r/metalworking • • 5h ago

Favorite projects so far

139 Upvotes

r/metalworking • • 7h ago

Some 1" x 6" flatbars rolled the hard way to 97" ID.. ready to be fit around tanks

Post image
61 Upvotes

r/metalworking • • 19h ago Bravo

I crochet with copper wire instead of yarn.

242 Upvotes

r/metalworking • • 18h ago

Made a display from an old waterjet drop.

Thumbnail
gallery
47 Upvotes

r/metalworking • • 3h ago

Mounts

3 Upvotes

Hi team,

I'm looking to make some mounting brackets for my motorcycle hard saddlebags, similar to the bracket shown in the picture.

I've never cut metal before, so I'm after a bit of advice.

The brackets will need to be:

- 5 mm thick steel

- 320 mm long

- A couple of countersunk holes

- Two bolts welded onto the bracket to attach the hard bags.

What type of metal cutting disc would you recommend for this job? Would a standard angle grinder be suitable, and what disc would give me a nice, clean cut?

I'm based in New Zealand, so recommendations for products available here would be appreciated.

Thanks in advance for your help! Cheers.


r/metalworking • • 6h ago

Time to choose a spindle for my manual mill rebuild. What could have been here originally? Suggestions for something new/ belt drive? 38mm

Thumbnail gallery
2 Upvotes

r/metalworking • • 6h ago

I want to cast this in copper as my first cast, any tips? I am most unsure about how to make the exact mold, whether or not to use pure copper, and how to prevent tarnishing.

Thumbnail gallery
2 Upvotes

r/metalworking • • 10h ago

First Welding Project. Looking for basic advice.

Thumbnail gallery
3 Upvotes

r/metalworking • • 8h ago

Looking for trade school advice

Thumbnail
gallery
2 Upvotes

Long story short, I'm a 33 year old dad that is looking to change career paths. I always worked in some type of labor or union job so I am familiar with welding. My local community college has this one year program that offers this. It would be fully covered by my state grant so I'm going for free and right now luckily my partner is willing to support me through this for our family and has a great job herself. This is what the course is offering. I can get in for the spring semester. Is this something I'd be able to walk out the door and secure a welding job full time ?


r/metalworking • • 1d ago

Wanted to share the horse statue my son and I just finished.

Thumbnail
gallery
703 Upvotes

We don’t know what we are doing but we’re learning together. A few months ago we didn’t know what an English wheel was.

My wife wanted a swim feature for her horses so we decided to build a little waterfall and I started looking around for a metal horse sculpture to put on top of it. The prices were ridiculous and I figured we might have fun trying to do something.

When we got done I asked him if he felt like an artist. He said no but definitely like a welder. lol


r/metalworking • • 11h ago

I want to hand-stamp a metal love letter for my girlfriend

2 Upvotes

I have a set of 4mm alloy steel alphanumeric stamps, punches and chisels (for grammatical marks) a brass hammer, and a steel anvil. I have three questions.

  1. Do you think reading a letter consisting of 4mm engraved characters would be comfortable? Should I get a set of larger alphanumeric stamps closer to 8mm?

  2. From what I've read, I should try to get a sheet of 1050-O or 1100-O aluminum. Is that what you would recommend (also how thick - I was thinking 1mm to 1.5mm), or should I go for a different aluminum grade (or different metal entirely, like copper or brass)? I'd only be looking to get a sheet about the size of a sheet of A5 paper (so probably 100x150mm).

  3. Post-stamping, what sort of treatment should I apply to improve legibility and preservation?


r/metalworking • • 14h ago

How to refurbish worn anodized aluminum coloring? This is black, doesnt need to be perfect.

2 Upvotes

I have a set of really nice black bicycle cranks that have the anodized layer faded from where my shoes rub. So the silver is showing through.

Im cleaning up the bike this winter and wondering if there was some fancy DIY method of coloring this area in black. Or readying the whole part black. Hoping for something more sophisticated/durable than a sharpe or paint.

Im pretty handy with things and have a decent abilty to handle chemicals here if needed.


r/metalworking • • 18h ago

Cutting metal pipe over gas tank.

Thumbnail
gallery
1 Upvotes

Looking for ideas and options to cut through metal risers on top of fuel tanks. So spark free ideas are kinda important. Our current direction is using a sawzall with metal blades. Slow going and burn through quite a few blades. But wondering if you had other ideas or tools that could do the trick. The risers we replace are usually corroded pretty bad are usually 4” galvanized. The rusty piping above is the only stuff we had to beat out because the we ran out of blades on the others.


r/metalworking • • 1d ago

Update on the spitfire.

