r/microcontrollers • • Sep 10 '21

¿The cheapest microcontroller in 2021?

I am looking for the cheapest microcontroller.

0 Upvotes

16 comments sorted by

2

u/Skyoreh Sep 10 '21

Well, Arduino and STM blue pill are not very expensive.
What price range do you need?

1

u/BlackByten Sep 10 '21

It's curiosity, not for a project

2

u/Skyoreh Sep 10 '21

Well, my first microcontroller was Arduino Uno. It's wasn't really the cheapest (not expensive at all), but it had a lot of done projects on the internet so it was really great.
You can buy it kit and get wires, sensors, motor, etc which should be enough to do some project and to see if you are interested in that.

If your budget allows it, go for it. You can get the cheap kit on aliexpress. It's 8bit, so it's perfect for simple projects.

1

u/Rude-Significance-50 Sep 10 '21

Well, my first microcontroller was Arduino Uno.

The Arduino line is a bit more than a microcontroller. They include one (generally something AVR - atmega328 in the case of the UNO) but also include a lot of other stuff, such as a second microcontroller that serves as a sort of bootloader.

1

u/Skyoreh Sep 10 '21

Yes, it's really made for a beginner and I think it's good stuff.
Also can be powered by a battery or USB cable which I really love.

It should be enough for a curious person. :P

1

u/_teslaTrooper Sep 10 '21

Those are both dev boards, not microcontrollers, or is this just a colloquialism now?

1

u/Skyoreh Sep 10 '21

You are right, it can be misleading. When I said blue pill, I meant on board with ARM Cortex M3 STM32F103C8 microcontroller. And when I said Arduino, I meant on all models, which most use ATmega328P microcontroller.

4

u/ikikenik Sep 10 '21

There are the Padauk series at a couple of cents each (was 0.03$ at some point). Dave Jones did a series about them in the EEVBlog

1

u/earthwormjimwow Oct 29 '21 edited Oct 29 '21

Wow that's actually incredible. They even have a part with a 12-bit ADC for under 7 cents, and seem to charge 2 cents or less to pre-program parts.

edit: I had been looking for an under 10 cent part to replace this thing: https://www.infineon.com/cms/en/product/power/lighting-ics/dimming-interface-ics/cdm10v/

I don't like the hard coded transfer functions it has. Originally I had designed a dual op-amp oscillator circuit to do the same function, but it was really noise sensitive. The CDM10V really does do a good job of serving its purpose with 1 part, but its really constrained on how it functions. A cheap microcontroller from Padauk might work close enough!

6

u/anlumo Sep 10 '21

The cheapest one is the one you have lying around at home. Everything else is crazy expensive.

2

u/frezik Sep 10 '21

Maybe the ATTiny4. $0.43 in single quantities on DigiKey, and immediately available.

1

u/morto00x Sep 10 '21

What are your system requirements?

1

u/pdp_11 Sep 11 '21

STM8 is pretty cheap usually, but prices for everything are volatile right now.

1

u/jhiguerap Sep 25 '21

Mcu 32 bits / 2Mb Flash / 133MHz clock frequency / 264Kb RAM / Raspberry Pico RP2040

1

u/earthwormjimwow Oct 29 '21

ST has a 32bit MCU (STM32) that is under 25 cents in high enough quantities. Very limited pinout though, its SOIC-8.

I think you should refine your question, do you mean just overall, ignoring capabilities? Or should 8bit and 32bit parts be compared purely on price alone?

0

u/[deleted] Sep 10 '21

[deleted]

1

u/BlackByten Sep 10 '21

Both 🙂 It's curiosity