r/myog • • 8h ago

Project Pictures Integrating TPU 3D Prints with Fabric

Thumbnail
gallery
167 Upvotes

Apologies if this is old news, but I'm new to the MYOG space. Nevertheless, I'm just showing off this project in the hope that it may generate some ideas for your project. Please don't judge my sewing -- I'm a newb!

I come from a 3D printing space and I've been using "flexible" TPU for an increasing number of projects. TPU is essentially indestructible -- it Bends and doesn't break. Turns out, it is also soft enough to stich directly to fabric materials. I think there is potential here, for integrated stiffeners, sewn-in D-rings, more?

This project was about creating a near zero weight "Lantern" that I could attach to a clip light or headlamp. In this example, the light source is an O-light clip. Earlier versions (without the TPU component) made for nice sittin' around ambiance in a dark camp. I'm looking forward to getting this unit out on the trail.

I think the pictures best tell the story. The thin TPU stiffener sewn into the lantern sack and the 3D printed "clip" to attach to the light are very light weight.

Also, One image shows how a quick 3D print can make for great templates for marking the cuts.

Anyhow, have a great day, and thanks to all for the generosity and ingenuity of this community. Maybe this will seed some ideas for others!


r/myog • • 9h ago

Hip bag - first try

Thumbnail
gallery
68 Upvotes

First try with this pattern, I've seen some bags similar to this and thought I'd have a go at making my own. Made my own pattern for it. Just need to tweak a few things.

Also maybe add a lining and some inside compartments.

Let me know what you think! Some BTS shots too!


r/myog • • 9h ago

First seat!

Thumbnail
gallery
59 Upvotes

Not exactly gear but it’s the first “meaningful” thing I have made so far. Got some fire rated leather and redid one of the seats on our plane. Eventually I’d like to redo all of them. The before of the seat-back is the last picture.

I got our machine for some MYOG but decided to try my hand at this as well. Lot of lessons learned and the next will only be better (too much glue, need better guides, be patient, etc).

For those curious, I got that full hide for a discounted $100.


r/myog • • 1h ago

The pattern tacker lives! Now I'm looking for someone to help me print clamps

8 Upvotes

If anyone with 3d printing experience would be interested in helping me build clamps for this machine, please reach out!

This video shows a very very janky clamp I built


r/myog • • 7h ago

Project Pictures First top tube bag

Thumbnail
gallery
11 Upvotes

Made out of scraps from backpacks. Used Learn MYOG’s pattern.

This was a test go—definitely going to add some mesh pockets on either side. I think I’ll also make a longer one to increase the volume for bikepacking rig. Maybe a pull tab to make zipping it shut a little easier.


r/myog • • 4h ago

Question Advice on sewing compartments into backpack?

Thumbnail gallery
5 Upvotes

r/myog • • 21m ago

Question Rain suit -- can I just use a shower curtain liner or waterproof tarp?

0 Upvotes

I don't care about the aesthetics and it doesn't need to last forever. It doesn't need to be warm; I'd actually prefer it be as thin/light as possible and take up the least amount of space as our backpack's already bursting.

I just need to get out of the house with my toddler when it's raining, and I want him to be able to go down the slides when it's raining or walk through a muddy forest and maybe play in the puddle. And I want it to fit him... and despite being a 3T in some brands, the 18mo rain suits look like they'll fit him when he's an 8yo child (what's up with that?!). I'd also like some rain pants for myself when he asks me to sit in the puddle-filled sandbox with him and go on the trails. We've tried multiple brands and sizes (for him) and are returning them all. They were also super expensive, and super thin, like plastic bag thin. We found one highly recommended brand we'll try next, but it'd be hundreds... which is somehow more than our cashmere and wool gear?!

We do have wool/cashmere and know we can lanolize overnight to make water... resistant? So I'm fine with it not being 100% perfect as a rain suit with warm water resistant stuff underneath.

Anyway. We do not actually have any garbage bags, but do have an unused shower curtain and a sewing machine. My skills are rudimentary, but it'd be free to try. I also see very cheap plastic sheets online. And honestly, I do NOT want 'fabric'. I don't want something soft and fabric or fabric-like; I want cheap plasticky covers over our clothes I can just kind of rinse mud and sand off of without having to launder it.

Has anyone done this? Can I use a shower curtain liner that's labeled as waterproof? If so, is thinner or thicker better? Can I use like a tarp sheet instead? If neither would work, what do you all recommend?


r/myog • • 4h ago

Question Any other vendors sell fidlock stow/holsters like Thermal Lift Workshop?

