r/mitcad • • 21d ago

The new version - 0.39.0 - has added the ability to pin commands

0 Upvotes

If you use certain tools a lot, like rectangular array, for instance, then you can pin them to the taskbar like in Fusion.

Right now they are going into a separate 'pinned' area rather than in their home area... which I'm not sure if I like or not... but they are there, and that is nice. The same little three-dot-menu for each tool also allows you to change or assign a new keyboard shortcut. Nice.


r/mitcad • • 22d ago

I did a bit of evangelizing on r/FreeCAD. Screen shots of imports.

0 Upvotes

I posted these three shots on r/FreeCAD.

Yeah, the SolidCraft import was pretty gross. Could you redo the extrusions to sort it out? Yes, you could, but with MitCad you don't have to.

I have plans for more of the same.


r/mitcad • • 22d ago

0.37.0 has been released. Release notes below.

0 Upvotes
  • AI chat panel: talk to your own Claude Code or Codex inside Mitcad; it edits the open design through the live MCP connection. Connect AI Assistant also finds Claude Code and Codex installed outside PATH on Windows.

  • Navigation: 3D mouse (6-DOF) support on Windows, Linux and macOS.

  • Drawings: adding a projected view of a part with threads or other freeform faces takes well under a second instead of half a minute.

  • Fasteners library: one component per kind, with each size's standards (ISO, DIN or non-standard) and supplier part numbers, and Standard and Supplier filters.

  • Sketches: drawing tools snap onto the x and y axes.

  • Timeline: a failed or warned feature keeps its red or amber mark when selected; a selected Fillet or Chamfer shows its picked edges.

  • Components: picking a face of another component for a sketch or a construction plane asks whether to activate that component (can be turned off in Preferences).

  • Extrude in a rotated component: the arrow follows the sketch, and a Join onto a child component's body works.

  • FreeCAD import: SubShapeBinders, linked external geometry, distances between circles and arcs, symmetric up-to-face pockets and long revolutions come in as parametric features (far fewer stand-ins).

  • Annotations: a technical lettering font and crisper lines.

  • Views: a restored view in a tall window keeps its zoom.

  • Linux AppImage: the update check works on systems such as Fedora.

  • Files: safer reading of damaged or oversized .f3d, .rvt, .ifc, .dwg, .FCStd and 3MF files; listings before an import no longer freeze the window.

  • Security: the MCP endpoint and the updater are hardened; a push to a folder remote no longer runs that repository's hooks.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc1 (9fbed58446b9)

  • Linux: rc1 (9fbed58446b9)


r/mitcad • • 8d ago

Did a bit more evangelizing on r/Fusion360

5 Upvotes

We'll see how much backlash I get.

I only put a link to this subreddit, not the homepage, so maybe that will keep it from being stepped on.


r/mitcad • • 3d ago

Can't use my 3D mouse on MacOS version

1 Upvotes

I have a Space Mouse from 3dconnexion and it doesn't work on MitCAD for MacOS. Yes I have checked the preference in navigation to use it, already did this multiple times without success.

Anybody else having this issue? Is the only thing preventing me from giving it a full go. I haven't even started using it because of it.


r/mitcad • • 26d ago

0.29 has annotations! A good start on it, anyway.

1 Upvotes

It's early days, but we have this already:

Nice!


r/mitcad • • 1h ago

Info r/MitCad is doing pretty well.

2 Upvotes

This is the top of our current info screen:

Over 21,000 views. Not bad. 408 members? Nice.


r/mitcad • • 10h ago

What are you using MitCad or Cad software in general for?

2 Upvotes

I use Cad for 3D printing projects.


r/mitcad • • 24d ago

Post your favourite feature! Mine is copy and paste...

2 Upvotes

Start a sketch. Make a few shapes. Select them. Hit CTRL-C to copy, and you can 'stamp' them as many times as you like with CTRL-V. Oh.... MAN that's nice. I'm as giddy as a school girl over here. FreeCAD can't do that. Fusion sort of can... if you use CTRL-C / CTRL-V then it pops up the move window and you have to go through that.


r/mitcad • • 8d ago

Opinions - is it time to focus on bug-hunting to solidify what we have, or keep spreading out?

