r/longboarding • • 5h ago

Gear Show-Off Being an adult means buying your own toys

Post image
42 Upvotes

Picked up this isinwheel v10 pro, ever since having kids, I honestly can't remember the last time I bought something just for myself. It's always been something for the kids or something the house needs.

So I figured it was about time I treated myself. I haven't been this excited about a new toy in years.


r/longboarding • • 14h ago

Gear Show-Off Attic find! First gen Wolfshark

Post image
60 Upvotes

Found one of my fav freeride boards from back in the day again, loved doing toeside slides on this one!


r/longboarding • • 20h ago

Gear Show-Off Bought a new board!

Post image
45 Upvotes

After doing a lotof downhill back in the day I am looking to get back in the sport and I found this apex 34 DC in a near mint condition with bear trucks and fatfrees.
Nearly stole it for €130


r/longboarding • • 1d ago

Gear Show-Off Ordered a Drop Cat 33” from Zumiez and someone left me this note… Hahaha. Will be a repeat customer.

Post image
71 Upvotes

r/longboarding • • 2d ago

OC Action Yoooo wth landyachtz! I thought your boards were invincible!! (Switch 35)

Post image
68 Upvotes

Any similar experiences guys?


r/longboarding • • 3d ago

OC Action Week one progress, Mann I wish there were more hills around.

194 Upvotes

r/longboarding • • 3d ago

OC Action Hit 1000 miles (1600km) on my boards this year

Post image
31 Upvotes

r/longboarding • • 3d ago

Gear Show-Off DB Lunchtray

Thumbnail
gallery
33 Upvotes

Just picked up this mint condition DB Lunchtray with some Ozones. Slapped some good ole Cronins on it and now I've got me a nice old school freeride setup. I loved this board so much I had to get a fresh one to replace the old beat up and reshaped (which made it boring) Lunchtray I've had for like 12 years now.


r/longboarding • • 3d ago

Gear Show-Off It’s time…

Thumbnail
gallery
62 Upvotes

My trucks finally arrived, and I just put this beauty together!

Setup:
Pantheon Nexus Deck
Pantheon Karma Wheels (dyed black)
Paris v3 165mm 50° trucks
87.5a Canon riptide bushings
Zealous Bearings

Can’t wait to whip this thing around!


r/longboarding • • 4d ago

Gear Show-Off I think this is somewhat useful for longboards without a tail.

67 Upvotes

It doesn't affect the overall appearance, makes it easy to pick up, and allows the board to stand upright when stored.


r/longboarding • • 4d ago

Question/Help /r/longboarding's Weekly General Thread - Questions/Help/Discussion

3 Upvotes

Welcome to r/longboarding Weekly General Thread!

Click here for previous Weekly General Threads.

Click here for the latest Buy/Trade/Sell thread.

Thread Rules: Please keep it civil and respect the opinions of others. If you're going to downvote someone, do it only if they are wrong and explain why.

There is no question too stupid for you to ask. We are all here to help you. If you have anything in mind, ASK IT!

SUGGESTION: If you are coming into the thread later in the day, please sort by new so new questions and discussions can get love too.

Join our live text and voice chat here on our Discord Server.

Remember to follow Reddit Content Policy and our Subreddit Rules


r/longboarding • • 4d ago

Gear Show-Off Low height, big wheels cruiser?

Post image
9 Upvotes

r/longboarding • • 4d ago

Gear Show-Off So.. Quarantine has been productive. All my hand-carved and painted boards so far.

Post image
2 Upvotes

r/longboarding • • 5d ago

Gear Show-Off Pranayama? Now “Pumpayama”!

Thumbnail
gallery
56 Upvotes

I love my Pranayama, but I also like pumping. Modified it to be able to push and pump! The best of both worlds for that board!

Converted my Pantheon Pranayama into a low-riding LDP pumping board using:
Front: Bennett Vector TKP truck, mounted directly without wedges.
Rear: Randal RII RKP truck with the 35° baseplate flipped/reversed to reduce rear steering.
Wheels: Orangatang Caguamas 85mm, 80a (orange).
Mounting: Both trucks mounted beneath the deck, with no additional wedges.
The goal was to create a pumpable setup while retaining the Pranayama’s low ride height and excellent pushing characteristics.
It’s a budget-friendly conversion using conventional trucks instead of expensive precision LDP components. Surprisingly effective for a board that wasn’t originally designed for pumping!


r/longboarding • • 6d ago

OC Action CNC Machined Shortboard Mechanical Engineering Project

Thumbnail
gallery
49 Upvotes

I have a keen interest in making a showstopper longboard similar to the one I currently ride (last photo), but much more challenging to make. I want to one-up DATRON's board, but on the Neo, since I am the primary machinist at our Makerspace's Datron Neo CNC machine. I want to improve their board since I have input from riding it, and challenge myself to make it with more complex geometry and in multiple parts, as the Neo has a 400x500mm2 machining area.

