r/linuxfornoobs • • Feb 10 '26

Battery life help.

10 Upvotes

I need help on battery life. With windows my laptop gets around 90 minutes of battery (6 year old laptop). On linux, no matter the distro and installing battery optimizers, I get, if Im lucky - 10 minutes of battery life, and my laptop will run super hot.

My laptop is an Asus Zenbook 3 from 2019.

Can anyone help? Im nearly done and ready to switching entirely to linux. But this lack of battery life is killing me.. No pun intended.


r/linuxfornoobs • • Feb 19 '26

Switch to Linux?

8 Upvotes

Im currently on Win 11 but with Revision OS for performance and I want to switch to linux for the performance and aesthetics BUT for school I have to use Unity, and VS 2022 does Linux support them, also does linux support Assetto Corsa off steam bc I also gotta game.

If not are there any work around to supporting it? Virtual Machine (performance must be decent). And can someone give instructions Im new to linux. Also is it work the switch?

My Specs: I5-10210u, 8gb Ram, 256gb SSD, Intel UHD620 graphics.

Thanks!


r/linuxfornoobs • • Feb 21 '26

How can I get it to stop doing this?

7 Upvotes

This happens occasionally when I’m not doing anything. Doing this is the only way I can replicate this.


r/linuxfornoobs • • Aug 26 '26

is it over?

Post image
6 Upvotes

i just want to say that im in a fragile emotional state right now so please don't rub it in. i was trying to get bazzite on a new pure virgin ssd. i was following a tutorial and it was going great. the whole time wishing that my past self hadn't been so intimidated and had done this sooner. I was this freaking close and the final instal was loading and it was taking longer than i thought it should. So i thought maybe it's stuck and needs wifi, silly me for thinking to begin with. no thoughts needed when you have a tutorial! anyway i turned on wifi while it was installing, and i think that was my mistake, or maybe it was something else cause it didn't immediately do this, after like 2 or 3 minutes it just did this. I took like 10 minutes of headphones in the dark time before writing this to calm down. also this is not technically my monitor im not the one who gets to decide to take the plastic off yes it annoys me too.

is it over please help


r/linuxfornoobs • • Jun 15 '26

Windows to Linux

6 Upvotes

I'm an all time windows user (never used any other OS) nowadays I use my potato PC only for writing (mainly emails and word)

I'm assuming that some Linux are way lighter and works fine in old PCs. That's why I'm thinking of switching to Linux, because rn it lags and crashes so much. What'd you all recommend? I just want a smoother experience than that. In which I can write in peace. I genuinely don't use my PC for anything else

Specs- 4GB ram, Intel i3 6th gen, windows 10


r/linuxfornoobs • • Oct 07 '26

YouTube player with recommended section

5 Upvotes

I'm tired of using YouTubes website, as it keeps breaking my theme, moves random elements in its design and is just generally enshittifying itself. I've tried players like youtube-tui and FreeTube, however I would also like to have either the ability to login or to have a feed similar to the website, where you can find channels you aren't subscribed to. Any recommendations? If it's impossible, Why?


r/linuxfornoobs • • Apr 17 '26

Where do I even move ? Or Should I even move ? [Currently on Mint Cinnamon]

5 Upvotes

I made the switch from Windows to Linux earlier this year (around February), so I’m still pretty new to the whole ecosystem. But holy shit I've been missing out, I find my self more calmer with linux not playing Valorant or other Pvp toxic games xD OR not getting constantly asked to sign in to random shit or forced updates.

Right now I’m running Linux Mint Cinnamon (X11) on my desktop and Nobara KDE Plasma on my laptop. Mint has been really refreshing overall, but I’ve started to really enjoy the KDE experience on Nobara a lot more.

There’s something about Mint that I can’t quite put my finger on, but it does bother me. While it works great out of the box, I’ve run into issues when using certain art software or trying to run things through Bottles—it just doesn’t feel as reliable.

