r/mechatronics • • Jul 09 '25

Before You Choose Mechatronics: My No-BS Advice After 13 Years

404 Upvotes

A few months back, I posted about how I chose Mechatronics as my career and shared that I’ve been happy with it. I appreciate everyone’s support and love on the post. Since then, a bunch of young folks have been asking me if they should go for Mechatronics too, or if it’s a “good” field.

I’m not some wise guru, but here’s my honest take on why I picked it, and why it worked out for me.

First off, Mechatronics is basically mechanical engineering mixed with electronics and computer science — it’s about making things smart. Think robots, automation, smart machines, etc.

About 13 years ago, I saw that the future was heading toward hybrid systems — machines that can sense, think, and act. I was already interested in robotics and automation, so Mechatronics just felt right.

University? Yeah, it teaches you the basics. That’s it. If you stop at what the syllabus gives you, you’re basically just a textbook with legs. I wanted more.

So instead of spending money on a car or bike, I saved up for a good laptop, sensors, microcontrollers, tools, and a 3D printer. I turned a small corner at home into a mini lab. I joined forums, hung out with DIY builders, experimented non-stop.

I didn’t care about making big money or building a company to win awards. I just wanted to enjoy my work and keep learning. That mindset made me less stressed and more excited to wake up every day.

Over time, I kept picking up new skills, took on different projects, and found companies willing to invest in equipment and training because I could actually deliver value. Now, I build machines with AI, design smart products, and basically get to play with cool tech as my job.

My honest advice?

If you’re really into robotics, automation, or smart systems, go for Mechatronics. But if you just want a “safe” job to survive and get a paycheck, please don’t pick engineering at all.

Engineering is for people who like solving problems, thinking analytically, and constantly learning new stuff. If that’s not you, you’ll just end up as another “graduate engineer” doing random work for low pay, or you’ll drift into something else (like IT support), and complain that life sucks.

At the end of the day, choose what you want. Not what your parents, friends, or random YouTube influencers tell you is “good for your future.” Only you know what you actually enjoy.

Anyway, that’s my 2 cents. Hope it helps someone out there!


r/mechatronics • • Dec 02 '24

I just Completed my Thesis!!!

Post image
276 Upvotes

Don’t know why I’m posting it here but I’m so ecstatic !!!


r/mechatronics • • Oct 05 '26

Drone as a first year mechatronics project

Post image
232 Upvotes

Heyy guys, i'm kinda new to all of this and for the end of my first year project at uni i'm building a 5 propeller drone. I essentially want to build and program the flight Controller by myself and chatgpt helped me draft a circuit on how i should build the drone. I am in the process of ordering the parts that i don't have here locally but i wanted to share the schematics of the drone and ask if ya'll have any feedbacks advices or can refer me to subreddits that you know could help for the project. Any help is appreciated. Thanks.


r/mechatronics • • Mar 12 '21

Finally got it to go through a full cycle

207 Upvotes

r/mechatronics • • Jun 19 '20

SEER has obtained real-time face-mirroring ability

190 Upvotes

r/mechatronics • • Jun 17 '21

Meet SLink1. I designed this 3D printed, 6DoF robot arm for my bachelor’s thesis in mechatronics.

166 Upvotes

r/mechatronics • • Sep 15 '25

Worlds cheapest humanoid

Post image
152 Upvotes

This is nova the worlds cheapest humanoid that you can build in your bedroom


r/mechatronics • • Dec 23 '24

Mechatronics Engineer- 9 Years in Industry

145 Upvotes

Hi fellow engineers,

I just wanted to share some positive thoughts.

I graduated in 2016, from there I worked as an Automation Engineer (Labview), Then I switched to Internet of Things. From there I ended up in Entertainment.

I am enjoying my current job in entertainment in which I am creating Hardware and support accessories for Movie production, Arcade gaming machines, Drone shows, Pyroworks, Lighting, 7D equipment for VR and etc.,

Mechatronics is the key future. So don’t give up. Keep practicing your skills.


r/mechatronics • • Sep 07 '20

As mechatronicker, i found this funny hahha

Post image
133 Upvotes

r/mechatronics • • Sep 19 '25

Mechatronics engineers are also kind of embedded engineers. Isn't it?

132 Upvotes

r/mechatronics • • Jan 06 '22

Help with my inverted pendulum project?

