r/mossberg • u/556Ambassador • 4h ago
r/mossberg • u/inexperienced13 • 23h ago
Last shell binding on maverick 88
Does anyone have the same issue where the last round of the tube on the Maverick 88 security will hang up, and you cannot easily dislodge the follower? This happens before the shell hits the shell catch on the receiver. However, I can still load a full tube without binding.
Any tips? It’s only hanging up at about the last 3.5” roughly. The shell rim will be about 1/4” away from the shell catch on that last round.
Woolf enhanced power springs? I’ve already tried cleaning, polishing with 600 grit on all surfaces inside and compound, and cleaning and lubricating it. Still no cigar. Happens probably 1 in every ten tubes cycled through. Has anybody ever had this happen and what was your solution?
r/mossberg • u/Nothin_face • 1d ago
14" barrel for 590m
Looking for a shorter barrel but the kits seem to be sold out everywhere. Does anyone know where i could find the kit?
r/mossberg • u/Unable_Donkey_1016 • 2d ago
590 Rm Chisels & 590RM Breacher Professional
Sbs & aow
r/mossberg • u/daleboi4432 • 3d ago
First Mossberg
Always wanted a Trench Gun style shotgun, but could never stomach the ludicrous prices of original military shotguns
And Mossberg's Retrograde 590A1 was excellent, but I was a fan of the ghost ring sights, and just wanted a bead sight, but they do not currently make a 590A1 with a bead sight, so I made my own
So I got the standard 9 shot 51660 Mossberg 590A1, and some original wood furniture from a 500 ATP, and sling swivels and heatshield and made my preferred shotgun set up, really enjoying the look and can't want to take it out to the range
r/mossberg • u/Electrical_Bill_7042 • 3d ago
Good news brewing for OH
We're getting closer to owning sbs(short barreled shotguns) without all the hassle, and having loaded shotguns in our vehicles 😁... Ohio won't allow you to have loaded shotguns in your vehicle at all. Ammo has to be separate, shotgun and ammo must be stored in the vehicle. Or in plainsight with the action open or taken apart. It's an outdated law. This will go for rifles as well.
r/mossberg • u/Important_Stress_139 • 4d ago
590a1 spare parts?
what parts should i stock up on so i don't need to go shopping for parts if something breaks? what are the breakable parts in one of these? what's most likely to break?
r/mossberg • u/the_kyle_kapp • 3d ago
FAB FXPRMO RAIL?
Anyone run this on their Shockwave?
Dusting off this impulse buy from a few years ago and want to upgrade the foreend for a touch more comfort and to run a streamlight.
r/mossberg • u/MandM1619 • 4d ago
183D .410 Striker Question
Hello, my question is descibed in the video, but ultimately I don't remember the striker being free-flowing and am wondering if this is normal. It is just a straight original 183D, no extra model variation. Thank you.
r/mossberg • u/roxmuffin • 4d ago
Shockwave 590 & Streamlight Forend
I installed the TL-racker shotgun forend light on my Mossberg Shockwave 590 and noticed some lateral movement on the action bars. Curious if this is normal as I cannot recall if this was present with the original forend.
Any help is greatly appreciated!
r/mossberg • u/aloofmulk • 5d ago
Looking for recs
I have a Mossberg 500 field/deer combo with the integrated cantilever base on the slug barrel.
Having a hard time finding a solution to mounting a Sig Romeo 5 to this, as it's a weaver style base, with uneven spacing.
Curious if anyone has done this before? Or if anyone has any recommendations of a simillar optic on the slug barrel with the cantilever rail.
TIA
r/mossberg • u/wettones • 5d ago
Sidesaddle recs for 590
Hey everyone!
I am looking to upgrade my sidesaddle setup. I currently use Esstac shotgun cards, however I’ve had to replace the Velcro on the receiver 3 times now and it just keeps peeling off and feels unreliable.
Because of this I am thinking of changing to a standard sidesaddle not cards. I am considering TacStar slimline sidesaddle, or mesa tactical SureShell Side Mount Carrier.
Please let me know what you would recommend I really wanna get it right this time!
r/mossberg • u/FafnirRannsTwinedAxe • 6d ago
Before and after
- mossberg 590a1 18.5" barrel, bead sights
- strike industries voa forend
- ferro concepts single point slingster + steel sling hook
- surefire m340c mini scout pro
- S&J hardware side saddle
- magpul stock + sling hook adapter
- vortex viper micro reflex sight
- cerakote
r/mossberg • u/scavingerdecor • 6d ago
Does the longer barrel fit on this version?
