r/moped • • Jun 05 '14

Got yourself a new moped? Don't forget to fill out the flair form!

120 Upvotes

Hey all,

As summer begins, I've noticed lots of people getting new mopeds! Hell yeah!

Whether you're brand-new or you've been on here for years, don't forget to fill out the flair form so you can have your model of moped appear next to your username on this sub.

Once and a while I've gotten a bit behind on updating everything but I'll try to be better from now on.


r/moped • • 59m ago

Does this blue wire connect to the points?

Post image
3 Upvotes

So I have this 1978 Columbia Commuter with a Sachs 505 motor, and when I got it the flywheel and stuff came dismantled. I screwed the points in but there is this blue wire. Do I connect this to the points or where? Thanks!


r/moped • • 2h ago

Update on the 1964 rap imperial

Thumbnail
gallery
4 Upvotes

Rear wheel got new spokes. Still looking for for brake shoes. The frame of the buddyseat is powder coated, and i did my first try to upholster it. Upholstery turned out to be pretty hard, but I got enough practice material.


r/moped • • 19h ago

Rippy dippy

34 Upvotes

r/moped • • 18m ago

Rieju mrt 50 euro 5+ issues with installing voca 50/70

Post image
1 Upvotes

So basically i cant take the thing between stock exhaust and cylinder i dont know what it is called and cant seem to take it off no matter how har i twist turn and pull on it. Ill put a pitctute of the part im talking about (yes i know its very dirty down there and about everywhere else too)


r/moped • • 21h ago

1978 Peugeot 103 resto tips

Thumbnail
gallery
21 Upvotes

So I've picked up this beauty in hopes of bringing it back to life. I don't know how long it's been sitting around but it's been sitting in a garage or barn for a very long time after someone was doing some work to it. Lots of rust. Spark plug is missing so i need to tear down the motor.

Besides gaskets and seals, is it feasible to think using rust remover, cleaners and elbow grease will get this thing running again? What will likely need to get replaced? Any tips hints or specialty tools would be appreciated.


r/moped • • 20h ago

I restored my FA50

Thumbnail
gallery
7 Upvotes

r/moped • • 23h ago

30km ride in the morning. 1954 NV5 Autoped

8 Upvotes

r/moped • • 1d ago

[OC] Rare late-1950s 50cc duo from former Yugoslavia: TMZ 50 SL moped & TMZ Švrčo scooter (built under Austrian HMW license)

Post image
16 Upvotes

machines in small numbers before closing in the early 1960s.


r/moped • • 1d ago

Lean/rich/good?

11 Upvotes

Thanks for the help guys!


r/moped • • 1d ago

Does anyone know anything about the suzuki street magic?

3 Upvotes

Ive been looking at one for its weird look and such but like does anyone know if its reliable? Cuz if i search online its mostly a bunch of nostalgia blinded old men saying that everything is reliable


r/moped • • 1d ago

Babetta

Post image
8 Upvotes

r/moped • • 1d ago

What sort of things do I need to consider before purchasing my first moped (UK)? Would like a decent amount of carry-space like they use for pizza deliveries (though that's not what I will be carrying)

0 Upvotes

Apologies, I'm sure this is a common question. Please feel free to direct me to a link.


r/moped • • 3d ago

Piaggio help please

2 Upvotes

Recently I was riding when suddenly my bike started bogging when getting just over Half throttle then when I got home I realised my air filter was missing and it only happened halfway through the ride so I suspect it was bogging due to that but then today I realised there was a slight exhaust leak so I took off my exhaust and put some high heat gasket sealant around the gasket and re fitted it but now when I try to start it it’s hard to start cranking over on the e start but when it does start with the throttle almost pinned it won’t idle and dies if I’m not holding the throttle open but while in holding the throttle open the bike doesn’t rev up at all really just barley idles and the back wheel doesn’t move. Please help. My bike is a piaggio typhoon 70cc 2 stroke 2017 with a Malossi bore kit and exhaust on it


r/moped • • 3d ago

Which way around is my crankshaftvsupposed to be?