125 Upvotes

r/mechatronics • • Sep 11 '26

AI is getting terrifyingly good (e.g., GPT-6 doing PCB design). How do we protect our value and expertise as engineers?

119 Upvotes

Hey guys, 25yo mechatronics engineer here. Just needed to vent a bit and maybe get some advice from people who have been in the industry for a while.

I do a lot of 3D modeling in Fusion and schematic/PCB design in KiCad, plus a bunch of physical DIY hardware projects for uni. I really love this field, but honestly, the recent AI leaps are starting to freak me out.

We all saw what happened with digital artists and designers—companies started hiring people who just type prompts instead of actual professionals because it's faster and "good enough." Now it feels like it's coming for engineering. With stuff like GPT-6 generating entire PCB layouts and writing complex control code in seconds, the writing is on the wall. It’s amazing tech, but also terrifying.

Don't get me wrong, I use AI everyday. It’s a huge help for debugging code or learning new concepts. I know it’s supposed to be a tool to help us, not replace us. But it's really demoralizing to think my engineering knowledge and the time I spent learning could get undermined by some guy who just learned how to use an AI tool a month ago.

I know AI can't solder components, or mechanically tune stepper motors on a custom build (yet lol). The physical integration is still on us. But the design and software side is getting eaten up fast.

How are you guys adapting to this? What specific skills should I be focusing on right now so I don't just become a glorified prompt engineer in a few years? How do we keep our value when the AI can do the desk work 10x faster?

Would appreciate any honest thoughts.


r/mechatronics • • Jan 25 '23

Plate with servo motors centring a metal ball

118 Upvotes

r/mechatronics • • Mar 23 '26

Need help with college

Thumbnail
gallery
114 Upvotes

so I am a senior in college and I been watch to mechanic i have done project like I make a vr hand and a drone but my mom is trying to convince not to do it any help or advice for me?


r/mechatronics • • Mar 26 '21

To all those wondering were to start with mecatronics

99 Upvotes

Old comment from this post.

I hope it helps give everyone a bit of insight when it comes to what you can do to prepare yourself.

If you will be going to uni/college/wtv they call it where you live, ATTEND ALL LECTURES, DO ALL YOUR HOMEWORK AS SOON AS THEY ARE RELEASED. I can 100% assure you doing this consistently assures you a pass grade at least.

Hey, 4th sem Mecatronics student here.

Mecatronics is about automation (mainly), and this involves some indepth knowledge (to some extent) of Electrical Engineering, Mecanical eng, and programming. Given that you are interested and tought yourself some stuff is great! I listed a few important things below that will definitely help, you dont HAVE to learn EVERY thing, just basics here and there.

As much as i love being curious and it helps a lot, too much will only make you bite more than you can chew. Go easy, take bits by bits and make sure to grasp it correctly.

Maths

You will need a good base in Maths. You don't need to be Einstein, Maths will be used in literally everything you do. Statics, Dynamics, Thermodynamics, name it. You need Maths, don't be intimidated, attend lectures and do all the exercises you are given immediately. The most widely Maths book to my knowledge is Calculus by James Stewart (recommend the 7/8th Edition).

Pick these courses on Khan Academy

  • Get Ready for Precalulus

  • Precalculus

If you feel like you have enough time you can go on with Calculus (Limits & Continuity, Differentiation, Integration and Differential equations), but meh not so necessary for now.

Electrical Engineering

You need to know basics (current, voltage, power ohms law etc) and basic electronic components like resistors, capacitors, etc and how they work. These consepts are sometimes not easy to grasp because you cannot immediately see a clear application irl, but trust me you can easily learn this on your own.

You can follow this course on Khan Academy, you dont really need to go further. There are other basic courses but meh. Don't really bother yourself with Electronic components so much or Analog/Digital Electronics.

A book i can recommend is Fundamental Electrical & Electronic Principles from Christopher R Roberston. It's short and concise, i like it a lot compared to the bulkier Introdoctury Circuit Analysis from Boylestad (Althought these books do not aim for the same thing, they both cover basics of EE).

Mechanical Engineering

Hmm honestly i can only recommend you to learn stuff like Newton's laws of motion, and some other basic stuff from Statics & Strength of Materials. No need to go in depth, really. All of this stuff i mention you will be taught in school (programs vary but overall aim at the same skill set).