3 Upvotes

I've been wondering to myself if there is *enough* in MitCad that if it all worked great (no bugs) then it would be a real contender in the market.

I think it is there.

MitCad is already usable - I use it pretty much every day as part of my job, but there are still opportunities to tie up loose ends in what is already in the program. Bugs are found and dealt with QUICKLY - which is wonderful - but I am pretty confident that there are still more to find. I find a lot because I am using the system pretty hard with big assemblies. It's usable. I use it.

We have modelling, assembly, and drafting. That alone makes it viable for the professional.

We have some very valuable 'add on' features like components from the web. That's gold. Not mandatory, of course, but so... so awesome.

We have the 3D printing integration that makes it nicer for the hobbyist as well as professional designers who prototype with 3D printing.

Sure, there are other things that could be added, like CAM and maybe even FEA (simulation), but it already has a HECK of a lot more than TinkerCAD or a bunch of other viable systems, so I wonder if maybe it's time to slow the additions and focus on making what is already there a solid, happy user experience.

Obviously it's not really up to us, but I am curious about opinions.

What say you folks?


r/mitcad • • 13d ago

0.53.0 has been released. My thoughts and the official release notes are below.

3 Upvotes

Interface scaling! No more tiny icons. :)

An improvement to the docked layout. The floating layout looks nice, but I prefer not having the cards float over the model. I am happy about this improvement.

Official Release Notes:

  • Interface languages: choose the language in Preferences; MitCad now comes in Finnish as well as English, and more languages can be added as data. (#135)

  • Interface Size scales the whole interface from 100 % to 200 %, and new windows fit the screen. (#194)

  • View › Anaglyph 3D shows the model in red/cyan stereo for 3D glasses, with stereo depth and convergence in Preferences › Display. (#189)

  • Sheet metal: a mirror or pattern of a sheet body stays sheet metal, and a mirror with Join merges both halves into one sheet; copies of patterns and of sheets with roundings stay sheets too. (#188)

  • Pipe: the joints at the path's corners can be Mitred or Rounded, and Pipe warns about bends tighter than its profile. (#190)

  • Intersection Curve shows a preview of the curve while its panel is open. (#193)

  • Value fields read inch and foot marks (.875", 3' 6"), and values typed in an inch design stay inches everywhere. (#187)

  • Typing a sketch dimension's or a feature value's own parameter into its expression (Diameter * 2) moves that parameter to User Parameters and gives the dimension or field a new one, in one undo step.

  • Fillets: an edge the preview has trimmed can be picked without Ctrl, and a refused pick says why (#177); more roundings build, such as all edges of a thin pitched slab; a failure names the face the roundings reach across.

  • A sphere scaled along its axis becomes an exact flattened ellipsoid, so strongly flattened spheres and joins of many of them build.

  • Tapered extrudes of long bands of lines build; Intersect gives the target when it lies wholly inside the tool.

  • Print plates: pieces are set apart by their brims as well as the spacing, so slicer brims no longer collide.

  • AI assistants (MCP): the server's instructions reach every client whole; long-running commands stop with a clear error before memory runs out instead of ending the server; model_export writes print plates and slicer 3MF files; the headless server renders images, fast or ray traced; the reference shows only what an assistant can use.

  • Windows: the command search opens reliably; the Docked layout keeps its ribbon (#185).

  • macOS: Settings shows that a change was saved.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc1 (15301d1647b5)

  • Linux: rc2 (a38cb9b7f116)


r/mitcad • • 25d ago

Where are links?

3 Upvotes

Just found this subreddit.

But there aren't any links to the product.

Is there a site? Or a download link somewhere?


r/mitcad • • 8d ago

0.61.0 has been released. My thoughts and the official release notes are below.

4 Upvotes

The sketch timeline has been refined, and I'm looking forward to using it.

