r/mazda3 • • 7h ago

Joke/Shitpost Got WoW: Forever running on my Mazda 3

199 Upvotes

Please excuse my excitement haha

Edit:
It’s only good enough to mess around for a bit, there’s a pretty hefty input delay. The frame rate is fantastic though. The resolution is okay but good enough for what it is.
I’m using a CarPlay adapter that has an HDMI input
I like for when I go camping

I can’t believe I have to say this but obviously don’t play wow while you drive wtf


r/mazda3 • • 5h ago

New Purchase New Shoes

Thumbnail
gallery
74 Upvotes

New shoes for my 2023 pp+. Decided to go down in rim size. Put Goodyear F1 All Seasons on. It’s been a total game changer.

Fitment:

Tires: 245/45R17
Offset: 40mm
Rim Size: 17X9
Rims: Enkei TS-V


r/mazda3 • • 3h ago

Beauty Shot Watch out for deer :(

Post image
26 Upvotes

r/mazda3 • • 7h ago

Beauty Shot Over a year in my Mazda

Thumbnail
gallery
22 Upvotes

It has been 14 months since I bought my Mazda 3, and after 18k miles, I must say it has been a cracking car so far. 2.0G, 6-spd manual. About as simple as drivetrains come. The car has been as far south as Kent and as far North as the Scottish Highlands, causing me no serious problems in that time.

Other than a slight lack of power, and the 7" wide wheels which make tyre choices expensive, I'm really pushed to think of what I would improve. This 2017, 70k-mile example needs a few jobs done to get it back to standard. Notably, new front parking sensors, door mirrors and a dogbone mount to cure some mild drivetrain movement.

My big question down the road will be whether to go for a newer BP generation with the 2.5G or 2.0X, or get the larger 6. Should have bought a Mazda years ago.


r/mazda3 • • 3h ago

Modification Of course I ran out of material

Thumbnail
gallery
10 Upvotes

Be interesting to see if what I have done makes any difference in noise whatsoever.

Kilmat was about as easy to slap into place as anything, and it's always fun to take apart ones car 🤣


r/mazda3 • • 6h ago

Technical Check engine at 73k right after oil change due at 3kmiles

Post image
9 Upvotes

Did anyone ever experience something like this? I have an appointment but right now it will be a couple of weeks in our area for dealership appointments.

When the oil light came up since its within 600miles of almost due to change, the engine one came up. I wonder what it can be. Its a 2022 mazda 3 never had issues always took care of it, oil changes, gas never below quarter, filters changed, coolant checked. Im not a car guy trictly, sorry I would only know reading codes thanks to the internet I just dont have the device.

UPDATE: P0126 - supposedly low on coolant. A cup size of coolant was added but no change.

Thermostat is a potential although car wont overheat. I may just get this changed since this is typically the life expectancy of it.


r/mazda3 • • 8h ago

Modification Figured out how to disable Cylinder Deactivation 2024 Mazda 3 Sport GT Manual, 2.5L Skyactiv-G, or other cars with same engine.

Thumbnail
gallery
9 Upvotes

I was struggling with exactly how to deactivate cylinder deactivation, so i will try to save others some time. Should work with all 2.5l Skyactiv-G engines but idk.

You can know if your car has cylinder deactivation by the 8th character of the VIN. If "L", NO cylinder deactivation. If "M", you car HAS cylinder deactivation and can continue.

Just unplug the circled module, on the drivers side of the engine. Will throw engine light, and if you scan (with my rudimentary cheap scanner) it will show a "P3427(00)" code, in the 3rd photo. I would recommend one to try to seal off the connections somehow to prevent corrosion from forming in the long-term. I cut the fingers off of some rubber gloves.

There is also another module on the upper part of the engine, passenger side (second photo). Allegedly unplugging this one will also.

Also setting the maintenance schedule manually to the shortest interval (500km) will also allegedly trick the computer into deactivating cylinder deactivation, but I haven't verified it.

