r/led • • 13h ago

Power Supplies Heating up or Burning Out

0 Upvotes

I have set up under cabinet lights in my kitchen using LED strips. I've had a number of power supplies burn out and have to keep replacing them. I tried using some old laptop power supplies but they seem to run very hot. The lights run on a TS0501B zigbee controller so I can adjust the brightness. I have had this set up for years and have gone trough 5 or 6 power supplies.

The current power supply is from an old Toshiba laptop providing 15.5 VDC but I keep the LED output to less than 12 volts.

Any thoughts on why the power supplies are failing / heating up so much? Recommendations on a low priced power supply that I could use?

Lights are LED 5050 SMD Strip 12V DC https://www.ledlightinghut.com/smd5050-flex-led-strip-30.html

Controller is a TS0501B (discontinued?) https://zigbee.blakadder.com/Tuya_TS0501B.html

Power brick is a Toshiba (laptop) PA3516U-1ACA 19V DC


r/led • • 17h ago

Compatibility between superbright connector + Pautix strip?

1 Upvotes

I'm looking at this Clamp-On 'L' / 'T' Connector for 10mm Tunable White COB Strips:

https://www.superbrightleds.com/l-t-connector-10mm-tunable-white-rgb-cob-led-strip-light

The strip I have is from Pautix: https://pautix.com/collections/cct-only-strip/products/b0c594n48p

It looks like it would work, but has anyone here actually done this and confirm that the connector lines up with the Pautix contacts properly?


r/led • • 21h ago

Question: Could anyone recommend a simple RF remote that can learn signals? I have a handful of LED light kits that use RF remotes, but I only use 1 button on each. I want to get rid of the clutter and only have one remote. I am unsure if this is the correct sub to ask this. Thank you

2 Upvotes

r/led • • 21h ago

LED RGB STRIP [first time]

Post image
1 Upvotes

Hey all. So if you look at my image. (and yes I'm a nerd)
I cut 2 (12cm/4.72inch) pieces of wood and spray painted them black. Now I'm going to double sided tape these 2 pieces of wood to act as a base for an LED strip and also to keep the statues I'm puting on a bit more fixed.

MAIN QUESTION:

Is it possible to put a 12cm/4.72inch piece of rgb led smart strip on there ? Because I've never messed about with LED RGB strips.

And if so.... HOW ? Do I just cut 12cm off of the strip ? Or ? THANK YOU !


r/led • • 21h ago

Anyone build rope lights using WLED and Seed Pixels?

Thumbnail reddit.com
1 Upvotes

Am I missing anything?

# Custom Modular 18-ft WLED Rope Lights — Bill of Materials (BOM)

**Project Overview:**

* **Scale:** 5 Columns, 2 modular 18-ft ropes per column (10 ropes / 180 ft total)

* **Design:** 12V WS2811 seed pixels pulled through 1/2" ID clear vinyl tubing with 3-pin xConnect screw ends so ropes can be run either **in parallel** (2 per column, e.g., double-helix) or **chained end-to-end** (36-ft single run with plug-and-play power injection).

* **Control:** 1 dual-output WLED controller per column (synced via WLED UDP Sync / DDP).

---

### 1. LEDs & Tubing (10 × 18-ft Ropes)

* **12V WS2811 Seed Pixels (Clear Wire, 3-Pin)**

* *If building 2.5 cm (~1") pitch (~220 px/rope, 2,200 px total):* **2× 1,000-ct rolls + 2× 200-ct strands** *(200 spare)*

* *If building 5 cm (~2") pitch (~110 px/rope, 1,100 px total):* **1× 1,000-ct roll + 1× 200-ct strand** *(100 spare)*

* **Clear Flexible Vinyl Tubing:** **200 ft** of **1/2" ID × 5/8" OD** (or 1/2" ID × 3/4" OD) UV-resistant PVC *(10 × 18-ft cuts + 20 ft spare)*

---

### 2. Controllers, Power & Enclosures (5 Column Boxes)

* **WLED Controllers:** **5×** Gledopto GL-C-016WL-D *(ESP32, 12V–24V, dual data outputs)*

* **12V IP67 Waterproof Power Supplies:** **5×** **12V 8.5A (100W)** for 2.5 cm pitch *(or **12V 5A (60W)** if using 5 cm pitch)*

* **Weatherproof Junction Boxes:** **5×** IP65/IP66 hinged ABS enclosures *(~6"×4"×3" or 8"×6"×4")*

* **Waterproof Cable Glands (PG9 / PG11):** **15–20×** *(3–4 per box for AC in + xConnect leads out)*