Improvements to the assembly joints. Better is better. :)

The print shape in the hole tool has been modified to make it more user-friendly. It's a 3D printing thing, but several folks in the subreddit have mentioned it so I thought I would pass on that it has been improved.

More improvements to linked components. This is a bit of an esoteric one - if a linked component is not in the directory tree of the drawing (either that directory or a sub-directory) or in the same project then the link couldn't be followed, but that wasn't made clear. Now it warns that there could be problems if you make the link and it offers to sort it out. This is helpful for people who maintain a library of standard parts that they use.

A good, solid release.

  • mport: .3dm models open and import, with their blocks, spheres and open surfaces; the import's warnings say what was left out in words. (#284)

  • Sketch: while a sketch is edited, the timeline's place shows one icon per work step (a projection, a rectangle, a fillet, a trim) instead of one cell per point and curve; a count shows how many items a step made, hovering it lists them and highlights each in the view, and a click selects them all.

  • View: origin planes can keep a constant size on the screen, in the origin's corner or centered, and construction planes and axes have handles to set their display size. (#273, #279)

  • View: the perspective camera and Anaglyph 3D have an adjustable focal length. (#282)

  • Image Reference: handles move, turn and scale the image in the view, and the image stays drawn while its panel is open. (#281)

  • Joints: a new joint brings its two origins together at its offset, a drag is kept, and a side that cannot move says what holds it and shows it. (#296)

  • Extrude: a taper works on profiles of splines, ellipses and offset curves. (#307)

  • Hole: Print Shape is offered on every hole, with or without a print bed face; a hole placed by a pick moves its references and handles to the new place and face. (#301, #302, #303)

  • Profiles: a hole drawn across a plate's outline no longer brings the piece inside it into the selected region.

  • Texts in words: the command panel, the selection card, Version History, the import report and other messages name picked items in words, never by internal keys. (#308)

  • Timeline: renaming the last item gives a text box as wide as the name. (#304)

  • Linked components: MitCad says when a link from outside the project will not be followed and offers to copy the file into the project; Save Component as Design warns the same way before it links. (#251)

  • Insert SVG: drawings with a DOCTYPE declaration are read; nothing outside the file is fetched. (#295)

  • Component from Web: on Linux the page no longer flickers while the window is resized, and a download that fails says why. (#269)

  • Configurations: the Rows sheet shows long parameter names in full and keeps its columns while scrolling sideways. (#287)

  • 3D mouse: rotations turn the model the way the cap turns. (#297)

  • Value fields: an unknown name offers Add User Parameter first, and the fields of the drawing tools and sketch dimensions grow with the expression typed into them.

  • 3D printing: Send to Slicer remembers Folder only; a print 3MF of a body without a material prints as PLA and says when no printer profile was imported; same-name filaments are numbered from (2).

  • Pipe and Sweep: tight bends on ellipses, splines and helixes that pass through themselves build as one solid on Linux and Windows too.

  • Preferences: every page fits a 1366 x 768 screen again.

  • Finnish: the view styles with hidden edges say the hidden edges are shown.

  • For AI agents (MCP): ui_click, ui_type and ui_dialog for screenshots of the running app, a parameter_range query that evaluates a design at a parameter's limits, design_review rules for stray bodies, missing print beds and profiles, warnings a command brought to earlier features in every result, ui_screenshot with popups and dialogs, and a print-export recipe in the guide.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (6a7d6ad8b2e3), web browser component 2026.1113.739

  • Linux: rc1 (575f52faa800), web browser component 2026.1113.621


r/mitcad • • 12h ago

My thoughts on 0.69.0

7 Upvotes

Wow! Big stuff. Okay, tutorials? I need to check this out. Oh, it has to download a new browser. That seems fair. The download is hideously slow. Whatever server is feeding this must be under seige. Maybe I'll get back to this one later. I need the new browser, anyway, for components from web, so download it I must.

Comments? Hmmm.. Okay, that's cool. You can 'jot notes in the margin' as a reminder later. I like that. Nice.