On top of that, Wayland support on Mint feels quite unstable at the moment. I know they’re working towards it, but right now it’s a bit of a mess. Even with gaming, I’ve noticed Mint struggles sometimes, whereas my lower-spec Nobara laptop performs surprisingly better.

I’m currently planning a new PC build with a Ryzen 7 7800X3D, RTX 5070 Ti, 32GB DDR5 RAM, and dual NVMe drives. My main use cases will be gaming, illustration work, and some 3d rendering / printing.

I prefer a snappy desktop environment and I’m not a big fan of GNOME, which is why KDE has been standing out to me lately.

For those with similar setups or workflows, what distros would you recommend that are solid for productivity, gaming, and creative work—and would make the most out of this kind of hardware?

UPDATE:

GUYS !! I LANDED......ON CACHY OS ! ITS SO GOOD HERE ! Thank you !


r/linuxfornoobs • • Mar 09 '26

Issue with Bottles?

5 Upvotes

Hi, I changed from windows to Mint on my roommates recommendation, it's OK, definitely a change, though. One problem is i want to run Clip studio, which for some bizarre reason relies on Microsoft edge for the asset store. I watched this video https://www.youtube.com/watch?v=5CPzvDQ1Nm4 since im EXTREMELY new to Linux. my problem is that it runs really slow on bottles and despite doing the "Use mouse mode in tablet driver setting & turn mouse warp on in bottles settings." (i dont know where that setting is in bottles, LOL) everything is extremely offset and has no line weight.

Side note, i have 3 monitors and mint sometimes scrambles them? like half of one monitor will appear on another monitor, is there something i can get to help that? rn i just do in and disable a monitor and re enable it and it... sometimes works. lol.

the annoying thing is that i want to "add desktop entry" but it just... doesn't work? I tried the Flatseal method and the terminal method shown here https://docs.usebottles.com/bottles/programs#flatpak which is super annoying since i dont want to go thru bottles every time.

Is there a better method for this? or other user-friendly linux platforms i could try?

also ffs clip studio find something other then fuckin microsoft edge i stg

Update: pen pressure works, still cant add desktop entry and also i now cannot click file edit etc....


r/linuxfornoobs • • Nov 14 '25

loving Fedora KDE Plasma

5 Upvotes

Years ago, I played around with lightweight distros like PeppermintOS and Linux Mint Xfce, usually dual-booted with whatever Windows version I was using back then. Never really committed though. (I'm pretty sure I also tried Ubuntu.)

For the past couple of weeks though, I've been distro-hopping and settled on three (very different?) ones: Fedora, CachyOS, and MX Linux. I liked the centered clock on GNOME, but I also knew I wanted to go either KDE Plasma or the upcoming Cosmic Desktop (but Pop OS doesn't really appeal to me).

I spent three days on the Fedora Cosmic Spin and really liked what worked, but it was also a bit confusing, so I started all over and went again with Fedora, this time in KDE Plasma. My plan was to stick with this until the December 11 launch of Cosmic Desktop.

But after a week, I think I'm very much happy with this. If it's easy to load the Cosmic Desktop, I'll still give that a try, but if not, I'm just sticking to KDE Plasma.

I'm still sorta dual-booting, but this time from two separate hard drives: I run Fedora from an external HDD I plug in via USB while Windows 11 remains on the internal drive. I sometimes wish I could just go with Fedora (or at least put Windows 11 on the external). Sadly, I can't do a clean install yet of my laptop, because I am still working to finish my PhD and can't risk losing my files.

But gosh...I wish I could just load into Linux without plugging in an external HDD while still having access to my data. I wish I could just get rid of Windows and leave the data intact!


r/linuxfornoobs • • Sep 13 '25

how Id solve a windows key problem ...

Post image
5 Upvotes

r/linuxfornoobs • • May 15 '25

Looking for a Linux Distro

5 Upvotes

SOLVED

  • Highly Customizable System

    • I want control over how your desktop looks and feels.