Its my first reddit post so I'm sorry if its missing anything. Hope its useful and please feel free to reply to the post if any questions.


r/mazda3 • • 22h ago

Beauty Shot Snowflake in the Sun ☀️ ❄️

Post image
92 Upvotes

26’ Premium Hatch M/T
Snowflake White Pearl on Red


r/mazda3 • • 1h ago

Advice Request Towing capacity Mazda 3

2 Upvotes

I know this is odd, but I’m thinking of installing a receiver and hauling a motorcycle trailer at approximately 1304 total lbs with my 2017 Mazda 3 sport. I know the US version is not rated but the Australian version is at a little over 1300 lbs.

How bad of an idea is this? The distance is about 140 miles.


r/mazda3 • • 5h ago

Advice Request Has anyone dealt with similar crash damage before?

Post image
4 Upvotes

Just got into a minor... entanglement with a semi and wound up being found at fault. Has anyone dealt with a similar crash on a gen 4? Fender will probably stay the way it is but I have no idea if this is gonna be a case of having the door fixed/reshelled/replaced outright. Door latches and opens, window goes up and down and as far as I can tell everything is functional. The mirror got bent backwards and even though it works I'm assuming that's gonna need replacing too. I would appreciate any advice on whether to send this to a dealership or body shop and if anyone has ever received an estimate for this kind of repair.


r/mazda3 • • 11h ago

Technical Mazda Nav does not work after installing AA/Carplay hub

Post image
9 Upvotes

I just acquired this 2017 Mazda3 GT and bought this kit: Amazon.com: Mazda Carplay Retrofit Kit, TK78-66-9U0C OEM Hub Fits to MZD Connect System | Apple Carplay Android Auto USB Replacement Part Compatible with Mazda 2/3/6/CX3/CX5/CX9/MX5 2014-2029 (2026 P2 Upgraded) : Electronics

I hired an auto technician (local shop that specializes in car audio installation) to install it.

Android Auto and Apple Carplay both work fine. However, the speed limit no longer shows up on the HUD and the navigation does not appear to be recognized. I get this screen when pressing the NAV button.

I read through the thread on the mazda3 forum, and I checked the SD card is unlocked (even after removing) and soft rebooted the CMU.

any other suggestions aside from taking it back to the installer and have them check for loose cables?


r/mazda3 • • 2m ago

Advice Request Knock or something issue

1 Upvotes

Hey guys i got a 2.3 bk S touring sedan. And i have 2 issues. 1st i got vvt rattle on cols start and 2nd under load like 3rd gear over 4k rpm it get knocking like sound but not sure if it is knock or some mechanic rattle as it does not make the sound on N, does anyone had any similar issue on the past


r/mazda3 • • 6h ago

Advice Request Comparison!

3 Upvotes

Hey! Wanted to hear from Mazda3 owners about comparisons against the Subaru Impreza Wagon! My partner and I are looking at the two options, I’m evidently biased towards the Mazda3 (Likely AWD Turbo?), but the Subaru Impreza Wagon in a manual would also be fun. Looking for a fun daily driver, I am personally upset I wouldn’t get the turbo noises with the Impreza…any thoughts from people outside the discussion?


r/mazda3 • • 50m ago

Advice Request Mazda 3 - 2017

Post image
0 Upvotes

Tried to turn on car and it beeps twice & then beeps 3 times. With this sign flashing even when not pressing anything.

I have pressed the key on start button to start and obviously with pressing break still nothing

Car Key battery has been replaced
Car battery has been jump started
Got a car key ready everything is fine with both keys

Had road side assistance come out to jump started the battery. They said potentially key is not been recognised by car

Need some advice


r/mazda3 • • 1h ago

Discussion Mazda3 Turbo - Exhaust Options

1 Upvotes

I’m finally in a position financially to start modifying / upgrade my Gen4 Turbo Hatch. What are some exhaust options you’d recommend? I’ve heard good things about CorkSport, any other recommendations?


r/mazda3 • • 11h ago

Advice Request Can the steel be saved, or is replacement necessarry?

Thumbnail
gallery
6 Upvotes

Hi guys, I just got my beautiful red one, and managed to catch a concrete corner in a garage. The steel is not pierced, only scratched and pressed in - do you think it is possible to save the part, or is replacement necessary? The guy at the dealership was all about replacement, but I'd like to hear more opinions.


r/mazda3 • • 18h ago

Modification Did some DiY on my recent purchase

Thumbnail
gallery
17 Upvotes

Painted the brake calipers and installed some interior ambient lighting.

