I'm looking to build a frame out of some extruded aluminum 20x20 mm t-slot. The majority of the frame would need to be regularly assembled and disassembled, and I was hoping to get some guidance on how to do it as easily and quickly as possible.
I chose t-slot extruded aluminum because it's far cheaper than any other option I can come up with (while still potentially being easy to assemble/disassemble) and it's well supported by hardware and other options. I can get 2020 t-slot for around $0.16 per inch. I'm willing to consider other options if it's at most around $0.40 an inch or so and would be otherwise easier to assemble or possess other advantages over 2020 t-slot. The main function of the frame is just to provide a general structure, and to mount a small amount of hardware onto it. It'd need to support 30-40 pounds at one point, and I can surely reinforce this section if needed with a few extra rails/extrusions.
I've seen "quick frame connectors" but I'm not sure they'd be quicker from all I'm gathering.
I'd need to connect square frames to straight pieces repeatedly. In other words: I would have a 2D square in the X and Y dimensions, and I'd want to connect a straight line in the Z dimension at each edge/corner of the square. Then, I'd have another square frame on the other side of the Z dimension lines, to create a box. The actual design is slightly more involved than this, but that's the basic idea (just repeated a bit).
A small amount of connections could be hinged, but I don't know of an easy way to make a solid box (with additional things mounted along the t-slot rails of the frame) fold flat without some disassembly. The hinges I do have in mind would be somewhat atypical, more on that below.
I'm estimating around 30 connection points which need to be disassembled and reassembled each time, so anything I can do to make this process easier would be super great.
Connecting hardware
What should I look for in connecting hardware? My plan was to use open gusseted corner brackets for every corner (eg: https://www.mcmaster.com/5537T518/), and maybe some surface brackets for straight extensions (eg: https://www.mcmaster.com/5537T948/). Anything else I should look for which might be quicker? My idea was that if I just keep one side of the hardware attached to the rail, and on the other, I just remove the bolts, it should be as simple as lining things up and hitting it with an impact driver (if the t-nuts are fixed in place, see below).
Spring T-nuts
I know there's some spring loaded t-nuts on McMaster which attempt to hold the t-nut in place, but I'm not sure if they'd be the best choice or if they'd work well enough. If they hold the t-nut VERY firmly in place where they'd very rarely need any placement adjustments, then that may work well enough. But the McMaster options here are all "drop-in" meaning they could come out of the rail, so I'm not fond of that if they're easy to lose, get knocked out, etc.
Other ways to keep t-nuts in place
If spring loaded t-nuts don't work super great, I was loosely considering jb-welding (or another similar material) standard t-nuts in place along the rails, but I'm slightly concerned about getting this to line up perfectly for repeated assembly and disassembly. It seems like it might be an easy thing to screw up, or it might be easy to get the bolts jb-welded into the t-nuts while I'm waiting for the t-nuts and jb-weld to dry (causing a big mess).
I don't really need the jb-weld to be structural exactly, I just want it to hold the t-nuts in place. Maybe I could just put jb-weld around where the t-nut should sit, so that the t-nut can't slide out of the section of the rail where it should be? If I try to jb-weld the nuts fully to the rail, then the jb-weld would be subjected to the stress of that portion of the frame (thus making it structural at that point). Is there an easier way to fully keep the t-nuts in place, if the springs nor the jb-weld are super appropriate? Again, the whole idea is just to make it easier to disassemble/reassemble this.
Flat panels
I need to mount flat panels along the t-slot frames (think the sides of the "box"). My plan is to find brackets something like this: https://www.mcmaster.com/5537T305/ Which holds the panel mostly flush with the outmost edge of the t-slot frame, as opposed to holding it inline with the groove of the t-slot itself. Open to other ideas if there's an easier way to put side panels on. These panels would not need to be disassembled frequently.
Hinge
Is there a good way to hinge two t-slot extrusions inline with each other? Eg: [---] + (hinge) + [---] = [---][---] I've found hinges for t-slot, but they seem to be designed for putting two t-slots side by side, not two straight inline with each other. I'm not sure if it would work the other way or not.
Torx bolts
Is there any t-slot hardware made for a torx drive? I figure that if I'm disassembling and reassembling a bunch, it'd be good to get torx over hex, since it has better hardware lifespan (designed to wear the bit out, not the fastener head). I'm sure I could just buy separate bolts instead, but was wondering if this was common. Looks like most 2020 t-slot nuts are M5, so I'm sure I can just get any torx M5 bolt at appropriate length from McMaster and call it a day.
Recap:
Any other materials beside t-slot which would work better without being way more expensive? T-slot is sturdy, cheap, accessible, and modifiable.
Any better connecting hardware which I should be considering over the choices above?
Do spring loaded t-nuts work well at holding the t-nuts exactly in place?
Would jb-welding t-nuts in place work well, or am I just asking for trouble?
Inline hinge of two t-slot pieces?
Torx hardware?
Is the panel mounting approach valid, or is there something else I should consider for adding side panels?
Any other general advice?
Thank you very much! I really appreciate the assistance greatly.