r/lockpicking • • 2h ago

Challenge Pins by Dan Diggler

Thumbnail
gallery
17 Upvotes

Just got these in from u/DanDiggler213 . Looking forward to trying them out!


r/lockpicking • • 56m ago

Weekend with the Reaper 26

Post image
8 Upvotes

I've had the Reaper 26 set for a weekend and been quite impressed, specifically the tensioning tool additions.

I have the original set, which is better for open keyways with the thicker 20 thou stock and shorter stems, giving tons of feedback. Where the new ones (#6-18) shine are paracentric keyways with their thinner 18 and 16 thou stock. I found the #10 and #11 were real workhorses, doing very well on Abus, Yale and the like. The #8 (McTickler alt) and #9 (wavy, weird rake/zipper type) haven't gotten a lot of use as the original #2 McTickler is still the "if orange belt tumbler or under, this'll probably work in a few seconds" pick profile. The OG is still just that good. I think it is much better than the new ones and haven't gotten a lot out of them. But I'll keep trying until I find what their use case is.

The new TOK tensioners are nice, with a nice sway to gove tension behind the face of the lock, if set up correctly. They also can get tension on recessed locks like tulips and similar locks. The BOK tensioners are really the stars of the show. While the OG are stiffer and still great, these new ones are phenomenal. Outside of the Multipick SP 57. i could see these becoming my go-to BOK's. These do get tension force behind/level with the face, stay wonderfully out of the way to give good access to the keyway (sways down and to the side) and tapered and knurled TOK option on the other side. So plenty of angle options and all of the tensioners have pretty good feedback.

These are additions, not replacements to the OG Reaper set. Nothing becomes irrelevant when you get these, the OG stet still has tons of purpose. Just longer and thinner hooks that have more profiles (like smaller hook faces that can get into those hard work in locks).

The numbering system let's you put these picks in hook side down, snd takes all of a couple sessions to get so you can almost pull pick profiles and thicknesses you want by feel, since the case has a purpose-made spit for every tool.

The only issue I had was not making this a tri-fold option to protect the tools and keep the case shut. Or even a strap of buckled leather.

I get he wanted this to be easy to access and open like a book, but I can't comfortable put this in my pocket without feeling the exposed tensioners catch on the fabric.

The only downside of this set up that I could think of, otherwise this is a near-flawless set. And my obsessive ways makes me also wish I had one more tool that fit in the empty spot with the other nee TOK tensioners. There is a spot for an F-U or F-ME folding pick. Which would be best to have rakes set up in, since this set just has hooks and zippers, no rakes.

I'll update if I find good uses for the #8 and 9. Which I'm sure I will eventually.


r/lockpicking • • 10h ago

My homemade(from pen clips) tension wrench and rake

Post image
38 Upvotes

I can easily pick a master lock with these, haven't cracked brinks yet. Just thought I'd share


r/lockpicking • • 11h ago

Falcon Sfic core picked

29 Upvotes

Picked to control using the reaper 26 tensioner


r/lockpicking • • 5h ago

I’m in a slump I can’t break out of

10 Upvotes

Hey everyone, just looking for some advice on getting out of a picking slump.
For a while I was opening green belt locks pretty consistently, and it felt like I was finally getting the hang of things. Everything just seemed to click, and I felt like I had a really good feel for what was going on inside the locks.
Then one day, out of nowhere, it was like I completely lost my touch. Nothing felt right anymore, and I couldn’t seem to get anything to work like it used to.
It’s been about three weeks now, and I can still open my easier locks (white through orange) without much trouble, but I just can’t seem to get any of my green belt locks to pop anymore.
I even picked up some new hooks recently and have been messing around with those, hoping maybe switching things up would help, but I’m still having a rough time.
It’s just frustrating because I know I can open these locks. I’ve done it plenty of times before, but now it feels like I’m backtracking instead of improving.
Has anyone else gone through something like this? Did you take a break, switch things up, or just keep at it until you got your feel back?
Any advice would be appreciated!


r/lockpicking • • 1h ago

Hardened stainless steel disk lock

Thumbnail
gallery
4 Upvotes

I have this disk lock from my storage unit, I have been doing some lock-sport the past year or two and have been getting through some of the more challenging locks yet this one has Me at a standstill.

