r/lighters • • 2h ago

Show&Tell Maruman GL-67, aka "Baroque"

Thumbnail
gallery
14 Upvotes

I got this lighter today. It was kinda grail for me, when it comes to Japanese butane lighters of the 70's and 80's.

When I bought an IM Corona Old Boy, I also wanted one of these for comparison.

Here's my Old Boy:
https://www.reddit.com/r/lighters/comments/1x7en3k/im_corona_old_boy_and_im_not_even_a_pipe_smoker/

Prices are high for both. So I waited until something acceptable showed up. It was this one. I paid 40€ + shipping. Consider the condition with box and manual, I did good, I think.

It had a clogged adjustment sponge, but was quickly disassembled. However, removing the foam required some knowledge. So I watched some YouTube videos. While doing so, I realized, that the GL-57 isn't the pipe lighter version, but rather the predecessor of the GL-67, where the filler valve and the adjustment screw are separate parts instead of one unit. Instead, both exist as pipe and cigarette lighters.

Since the sponge is covered by a small metal disc, it's not possible to pull it out from the bottom. I had to push it from the top through a tiny hole, after removing the flame valve. A piece of high e string from an electric guitar did the trick. After some cleaning, a new sponge and oiling the old gaskets, it works now. The two bits in the last pic came also handy.

One note, filling it up with the adapter is so noisless, almost like it doesn't get any butane, but it works.

And how is it? Does it live up to the hype?

Well, it's simple to service, the design is not a copy of another design. It's a liftarm but unlike any other, especially in 1969, when they came out. The Old Boy looks like a ever so slightly redesigned Dunhill Unique.

Have you seen that roller bearing in the liftarm? That's insane, look again.

In direct comparison to the Old Boy, the latter wins, slightly. It's taller, so better to handle for me.

I also don't know what metal was used. It's some cast metal, but I don't know what type. But looking on the internet, they seem to hold up well. I didn't see broken parts yet.

They came in several finishes. While I thought, that mine was silver plated and developed a patina, it's actually faux patina. If I could pick one version, I'd probably choose a simple chrome plated over faux patina.

Also the tank, made from brass, doesn't seem to prone to cracking, unlike, what I've heard about the Old boy, when you drop it. But it's also smaller.

The Old Boy also has manufacturer support, while Maruman stopped making lighters long ago.

So, both have some ups and downs, but none of them is bad.

The Old Boy is like a thinking man's alternative to the Dunhill Unique, while the Baroque is truly unique.

But if you collect lighters, for the sake of it, you should probably buy both.


r/lighters • • 6h ago

HANDMADE BIC LIGHTER SLEEVES

Thumbnail
gallery
13 Upvotes

Hey everyone, I’m trying to reach a bigger audience with these handmade Bic lighter sleeves I’ve been making.

Handmade using Sculpey polymer clay and finished with two coats of Sculpey gloss glaze.

I take my time with each one, making sure it’s properly finished and up to my standards before putting it up for sale. Being handmade, some may have minor imperfections such as fingerprints, irregular shapes, a seal that’s too tight, or not always standing upright. I do my best to screen for these before selling.

I’ve got a few available and figured I’d share them here. Feel free to reach out if anyone’s interested.

Appreciate you taking a look!

(P.S. If sold, I can always remake.)


r/lighters • • 3h ago

My newest addition..

Thumbnail gallery
6 Upvotes

r/lighters • • 4h ago

Is there anything valuable here?

Thumbnail
gallery
6 Upvotes

r/lighters • • 1h ago

Tiffany and Company Thorens Swiss Green Onyx Antique Lighter

Thumbnail
gallery
2 Upvotes

r/lighters • • 2h ago

Made In Japan Lighter KW style? Lighter

Thumbnail gallery
2 Upvotes

r/lighters • • 7m ago

Collection My non zippos

Post image
1 Upvotes

r/lighters • • 15m ago

costumizable lighter as a gift

1 Upvotes

I want to gift my gf a lighter with the image of Gustav Klint’s “The Kiss”. Does anyone know a good shop in Europe that ships customizable lighters and/or BIC lighter cases to Switzerland or Europe im general? thanks


r/lighters • • 43m ago

Dunhill & Ronson Lighters

Thumbnail
gallery
1 Upvotes

My girlfriend and I went to an antique store today and picked up these vintage Dunhill and Ronson lighters. Does anyone have any information on either of them?

Neither is currently working. I’m planning to pick up some lighter fluid and flints, and possibly new wicks and cotton. From what I’ve been reading, it sounds like I should try the existing wicks before replacing anything.