Sketch blocks? That sounds pretty sexy. Chunks of sketch that get inserted as a linked item that will update like a component does in an assembly. That is VERY cool. You could have a sketch of the hole pattern for a bearing or caster and paste that into your design where needed, and if you end up using a different caster or bearing then you change the block and all of the insertions into your design update automatically. Yes. This is good.

Lots of curve updates for the sketcher. I was just looking at some bizarre sketch curves this morning so I think this is a good addition.

Make a driven dimension. At first blush this seems pointless, but I get it. Sometimes you want a measurement that you can keep track of to make sure that the rest of the sketch isn't causing you problems. Yeah, I like this.

More stuff for drawings. Very good.

More for the sheet metal guys. I'm good with that. There are a surprising number of them. Who knew? :)

Draft angle on rib and web. This is good.

Insert component... link only some components? Ah! Okay, so if you have a previous design that had a really wicked dancer design on it you can import just the necessary components from that design... you don't have to import the whole thing. Fantastic!

Organizational folders! Yes! You can create a folder that sits in whatever component (or the root) that you want, and you can move things to it for organization. This move DOES NOT affect the timeline. This is so good! And they threw in dragging components around so you can have them in the order that you want. I am very happy that this was added.

Some cosmetic changes to the toolbar that I approve of, and some structural changes, as well. Complete toolbar editing. Lots of good stuff there. It's getting a lot more complex, but I'll get used to it.

Plenty of fixes as well.

That stupid Windows graphic driver problem should be dealt with. That is good!

Lots of stuff fixed. It's a very good update.

I like seeing a focus on fixing stuff again. New stuff is nice, but new stuff isn't *as* nice when it is taking away time to fix what we already have and use.

All in all - a banger of an update.


r/mitcad • • 4d ago

0.65.0 has been released. My thoughts and the official release notes below.

8 Upvotes

Some imrovements to the sketcher involving lofting, snapping to existing geometry, text on a path, offsets, and rectangular patterns. The rectangular pattern is a bit ironic because it can now be a non-rectangular pattern, but it's still a very useful addition for some circumstances.

Selected items show through the bodies that hide them. Hmm.. I need to check this out. I like it. It will make finding items in congested assemblies easier. It's a good change.

An option to acknowledge and dismiss warnings. This is good.

A preference for labels under toolbar icons? Just tried it. It's a good change!

Build mode mitering for existing ends (i.e you made it in an off-set fashion and now you want to change it to mitered after the fact) is easier. This is good. It was a bit unpleasant before.

More improvements to fillets. We must really love fillets around here. :)

  • Flex: lay a wire, cable, hose, flat cable or strip through the model by clicks, from a library of types, with its length as a driven parameter and in the parts list; edit an item's nodes in the view.

  • Form: Fill Hole closes an opening left by Delete Faces (one face, or quads), Bridge joins two openings or two edge runs; Patch takes a Form's opening with one pick. (#383)

  • Loft with rails: sections whose edges do not line up at the rails, such as a circle to a rectangle, now loft through the rails; a rail that misses a profile says by how much. (#387)

  • Sketch: every drawing tool snaps to body corners, edge midpoints and edges in the sketch plane. (#392)

  • Sketch: the first dimension that scales a sketch keeps the dimensioned geometry where it was on screen. (#400)

  • Sketch Rectangular Pattern: an optional second direction, for honeycombs and other slanted grids. (#406)

  • Sketch text on a path: Flip Horizontal and Flip Vertical work. (#397)

  • Sketch Offset accepts chains whose short pieces curve tighter than the distance, such as imported DXF outliones. (#382)

  • Sketch Selection Filter: separate rows for Dimensions and Constraints. (#388)

  • Selected items show through the bodies that hide them (View › Selection Through Bodies). (#395)

  • A feature's warning can be acknowledged: no longer yellow nor counted in the warnings badge until it changes. (#380)

  • Preferences: labels under the toolbar icons. (#356)

  • BUILD: mitering two profiles after placing them is clearer: A/B ends, turns named by what the end meets, and Also the Component It Meets offered when the ends touch or nearly touch. (#389)