Comp Sc

Honestly here i will just recommend you to be very good with computers, not just programming. Out of being usefull (and giving you an upper hand on others), it helps a lot with personal life. (Un)fortunately lots of knowledge comes with experience. From shortcuts to how programs work, the different OSs, computer architectures, etc. At this point only curiosity can help you.

I started coding at 11 with C, and was just curious all the time. I will click on a wikipedia page, realize i didnt know something, click on the definition, find references i dont know about, and keep going.

Learn about algorithms, flow charts, how programs are made, some history here and there, computer generations, etc. Do not try to read and do all at once, this is just examples, you will discover things by yourself.

When it gets to programming itself, C is probably what you will want to learn before moving onto C++ or Java. C is the basis on which lots of imperative and OOP languages are built upon. So get a good grasp of C, its history, applications, and most importantly, work on projects! real life achievable ones! Don't try to build a car with scrap! Look around you all the time and ask yourself what simplified version of a program or real life problem you can solve with the knowledge you have. Gradually you can improve on what you have already built. For ex a calculator:

  • Start with basic operations

  • Add the ability to return to menu using loops and a menu

  • Add more operations, etc...

I will heavily recommend this Medium article and particularly Codewars. It gets you to see how ingenious some people can be!

Also, Git! Git is so essential when it comes to coding. They will probably never even mention it in school, but it is very good to know how to use Git when coding. It really is easy, the article will walk you through. (Litlle tip with Medium, deactivate cookies to be able to read article for free ;D).

C++ and Java are nice to know but don't bother with Object Oriented Programming (OOP) or now, C should be enough for just your own personal knowledge. Maybe some Javascript to make fun web stuff if you are interested :D

Anddddd my TED talk is over, once more, don't rush into trying to learn all of this at once. It comes gradually, bit by bit. If anything is confusing, dig deeper. If you still cant, take a break, move to something else, play a game, go out etc.

Good luck fren!

All gonna make it!


r/mechatronics • • Jan 17 '23

It works! Finally! Blood sweat and tears for some Legostone to be moved lol

96 Upvotes

r/mechatronics • • Aug 29 '25

Are mechatronics engineers ducks?

86 Upvotes

Think of it a mechatronics engineer can do mechanics, electronics, and coding but can't do mechanics as well as a mechanical engineer can, electronics as an electrical engineer can, or coding as a computer science student can, just like a duck can walk, swim, and fly, but none of them as well as a cheetah, fish, or eagle can.


r/mechatronics • • Nov 09 '25

China has launched drone firefighting technology that helps in extinguishing fires and conducting aerial rescues in high-rise buildings

83 Upvotes

r/mechatronics • • Mar 31 '22

Checkout my hexapod. It uses an Android phone as the main controller. What do you think? (I only have one of these, I edited the video to include more moves)

83 Upvotes

r/mechatronics • • Nov 19 '25

Why do other engineering departments get so pissed when I say Mechatronics does part of what they do

79 Upvotes

I was catching up with a second year software engineering student who asked what I was studying in college. I told her Mechatronics, and she asked what it was about. I said “in simple terms, mechanical, electrical, and software engineering combined.” This seems to of hit a nerve in her, and she starts if by mocking me, saying that we don’t do software engineering. I continued to explain how we do part of software engineering, as it’s an interdisciplinary course. I also showed her that Mechatronics engineers can work as software engineers, with proof. She seemed pretty pissed, and even made a remark saying I overestimate what my course can do, and we should wait and see where I end up working. This isn’t the first time I’ve seen engineers irritated or pissed about Mechatronics, but I genuinely don’t know why.


r/mechatronics • • Jan 11 '22

Calculating belt lengths in CAD is tedious, so I created a simple calculator for me and all you mechatronics engineers designing your own systems! Link in comments.

Post image
78 Upvotes

r/mechatronics • • Sep 14 '26

Capstan drive

Post image
72 Upvotes

Hello I am looking for some advice. I am doing my thesis project about capstan drives. It includes designing, 3D printing, circuit design and programming using some kind of microcontroller. My question is, what kind of motor should I use? Brushless of brushed DC motor or stepper? I want to implement a closed loop PID or PI position controller if its a DC motor.

Sorry for the messy background 😅


r/mechatronics • • Sep 27 '21

The first axis of SLink2, a 6DoF, 3D printed robot arm based on SLink1. Details in comments.

72 Upvotes