I've never owned a shotgun, and am not looking for anything fancy. I saw they have a version that comes with both barrels, but where I want to store, it the folding stock fits better.
r/mossberg • u/Qball0077 • 5d ago
MOSSBERG 590 flextac
Hey! Need some suggestions. Want to add something to a 590 that makes it easier to pump. Angled for grip? Vertical for grip ? Also suggestion on sites maybe with a laser. Any suggestions is greatly appreciated.
r/mossberg • u/tlap5 • 7d ago
Maverick build
I got this gun about 12 years ago with intentions to trade up to something more expensive later, but I love it so much I’ve never wanted to replace it. This thing is a friggin tank, so I decided to throw some basic upgrades on it.
r/mossberg • u/UnitedPow • 7d ago
Most fun gun for under $300
First post here! I grabbed a Maverick 12g security for $220 new and some dragons breath rounds! Made for a good time and not a lot of money!
Fed it over 300 rounds without a single miss feed or ejection issue. This thing kicks ass!
r/mossberg • u/Careless-History-559 • 7d ago
New Breacher Barrel Shotty
Got this one put together yesterday, loving how it feels so far
r/mossberg • u/Wonca_Mpls • 9d ago
Picked up a Maverick 88 with folding stock (looking to upgrade stock)
Just like the title says.. I'm looking at upgrading the pistol grip/folding stock. It'll be for home defense. Thanks!
r/mossberg • u/Heavenly_Malice • 12d ago
Questions about the 500 (and modifying it)
So I just acquired a used but more or less brand new and never fired Mossberg 500 Combo Field/Deer. It came with the 24” rifled barrel but no scope, and a sling, nothing else. So not really the combo but oh well lol.
Now I plan on making this into a home defense shotgun more or less which is where I have a few questions. Comparing it to the 590’s, the receiver is pretty much exactly the same right? Like the real differences between a 500 and a 590 are tube capacity and a heavier barrel if you get the A1 correct? Or is there more to it than that?
As for barrel swapping, the 500 is pretty easy to just drop in an 18.5”, toss on a heat shield and call it a day, but I want more tube capacity. Is it possible to take a 590A1 20” barrel and the 8 capacity tube and affix it to the 500 and effectively making my own 590? Also, would I be able to put the 590’s ghost ring sights on there as well or should I just get a plate/rail attachment and toss on a red dot?
Last mod would be replacing the stock with a pistol grip tactical one and swapping to a more textured grip.
It was from a family friend so I paid very little for it, which is why I’m considering dropping the money into it to make it how I want it to be. But if the cost is still more than what it’s worth, I suppose I could just go buy a 590A1 and be done but modifying and making something my own is also a fun thing.
r/mossberg • u/Mediocre-Abroad-8547 • 12d ago
question
Where can I buy a standalone rifled barrel for my maverick 88 in canada? the mossberg website says it doesn't ship outside of the states and all the retailers around me only sell the whole firearm instead of just a barrel
r/mossberg • u/kommandr84 • 13d ago
Jumping on the Shockwave Bandwagon.
I picked this 14 inch Shockwave up last week, put a high viz sight and magpul stock on it and had allot of fun with jt at the range over the weekend. I have a Magpul forend arriving tomorrow that I'll modify to fit the short action tube and mount a spare TLR-1 I have to. I am going to add an optic and right now the plan is to add a Monstrum Grimlock rail with a low mounted Holosun optic but I know that pistol dots have become popular as well so I am open to other options there. I am also not sure about elastic shot cards versus plastic/aluminum side saddle shell holders. Thanks.
r/mossberg • u/Carnacan • 12d ago
Shockwave Inspiration
Hey all. New here.
Setting out to build a shockwave as a tactical shotgun. Wanting to see some builds to get an idea which way I want to go with it
r/mossberg • u/FTFxHailstorm • 12d ago
Is the 590S the only way to get a 500/590 with a 20" barrel and choke option?
I've been looking to grab a 500 or 590 and want a 20" barrel for the capacity and the option to add a choke. From what I've seen the 590S is the only way to get that combination. I'm not against that model, but am curious if there are any other models that offer what I'm looking for.
r/mossberg • u/Careless-History-559 • 15d ago
Finally Found and Ordered my Ideal Shotgun!
This is going to be my one to rule them all! I have always wanted a breacher barrel, and found this guy for a sweet deal! It's going to be getting Magpul furniture, sling, AFG, and a Streamlight Protac light. I will also be getting a 20 inch field barrel and a slug barrel so that when I travel home to my family, I can use one gun for the range, clays, hunting, etc. As much as I like the 590 and 590A1, I wanted one true "do all" setup that only the 500's barrels can accomplish. Anyone have one of these?