r/lightingdesign • • 5h ago

How To Why does my Encoder Bar disappear when in Specific worlds

3 Upvotes

As you can see in the Vid my encoders vanish when selecting world 4-6.

I can turn the fixtures on with Highlight, but I can't use [at] [at] to set them to full. Is the Programmer itself disabled for some reason?

onPC Version: 2.5.1.0


r/lightingdesign • • 1h ago

Design Advice for snow fall effect with pixel tape - ETC EOS

Thumbnail reddit.com
1 Upvotes

r/lightingdesign • • 9h ago

Design Crossposting this from r/stagelighting: hands driving a 2D fixture layout.

4 Upvotes

Sharing a 30s clip from an interactive test: depth-camera hand tracking → 2D fixture layout → DMX/Art-Net/sACN out. The PiP is the software preview syncing with the rig.

The latency is real — roughly 0.3s end-to-end, and most of it sits in the camera input, tracking, and coordinate processing, not in the DMX/Art-Net/sACN output. But what you actually see is the fixtures lagging behind the hand, so it reads as the software being slow to push output to the rig — which isn't where the delay is.

That's the part I keep going back and forth on: on a show, is ~0.3s in the sensing chain fatal for this kind of interaction, or is it something you'd just design around — cue timing, easing, prediction, or avoiding fast hand moves entirely?

For people who've done interactive / sensor-driven looks: where did your latency budget land, and what did you do to make it read as intentional rather than late?


r/lightingdesign • • 3h ago

Gear The weekly identify that light/no stupid question thread

1 Upvotes

Did you go to a concert or event and see a lighting effect you love but couldn't identify the gear? This is your weekly spot to post images and figure out what you saw, and ask basic questions you have. Any individual identify that ________ posts outside of this thread will be removed.


r/lightingdesign • • 22h ago

Gear Recommendations for LED Bars

Post image
10 Upvotes

I bought two Eurolite LED bars. Plan was to put them at the back of the stage in the corners mounted vertically. However the ones I have do not enable control of individual lights so cannot chase.

Are there any recommendations for ones that do?

For reference these were £110 each and I'd be keen to keep it under 200 -based in the UK for reference

Small.band doing pubs, bars, small venues. No LD or venue rigs available for most of it.

PFA, thanks!


r/lightingdesign • • 1d ago

We need help!

17 Upvotes

At my school we are running into an issue. I am a lighting technician at my school, and on our third electric we have two lights that are in a permanent state of a yellowish green on full power. we use an ETC ion xe20 and when the board is on they refuse to change colors. On top of that we cannot dim or turn them off. They are in this state when the board is off. When we attempted to unplug them, the entire electric lost power. we used black cloth to cover the lights during our performance but we know that cloth isn’t a permanent solution. Any ideas on what the issue could be or if it could be fixed? Thank you!


r/lightingdesign • • 22h ago

Gear recommendations for indoor raves?

2 Upvotes

I host small dj events in typically garages and basements, but have no lighting. i am looking to spend around 250-500 on a versatile but still powerful lighting setup. if anyone can give recommendations on the best value lights to buy from anywhere (amazon,temu,used) and what certant lights to look for, it would be appreciated. also if you have hazer and laser recommendations aswell!


r/lightingdesign • • 20h ago

workhorse moving head recommendations

1 Upvotes

i own two martin mac ones and two adj led beams

looking for my next moving heads that i can invest in in a quantity of 4 or 8 ... requirements:

- low maint and reputation for reliability
- ip67 rating
- bright, tight beams (i use a disco ball lots)
- ability to add custom gobos
- relatively lightweight (love the mac ones for this)

is there a product out there that fits the bill?


r/lightingdesign • • 21h ago

Control Help needed! Trying to change Gobo Select in EOS Augument3D

1 Upvotes

First time posting in this subreddit! But I desperately need help. I am a college student with a major in theatre, my concentration is in lighting design. Currently, I'm working on a project in Augument3D to design a light show.

Though I've got some decent work done so far, I am having trouble with trying to change the gobo selection on a group of SolaFrame fixtures. I have created a gobo wheel with custom gobos named "New Wheel (5)" within the patch tab.

Every attempt to change the fixtures from gobo wheel "HES Gobo Wheel 40" to my custom gobos "New Wheel (5)", it refuses and continues to stay as "HES Gobo Wheel 40". I would appreciate some help on how to navigate this issue in order to assign my fixture attributes to "New Wheel (5)". Any help is appreciated, thank you!


r/lightingdesign • • 22h ago

OnSong 2026 fixtures and gruppa disappearing

1 Upvotes

Hi everyone!

I’m using OnSong 2026 on an iPad with a DMXKing Art-Net interface and a dedicated router.

I had a fully working lighting setup with Cameo front lights, RGBW PAR side lights and Eurolite LED bars.

After reopening OnSong, some previously configured fixtures and groups were no longer visible as expected. Some lighting scene names were still present, but several settings and connections appeared to be missing.

Interestingly, the physical lights retained their previous lighting state even though the corresponding configuration was no longer visible.

I have .onsonglights backups from before the problem occurred.

Has anyone experienced fixtures, groups or lighting scenes apparently disappearing in OnSong?

Is this a known issue, and does anyone know how to prevent it?

Also, is there a safe way to inspect or verify an .onsonglights backup without overwriting the current configuration?

I’d really appreciate hearing from musicians who use OnSong for live DMX lighting.

Thanks!


r/lightingdesign • • 1d ago

Need help finding were to go after Sixth-form (Technical theatre)

4 Upvotes

Im in my final year of Sixth-form Technical Theatre, my main job roll is lighting.

I do not have a huge level of experience as its not an a-level course. But lighting and theatre has now become an amazing and fun experience that I want to continue into a career.