Thumbnail
reddit.com
1 Upvotes

I know this sub is more maker focused, so forgive me if this is against the rules.

But I thought it was worth posting here if anyone that makes their own gear and has made something similar, or knows someone that has.

I'd be interested in connecting to see if I could commission one.


r/myog • • 8h ago

Prickly Gorse 50L vs 60L

1 Upvotes

Does anyone know if there's much difference between these two patterns. Based on no actual experience, I'm enamored of the Durston Gear 55L Kakwa. My basic requirement is to be able to pack a BV500 horizontally.

I'm torn between the Gorse 50 and 60, but my gut tells me that there's really no difference, and that I could get either and either slightly enlarge or reduce the patterns to get to 55.

Any advice? Thanks.


r/myog • • 10h ago

Question Best way to reinforce bag seams

1 Upvotes

I’m wanting to make a bag similar to the Jenni bag for a friend that travels often. It’ll be my first time making a bag but I’ve figured out the construction and outside fabric material but I’m struggling with how to reinforce the seams along the zipper that make it a bag. For anyone who hasn’t seen it, the Jenni bag is essentially a duffle bag you can completely zip open, since it’s zip open I know a lot of stress will end up on the zipper. I would also appreciate some help in figuring out a zipper strong enough to hold this weight. I was thinking the brass continuous zippers sold on wawak, any help would be appreciated.

Can you do piping along a zipper and would that help reinforce it? Should I add buckles in a few places just in case the zipper fails and would that help take some stress off them?

Also, what do people usually use for lining? I’m planning on some cute cotton fabric lined with some lightweight iron on interfacing.

Thank you!


r/myog • • 2d ago Mindblown

Project Pictures Quilt block down quilt! Edge tensioning, draft collar, 24 oz, ~15 degrees

Thumbnail
gallery
1.1k Upvotes

Finally finished the quilt I’ve been working at off and on for the last few months! I’m absolutely thrilled with it–it’s probably my favorite thing I’ve ever made. I have a lot of garment sewing/quilt making experience, but this was my first dip into making my own gear. 

Quick specs:

  • 670g/23.6oz

  • 16 oz 950 FP goose down (Allied)

  • 25% overstuff (...in theory)

  • Planned for 3.5 in. loft, ended up with closer to 4 in.

  • Temperature rating TBD, but I’m estimating 10-15 F

  • 66 in. tall, 54 in. wide at the top, 11.5 in. diameter footbox

  • Sewn footbox

  • 0.66oz MEMBRANE 10 taffeta nylon (3yds each color) from RBTR

I can’t recommend a project like this highly enough–it was a super fun process. There are a few things I would have changed (some of that stitching…), but at the end of the day I’m over the moon about it. I think it’s going to be a great quilt and I love that I was able to make something different from anything I could have purchased.

I found writeups here super helpful so wanted to share my design/planning/sewing thought process as well. Happy to answer any questions about planning/construction if I missed anything–I hope this is helpful!

–

Design/Planning

I’m planning a PCT thru in 2027, so this project was largely made with that in mind. 

My primary goals were for it to be comfortable down to 15 degrees (for a cold sleeper), weigh less than 24 oz, and cost around $250 or less. I haven’t been able to test it yet so TBD on temperature, I squeezed in just under 24oz, and I probably ended up spending around $300. My secondary goal was for it to look cool.

To get the dimensions: I added two inches to my height and I think that worked great. I probably could have gone with my height exactly and been just fine, but I like a little bit of extra room to move around/duck my head in if I want to. I kind of eyeballed the width–I have a relatively small frame so I went with the lower end of the widths I had seen other people use and checked with a bedsheet to make sure it felt reasonable when I laid on my side. I got the footbox measurement by measuring how long my feet are and adding ~1.5 inches. 

Figuring out how much loft I needed for my goal temperature rating was a little bit of a rabbit hole! I had seen the Enlightened Equipment temperatures referenced fairly frequently, but given the criticism I’d heard about their temperature ratings in general I was reluctant to rely on them. Ultimately, my process was to spend kind of a long time on various manufacturer websites to compile data about their reported temperature ratings/loft height and then pick a height that corresponded to a 0-degree quilt for most manufacturers to account for the fact that I’m a cold sleeper. I ended up going with 25% calculated overstuff, mostly because that got me to exactly 16oz of down so I could just order a pound from Allied. This is one thing I’d do differently–I think bumping up the overstuff would have been worth it.