  • Web: mitered corners where curves meet, Extend Ends to the body, and ribs and webs rebuilt at each pattern copy. (#409)

  • Sheet metal: refusals say in words which wall or which fillet stops unfolding. (#390)

  • Library: cut-to-length parts take a Length and their stock rows set it. (#398)

  • Sketch DXF export writes the sketch's points (hole marks); Export Face as DXF opens a panel when no face is selected. (#408)

  • .f3d import: a Y-up design comes in upright, with its inch units. (#384)

  • .fcstd import: the reported guide opens without warnings or skipped objects. (#405)

  • Linux: a touchpad's two-finger scroll pans under the Trackpad scheme. (#381)

  • Fillets: a smaller rounding now rolls on a larger one where the face between them is narrower than both, and failed roundings report an error instead of a body with a wall missing.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (30973b9dddb3)

  • Linux: rc2 (30973b9dddb3)


r/mitcad • • 5d ago

0.64.0 has been released. My thoughts and the official release notes below.

7 Upvotes

Sketch visibility. This is nice. A sketch that is marked as 'visible' remains visible through bodies that are on top of it, so that you can see profiles to click on, etc. This is a good change.

Drawing change - make it easier to dimension to curved surfaces and make the section label draggable. Nice.

Multi-import of components. I didn't see that coming. Select multiple files to import as components. That will make my life easier. Other improvements in importing components, too. NIce.

Other improvements on importing FreeCAD and Fusion files. Nice.

Extrude changes from join to cut automatically according to the circumstance. That's a good thing. I like it.

They fixed that weird problem where moving one component could cause another one to randomly move. That's a good thing!

The rib tool is fixed! Yay!

We now have the ability to save our preferences and copy them to other machines, so if you use the cloud to store your files then you can keep your preferences there and your installation at home will be the same as your installation at work. I love this.

The 'thinking' situation has been resolved. So they say. My work computer is so fast that I can't get it to 'pause to think' so I can't see what they did, but I don't see the issue that was a problem before, so it looks good to me. I'm happy to have that fixed.

This is a good update. I like it.

  • Flange on several connected edges at once, with mitred corners, a corner gap between neighbouring flanges, a Miter per corner, and a flange meeting an existing one across its bend. (#337)

  • STEP export keeps the design's components: sub-assemblies are written as assemblies, each component once, placed where the design has it.

  • Sketches: every shown sketch is drawn through the bodies outside sketch mode too, so a profile buried in a body can be seen and picked (View › Sketches Through Bodies), with Show All and Hide All Sketches. (#355)

  • Sketch texts and QR codes move and copy with Move/Copy, by a drag, and by a position in Edit Text. (#369)

  • Drawings: dimensions to a curved face's outline and its top, bottom or side point in a projected view; a section's or detail's label can be dragged. (#363)

  • Import of .serp files: the scene's objects as bodies. (#316)

  • Import into the open design: .ipt, .iam, .f3d and .fcstd files as components, several files at once.

  • Import Report: a status mark on every row and a one-line verdict.

  • .f3d import: editing an imported design recomputes, for example a new Extrude height (one of its fillets still fails; follow-up open); an occurrence placed through a part inside it lands where the file has it. (#371)

  • .fcstd import: a sketch on a coordinate system moved by a parameter follows that parameter, so a changed bend radius rebuilds. (#372)

  • .iam import: mirrored or scaled placements come in as copies where the file has them; parts a converted assembly holds without geometry say so in words.