I live in Canterbury and finding somewhere for me to go after Sixth-form is proving difficult. I would like to stay as local as possible (financial reasons).

Going to college or Uni isn't impossible but I am unable a course that only does Technical theatre and not drama, dance and tec. I would prefer to stay away from Uni and College, but its still an option if its local and affordable (as cheap as possible).

So i am here to ask if anyone has any advice on what to do, whether I should go into further education or look into places that may accept me.

Even better if anyone knows anywhere that would take or train 18 yr olds around may/June. Please let me know.

Any kind of advice is helpful.

Thank you


r/lightingdesign • • 1d ago

What is a typical busking setup?

0 Upvotes

I work strictly in touchdesigner, I've been building my custom busking setups from the start, before i knew the term busking. Soo now I'm kinda wondering what do people actually do in consoles like MA or others??

What is a typical fader, button, or knobs setups, what parameters do you control? Real dmx parameters or virtual parameters?

Question is pretty open to whatever lights you want to use as example. Pars, moving heads, strobes, blinders, leds or whatever.


r/lightingdesign • • 2d ago

Software Layout Values for MA3

Thumbnail
badass.lighting
2 Upvotes

Released a new plugin on my new site...

The plugin displays fixture values in the custom text of it's layout element. I built it to display CTC cause that was a particularly frustrating point of friction in my workflow on set over the summer.

I've expanded it to display any parameters for the release version, curious to see if there may e other use cases beyond mine.

I also want to show off my site's new landing page so that's what's linked. (Scroll back to FOH and click on the console to enter)


r/lightingdesign • • 2d ago

Where to buy Chauvet DJ lights?

2 Upvotes

I'm looking for a reliable place to buy Chauvet DJ lights where I won't run into warranty problems down the road. I'm considering a couple of Intimidators and possibly a GigBAR, but a lot of marketplace listings seem to come from sellers without proper authorization. I'd rather buy directly from a **Chauvet DJ** authorized dealer than save a little money and risk having the warranty denied later. Has anyone bought from a store they've had a good experience with? Which retailers are actually authorized and reliable?


r/lightingdesign • • 3d ago

New hybrids are great on band nights and sit dark through our plays. What do yours actually do in straight theater?

Post image
46 Upvotes

I'm the ME at a 900 seat proscenium house. Touring music most weekends, three or four straight plays a year with a local company. This fall we finally got movers of our own, eight Betopper BSW500 hybrids on the over stage truss, and for concerts they've been a big upgrade over hoping the tour brings a floor package.

The plays are where I'm stuck. Our designer on the last show used them for exactly one cue, a slow blue backlight for a dream sequence, then parked them dark until curtain call. Felt like a waste of half the rig just hanging there.

Ideas so far: color backlight and top light, breakup gobos on the deck for the exterior scenes, maybe a couple as specials so we're not refocusing a Source 4 between acts. No haze for the plays, so beam stuff is mostly out.

If you're in a mixed use house, what do the movers actually do on a play night? And do your designers push back on using them, or are they the ones asking?


r/lightingdesign • • 3d ago

Jobs I'd love to chat with and maybe hire someone more knowledgeable that I am

Thumbnail reddit.com
2 Upvotes

r/lightingdesign • • 3d ago

Where to start for concert lighting?

4 Upvotes

Hello I'm currently in highschool and I'm looking into doing lighting design as a career. I am currently doing the lighting for my highschool's theater program and have a pretty basic understanding of the console. I've read a few posts suggesting getting some experience through working at local venues or seeing if you could shadow other people, the area I live in doesn't have and local venues nearby and I'm just not sure where to start if I want to learn concert lighting. Is there like a education program or course I could take? Or any other recommendations to get my foot in the door?


r/lightingdesign • • 3d ago

Settle a bar bet: what's the "right" way to order bows and lights?

Thumbnail reddit.com
4 Upvotes

r/lightingdesign • • 4d ago

New project in Wichita, KS

Thumbnail
gallery
54 Upvotes

The 2nd new club I have done lighting design and programming for within the last year. This is just a small preview..


r/lightingdesign • • 4d ago

MAC Viper cover fell off

1 Upvotes

Experienced a very strange equipment failure today. We had one of the head covers on an older Martin MAC Viper spontaneously fall off, scaring the sh*t out of everyone. The fixture wasn’t even moving at the moment.

Looking at it, it seems the plastic around the two captive screws that hold the cover on sheared off at the point the screw head lands on.

Has anyone else experienced this with these fixtures?


r/lightingdesign • • 5d ago

Capture light goes through fixtures

Thumbnail
gallery
6 Upvotes

Hello guys, in my show light from the spot goes through another. Does somebody know how to fix that?


r/lightingdesign • • 5d ago

Meta Weekly Self Promo Megathread

5 Upvotes

Have a new product that you'd like to promote and show off to the community? Here's your chance to do it. Every Wednesday, this megathread is here to gather new products, projects and anything else you might want to self promote. We want to encourage new ideas, but the influx of vibe coded, AI based posts means we needed a new home for these posts.

Note that we require developers to disclose where and how they used AI in their product and that r/lightingdesign has no ability to vet any projects or code that is used, so use/demo and sign up for these products with caution.


r/lightingdesign • • 4d ago

Large Seamless Overhead Silk Diffuser

2 Upvotes

Hivemind. I’m looking to source a manufacturer that can make a 24ft diameter overhead silk diffuser. Something that can have grommets and be rigged to a circular overhead truss. Rose brand seems to cap out at 16’ and would have seams. Any thoughts from the community at large?


r/lightingdesign • • 4d ago

Design Movable light source

0 Upvotes

Hi!

I’m looking for a portable and smallish light that is strong enough to cast shadows on semi transparent fabric through some haze.. where should I start??