F030 series (but not compatible with them). Even better, the parts are available today, in quantity from LCSC:
https://www.lcsc.com/products/Microcontroller-Units-MCUs-MPUs-SOCs_11329.html?keyword=PY32
So much for the arguments that one can't have cheap ARM micros because of the ARM IP licensing costs.
r/nicechips • u/lefeh • Jan 25 '23
A111: 60 GHz Pulsed Coherent Radar - Integrated Baseband, RF front-end and Antenna in Package
I used this chip for a job to measure liquid-levels. Really cool and works well but it seemed to be a bit complicated to create the FW/SW for it.
https://www.mouser.se/ProductDetail/Acconeer/A111-001-TR?qs=eP2BKZSCXI7cb1tJ4izqfA%3D%3D
r/nicechips • u/eightfour7two • Jan 14 '21
SD card on-a-chip
https://lcsc.com/product-detail/FLASH_XTX-XTSD04GLGEAG_C558839.html
8x6mm, 8-pin chip that behaves exactly like an SD card, with both SD and SPI modes.
r/nicechips • u/nic0nicon1 • Jun 08 '21
List of Microcontrollers with Fast Analog-to-Digital Converters
r/nicechips • u/zip117 • May 19 '21
TI IWR6843AOP: single-chip, 60-64 GHz (mmWave) FMCW radar with integrated antennas (on package!), $27.52
ti.comr/nicechips • u/snops • Oct 24 '21
ST VL53L5CX - Time-of-Flight 8x8 multizone ranging sensor, 6.4*3.3mm, I2C Interface
r/nicechips • u/interoth • Nov 27 '19
Surface mount (0603) percussive explosive detonators
ttelectronics.comr/nicechips • u/ArtistEngineer • Feb 05 '19
"Allwinner V3S" 1.2GHz ARM A7 , 64MB RAM, UART, SPI, I2C, USB OTG, PWM, audio CODEC, camera, LCD, $1 to $3, TQFP128.
r/nicechips • u/snops • Aug 05 '20
LT8714, 4 quadrant dcdc convertor, 5A in any direction and polarity from a single supply
r/nicechips • u/jenesaisdiq • Jun 09 '20
AW9523: 16 channel, I2C IO expander *and* LED driver, ~$0.16
This awesome little TQFN24 chip can work as either an IO expander or an LED driver OR both simultaneously! Prices down to around $0.16 in quantity on LCSC, and lower when negotiated. It's I2C so using multiple on a signal line is easy, and address can be set by pulling the two address pins high/low. Will definitely keep using these.
https://www.awinic.com/en/index/pageview/catid/19/id/15.html
Used a Schmartboard breakout when originally prototyping, and that made hand-soldering the 4mm2 package reasonable.
r/nicechips • u/jenesaisdiq • Jun 09 '20
STM8S003F3P6: 16MHz, 3 timers, UART/SPI/I2C, ADC, 8K/1K, TSSOP20, only $0.20
This is the cheapest MCU I've found that can still be used with the usual toolchains. GDB, gcc, and programmable via SWIM, plus they sell a nice devboard. Plus it actually has enough pins to handle most of my applications, especially when paired with the previously mentioned AW9523.
$0.20 is the MOQ1000 off LCSC, but I've gotten quantity quotes down to $0.16 from Chinese vendors.
TSSOP is a pro if you're cost sensitive but not space sensitive. Leaded packages let the PCBA shop use Automatic Optical Inspection, whereas BGAs and the like have to be x-rayed. AOI vs x-ray for QA matters in the sub-$10 BOM range for me. Oh, and TSSOPs are easy to solder, both for your and your factory.
Other upsides: ADC. Internal clock. Internal regulation, 2.95-5.5V. Has a 32-pin package you can upgrade to, as well as higher memory options... though not nearly so cheap. ST will preprogram them if you're buying enough, though it's comparatively pricey.
Downsides: 8k/1k is pretty snug, so you'll have to be efficient. 8-bit is fine for most things, but if you're looking for fast compute of floats, this isn't what you want. No DAC. No I2S.
https://www.st.com/en/microcontrollers-microprocessors/stm8s003f3.html
r/nicechips • u/hblok • Jan 13 '23