The striking wheels are a little corroded, but I guess that’s to be expected given their age. Any advice on getting these working again or additional information on the lighters would be appreciated!


r/lighters • • 1h ago

Help How do I fix the hinge on my lighter?

Post image
1 Upvotes

I dropped my lighter, a knockoff DuPont Sleeping Mermaid, while it was open and now the top doesn’t close the entire way anymore. Is there a way to fix this myself? Take the hinge pin out and do something? I don’t think the gap will bother me that much but it doesn’t make a pleasant sound whenever I close it anymore.


r/lighters • • 2h ago

Help Advice on Arirang Flint (zippo copy)

1 Upvotes

This lighter has all the same mechanical parts as a zippo but is not a zippo and doesnt use the same sized parts. Need advice


r/lighters • • 13h ago

Help Lighter leaking butane issue

Thumbnail
gallery
4 Upvotes

Just received this heirloom. I'll fill it with butane and after 20 minutes, it's empty. Does anyone know what to fix here?


r/lighters • • 1d ago

Vintage/classic cigarette case pocket lighter

85 Upvotes

Bought this years ago on a roadtrip from an antique store for about $20, only just decided to try get it working. Pretty sure it's a petrol lighter and not a butane chamber - wick, flint, cotton inside. Still sparking 🙏


r/lighters • • 12h ago

My Zippo almost never lights.

Post image
2 Upvotes

r/lighters • • 9h ago

IMCO Triplex 6700

Post image
1 Upvotes

Hello. My IMCO Triplex 6700 lighter stopped producing a spark; when I checked the flint, this part fell out. Where does it belong, and can it be replaced? Currently, the spark is intermittent—sometimes it’s there, sometimes it’s not.
Thickness 0.3, inner diameter approximately 5.70, outer diameter approximately 9


r/lighters • • 19h ago

Help Help fully identifing and fixing a old lighter.

Thumbnail
gallery
5 Upvotes

I picked this up a thrift store not to long ago. I cleaned it up and put fresh flint and lighter fluid, but it doesn't like to light often at all, not even spark doesn't matter how hard you press it or at what angle, I wish I can post a video but can't do that and photos. I'll be happy to answer any questions.

It seems to be roughly from the 1960s but no date to be seen, might be under the sticker. And is by Frank Schirman, made of coral.

If anyone can give any advice on fixing the lighting mechanism or a drop in replacement. That would be very appreciated.

I hope you guys like this thing as much as I do.


r/lighters • • 1d ago

ID Any information on this please

Thumbnail
gallery
31 Upvotes

r/lighters • • 19h ago

Help My mom gave this lighter to her aunt many years ago. We have it back now after her aunt passed. We don’t know how to fill it, or what with, can anyone help?

Thumbnail
gallery
2 Upvotes

r/lighters • • 17h ago

Having trouble refilling my new Zippo yellow-flame butane pipe insert

Thumbnail reddit.com
1 Upvotes

r/lighters • • 1d ago

Handmade silver and opal lighter

Thumbnail
gallery
8 Upvotes

I've been busy recently so haven't had chance to make one for a while. I'd just finished making a really sparkly necklace that felt like it took forever to make and I fancied a new lighter, so I made one! I think this is my new favourite. Don't ask me why I decided to put a ring on it cause I don't know, it's really useful to carry though if you've got your hands full!


r/lighters • • 1d ago

ID Smoke*Ring flip lighter

Thumbnail
gallery
25 Upvotes

What do I have here? I can’t find much info other than some eBay listings, I’d like to use it, but zippo flints don’t seem to work/are too small and pushed down instead of sparking, any ideas? All information is appreciated.


r/lighters • • 1d ago

Show&Tell Brand new main spring

32 Upvotes

I got this thorens fab suisse brevete S.G.D.G double claw for 100 bucks it only needed a main spring. Anything cool I should know about it


r/lighters • • 1d ago

Duo

Post image
8 Upvotes

r/lighters • • 2d ago

n-Butane Caution

Post image
13 Upvotes

Fill gas lighters with isobutane (molecule pictured) or propane-blended gas; n-butane (which is practically the only gas in most butane cans) will cause the flame to be quite smaller as the vapour pressure is much lower than designed for most lighters. Because of this many think the lighter is getting worse with time as the factory fill is diluted and will start to mess with the internals, destroying it in the process. Most lighters are still usable with an n-butane fill but the flame will never be as large as usual with the gas if it is a non-adjustable design; refilling with isobutane in such a case would restore performance to like-new.