I want the board to have smooth drop-down curvature that makes pushing easier and gives a lower center of mass. I also want curvature along the width of the board that cups your foot and gives better control. The first picture shows an early-stage 3D-printed prototype of one half of the board to ensure the trucks fit. The rectangular cutout was to save material.

There will be relief pockets in the bottom of the board. Since pentagon is bestagon, I chose the Cairo pentagon pattern to remove material whilst having a repeating pattern. Furthermore, the top surface will have knurling for grip, with a particular geometry that provides grip without shredding shoes. Both of these are similar to the current board I have.

Other features include threaded holes for 3D-printed rails to run along the sides of the deck for protection, and covers at the ends of the board so I don't scratch it when I pop it up.

I will need to fixture the billet for the board on the Neo without having to reprobe it between the top and bottom side machining operations. This is because the Neo has a legacy probe and, even after calibrating the hell out of it, is very inaccurate, costing ~$8k to replace. If I reprobe after the flip -- the standard workflow -- the top and bottom wouldn't align properly.

My plan is to cut a plate of aluminum that was generously donated by our campus's machine shop to the size of the machining/vacuum table area (probably needing to face it too, as it is a bit dinged up). Then, fixturing it with the Vacutable, I will cut a rectangular slot precisely the size of the aluminum board billet diagonally across, which maximizes length. The board billet will have to be cut with the corners at the top, bottom, left, and right (looking at it from the side) removed such that there is a sacrificial tab (to be cut off at the end) on both ends for the purpose of fixturing it via bolts that pass through these tabs and thread into a hole I will have to machine into the fixturing plate. There will also be two precision-ground dowels ~6 mm for the purpose of perfectly aligning the board when I flip it upside down after machining op 1. I haven't decided whether to cut the top or bottom first.

I expect the board to behave like a tuning fork if I machine the drop down first, so I might cut out the bottom side and pockets first. Either way, to assist in the machining of the second op, if needed, I will be 3D printing a space filler that helps secure the board. This will be absolutely necessary if I do the top side first, as the board will behave like a tuning fork and resonate (bad for the finish and the spindle).

I will be running FEA simulations in SOLIDWORKS to verify that the loading of me going off of curbs and such (probably running with 2000 N) will provide an adequate factor of safety. Then, as necessary, I will iteratively mitigate stress concentrations. I expect that the initial design I have now will have issues at the truck mount - board interface. However, we will see if my initial design works or if a rework will be required.

The result of these efforts will be a very short longboard, which I endearingly am considering calling a shortboard. It will be so short I probably won't be able to fit both feet on the actual deck, and will likely rest the other foot on the rear truck mount when coasting.

Additionally, it will be an easily repeatable process, so given the raw materials and tooling, I will be able to make multiple boards so I can interchange them or sell them; however, due to the slightly inaccurate probe, all machining operations will have to be conducted back-to-back, or else I will risk losing my origin.

The truck mounts will likely be much easier to machine as they are flat and can stick directly to the Vacuutable.

Some thoughts I have at the moment for the design are as follows:

-Should I attempt to sacrifice the continuous outer skin at the top of the longboard so that the pentagonal grid of pockets goes right through the board? I will verify via simulations the feasibility of this, if it is even worth considering. I know that if they go through the skin which acts like a shear membrane to carry in-plane stresses and make it much less flexurally rigid. It would look way cooler, like a truss, but be much weaker, so modifying geometry/thickness may be necessary. I might still knurl the top anyway. But it would also provide even better handholds.

-Should I attempt to make the board split into two pieces, such that there would be four total? This would make it much weaker but would make much more space for my feet, as I'd be able to make it longer. It would mean that the project would be a bit more expensive, though. And if I did this, I assume I would need to beef up the overlapping interface (as I assume I will somehow have to do for the truck mount - board interface), and that may be more challenging in the center of the board.

I stole the trucks and wheels from my Pranayama Pantheon, which suddenly bit the dust 3 months after I rode over it with my car. They work well.

Let me know if you have suggestions or want to rag on my board. I'm all ears.