  • Gaming Support

    • Indie games + some AAA (games release in 2017 - 2020).

    • Steam + Proton/GE compatibility

    • Playnite/GOG Galaxy compatibility (via Wine or alternative like Lutris).

  • Java Programming Support

    • I really want it to run Java IDEs like IntelliJ IDE\ Net Beans smoothly.

  • Network and Hosting Hobby

    • I have a hobby to configure, admin and run Minecraft, XMPP, Website, Next Cloud servers.

    • Easy setup of VMs (VirtualBox, QEMU/KVM. Please recommend I have been using Windows Sandbox exclusively).

  • Productivity

    • I use alot of Word Processing software.

    • I don't mind WordPress but I use Microsoft Office at work.

  • Privacy-focused

    • I really value privacy (but I still want my system to function).

  • Hardware compatibility

    • I currently have a mobile intel laptop but I am look to upgrade to an AMD system later so support is a requirement for both drivers for the future.

  • Open to Learning but Not crazy on Terminal skills

    • As state I am willing to learn the terminal for the experience but I dislike overly relying on it for every little problem.


r/linuxfornoobs • • Oct 02 '26

How to enable Bluetooth BEFORE decryption?

4 Upvotes

On my Ubuntu 24.04, I enabled encryption during install so now my PC asks for decryption key whenever I reboot.

The problem is that when it does so, it doesn’t recognise Bluetooth and I have to grab a cable and connect my keyboard to use it to enter the password.

Is there anyway to have the Bluetooth stack be ready for use and connected to my keyboard at that stage?

This is tedious!


r/linuxfornoobs • • Aug 26 '26

My Journey With Linux (So Far)

4 Upvotes

I started learning Linux when I decided to pivot into cybersecurity. It’s been a rollercoaster—not only learning the operating system, how to navigate it, and how to troubleshoot it, but also how penetration testers and defenders use it. That being said, I am by no means a expert here to show off my rice and boast about my accomplishments. I’m just here to tell my story in hopes that it gives someone clarity on adopting Linux in their daily life.

The first Linux distro I ever installed was Ubuntu back in high school. Someone showed it to me, and I honestly thought it was like the Walmart version of Windows.

I’ve always been good with Windows. I helped my family and my friends' parents troubleshoot computer problems whenever they popped up—nothing advanced, just basic tech support.

In 2024, I decided I wanted to "break into cybersecurity." I started by watching videos on penetration testing and fell in love with the idea that I could legally do what my parents warned me to watch out for as a kid—and get paid for it. So I did what a lot of us here probably do: I signed up for Hack The Box and started the pentesting path. That meant my first real hands-on Linux distro was Parrot OS, which worked out well since that’s what HTB uses in their browser labs. The more I used it, the more comfortable I became.

Eventually, as I learned more about operating systems, I wanted to try something new. Naturally, I went to the next big pentesting distro: Kali Linux. To me, the two felt fairly similar. By this point, I was spinning up virtual machines and building my own home labs, so I wanted to dig deeper. I like building things from scratch because it feels truly mine, and I take a lot more pride in maintaining a system when I know every piece of it. Naturally, that led me to Arch—and sure enough, I learned a lot of things the hard way. However, Arch ultimately felt like a headache I didn't need. I found myself spending more time "ricing" than actually tailoring the system to support my studies. I also tried Red Hat, Mint, and a few others just to get a feel for different ecosystems.

Right now, I’m using Omarch, and I LOVE it. Getting used to a tiling window manager has made me drastically more productive once I learned the keybinds. I barely ever touch my mouse anymore unless I’m navigating a website.

I think a lot of beginners skip an important thought process before picking a distro. The whole "which distro is best" debate seems pretty silly to me. Instead, ask yourself: What will I actually be doing on this machine every day? Do a little research and find what fits your specific needs. You’ll learn so much more by picking one, sticking with it, and troubleshooting problems as they arise, rather than blindly following someone else's opinion about what worked for them.