Thumbnail
gallery
13 Upvotes

I have Garelli Junior (343derky engine) the crankshaftvssems to be symmetrical but ha a R marking in IT. Hod oder Input ist in?


r/moped • • 4d ago

Street spot: Velo Solex

Thumbnail
gallery
140 Upvotes

Saw this thing today. Early model Solex, probably from before 1955 as far as I can make out.

Deleted rear drivetrain, incl. pedals. Non factory rear brake hub. Foot pegs welded on.

The motor looked modified, with some sort of vertical trumpet type carb and a non-standard exhaust.


r/moped • • 4d ago

Má někdo ověřený účet na Bazoš? Potřeboval bych e-mail jednoho prodávajícího

1 Upvotes

Ahoj,

nemám české ani slovenské číslo, tak se na Bazoš nemůžu ověřit.

Může mi prosím někdo s ověřeným účtem dát e-mail jednoho prodávajícího? Detaily pošlu do zpráv.

Díky!


r/moped • • 5d ago

Broken spring in Dellorto t4 carburetor

Thumbnail
gallery
4 Upvotes

I disassembled my carburetor, only to find a broken spring.

I might not be the best at explaining it, but it's part number 29 on the diagram.

I think the spring should be about 1,8cm long, 0,7cm in diameter, and 0,8mm in thread thickness.

I just need help from someone with the same carburetor to verify the dimensions, what the part is called, or if anyone knows where I could buy one as a person living in Denmark.


r/moped • • 4d ago

PROBLEMS

0 Upvotes

Hi,
so i have a Beta RR 50 2 stroke model year 2025, i putted in the Top performance 73.5cc, a phbg 19 dell’orto carburator and a scalvini exhaust. Since yesterday when i go full throttle it vibrates much more than usual and makes a strange sound, not metallic, but as if it is alredy at the limiter, but th RPMs still goes up. I thought it may be the carburization since last time i carburated it was July and now its Noveber and the temperature went down of 20 degrees. What could the problem be?


r/moped • • 6d ago

Love this bike piazza hawk 4 gt my favorite moped I own

Post image
35 Upvotes

r/moped • • 6d ago

Just fucing around had a yz80 pipe figured why not time to go see if it rip or not now

25 Upvotes

r/moped • • 7d ago

Got this fine thing to 38 with just taking the baffle out of the pipe it’s completely empty inside now I’m pretty surprised gonna port the shit out of another cylinder I have I guess it’s the fast stock cylinder says cs34 what that means was told it’s a rare stock cylinder don’t know much about moby

Thumbnail
gallery
5 Upvotes

r/moped • • 7d ago

Puch maxi Grimeca snowflake

5 Upvotes

Im trying to install solid Axle with Ball bearing. But cant really find any that fit. I have a pedal bike with pedal brake. Which means the Hole is bigger. Measured around 41mm on the rear of the original Ball cup.
Wanted to know what other people have done


r/moped • • 7d ago

Do I need a ney cylinder or not?

Post image
21 Upvotes

The compression reads at 75psi and there is a vertical scratch the i can feel with my finger, but it goes 35kph, it pull alright, and it idles fine.

but the torque has gotten a worse over time and it drinks a ton of fuel.


r/moped • • 9d ago

1977 Italvelo

Thumbnail
gallery
23 Upvotes

Picked up this 1977 italvelo yesterday. My first moped in a long time. It doesn’t run currently. It has a key hole on the steering neck which the previous owner said is an ignition but google tells me is a steering lock. It didn’t come with a key. Does anyone know? It’s not getting spark when I pedal it right now nor does the flywheel spin when I pedal. It needs a new starter level cable and a couple of odds and ends but is in great shape. Looking for advice for upgrades and what not.