* **Inline Blade Fuse Holders + 5A Fuses:** **15×** *(16–18 AWG waterproof holders; 2 rope outputs + 1 injection lead per box)*

* **Wago 221 Lever Nuts:** **1 assortment pack (~25 pcs)** of 3-port (`221-413`) & 5-port (`221-415`) for `+12V` and `GND` distribution

* **Outdoor AC Power Cords (SJTW):** **5×** *(1 per column box)*

---

### 3. Waterproof Connectors & Power Injection

* **Female 3-Pin xConnect Pigtails (18 AWG):** **25×** *(2 per controller box + 1 per rope output end + 5 spares)*

* **Male 3-Pin xConnect Pigtails (18 AWG):** **20×** *(1 per rope input end + 1 per injection lead + 5 spares)*

* **xConnect Waterproof Screw End Caps:** **15×** *(to seal the unused top Male connector on each column + 5 spares)*

* **3-3-3 xConnect Power Injection T-Splitters:** **5×** *(1 per column; used between Rope 1 & Rope 2 when chained end-to-end at 2.5 cm pitch)*

* **18/2 Low-Voltage Outdoor Wire:** **100 ft spool** *(for 5 × ~19-ft `+12V`/`GND`-only power injection jumpers up to the T-splitters)*

---

### 4. Sealing, Soldering & Pulling Consumables

* **3/4" (19mm) Adhesive-Lined Marine Heat Shrink (3:1):** **1 roll / pack** *(~3–4 ft total needed to seal pigtail-to-vinyl tube ends)*

* **22–18 AWG Waterproof Solder Seal Wire Connectors:** **100-pack** *(~60–75 splices needed)*

* **100% Neutral-Cure Clear Silicone Sealant:** **1 tube** *(must be oxime/neutral-cure—avoid acidic acetoxy silicone so copper doesn't corrode)*

* **Pull String & Silicone Spray:** **1 each** *(mason's twine/fish tape + dry silicone lube for pulling pixels through the 18-ft tubes)*

* **UV-Resistant Zip Ties / Clear Mounting Clips:** **100-pack**

---

### Quick Wiring & Build Notes

  1. **Verify Pinout First:** Always check `+12V`, `DATA`, and `GND` with a multimeter in continuity mode before powering on—wire markings on seed pixel rolls vary by batch.

  2. **Power Injection Safety:** On the injection leg going into the 3-3-3 T-splitter, connect **only `+12V` and `GND`** (leave the center `DATA` pin disconnected), and always feed it from the **same** 12V power supply running that column's controller.

  3. **Test Before Sealing:** Power up and test every rope on the bench with WLED before applying neutral-cure silicone and shrinking the 3/4" marine heat shrink over the tubing ends.


r/led • • 1d ago

Looking to replace a bunch of LEDs in my boat.

Thumbnail
gallery
2 Upvotes

Can anyone help me identify these lights and find suitable alternatives?

I’m looking to replace the existing lights in my boat with LED RGB alternatives.

Information I have:
- Maximum 10W per light.
- The round LED circuit board is from a company called Båtsystem.com. I’m not sure if it’s specifically designed for marine use or if it has any additional protection against humidity and moisture.

Requirements:
- Must run on 12V DC, as my boat has a 12V electrical system.
- Must be LED.
- Preferably RGB or at least blue light.
- The round circuit board replacement must be dimmable. - The other lights don’t need to be dimmable.
- Maximum 10W per light.

I’m not sure what types of bulbs or fittings all of these are, and I’ve struggled to identify some myself.

Can anyone help me identify these lights and figure out whether RGB LED replacements are available? If so, which types or specific products would you recommend?
I’ve attached pictures of the different lights.

Edit: I found a replacement on AliExpress (see picture), does this work as an replacmenet for the circular from batsystem.com?

Sorry if i lack giving information or specs, this is my forst time on this sub and i have zero clue with leds.

Thanks!


r/led • • 2d ago

Trying to bypass controller on this star.

Post image
4 Upvotes

I would like to bypass the controller on this LED star and just have constant on. When I check the output from controller with a multimeter it shows 60V AC. Is there a trick for me to accomplish this without using the controller? I’m assuming if I wired it directly to 120 it will burn up the LEDs.


r/led • • 2d ago

Lighting designers: Would you choose 4 × 10W or 6–8 × 5W LED downlights for a 200 sq ft bedroom?

Thumbnail reddit.com
1 Upvotes

r/led • • 2d ago

Looking to make an LED accented gift and definitely in need of direction.