TLDR: Some mechanical engineering major likes longboarding and thinks he can make a better one, albeit a smaller one, than a CNC manufacturer can.


r/longboarding • • 6d ago

OC Action The Pantheon Banantheon is perfect 🤌

48 Upvotes

So fun for the skatepark, bowl and sliding. The only thing I would change is adding new school bolt holes(I had to drill my own) and widening the wheel wells a hair to accommodate for other tkp trucks). Otherwise the shape, length, width and construction are perfect. I love a good shovel tail shape.


r/longboarding • • 6d ago

Gear Show-Off Day of the dead short board

Thumbnail
gallery
53 Upvotes

I made this around 2015? The board is i think like 4-5 layers of 1/32 maple and one layer of baltic birch . Cotton fabric on each side and who knows how many ounces of epoxy. The bottom layer was made smooth using a mylar sheet as a release film , squeegeed out somewhat.
The grip was created using sand blaster abrasive. The rear being wider than the front creates this really fun whip effect by having so much more leverage while having stability in the front. Carves beautifully its maybe 24 inches.


r/longboarding • • 6d ago

Gear Show-Off My newest setup with I want to get into DH/Freeride.

Thumbnail
gallery
28 Upvotes

Hey everyone,

I’m planning to get more into downhill and freeride longboarding after 5 years normalish riding and wanted to share my current setup feel free to give some feedback. I’m not fully happy with the wheels yet.

Current setup:

Deck: Seismic Echelon 32"

Trucks: Seismic Aeon 155mm Solid Axle (45° nose , 30° tail)

Bushings: Seismic 94A both

Wheels: Fireball Tinder 70mm 81a

Bearings: Seismic Fullspin 6-Ball Steel XT Built-In

Extras: RipTide Slab footstop, Rocket Torque Block (goofy), Powell-Peralta Skull clear griptape

The trucks and deck feel solid so far, but the Tinders aren’t really doing it for me I want to use it for both DH and freeride for the start. Not sure if it’s the size, the 81a durometer, or just the wheel in general.

What would you change or upgrade first for downhill/freeride? Any wheel recommendations that work well with the Aeons? Also open to any other setup tips (bushings, angles, etc.).

Thanks for your time!


r/longboarding • • 7d ago

Gear Show-Off Wheel Dye Experiment

Thumbnail
gallery
55 Upvotes

I’m building a Nexus setup soon, and wanted my old karmas to look a little more presentable after turning a sad green from riding them over 500 miles. (The last photo is after I soaked and deep cleaned it with an electric scrubber 🥲)

I saw a few old posts on here talking about wheel dying, so I decided to give it a shot. I chose black because it felt like the color that could go the least wrong, and I didn’t feel like trying to color match the original karma color. I think they came out really well. And I also dyed some bushings because I like when bushings match wheel color!


r/longboarding • • 7d ago

Gear Show-Off Drop vs Flat Deck for DH

Post image
132 Upvotes

So I’ve lived my whole skateboarding life on drop decks…
28 years of drop deck boards happily so..
In my older days here locking into DH and of course, in that process built a more narrow, shorter, flat deck design with precision trucks, as one does..
Alongside that, I also have a pantheon Nexus with a similar truck and wheel set up..

I’m sure it’s just the years of muscle memory and continual drop deck riding … but
I feel super locked in and comfortable on my pantheon Nexus downhill whereas I have yet to inherently feel connected (locked into) to a flat deck board..
i’m sure this will come in time …. and I understand the mechanical leverage reasons and rotational mass reasons for going shorter and narrow with your board..

Question is I guess….
Are there high-level downhill riders that just stay with drop deck designs?
Is this preference ideologically unsound for advancing my riding ??
Should I set down the drop deck and Lock into the flat deck —- as that is where mechanical leverage over your wheels is at its highest..

Or is this preference acceptable? And a lot of riders prefer drop deck design.?

Sorry so long thanks in advance


r/longboarding • • 7d ago

Gear Show-Off Sector 9 Rayquaza custom I painted

Post image
78 Upvotes

I love this board, it's comfortable, smooth and bouncy. I got it free from a neighbor a few months back and thought it could use some color to cover up all the wear. I'm curious what others think about this board or brand?


r/longboarding • • 7d ago

OC Action Practice makes perfect

23 Upvotes

Not sure when I'm ever going to utilize them, but I'm getting better with my ollies. 🤷‍♂️

Tips, tricks, concerns?


r/longboarding • • 7d ago

OC Action yes, Nexus is a great deck for learning how to slide

134 Upvotes

I'm still learning.


r/longboarding • • 7d ago

Gear Show-Off End of Season Quiver

Post image
28 Upvotes

One of these boards is not like the others 🤡


r/longboarding • • 7d ago

OC Action Loaded Dervish Sama with Caguamas

Post image
15 Upvotes