r/modelmakers • • 1d ago

The Weekly Small Questions Thread! Got a burning question? Looking for some tips on your build? Ask away!

0 Upvotes

The Weekly Small Questions thread is a place for everyone in /r/modelmakers to come and ask questions. Don't be shy.

You might have a burning question you've been meaning to ask but you don't want to make your own thread, or are just seeking some input or feedback from your fellow builders! This thread is aimed at new builders, but everyone is welcome.

If you haven't, check out our local wiki and the "New to the hobby" thread, which might be of help to you!


r/modelmakers • • 11h ago Bravo

Completed 1/48 Dick Best’s SBD Dauntless Battle of Midway

Thumbnail
gallery
832 Upvotes

Shoutout to the builder u/madeitup75 who inspired this. It was a challenge for sure. Had issues with clear coats and fitting the aftermarket dive flaps. But pretty happy with how it turned out.


r/modelmakers • • 2h ago

META / Show Galleries IPMS Fremont Show Pt. 3

Thumbnail
gallery
108 Upvotes

r/modelmakers • • 9h ago

Completed 1/20 Renault FT complete! Designed in Solid Edge and 3D printed on my BambuLab A1 Min

Thumbnail
gallery
225 Upvotes

TLDR

I think I've finally finished this project. The FT-17 printed out of PLA, brass and toothpicks. It has fully moveable tracks and suspension true to the real thing.

This has been a really fun and challenging project where I've been learning how to use CAD, 3D print and trying out some different painting and finishing techniques. This has been in the works for quite a few years now, but time constraints have meant it's been very off and on. 

Reason for the project

I really like the Renault FT and have wanted to build one for a long time. A few years ago I started making a British Mark I out of wood and metal in 1/20, so I wanted the scale of this to be the same, plus it's been an opportunity to do something new that I've not done before.

Design Process

This has been a trial and error process learning to use Solid Edge, which essentially amounts to me sketching (over blurry blueprints), extruding and assembling. Luckily the tank is mostly flat surfaces, but I found the engine deck and area around the drivers position the most difficult due to the weird angles. I originally wanted to have a round cast turret but it was beyond my ability in CAD so I switched to the flat hexagonal turret which was more forgiving.

While not trying to be 100% accurate, I did want the overall model to represent the real tank to a good degree. I have tried to keep details (rivets especially) in broadly the correct places. 

The use of reference photos was hugely important to understand how the tank actually fit together. I was lucky enough to visit the Tank Museum at Bovington and took dozens of photos, however, that is an early prototype and quite different to the production models, however, getting a close-up look at the suspension was extremely helpful.

One of the biggest challenges has been minimum wall thickness with what my 3D printer can actually print vs the scale of the model. This means I have had to beef up wall thickness in many areas and compensate somewhere else to keep proportions correct. The suspension and running gear has been the biggest victim of this, the road wheels have been compressed quite a lot to allow enough structural integrity for the surrounding parts. But this means the model has fully functional tracks and suspension, using leaf springs and bogeys, accurate to the real tank.

I am probably most pleased with how the track links have turned out. These were each printed in a single piece, but they went through many different iterations to get them to work and fit together properly without breaking.

Materials and Printing Process

This is printed out of PLA plastic using a 0.2mm nozzle. To get better detail I have printed most surfaces as flat as possible. Each outer piece of armour plate is a 0.5mm skin that is glued to an inner shell. I don't know how many individual pieces I have printed but it must be a couple of hundred at least. 

Other than PLA, I used brass extensively for all moving parts, as rods and bushings, with a mixture of 2-3mm tubes. The tracks use 1mm brass pins. The hinges on the hull proved to be tricky, and originally they were all designed with 1mm pins, but these proved to be too big, meaning the printed hinges were very fragile. Switching to 0.5mm brass rod for most hinges to help with this issue.

The chain is also made out of 1.2mm brass

Toothpicks were used for all the tool handles (sledge, pickaxe and shovel), which I think worked quite nicely. although each tool head is 3D printed still.

