I picked up a T-Display-SF32 a while back and really wanted to run MeshCore on it with a proper
touch interface, so I ended up porting it myself. It's called Vesper, and 1.3.0 just went up.
It's not really a messenger. Your phone still does the chatting through the normal MeshCore app
over Bluetooth. The device is more like a pocket dashboard for the mesh: you see messages come
in, who's around, how busy things are, and you can test your signal to repeaters. It can also
run as a repeater or a room server if you'd rather use it that way.
Stuff I end up using the most:
- Pinging a repeater and seeing the SNR of every hop, there and back
- A LoRa network finder that shows what's on the air near you (MeshCore, Meshtastic presets, LoRaWAN)
- It tells you when a repeater picked up your message ("heard 2x"), and can resend if nobody did
- Muting channels on the device itself
- A battery graph and a low power mode. I get about a day of regular use, more if the screen's mostly off
Then there's the dumb fun part: every node gets a little critter called a Starlit, made from its
public key. Yours gets fed by the mesh traffic your radio hears, and if two Vesper boards are
near each other, their Starlits visit each other.
MeshCore itself runs unmodified underneath, so it plays nice with the rest of the mesh and the
official apps. It's free and open source (MIT), and there's a flasher script so you don't need
the SDK. I've only tested flashing on Linux so far (I'm on the 915 MHz board), so if you try it
on Windows or Mac, I'd love to hear how it goes.
Full disclosure: I built this with a lot of help from Claude (Anthropic's AI). It's credited on
the About screen.
Repo: https://github.com/Zixxorb/VesperOS
If you like it, there's a Ko-fi (ko-fi.com/zixxorb), no pressure at all. Bug reports and ideas
are very welcome, I'm still working on it pretty much every day.