TL;DR: I got into Linux to study cybersecurity, distro-hopping from Parrot OS and Kali to Arch before finally settling on Omarchy for the productivity of a tiling window manager. Don't get caught up in the "best distro" debate—pick an OS that fits your daily needs, stick with it, and learn by troubleshooting your own system.


r/linuxfornoobs • • Jul 16 '26

I built genie — type "/genie install teams for me" and it shows the real command, explains it, and runs it only when you say yes (open source, Linux + Windows)

4 Upvotes

Most beginners avoid the terminal because you can't remember commands you never

learned. Most tools fix that by hiding the terminal — genie does the opposite:

it shows you the command every single time, so you actually learn them.

$ /genie install teams for me

you said install teams for me

command paru -S teams-for-linux

meaning installs Microsoft Teams using paru (the package manager)

note this will change your system

run it? [Enter = yes · n = no · c = copy]

Safety, because AI + terminal is a scary combo:

- deletes use gio trash, not rm — I accidentally trashed my whole home folder

at 3am while testing and recovered everything, so, verified lol

- destructive commands (rm -rf, dd, mkfs) show a red warning and make you type "yes"

- rm -rf /, fork bombs, and writes to /dev/sdX are hard-blocked by a regex layer,

regardless of what the AI outputs

- the danger level is the stricter of the AI's rating and genie's own scan

The rest:

- detects your package manager at runtime: pacman/paru/yay, apt, dnf, zypper,

apk, xbps, emerge — plus native Windows 10/11 (PowerShell + winget)

- bring your own free AI key (Groq / Gemini / OpenRouter, or Ollama fully local),

with automatic retry + failover because free tiers are flaky

- common stuff (installs, updates, disk/RAM/wifi checks) works offline, no AI needed

- one Python file, zero dependencies, MIT

Transparency: I wrote the core logic and the safety engine; I used AI to speed up

UI scaffolding and docs. Tested hands-on on CachyOS, Ubuntu-family, and a

Windows 10 VM — other distros are unit-tested, and I'd love bug reports from

Fedora/openSUSE/Void folks especially.

Repo: https://github.com/wizard142/genie

Feedback very welcome — especially from anyone who remembers being scared of

the terminal.

All of my profiles and other stuff are in my linkedin page which you can check out if you want: https://www.linkedin.com/in/aibel-shibin-9a2a34420/


r/linuxfornoobs • • Jul 16 '26

Very noob question. How do I run a program?

4 Upvotes

Not new to Linux, just a pretty basic user for over 20 years, so embarrassed to ask this.

I recently installed a program, for EzGraver laser engraver, but can't get it to work. I'm using Kubuntu.

I can find the EzGraver folder in Home folder, I've tried a few commands I found online in Terminal (Konsole) but still can't get it to work.

What am I missing?


r/linuxfornoobs • • Mar 19 '26

Control One on Linux

4 Upvotes

I made the switch to Linux last month and it has been amazing! Everything has worked great and the experience has been great. The hardest part is when i need a program that only runs on windows. I have been using bottles with some decent success but i ran into an issue today with a program that for some reason no matter what i do, i can not get it to run. The application is call Control One. I was hopping other have made it work and can tell me what to do to get this to run. I am running Zorin (ubuntu based) I looked cool. I have other windows only apps running fine but this one has just been a pain! I even tried Claude to help me with no success.

I do not want to have to run a VM in microslop just to use this VPN... its annoying!


r/linuxfornoobs • • Mar 10 '26

Which very lightweight distro can I use on this very old tablet?

Thumbnail
reddit.com
4 Upvotes

r/linuxfornoobs • • Feb 18 '26

How to remove remaining steam folders?

4 Upvotes

Hi all, I'm trying to remove Steam and I ran sudo apt-get purge steam but I'm left with the following:

I was given the package configuration message that "purging is not entirely complete. Steam's working files are still located in your home directories at ~/.steam. If you intended to remove the entire application, you will need to remove those directories manually."