Stainless Steel coil springs are used for the track tensioning and also for the suspension that buffers the connection between the running gear and the hull. Unfortunately these are maybe a bit too strong for the model, and I wish the track tensioner springs were slightly more compressed to allow the return roller arms to sit slightly lower in the cradle.

Paint Scheme

I wanted this to represent a French FT in WWI, and I found it difficult to find a consensus on how these would actually look. I went for a 3 colour scheme based on some box art, but apparently this kind of scheme might have been postwar. 

Choosing of the rondel and ace of spades was just a creative choice, along with the tank's number, although 67091 would indicate a Renault-built tank (as these were also built by other companies with different number ranges). These were painted on using stencils I designed and printed. However, I am missing the Renault brass manufacturing plate, I have designed one but it is too small to print out with any detail on my printer :(

Painting has been one of the biggest challenges, not having really painted model tanks since I was a teenager. I bought a secondhand airbrush and used cans of compressed air which I found quite difficult to get to work consistently. Otherwise I tried to employ different techniques from watching Nightshift videos, including washes and chipping, although I decided not to go with any mud or dust.


r/modelmakers • • 8h ago

Completed GWH 1/144 Avro Vulcan

Thumbnail
gallery
149 Upvotes

Pretty basic OOB build, kit went together like a dream. Will fix some of the accuracy issues next time I build one of these kits


r/modelmakers • • 1h ago

Completed border model Apocalypse Tank

Thumbnail
gallery
38 Upvotes

r/modelmakers • • 4h ago

WIP Working on a cardboard Panther model.

Thumbnail
gallery
56 Upvotes

r/modelmakers • • 3h ago

Completed MiG 29 SM+ pt.2

Thumbnail
gallery
40 Upvotes

r/modelmakers • • 2h ago

META / Show Galleries IPMS Fremont Show Pt. 1

Thumbnail
gallery
31 Upvotes

r/modelmakers • • 13h ago

WIP How It started in 2021, How It's going in 2026 - Hasegawa/Italeri Typhoon mkIb 1/48

Thumbnail
gallery
138 Upvotes

Back during the COVID in my 20s I approached this world, having always been a ww2 aviation fan and fascinated by model making. For my first kit I went for the newly released Airfix 1/72 Typhoon, all painted with tamiya spray cans with a tedious and infinite masking. Now after 5 years I'm still a noob but wanted to give anorher try to one of my favourite airplanes ever, with the few skill I learned along the years. Still missing her base ( with pilots, mechanics and marston matt) and a few final touches with some pencils, but she Is finished and I'm quite happy with her🛩️


r/modelmakers • • 10h ago

Completed USS Enterprise and USS Fletcher

Thumbnail
gallery
78 Upvotes

Diorama created as a gift for my senior modern history teacher (ran out of time to take proper photos)


r/modelmakers • • 9h ago

Tips & tricks Reject Decals. Embrace hand painting

Thumbnail
gallery
57 Upvotes

Over the years I have grown tired of not being able to recreate the liveries I want to make because I dont have the decals for them, so recently, I have been experimenting with hand painting with my paint brush all the details I could have only gotten from decals. It tried masks but quickly realised doing it freehand and correcting the mistakes I made after. It was very difficult at first but after doing it enough times, I thing I've gotten it down to a fine art.


r/modelmakers • • 5h ago

Completed Touched up on a old Panzer II (1/48) diorama, hopefully my future ones will improve…

Thumbnail
gallery
25 Upvotes

r/modelmakers • • 1h ago

Completed Bronco J-20 Mighty dragon 1/72

Thumbnail
gallery
12 Upvotes

Just few days ago i finished this kit,not too bad but has some issues.Hope you guys like it.


r/modelmakers • • 3h ago

WIP Temu 1886 Benz Motorwagon

Post image
17 Upvotes

The start of my 51+ piece $3 USD, Temu kit. The listing called this an "alloy" kit. Chuckle. The only metal part is the main frame. Typical Temu. But hey, for three bucks...


r/modelmakers • • 14h ago

Completed Toyota IMV Origin (Bandai snap kit) turned into a Cameroonian bush taxi

Thumbnail
gallery
108 Upvotes

Body:
It is a limited Bandai's snap-together kit of the Toyota IMV Origin. The bare-bones concept along with the model kit showed at the 2025 Japan Mobility Show, on the Toyota booth. The real vehicle is designed for rural Africa: the concept is to get it shipped mostly built but to be finished locally, so owners can adapt it to whatever they need. That idea was too good to leave in grey plastic.