Thumbnail
gallery
35 Upvotes

r/metalworking • • 1d ago

Scrap art bikes

Thumbnail
gallery
82 Upvotes

These are fun to make! I've started to make and sell a few as they seem to be quite popular, the main part usually is a cummins rocker arm upside down and forks are usually valve stems or push rods. Being a truck mechanic with plenty of friends in the game leaves me spoilt for choice with parts!! It's amazing how a few small changes in different parts can completely change the look of a bike! I use a mig welder to stitch everything together and the brass shell handgrips are glued! Here is a couple of different ones I have done, enjoy!!


r/metalworking • • 1d ago

Keeping my space clean

Post image
9 Upvotes

r/metalworking • • 1d ago

Plasma cutter or nibbler for free hand sheet metal cutting

6 Upvotes

I want to do some free hand cuts in 14-20ga sheet metal (steel, brass, copper, and bronze mostly). I'm debating if I want to invest in a plasma cutter or a nibbler. I'll probably have to invest in an air compressor also with either option. I'm trying to weigh the pros and cons of each. One sends sparks everywhere, the other makes sharp shards. What are other things, like consumables, should I consider in y'all's experiences? Whichever I get will be mainly used in my home shop but I would like to lean towards professional grade.


r/metalworking • • 2d ago

Best way to grind down fillet welds efficiently? Looking for tool/methods recommendations

Post image
47 Upvotes

EDIT: Thank you so much for all the suggestions. I'll definitly try them and consider adding other welding processes like TIG or Laser 😃

Looking for advice on grinding welds efficiently

Hi everyone!

I'm looking for advice on improving our weld grinding process in a metal fabrication workshop.

We constantly manufacture steel structures with round bars (10–16 mm diameter) welded to flat steel sections. Each structure need grinding to achieve a smooth, flush finish, as shown in the photo.

Currently, we use a standard angle grinder with flap discs, but we always make a couple hundred meters in each project, which adds up to a lot of working time.

I'm looking for faster and more efficient alternatives.

What would you use for this kind of job?

I'm particularly interested in real-world experience, machine recommendations and ways to reduce grinding time without compromising the final finish or removing too much base material. Is there any machine or equipment better suited for this kind of grind?

Thanks in advance :)


r/metalworking • • 1d ago

Welded frame flatness

3 Upvotes

For my current project (Wood flattening jig/sled) I have a need to make two frames(about 1000mm by 600mm) one of which needs to be as flat as possible, as it acts as a bed for the wood . As im familliar with welding, I decided to weld the frames. However, even with maximum clamping, double checking angles, minimum heat input and proper weld ordering, the frame still dips in the middle by 0.5mm (so about 1mm per meter)

So my questions are the following: What is the minimum weld distortion I can achieve in semiprofessional workshop. and if my result is bad, would bolting the frame together be a solution for more accurate frame?

Thank you in advance for reading, I have already tried three times to achieve perfect result but no dice 😞

Ps. the box tubing im using is 2mm thick 20x30, and I checked before welding that it is perfectly straight the frame is made with four mitered pieces welded together with FluxCore 0.8mm wire at 17.1V, 60ams


r/metalworking • • 2d ago

When a customer supplies the steel, how do you still quote the job?

36 Upvotes

I’m a boilermaker in Australia, mostly smaller jobs like gates, trays and brackets.
Every so often someone says “I’ve already bought the steel, can you just weld it up?” I used to treat that as a cheaper job, then wonder why the day didn’t pay. The steel might be free to them, but I still have to check it, cut and fit it, weld it, grind it, and often fix bits that aren’t quite right.
What I do now:
• Still quote the labour properly (fit-up, weld, grind, travel). “You bought the steel” doesn’t make those hours disappear.
• Look at what they actually bought before saying yes. If the grade, size or quantity is wrong, say so up front.
• Write down whose steel it is and that I’m not responsible for material I didn’t supply.
• Don’t let “mates rates, you’ve just got to weld it” skip the same checks I use on a normal quote.
How do other people handle customer-supplied material? Do you discount the job, keep a minimum labour charge, or sometimes just say no?
Not engineering or tax advice — just how I keep those jobs honest. Check your own figures, and if a job is structural or critical, get it properly engineered.


r/metalworking • • 1d ago

Please help! I've been looking for days, and have no idea whatsoever the taper on this is.

Thumbnail
gallery
3 Upvotes

Hey folks!

I'm struggling to find some specifics on this taper, of which I have a full set and spindle.

The thread on the end is is what seats the tool instead of a drawbar. The angle of the tool holder is so much shorter and sharper than the standard. Maybe it's hard to tell from photos but the difference to say, Morse 2, is huge

Using some cheap measuring tools, the taper is 5/8" on the thin end, 7/8" on the thick, 2.5" long, the threads are 9/16 12tpi coarse.

That's a ratio of 1/10, same taper as an HSK, only built like a B&S

I have no idea what this is, can't find it in any book or on the net.

I thought it might have been homemade, but the build fit and finish very heavily leans toward a purchased item.

I've added some pictures: one of the tapers, and a few angles of the spindle.

Any tips, leads, compliments, criticisms, all very much appreciated!

Thanks for reading this


r/metalworking • • 2d ago

350 Sprocket Lamp

21 Upvotes

Hi all, Im a mechanic by trade, and recycle what I can into something different. I enjoy making models, lamps, figurines and more. This lamp was made from a used timing set off a Chevy 350. The valve cover is from another v8 but dont remember what though. The timing set is mounted on a center shaft, and the pull chain type lamp switch is mounted toward the base. The chain is pulled when the cam gear is partially turned. Then turns off when pulled again. Thanks for looking!


r/metalworking • • 1d ago

budget friendly welder

1 Upvotes

I'm looking at getting a new welder, I have a stick one from Harbor freight but I'm just not a big fan of it. I'd like to get into a mig/flux core machine. It'll be used mainly for automotive stuff, exhaust, brackets, etc. I'm asking here in hopes that someone has a good recommendation that won't cost me thousands. With black Friday deals coming up I also figure I'll also have a better chance at getting a competent machine for a lil cheaper. Any and all advice is appreciated.