I tried running rm -rf ~/.local/share/Steam after that but I got a command line error that 'r' of '-rt' was not recognized. Any ideas for what to do?


r/linuxfornoobs • • Jan 24 '26

Help

4 Upvotes

I Am new and STILL stuck on how to install Linux on my technically dead PC. How do I do it? Board is an Asus p5p43td pro.


r/linuxfornoobs • • 9d ago

Help a noob setting up Swapfile within a Subvolume on BTRFS (MX Linux 25.3 (Debian) w/ XFCE)

3 Upvotes

For as long as a month I've had an issue with Suspend being whenever I wake up the PC, on a random basis, I only see the mouse cursor, the whole XFCE interface is gone. Only way to be able to use the computer again is either hard reboot or through the terminal restarting LightDM.

I don't have swap partition, no Swap space at all and I suspect its all because of that.

However, being a Linux noob, I'm not sure how I should proceed given I'm on a BTRFS based system, which seems swap is set up way differently than usual.

How should I go here?

I've tried one guide so far (https://wiki.crowncloud.net/?How_to_Add_Swap_Space_on_Debian_13) and it failed at the point where I do the "swapon" command (always gives Invalid argument in terminal)


r/linuxfornoobs • • 17d ago

fans stuck at 100 please help TwT

3 Upvotes

Anyone know how to reset fans on Fedora? I was messing with this (https://github.com/wiiznokes/fan-control) and now my room sounds like a datacenter

EDIT: Fixed it, DO NOT INSTALL THIS, IT BREAKS YOUR DEFAULT FAN CONFIG. Please install coolercontrol instead. I used it to fix the broken fan config.


r/linuxfornoobs • • Sep 24 '26

Webcam driver compilation for HP Chromebook AG 6 EE Touch running in Lubuntu

3 Upvotes

I have replaced Chrome OS with Lubuntu. and I need help for the camera driver. thanks in advance for anyone here could assist. my internal camera model is HP True vision HD Camera. if anyone here with same issue please assist me how did you sorted it out to get your camera work again with LINUX LUBUNTU


r/linuxfornoobs • • Aug 12 '26

Swap Memory getting swamped with basic Unity3D work

3 Upvotes

Hey everyone, this might be a specific scenario but I wanted to ask here anyway.

I installed Fedora 44 (KDE), I got UnityHUB, VSCode, Github Desktop, and I installed their .rpm (NOT the flatpaks in the discovery store). I'm definitely a noob and I don't know what flatpaks and rpms are specifically, though I kinda remember UnityHUB's flatpak unable to install any editor due to "lack of storage space" despite my SSD having more than 500gb left.

But that's beside the point.

At this point, I have Unity installed and cloned some of my projects I'm working on my main windows computer.

I've run into two issues on two projects:

1 - When I increase the folder size in the unity explorer to see the prefab icons, Swap memory in my OS goes crazy, until it crashes.

2 - When I try exporting a project, the small project works (I was able to export an android apk), but the large project (a native Linux build) will also crash immediately, once again, swap memory filling up.

-Additionally, shaders don't work the same on Linux, my large project is a bust even though I'm using basic standard built-in shaders.

Just as a reminder, none of these things are issues in Windows, what's more, it's not my code that's causing swap memory issues, since these are native unity processes, NOT the code I wrote lol.

I'm wondering, has any other unity dev on Linux had similar issues, or have been able to work with Unity flawlessly without issue? If so, what OS are you using, or how did you get around these issues?

For context, here's some of my specs.

I'm loving Fedora desktop (especially the way I have everything set up with KDE), but I'm not a big fan of things I would take for granted on windows seemingly being a bigger issue in Fedora. Shaders not working like they normally would is something I'd be willing to work around assuming it's purely a Unity thing, but most of these issues are definitely coupled with the OS, and I don't know if I should spend more time troubleshooting (where do I even start?) or just stick to windows for Unity development?