I was shooting for 3.5 inches of loft, so I cut by baffle strips to 3.5 and sewed with ¼ in. seams for a finished baffle height of 3 inches. I was originally going to go with a finished baffle height of 2.5 following the advice recommended by a few comments here (basically just subtracting an inch), but I chickened out at the last second and bumped it up a bit. My actual loft ended up close to 4 inches, so I actually think 2.5 would have been the right call. My reasoning at the time was that I’d rather have more loft than expected than not enough, which I think is probably still true, but what I didn’t take into account was that by inadvertently increasing my total loft without increasing the down fill, I actually bumped my overfill down to around 15%. One day I’ll feel inclined to open it back up and add some extra, but I’m sick enough of dealing with down at this point to leave it be for a while.

I included a cinchable draft collar (3 in. diameter) with snaps on the ends and a draft-control tensioning system along the sides inspired by the original Mid-Atlantic Mountain Works system. I modified it by having the elastic route through five grosgrain loops on each edge rather than one continuous tube, mostly to simplify construction. If I were to do it again I’d probably go for the continuous tube to avoid concentrating as much force in only a few areas of the fabric, but I’m not too worried about it either way and I really like the feature.

For the pad attachment system, I used ⅜ in elastic from my stash to go around my pad and glow-in-the-dark (!!!) side-release buckles from RBTR to attach to the quilt. This is definitely not the most UL system out there, but the only complaint I’ve had when I’ve tried quilts in the past has been how fiddly some pad attachments are, and this is super easy to use, so I’m happy with it. Also, it gave me a chance to use the glow hardware, which I’m really delighted by. 

I used the MEMBRANE 10 taffeta from RBTR in white for the outside and olive yellow for the inside/accents (3 yd each). White is not the most practical combo, but I LOVE that you can see the down and I really like the combo with the green, so I have no regrets. I was nervous that the fabric would feel too much like sleeping in a plastic bag, but I actually don’t get that feeling at all, especially once it was filled with down. I also considered Argon 67 and actually liked the feel a little better, but I didn’t love any of the colors. My baffle material was 0.9oz noseeum–I chose this weight solely because it was the only one in white and I didn’t want it to be visible through the body fabric. 

Construction

My first step in constructing the quilt was piecing the central quilt block together, which wasn’t nearly as tricky as I expected. I was worried that the fabric would be too light/slippery to get any real precision, but with a rotary cutter + quilting rulers + very liberal use of a glue stick I got through it just fine. This part was a totally standard quilt block construction except I used ½ in. seam allowances instead of the typical ¼ in. to give the taffeta extra stability. Then, I pieced together the rest of the exterior panel around it. 

I cut out the interior panel, the interior/exterior footboxes, and a rectangle for the draft collar and double fold hemmed all around both panels and footboxes and the short edges of the draft collar. 

Cutting out baffles was tedious, but is another place where a rotary cutter is super useful. I used little chalk pencils to mark placement on the panels and then glue sticked into place, which worked great. I sewed the vertical baffles before the horizontal baffles on advice from a commenter here, which I wouldn’t have thought of but was a very good call. Sewing the baffles to the second side wasn’t bad at all–I marked all of the lines first, kept a glue stick handy, and kept the extra fabric organized and it went pretty quickly.

With the baffles done, I sewed together the sides to get them ready for down, leaving the top and one of the bottom sides open. While I was sewing, I inserted five equally spaced grosgrain loops along each side for the pad attachment/shock cord routing (I think this is probably not the best way to do a draft control tension system, but gosh is it easy!). I did the same thing for the footbox, sewing almost all the way around. 

To prepare the draft tube, I added a reinforcement patch of several layers of the taffeta and installed a few eyelets slightly off center for the cinch. I folded the long edge over by about an inch and sewed one line of stitching half an inch from the edge to create a channel for the elastic, then folded the entire thing in half, long edges meeting, and sewed over the same line of stitching to create the tube for the down. I end up with an elastic channel and a down tube joined half an inch from the raw edges, which I’ll insert into the top of the bag when I close it later. I sewed one end shut, inserting two grosgrain tabs for snaps.

Filling the bag with down was the hardest part of this process. The method I ended up with:

  1. Set up a tent in your living room

  2. Assemble supplies: scale, enormous bag of down, binding clips, empty quilt, small noseeum bag, mini shop vac I bought at Target for $30 (absolutely worth it)

  3. Use little rubber hair ties to secure a scrap of mesh around the nozzle of the shop vac

  4. Important: keep the shop vac directly outside the tent and zip the door of the tent so the tube can get through, but the body is outside so the air being blown out doesn’t mess with everything. I learned this the hard way.