Currently using the reaper replacement tips for the gravity pick and made custom handles with JBweld, super cheap and handle well enough for where I'm at in it all, anyway!

I have been setting the pins or wafers at various tention levels and have been paying attention to which pins might be over-set reset, on and on and with many attempts [spent an hour or so] I came here to see if there was any advice or tips aiming for one who has picked this exact lock its gotta six cut key, thanks all!


r/lockpicking • • 18m ago

Waterbury US army lock

Thumbnail
gallery
3 Upvotes

I had this one for about 4 years and never been able to pick it. It's so hard to fit my pick inside ( .015 ) and I can only feel 1 pin binding.

I also feel 6 holes at the bottom of the keyway. I'm curious if anyone here has any experience with them


r/lockpicking • • 15h ago

Stuck in trap pins

45 Upvotes

Mila Evo, 2 days stuck in the trap pins 😫


r/lockpicking • • 9h ago

Shed some light on a tubular lock core?

Thumbnail
gallery
11 Upvotes

I seem to have done something funny to my tubular lock I picked up yesterday(chateau c480-s,brand new).
It is my first go at a tubular lock and I thought it was going suspiciously well as I was able to get it picked in almost no time.
After picking it like seven or eight times, a pin was stuck and wouldn’t budge after picking to half open(this lock needs picked twice to fully open as the pins all reengage at 1/8turn of the core, then to fully open at 1/4 turn). After messing with it bit I just decided to ignore stuck pin and pick around it and it went to full open, then picked twice again back to fully closed.

Hoping that had solved it, I tried the keys and they no longer work. What’s funny is that I can still pick it well enough and turn the core, but that does seem to engage the tailpiece or cam, they don’t move at all. I don’t understand how I can rotate the core without the tailpiece rotating.

Any insight as to how I goofed this is appreciated! I just want to understand its anatomy a bit better and I am planning on drilling the set pin so I can pull the core and gut it for science.


r/lockpicking • • 3h ago

Reaper 26 and which F pick?

3 Upvotes

I just got the new reaper set and another OG set to populate the empty slots with the sale. Additionally, I went with the F-U pick instead on the F-ME because the ME doesn't have any rakes and why have a bunch of duplicate reaper picks in the set. Anyone do the F-ME and have a good reason why? Just curious?

The case looks nice but closes a little tight with all the add-ons. I'm hoping it breaks in well.


r/lockpicking • • 22h ago

Got this master Lock pro series 6835

Thumbnail
gallery
47 Upvotes

Nice restricted keyway too


r/lockpicking • • 21h ago

Finally trying feeler gauge

Thumbnail
gallery
28 Upvotes

I’d made most of my picks out of drain snake metal so far. I like it, but it comes in about .036” and since I’ve been making more picks in .020” and under, the idea of spending hours and several sanding bands thinning material finally pushed me towards feeler gauge.

Since it’s also wider than the drain snake material i decided to take advantage of the extra material and see how wild i could get. Its not my best profile, another reaper #4 variant, and I still have a good amount of polishing to do but i definitely enjoyed the process and the steels seems to be working well so far.

Next up: will probably play around with making pick tips i can throw in my covert companion (OG) or try making my own folding pick set. More or less just wanna find ways to take advantage of having whole strips of steel that already comes in a consistent thickness without needing to be thinned down.


r/lockpicking • • 1d ago

My Lockpicking Progression (1 month)

Post image
46 Upvotes

After two straight days of fiddling with the American Lock 1100 I am now pretty confident picking serrated pins. The first two times I picked them I pretty much just hammered down on every binding pin and then when I tried to replicate it I could not pick it again. Today was my first day utilizing the “Jiggle Test” this for me personally required a much lighter touch than I am used to but I am glad I now understand this discipline. I have a 90a- Pro in the mail and will advanced to that soon.