  • Extrude on a sketch on a cylindrical face: the automatic Join and Cut build, and the picked profiles are highlighted on the face. (#362)

  • Patch and Boundary Surface pick the free edges of an open shell as one opening, and Patch can sew the patch onto the body. (#379)

  • Offset Face works on faces made by Split Face. (#376)

  • Fillet and Chamfer: Cancel stops a rounding the geometry kernel cannot finish, and a time limit ends it; a short tangent chain is shown as a notice while the command is open, not as a warning afterwards. (#353)

  • Inserted components (from a library or a file, and with options) keep their source's materials; Edit Options of an inserted component previews and applies changes. (#374, #373)

  • Move/Copy: moving an imported component no longer moves an unrelated one, and a click on an imported assembly's body picks the right occurrence. (#233)

  • Joints: a joint placed by a Build side placement opens for editing; Build profiles snap in line with other profiles of the frame. (#354, #358)

  • Rib Extend Ends meets the boss's top rim cleanly. (#360)

  • Preferences: Restore Defaults for a group or everything, and Export and Import Settings to carry a setup between machines. (#357)

  • Parameters: a plain number's unit is shown as Number. (#378)

  • 3D mouse: Lock Rotation as a toggle a button can run, locked by default in a sketch; Dominant axis only keeps its axis until the cap is at rest, for steadier motion. (#367, #297)

  • Command panels show a preview being computed with a small busy mark, without resizing the panel; a new message scrolls into view. (#361)

  • Browser: in the Floating layout long names widen the rows, and the Card background has a width grip. (#365)

  • Component from Web: model previews fall back to software drawing when the graphics card's WebGL fails, and Send Feedback carries the browser's diagnostics. (#364, #333)

  • Log to a file: each session's log is kept on disk, with a line when the window stops responding and crash dumps for Send Feedback.

  • Projects with versions: sending and fetching no longer block the window on a slow network.

  • Agents (MCP): complete command references, JSON Schemas of the sketch commands, references between the entries of one command array, short errors with their details beside them, expression coordinates, a bug-reporting guide, line art as SVG and an assembly path query.

  • Many fixes in the geometry kernel's fillets, offsets, sweeps and meshing found by running its own test suites.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc3 (b2f9b40e0367), web browser component 2026.1116.810

  • Linux: rc2 (5e93445f66c2), web browser component 2026.1116.724


r/mitcad • • 10d ago

0.59.0 has been released, and it's a good'un. My thoughts and the release notes below.

5 Upvotes

Radically improved 3D sketching. Niiice.

Imported components get their own sub-component 'directory' so you don't have to remember to do it ahead of time, and the name of the component comes from the filename of the imported file. So good!

ESC aborts giant selections so you don't have to wait over a minute if you accidentally select an entire 24MB design... you can opt out of the experience if you didn't mean to do it. This was badly needed by me.

Built mode profile offset plane length. So good! You can have the profile length match at any face regardless of whether the profile will hit it!

Plain text output for BOM and cutlist... very necessary when sending e-mails to suppliers.

Snapping dragged objects in the Sketcher. This is good for all of us. If you see the little orange square when you are placing your object then it WILL get a constraint.

This release has a LOT of good stuff in it. I just hit the stuff that is a high point for me, personally. The official release notes cover more:

  • 3D sketches: Create Sketch offers 2D or 3D. Points, lines, arcs and splines are drawn in space on a placement plane that switches between XY, YZ and ZX or rotates freely, with snaps and typed lengths and offsets; circles, ellipses, rectangles, polygons and texts lie on the active plane, and Sketch Fillet rounds a corner. Relations and dimensions work in 3D (parallel, perpendicular, angle, symmetric, concentric, curvature, On Plane, On Face, spline length and more), points and curves can be dragged, edges, faces, other sketches and other components serve as references, and Copy, Cut and Paste work. (#202)

  • 3D sketch routes: Pipe and Sweep follow a chain of a 3D sketch's curves, open or closed, taken whole with one pick; lofts, path patterns, planes and points along a path, Intersection Curve and the wall and surface tools take its curves too, and all follow an edit. A 2D sketch turns into a 3D sketch in place and back again, keeping its constraints and what is built on it; Extrude takes the closed loops in a 3D sketch's plane. (#202)

  • Filament changes in the app: Send to Slicer has a Filament changes section, and Filament Change Here on a construction plane or flat face sets a change that stays at that plane or face when the model changes. While the panel is open the bodies show in their print colours with a ring at each change; each plate can have a schedule of its own.