2 Upvotes

Hey all. I'm looking to make my mom something for Christmas and want to add in some LEDs for effect. A soft natural light and a more soft blue (it's for the interior of a castle and a snowlit scene around it.) I have tons of experience soldering and crafting, so I'm not worried on that end. What I don't know is what components I would need to make something like this that would be reliable and not overly bright that ruin the effect. It would be snow globe sized and battery powered (AA or AAA doesn't really matter)

So basically, what type of LEDs etc should I be looking for? I'm sure I'll need resistors of some type, I just never really dabbled much into the theoretical side of electronics, just the hands on bit.

TIA


r/led • • 2d ago

Lots of posts concerning outdoors + XMAS setups. So a YT product review from Chris Maher could help, if someone does a search in the sub.

6 Upvotes

Link to the video from Chris Maher here: https://www.youtube.com/watch?v=Lc11bmjXW30

Adding some keywords to help the search engine and some context.

This is better than Govee as ASAHOM Glow uses an ESP32 and a fork of open source software WLED for digital control, and thus compatible with a host of other software solutions, like Home Assistant, XLights, LedFX. Whereas Govee uses a proprietary hardware approach.

ASAHOM Installation Knowledge Base: https://www.asahom.com/pages/knowledge-base

PermTrack Kits (hide ugly wires): https://permtrackusa.com/

r/WLED is a dedicated Reddit sub for all things & projects WLED related. I've posted many projects there myself.

WLED knowledge base: https://kno.wled.ge/

WLED compatible controllers list: https://kno.wled.ge/basics/compatible-controllers/

WLED compatible LED strips: https://kno.wled.ge/basics/compatible-led-strips/

WLED gifs of their different effects you can use, kinda like a preview: https://kno.wled.ge/features/effects

So before investing in regular analog strips, look into the world of digital addressable LEDs, I mostly shop on AliExpress, and there you can get SEED or FAIRY pixels that are drop dead gorgeous to look at and are IP67 rated.

Then a 5$ esp32 super mini and some soldering, lots of hotglue and an IP67 PSU, boom you can Wifi a tree outside with seed pixels and use it year-round. Make a 2D grid and scroll text on it. Imagine a tree-sized "countdown to XMAS". Well, I can... ;)

Mods hopefully you'll allow this post, I find it contributes to the spirit of Reddit. I only refer to commercial products as for beginners it makes the most sense. Don't spend 1k$ on Govee and be locked into proprietary hardware. Embrace a company that supports Open Source with a commercial and UL approved product.


r/led • • 2d ago

Is this kind of LED lighting feasible?

Post image
1 Upvotes

Planning to DIY for basement home Theatre. Ceiling area is about 10x10’

There is an existing light fixture just past the two vents, closer to the centre of the ceiling. I plan to get rid of that existing light fixture and wire COB LED strips so that I can have the LED lights controlled by the existing light switch.

The black area is supposed to be acoustic foam.

My plan is to have perimeter of the area with LED strips, at the very least, but wondering if this is at all feasible and/or what considerations I need to take for something like this?


r/led • • 2d ago

Best way to upgrade a 1x4 recessed fluorescent troffer in a drywall ceiling to a flat LED panel? (Lithonia CPXR 1x4?) https://encrypted-tbn2.gstatic.com/shopping?q=tbn:ANd9GcQbX6eMslHD4DS1ENvgQnc1dIj0803lUTNpaWiCbArWEG6lOozR1aIbXLuAYonij2ExqBtYcO_cIn5w5nYdRgXl35Zr2W4nCtf8sGWtvQWqo9E5Z8-SZfx49g

2 Upvotes

I have an existing 1' x 4' recessed two-tube fluorescent light mounted flush in a drywall ("hard lid") ceiling, and I want to upgrade it to a modern flat LED panel without having to tear out the metal housing or patch drywall. (Photos of the open housing and ceiling attached.)
I came across the Lithonia Lighting CPXR 1X4 ALO7 SWW7 M4 LED Flat Panel Retrofit Kit, which is designed to install from below into existing troffer housings. However, the spec sheet mentions the standard kit is meant for T-grid drop ceilings and requires optional mounting brackets for drywall/hard-lid ceilings.
For anyone who has retrofitted a 1x4 drywall troffer:
1. Has anyone used the Lithonia CPXR 1X4 in a drywall ceiling, and do you happen to know the exact part number for the hard-lid/drywall mounting brackets?
2. Is there a more consumer-friendly 1x4 flat panel retrofit kit (available on Amazon, Home Depot, or Lowe's) that fits a drywall-mounted troffer easily?
3. Or am I better off just keeping the existing lens/frame and swapping in Type B (ballast-bypass) LED tubes?
Any advice or model recommendations would be appreciated!


r/led • • 2d ago

Is WAC Leo LED tape an active product?