For the paint I used the Foliatech Rosso Red kit and ambient lighting is the Dreamcolor 18 in 1 kit from Amazon.de https://amzn.eu/d/0i4p5D9Z

Let me know your thoughts!


r/mazda3 • • 12h ago

Beauty Shot Just hit a milestone on my 1st generation 2.3l / 2008 !!

6 Upvotes

Straight 1s. Noticed it when I went to leave work this morning.


r/mazda3 • • 9h ago

Advice Request Anyone running 225/45 R18 winter tires instead of the factory 215/45 R18 ?

3 Upvotes

Hi everyone,

I own a 2024 Mazda 3 Sedan 2.0 Skyactiv-G 150hp with the factory 18-inch Mazda wheels.

The factory tire size is 215/45 R18, but I am considering switching to 225/45 R18 for winter tires.

Has anyone tried running 225/45 R18 on the stock 18-inch wheels ?

I'm particularly interested in:

  • Does the car handle differently?

  • Any rubbing issues when turning or with passengers in the back ?

  • Any noticeable difference in comfort or road noise ?

  • Would you recommend sticking to the factory 215/45 R18 instead?

My current tire choice is the Michelin Pilot Alpin 5, but I'm also open to other recommendations.

I would appreciate hearing from anyone with real world experience running this setup.

Thanks!


r/mazda3 • • 3h ago

Advice Request Driver side speaker not working

1 Upvotes

I have a 2012 Mazda3 S Touring. The speakers are phenomenal and the best I've ever had in a car, better than head phones even. However, I have noticed that the big BOSE speaker on my driver side door isn't playing anything. No sound coming out of it at all. I noticed it happen about 4 or so days ago, do any of you guys have some ideas, or am I just going to have to try and find one somewhere? I'm really bummed about this, music still sounds great but its an absolute shame.


r/mazda3 • • 1d ago

Meta hilarious coincidence lmao

Thumbnail
gallery
99 Upvotes

I have a warranty and waiting on the tow but basically it’s had a weird stutter in the transmission for a while but nothing major. Dealer checked it out a year ago and didn’t find anything wrong. Last night it started jumping really bad as it shifted down and then today when I went to stop at a stop sign it got stuck in neutral. The dash still says what gear it’s in but the car won’t move on its own. We were able to push it to the lot I’m in now.

It’s a 2023 carbon sedan with 62k miles. Hopefully nothing too major.


r/mazda3 • • 6h ago

Advice Request Anyone discolor or damage the center of the wheel or other chromed parts?

1 Upvotes

I use kinda strong chemicals on my new mazda 3 from time to time to detox / prep for polish and ceramic.

Has anyone ever damaged the Mazda logos or other chromed plastic on the car with products like iron remover, pre-washes, etc?

TIA


r/mazda3 • • 8h ago

Technical is AWD on the 21 and 22 worth it?

1 Upvotes

so i’m looking into a mazda3 (2021-2022) and i landed on the FWD ones without cylinder deactivation

however i was thinking recently about getting an AWD trim because of the heavy rain and then the random heavy snow we get for a week every year

but i heard about rear differential issues with the 19-22 models so I was wondering if anyone had any issues with it and if it’s worth it or if i should just get fwd

(i really would rather not get one with cylinder deactivation ik it can save a good amount of fuel but it’s just to prone to issues imo so going for a 23 or 24 won’t really work)


r/mazda3 • • 1d ago

New Purchase New to Mazda

Thumbnail
gallery
73 Upvotes

Thought I would introduce myself. New owner of a 2026 Mazda 3 Sport GX auto, so far I absolutely love this little car. Sharp handling, really fun to drive and a comfortable daily. I love that it’s simple: 4 cyl NA, FWD, buttons and knobs. It’s great there is no big iPad screen too.

A bit of my car history. My last two vehicles were a fairly modified 2011 Fusion Sport AWD (exhaust, ported intakes, suspension, etc) which under the skin is the same chassis as a Mazda 6.

My car before my Fusion was a 5 speed manual 1999 Mercury Cougar. This was heavily modified (3L swap, full exhaust, suspension, etc). This Mazda reminds of a lot of that car. Really fun to drive but a better mix for daily driving. The solid motor mounts and subframe connectors made this a bit of a headache.