  5. Put the noseeum bag on your hand inside out like a mitt and grab a big hunk of down from the bag

  6. Weigh the bag and make a note

  7. Grab a handful of down from the bag and put into the baffle. Down clusters will go everywhere, but that’s why we’re in a tent indoors

  8. Use the shop-vac to grab the excess down stuck in the noseeum bag/the down that is floating around in the tent and add to the baffle

  9. Repeat 5-8 until you’ve reached the goal mass for that baffle, then roll up opening and clip in place

  10. Repeat 5-9 for each baffle

  11. Thank your roommate for having the patience of a saint

There's a lot I would do differently here:

  • A tent was super important for me, but I'd recommend using a bigger one if you can–a one-person was very tight

  • My scale only measured down to the gram, and since I was measuring three or four little bags of down per baffle, there’s a decent amount of room for error there. I ended up pretty accurate, but I was nervous about it.

  • Wear a respirator/mask–I was definitely breathing in some feather fragments

  • I would have liked to have all of my down on a scale and measure it out by removing it, but I couldn’t figure out a way to make it work without decanting the down/using a much bigger space

  • I saw a few people referencing a PVC pipe device that they used to measure all of the down for each baffle, then used a plunger to transfer from the tube to the baffle and I think that’s a brilliant way to do it–I wish I had looked into it more. If I ever do another one of these, that’s how I’ll do it.

  • If I did it using my little bag again, I’d try making it out of the taffeta so down didn’t stick quite as much.

With the down filled, I sewed the remaining edges shut. The footbox and bottom side was straightforward and the draft collar just required inserting tabs for snaps as I sewed. The top was more complicated because I was also attaching the draft collar at the same time. The idea is to insert the raw edges into the quilt so the lines of stitching on the draft collar are lined up with the hems of the body of the quilt, and then sew it all together very close to the edge of the body. The hardest part of this is making sure everything is lined up so that you’re catching all of the layers as you sew and keeping it in place, so a glue stick is super helpful. I suspect there’s an easier way to do this, but this is what I came up with, and I’m happy with the result!

The last step was closing the footbox. I was worried about matching up the circular footbox, but it wasn’t a problem at all–be careful with seam allowance math and give yourself guide markings to help line it up and it’s not too hard.


r/myog • • 2d ago

Project Pictures Zippered 3 compartment fanny pack NSFW

Post image
384 Upvotes

Made this zippered 3 compartment fanny pack for a friend for Christmas. The top two compartments have upward facing zippered for quick access and the bottom middle compartment has one long zipper on the side. Made with 500d Cordura and 1” nylon webbing.

I'd like to offer an apology to whoever's grandma owned the Singer 403A that I made this with


r/myog • • 1d ago

Question Adding a fly flap to existing pants

2 Upvotes

I'm looking to modify some cheap track pants into an insulation layer under shell bottoms for skiing by shortening them to 3/4 length, and would also like to add a fly off some sort.

Adding a zipper seems like unnecessary faff and weight, but can anyone give advice on how to add an overlapping 'flap' or similar to make it a bit nicer than just cutting a slice?


r/myog • • 1d ago

Brador Commander Fabric

1 Upvotes

Might be a question mostly for the Canadians here, but does anyone have any experience with Brador Fabrics? Specifically the Commander line.

It seems to be a pretty popular fabric but there don't seem to be any mentions of it on Reddit. Almost no reviews I can find, or project pics that aren't on their website.

I am thinking about making a jacket from it, since it looks like a really nice tight weave 6oz/200gsm poly-cot blend. Maybe add a wool liner, and maybe a coating of Greenland Wax. Still just kicking ideas around.

https://www.bradorfabrics.com/collections/commander?srsltid=AYCX9vKtxTAVv3IfKRnIUZ9k-nNcSgfNOFx48XjAXlXsGOmSWe_zNFAG


r/myog • • 3d ago

Project Pictures A cooler ski bag

Thumbnail
gallery
174 Upvotes

I’ve been travelling for 6 years now and every step of the way I have brought my size large north face base camp duffel. It’s tough as anything I’ll ever need and looks great too (imo).

However, when I got into skiing and then knew I wanted to travel with ski gear, I couldn’t find anything existing that was both as tough as I’d like (regular ski bags often get torn up by baggage handlers), or as stand out (most ski bags look the same).