  • Drawings: custom sheet sizes, images such as a company logo in the title block, and a title block editor on the sheet. An SVG logo stays vector graphics, its text included, in PDF, DXF and DWG. (#238)

  • Sheet metal: an ordinary cut such as Extrude or Hole across a bend keeps the sheet valid, so it still unfolds and gives a flat pattern; where a sheet is invalid, the message names the feature in words. (#232)

  • Import: a STEP, IGES or BRep file imported into a design with content goes into a new component named after the file, or into the active component as before; Component from Web imports straight into the component it makes. (#234)

  • Large designs: selecting a whole design and clearing the selection happen at once, and Esc cuts a long highlight short; adding a sketch dimension in a large assembly is much faster. (#231, #235)

  • BUILD Profile: Length can end at a picked face or plane plus an offset, and follows it when that part changes. (#239)

  • Cut list and Bill of Materials: Copy as Text and Save as Text give an aligned plain-text table, CSV rows end in CRLF, and a multi-body component with a part number is one row, not one per body. (#241, #257)

  • Thread: Auto Fix and the Thread panel fit a hole too small (or a shaft too large) for its thread by changing the dimension it comes from. Fillet, Chamfer and other body features picked on another component's body activate that component and go on.

  • Sketch Rectangular Pattern: a 3 x 2 grid by default, arrows to drag both spacings, tooltips that say where the second direction runs, and the sketch's x and y axes as Direction. (#243, #248)

  • Sketch: pasted, moved or copied geometry dropped on a snap point gets the constraint its snap marker showed. (#245)

  • View > Show > Origins and the Origin folder's eye each show the origin planes on their own. (#240)

  • Component from Web: the browser loads on Linux systems with a newer GLib and fills its view on scaled displays. (#249)

  • Project picker: New Folder makes a folder in the chosen project. The timeline starts filtered to the active component with its subcomponents, remembers the filter and shows when it hides features.

  • Press Pull's icon is easier to tell from Extrude's. (#252)

  • Finnish interface: many more messages are translated whole instead of shown in English.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Linux: rc2 (3d5068e14c70), web browser component 2026.1111.1524


r/mitcad • • 19d ago

0.41.0 and 0.41.1 have been released. Release notes below.

4 Upvotes

Below is the release notes for 0.41.0:

For macOS this is the first version after 0.39.0: it also brings everything
in 0.40.0. On macOS an experimental native interface can be turned on in
Preferences ("Native macOS interface (experimental)"); the standard
interface stays the default.

The Make tab and its 3D printing features are still changing a lot. Treat
them as a preview, not as finished features.

  • Sketches: a sketch on a planar face gets regions bounded by the face's edges and its own curves, without projecting the face first; a typed polygon size becomes a dimension; Offset adds no redundant constraints, and redundant constraints are reported in one grouped warning; Move starts at 0, so nothing jumps when its panel opens.

  • Measure: Δx, Δy and Δz as rows under Distance; Measure and the length defaults use the design's unit.

  • Drawings: any view scale ratio can be typed (2:3, 1:1.5); a thread drawn by convention no longer hides cross holes or bores of the same body.

  • Annotations: the set text height follows the model scale as you zoom, and leaders follow the drawn text.

  • Send to Slicer: a picker per filament slot for the material, a "Use the open slicer window" option, and editing printers and processes from the picker's last row.

  • Appearances: basic filament colours in the library, and the library grouped by class in the Appearances window and the pickers.

  • File > Export remembers the format and refinement and suggests the selected body's name.

  • Primitives on a fixed plane (for example made by an AI assistant) can be edited again.

  • Save Component As Design: links stay valid after Replace, and it can no longer write over the design's own file.

  • Linux: the AppImage registers a stable command, so Connect AI Assistant and the chat panel find mitcad-cli.

  • Fixes: a filament preset's trailing number is no longer read as a nozzle diameter; hidden and transparent Browser rows are drawn correctly in both themes; a manipulator knob over the orientation cube takes the click; the left column's dividers and the message box follow drags and theme switches.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc4 (5f8b873a0ea2)

  • Linux: rc4 (5f8b873a0ea2)

Below is the release notes for 0.41.1:

  • Fixed: in 0.41.0, a sketch drawn on a face bounded by fillets could find its profile differently from the version that saved the design. The extrusion got an extra sliver, and a later chamfer could leave the body open. Such designs now compute as they were saved.