Nothing cool to see here just wanted to share my progression, also thank you to everyone that has helped troubleshooting my issues along the way. 👌🏽


r/lockpicking • • 1d ago

I know this is a long shot but I don’t know where else to ask for help

Thumbnail
gallery
286 Upvotes

My father was a marine. He’s in his 70s and his memory is gone. I found this lock in his things and I’m wondering if this was from when he was in the marines. I know this is a lock picking sub but I thought you guys might also know the history of locks a little. The key reads “US property, do not duplicate”


r/lockpicking • • 1d ago

Latest Nemesis.

Post image
26 Upvotes

Just got this bad bitch in the mail, already kicking my ass but I'm loving every min of it!!


r/lockpicking • • 1d ago

Ace 5007601

Post image
35 Upvotes

This was a fun pick. Online it says four pins. On the package it says five. I picked it as five but the first pin was a maximum lift. I tried raking it but I haven’t learned the skill to rake good yet. Either way, I enjoyed and probably wouldn’t recommend for new people like myself since the tolerances are not great and not great feed back like the Ace 54541.


r/lockpicking • • 1d ago

Abus 80TI/40

Thumbnail
youtu.be
19 Upvotes

r/lockpicking • • 1d ago

My late entry to the Dual-Hand challenge: Lockwood 334B45

27 Upvotes

Definitely had to do a weird grip here in order to use the same turning tool for each hand, but I'm glad I managed it without a vice!

Awesome idea, thanks to u/PeatnRepeat for putting it on!


r/lockpicking • • 1d ago

my first disc detainer lock picked

Post image
76 Upvotes

also my first non pin tumbler lock open. this one took a while to get so I'm really stoked on it. and thanks to everyone who offered help and encouragement on my last post


r/lockpicking • • 1d ago

Alpha YKK

Post image
20 Upvotes

Opened another from yesterday’s package. This had ten pins, four left, four right and two on top. First open with my Moki AKAB set. This picked like a typical HPC. Little mush at first until I got a little core rotation, then up and down each side. When those had no binders, check the uppers. Left, right, and top each had a no-touch/no-budge pin. The final upper was nestled next to on, which made it a little hard to get on. Oddly, the first chamber was empty left and right. I think the only way to gut this is by ripping out the bible covers, which I am not in the mood for.


r/lockpicking • • 1d ago

Found

Post image
42 Upvotes

Was looking for a custom shallow hook I made. Found it in my wife’s felony box


r/lockpicking • • 1d ago

it's not in use, cat!

31 Upvotes

She didn't read the rules.


r/lockpicking • • 1d ago

Stuck and frustrated with a master lock #3... Newbie that needs assistance - I feel lost.

12 Upvotes

I have a master lock #three and when I apply tension, I can feel that the binding pin is number four. And when I lift it up, it clicks. But then when I'm working on finding the other binding pin, I can't feel the other pins binding. And not only that, but it also sounds like number four ends up dropping back down after some time. I've tried applying all the way up to heavy tension and it doesn't really seem like it makes a difference. There's a point where the pins get stuck and I can't move them. But then I use a little bit less tension, like just the tiniest amount less. And then I can set a pin or what feels like I'm setting a pin. But it always seems to drop back down while I'm working on the other pins, and I can't feel which other pin is binding. I probably shouldn't have skipped the see through lock...

I have another Master Lock 3 that is extremely easy to pick for me. I even found out that the binding order is four, three, two, one. And it seems to open most of the time that I try to pick it. So I can't tell if one is just considerably easy and one is just hard or stubborn, or if the problem is mainly me or just one of the locks. I'm completely lost.


r/lockpicking • • 1d ago

Panavise ball size

3 Upvotes

So, I have a panavise JR (250 kit) and am trying to put a small rig clamp on it as the vise jaws. I'm currently unable to measure the ball size and haven't found any information online other than Google ai saying it's a 1 inch ball (it's not). If anyone could get me the info that'd be much appreciated.