I spent 10 years in Cameroon, so I imagined what one would look like after a few years working the red dirt roads as a yellow taxi.

Kitbash parts, all from my spares box:
Wheels from my very first build, an FJ43
Tires and steering wheel from a Shelby GT350 kit
Headlights from an Aoshima Hilux (the one of the group build at the beginning of the year).
Windshield made from the engine cover glass of a Lamborghini Gallardo kit
Wiper from a 1/35 Meng Hilux
Spare wheel from another FJ43 kit

The IMV Origin concept is all about being finished by its owner, so I took that literally 😄
Thanks for looking ! 😎


r/modelmakers • • 2h ago

META / Show Galleries IPMS Fremont Show Pt. 2

Thumbnail
gallery
13 Upvotes

r/modelmakers • • 11h ago

Critique Wanted Revell 1:1200 Gneisenau

Thumbnail
gallery
52 Upvotes

Forgive me for the meh picture, I only have my phone.
I still have some weathering to do with a wash.
Brush painted with Vallejo paints.
I didn’t have any bright red for the turrets so i used the hull red.


r/modelmakers • • 19h ago

Help - General Spiky treads

Thumbnail
gallery
197 Upvotes

Are these kinds of spiky tank treads a real thing? If so, what are they called? I'm having trouble looking them up aside from this example from Metal Slug.


r/modelmakers • • 17h ago

Completed (My first completed kit) Tamiya 1:35 Pz IV D. I really recommend this kit to other beginners

Thumbnail
gallery
115 Upvotes

I only had two colours so I know it's not the best in weathering but I think it's quite good for a first ever kit that I completed

And I learned a lot from this experience so my next project will be more successful (the project is a DAK Pz III L btw)

It was my first time using Tamiya XF colours. I used XF 63 and XF 57.

Apart from that the kit is insanely good and enjoyable to build because it's almost impossible to misplace the pieces.

But there are incredibly small pieces that can be annoying.


r/modelmakers • • 7h ago

WIP My first ever chipping!

Thumbnail
gallery
16 Upvotes

Hi all,

here's some pics of my first ever chipping. The model is a Tamiya 1/35 scale Finnish army Stug 3 and it doesn't really have an interior except a few bits of structure and some gun breach details. Because of this I've decided to use it as a practice area and so I've recreated a standard German tank interior.

I plan on doing rust washes and grime right after hitting post!

Happy hobbying :)


r/modelmakers • • 11h ago

Completed IMV Origin

Thumbnail
gallery
22 Upvotes

While cleaning my work space I realized I actually recreated the box art without even noticing 😅


r/modelmakers • • 1d ago

Completed Meng 1:48 EA-18G Growler VAQ-140

Thumbnail
gallery
227 Upvotes

Finally wrapped up on another growler. This one an in flight landing display. Extended gear from Flight Line Resin with scratch built APU intakes and arresting hook. Really happy with how the paint and weathering came out overall on this one. First time really messing around with using liquid mask for sections of touch up paint. Bonus picture of the hornet shelf at the end. Need to get a better photo setup so my messy bench isn’t as visible.


r/modelmakers • • 11h ago

WIP GRU-7A (Revell Maverick's F-14A Tomcat)

Thumbnail
gallery
12 Upvotes

r/modelmakers • • 3m ago

Completed 1/48 Tiger 712

Thumbnail
gallery
2 Upvotes

From earlier this year, Tiger 712 captured in Tunisia and sent to Aberdeen proving ground. based on photos of it being unloaded from the ship in New York. Tamiya kit, modified top for empty stowage clips and rear for removed engine intake & exhaust parts. the turret went on the VK4501p posted a few days ago

https://www.reddit.com/r/TankPorn/comments/qb203a/tiger_i_712_unloaded_in_a_port_in_new_york_city/