I don't want to ask AI, but I also don't know where to even begin looking into troubleshooting this (much less if the time would be worth the effort)


r/linuxfornoobs • • Jun 30 '26

This might get downvoted to hell too lmao

Post image
3 Upvotes

r/linuxfornoobs • • Jun 22 '26

When “Turn Off Intel RST” Doesn’t Mean Intel RST Is Actually On — My Linux Install Rabbit Hole Spoiler

3 Upvotes

I recently ran into an interesting problem while trying to give an older HP laptop a second life with Linux.

What should have been a simple wipe Windows → install Linux process turned into a good example of how modern “smart” hardware features can create unnecessary problems years later.

The laptop:

  • HP 15-da0xxx

  • Intel i3-8130U

  • 4 GB RAM

  • 1 TB Toshiba HDD

  • 16 GB Intel Optane Memory module

Nothing special. Just a basic machine that should be perfect for a lightweight Linux setup.

The goal was simple:

Remove Windows completely and install Linux.

Except Linux Mint immediately stopped me with:

“Turn Off Intel RST”

Linux Lite and Pop!_OS showed similar issues.

At first glance, this seemed obvious. The system must be running RAID/RST instead of AHCI.

Except it wasn’t.

I went into the BIOS and checked Intel Rapid Storage Technology.

Both drives showed:

Non-RAID.

The Toshiba hard drive specifically reported:

Controller Type: AHCI.

Exactly what Linux wants.

The confusing part?

HP provided no BIOS option to:

  • Disable RST

  • Disable Optane

  • Change RAID/AHCI mode

So Linux was telling me RST was enabled.

The BIOS was telling me AHCI was already enabled.

Someone was wrong.

I booted into the Linux Mint live environment to see what was actually happening.

Ran:

lsblk

Linux immediately detected the 1 TB Toshiba drive.

Then:

fdisk -l

Linux could read the drive and partition table without issue.

That was the clue.

If Linux can see the drive, read the drive, and interact with the drive, then the storage controller itself probably isn't the problem.

The installer warning was being triggered by something else.

The real issue was hiding in plain sight.

The laptop also had:

Intel MEMPEK1J016GAH

A 16 GB Intel Optane Memory module.

For anyone unfamiliar, Optane was Intel’s attempt to make slow mechanical hard drives feel faster by using a small high-speed cache drive.

Great idea in theory.

But it created another dependency layer between the operating system and hardware.

Even though the HDD itself was AHCI, the Optane hardware was still present.

My conclusion:

The Linux installer saw Optane hardware and assumed the system was still controlled by Intel RST.

It wasn’t detecting reality.

It was making an assumption.

The fix?

Open the laptop.

Remove the Intel Optane M.2 module.

Boot Linux installer again.

That’s it.

The RST warning disappeared instantly.

Linux Mint installed normally.

No BIOS changes.

No special commands.

No complicated workaround.

A tiny unused cache module was blocking an entire operating system installation.

The bigger lesson:

This is where I think modern tech keeps moving in the wrong direction.

Companies keep adding “smart” layers designed to hide complexity:

  • Storage acceleration

  • Vendor optimization tools

  • AI automation

  • Cloud-connected features

  • Proprietary management software

When everything works, it feels convenient.

When something breaks, troubleshooting becomes archaeology.

You aren’t fixing the actual problem anymore.

You are digging through layers of assumptions made by software.

The error message said:

“Turn off RST.”

The actual problem was:

“Remove abandoned Intel acceleration hardware that makes the installer think RST exists.”

Those are very different problems.

And this is becoming more common.

Technology is becoming easier to use but harder to understand.

The more companies hide what is happening underneath, the harder it becomes for users to control devices they already own.

Sometimes the problem isn't the computer.

Sometimes the problem is all the extra “help” added on top of it.