  • A fillet or chamfer of a closed solid no longer leaves the body open: if no build gives a closed solid, the feature fails with a message.

  • Right-clicking a face of a surface body says why it has no print bed face.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc1 (c62200cc0dd6)

  • Linux: rc1 (c62200cc0dd6)


r/mitcad • • 2d ago

It's always the fillets!

23 Upvotes

Today's release will be a little later than planned. Due to the major UX overhaul, this release required an unusually high number of release candidates.

And just when all the UX tests finally passed, the extended test suite uncovered yet another fillet issue.

A 10x performance optimization had introduced a geometry error that wasn't caught by the smaller test suite.

We already have over 170 OCCT patches dedicated to fillets alone, so they're clearly one of the trickiest parts to get right! :)

The regression was minor, but when it comes to the geometry kernel, our goal is to avoid regressions entirely.

At this rate, I'll soon need yet another dedicated server just for running tests. Quality is extremely important to me, and I believe the only way to ensure it is through comprehensive test suites, with not a single test skipped before a release.


r/mitcad • • 26d ago

👋 Welcome to r/mitcad! Introduce yourself.

2 Upvotes

I'm a millwright by trade, but I have been a machine builder for the last 25 years and a machine designer for the last 15 years. I use 3D modelling regularly but I am far from an expert.

I'd like to see people posting their questions and their successes.


r/mitcad • • 26d ago

Best way to make multiple parts using a 'parts library'.

2 Upvotes

Let's say you wanted to model a Mr. Potato Head doll, and you wanted to have different hats, eyes, noses, etc. available so that you could put whatever parts on Mr. Potato Head that you wanted. How would you set that up? Put each part in a separate component and then use an assembly? What if you needed to be able to make 'repairs' when things didn't fit?


r/mitcad • • 10d ago

I was able to try to insert a "Component From Web"

3 Upvotes

It is FANTASTIC! I punched in the address for McMaster-Carr and now I can pull that up, pick a part, click to download the step file, and it shows up in my current drawing as it's own component with all of its bits and pieces inside that component! And it keeps the filename that has the part number! SO GOOD!

The only minor issue that I see right now is that the BOM shows each part of the part separately. It needs to collate by part number so I don't order 8 of the same bearing because there are 8 bodies in the part. But oh, man... MitCad has come SO FAR in so short a time. It's amazing.


r/mitcad • • 14d ago

CAD Fightclub

Thumbnail
reddit.com
2 Upvotes

r/mitcad • • 9h ago

Mitcad Development Process

9 Upvotes

First, let me say that Mitcad is amazing!! Kudos to whomever is behind it.

Having said that though, one reservation I have in adopting it is that the development process seems somewhat opaque. On SolidCraft's GitHub page, I can see multiple developers actively contributing, which gives me confidence that there are many independent eyes reviewing the code and development process.

With Mitcad, the public GitHub repository currently shows only a single contributor, and much of the active development apparently is happening in a private repository. Is Mitcad primarily being developed by one person, or is there a larger team behind it?

I realize that the source code is available, but I'm curious how much independent review it receives from the community. As a potential long-term user, I'm trying to understand the project's development model and how others think about trust, security, and sustainability in that context.

Am I off base in having these concerns?


r/mitcad • • 11d ago

Wow. Lots of issues this morning.

5 Upvotes

I think I have put in 7 issues so far this morning. Maybe 8.

I'm now using MitCad in real projects, and once I hit a file size of over 20MB then I started seeing some new issues. These will get fixed quickly and it will be all good. The biggest problem is that just e-mailing a 24MB file is not convenient.

Every issue improves the software, and those of us who use it know it is getting better by leaps and bounds.

I don't think there is another open-source parametric 3D modelling system that can touch it.