1 Upvotes

Trying to find a retailer that carries the Leo line of SMD LED tape, but all I have found are the Pro and Gemini, which are COB. Looking for confirmation Leo is still active.

https://waclighting.com/product/leo/


r/led • • 2d ago

Manual LED Strip controller

Thumbnail reddit.com
1 Upvotes

r/led • • 2d ago

How do I power under cabinet COB LEDs without a delay to turn on after flipping the switch?

Thumbnail reddit.com
1 Upvotes

r/led • • 3d ago

Hi. What is the safe and brightest voltage rate for these f3 and f5 leds?

Post image
1 Upvotes

I asked ai about this it tells me its right at 3 volts but i tested and they are very dim at 3 volts (warm white). They are bright around 3.4-3.6 volts but idk if that is a safe rate for these.


r/led • • 3d ago

LED strip lights for permanent outdoor use

Thumbnail reddit.com
1 Upvotes

I am looking at LED strip lights and I don't want to buy the wrong thing.

I want to run the lights around the perimeter of my home, but be able to make them all different colors like Christmas lights, but also have the ability to set something like 10' one color, then 5' another, and repeat that pattern.

Maybe a "chase" feature where one light goes from one end to the other.

I bought a few sets so far and they don't do what they advertise, so if anyone knows exactly what terms I should look for, I would appreciate it


r/led • • 3d ago

LED strip lights for permanent outdoor use

1 Upvotes

I am looking at LED strip lights and I don't want to buy the wrong thing.

I want to run the lights around the perimeter of my home, but be able to make them all different colors like Christmas lights, but also have the ability to set something like 10' one color, then 5' another, and repeat that pattern.

Maybe a "chase" feature where one light goes from one end to the other.

I bought a few sets so far and they don't do what they advertise, so if anyone knows exactly what terms I should look for, I would appreciate it


r/led • • 3d ago

Help for Kitchen LED undercabinet - how to design?

3 Upvotes

Looking for some help on how to build out the right products for a kitchen under cabinet lighting set up.

I really would like for Home Assistant control -- LOCAL control, not cloud. Ability to change colors would be cool, but not necessarily required.

What sort of LED strips and driver would you all steer me towards? Its a mid-size kitchen. I roughly calculate I would need about 170" total of undercabinet width to fill if that helps.

Any websites or guides?


r/led • • 3d ago

USB 5v 1M 2835 LED Strip One Light Out

1 Upvotes

I been using the 2835 LED strips for some light box projects. A few recent ones I got in the first led does not work or the light itself is chipped off. The rest of the strip works fine, the light that is out doesn’t seem to even flash it’s just out. Is it safe to use the strip with the first light out (or missing) or should it just be tossed?


r/led • • 4d ago

Hel with finding the right connector for a led lamp

Thumbnail
gallery
7 Upvotes

I searched everywhere but I can't find the answer and I'm kinda a noob.

I bought two lamps (DC12v 12w cabinet led lamps with 2pin Dupont wire) to light up the inside of my wardrobe but didn't notice it didn't come with a power supply. So then I try to buy one online. I searched for "2pin dupont hub" with a power supply.

It was hard to find anything but eventually I got "LED Power Supply kit 15W with 6-point splitter power cable", it looks the same to me except the indent is on the other side so I can't plug it in.

My question is: are they genuinely a different thing? Will something happen if I chip off that part and plug it in?


r/led • • 3d ago

Just got new lights. Can i cut them, and if yes, where?

Post image
0 Upvotes

I got these lights for my birthday, but they’re way too long. The model name is TY-TZ-002, don’t know where they were bought though. These dark spots (next to the reflection from my lamp) look like places to cut them, but I’d like to make sure as I couldn’t find anything. Also, maybe a stupid question, but can I do something with the rest of the strip if I cut it?


r/led • • 3d ago

Suche ein LED Streifen für mein Fernseher

1 Upvotes

Ich suche einen günstigen COB-LED-Streifen für hinter meinen Fernseher.
Wichtig wäre mir, dass er:
unabhängig vom Fernseher funktioniert (mit eigenem Netzteil).
auch bei ausgeschaltetem Fernseher eingeschaltet bleiben kann.
mit Amazon Alexa kompatibel ist.
eine gute Qualität hat und möglichst lange hält.
verschiedene Farben und Lichteffekte bietet.
Habt ihr Empfehlungen für ein gutes, aber günstiges Modell? 😊


r/led • • 3d ago

Slow motion video of my gym

0 Upvotes

120 times a second this is what we don’t perceive with our seven cones in our human eyes. Your weed will not grow in it. It’s bad for your cognitive mental frequency, man.