So my engineer brain thought; “why not just sew three north face bags together”. And that’s what we did. (We being myself and a mate that conveniently has a degree in textiles)

We spent about 2 hours prepping the bags and removing all the stitching we needed to. Then sewed outer faces together with a zigzag stitch before folding it all right way out again. All done with a singer heavy duty which coped fine apart from the shoulder strap seams which we needed to use the hand wheel for.


r/myog • • 3d ago

Project Pictures Does super thick wool sweaters count as myog? I think they should!

Thumbnail gallery
498 Upvotes

I come from the craft world and have made a few tarps and backpacks, and I think that thick wool sweaters are amazing as gear!

There’s a few boiled wool anoraks that I was looking at for outdoor winter activity. Decided to look into knitting and here’s what I made. It’s made out of a very thick and fluffy woolen spun yarn that traps a lot of heat and air. There pattern has colorwork which means it’s got 2 layers of yarn in most sections and 3 layers of yarn in the yoke so it’s very thick and traps a lot of air. It’s incredibly warm and will become one of my most used pieces in the winter. You can always put a windproof layers above this. I’ve been moving away from plastics and I’m all in on wool now.

Plus! If you knit your own winter sweater you can choose the colors and pattern! It’s real wool so if well taken care of this will last a lifetime or two. I don’t think hand knit garments get enough talk in the outdoor gear convos.


r/myog • • 2d ago

Material for ultralight hiking pants

1 Upvotes

I have the these regatta trousers which were very good last season at 270g but want to make some lighter and save myself some money. These Houdini m's pace pants are the nicest looking lightweight I've found at 125g which I understand use: C9 Stretch polyester, an ultralight, woven fabric weighing 67 g/m.

I'm trying to find out what this material is or some similar poly lightweight material. I've been looking on Alibaba but not sure what this is.
https://houdinisportswear.com/en-na/products/ms-pace-light-pants-sandstorm-860014_148


r/myog • • 2d ago

What type of zipper is this?

Thumbnail gallery
1 Upvotes

r/myog • • 3d ago

Project Pictures Bicycle handlebar bag

Thumbnail
gallery
30 Upvotes

Today I finished this project, a handlebar bag with capacity for a set of 17cm diameter pots, plus additional space for small items.

And to hold it up, a simple support made with a bent metal bar, which is secured from the stem of the bicycle.

I hope you like it.


r/myog • • 3d ago

Looking For #5 YKK Uretek or Aquaguard

3 Upvotes

Feels like I’ve spent a solid couple hours looking for quality WHITE water resistant zipper. Anyone know where I can find it? Also does anyone have experience with contacting YKK directly for myog or small sample purposes and how’d it go?


r/myog • • 3d ago

Does Mara thread get stuck under the spool for anyone else?

Thumbnail
gallery
10 Upvotes

It happens on all 3 of my sewing machine, whether I feed vertically like this or horizontally. But I can't find any reports of others having this problem. I've tried using the smooth cone adapters, felt, cap, no cap... nothing has helped. Surely I'm not alone and uniquely cursed?

Oh, and when it doesn't get caught under, it gets wrapped around the TOP of the metal rod, causing more tension.

Anyhow, I made this simple cylindrical stand to solve both issues, and so far it's working great. On the off-chance anyone else is battling this, here's the 3d file (customizable too): https://makerworld.com/en/models/3638531-gutermann-mara-thread-adapter#profileId-4173085


r/myog • • 3d ago

Seam taping a rain suit

4 Upvotes

I'm making a rainsuit out of a waterproof coated nylon ripstop. The goal is a lightweight all in one suit that I can put on over whatever else I'm wearing to get protected from the rain.

Seam tape is obviously important with this material to be as effective as possible, but to both not waste time/material and to hopefully avoid creating just a sweat sauna any more than necessary, I'm thinking of leaving some seams untaped.

Seams I am definitely taping: shoulders, front and back yoke seams, collar seams.

Seams I'm debating and would love input on: underarm, bodice side seams, outer leg seams, inner leg seams, waist seams.

I thought I'd ask some other gear makers who have perhaps made rain suits, raincoats, or rain pants before and see which you think are important to tape, important to not tape, or just don't matter much either way. Thanks!


r/myog • • 3d ago

Bag valve mask pits and bits bidet design challenge.

1 Upvotes

I had an idea to use a bag valve mask from a medical ambulance bag and convert it to a pits and bits bidet. I was thinking hand held bidet in through input of mask and a drainage tube out the same way. Not for ultralight, obviously.


r/myog • • 3d ago

What do you use to keep all your hardware tidy and organised?

4 Upvotes

Looking for storage ideas to keep all my bits and bobs organised rather than just loose in a box!