r/lasers • • 17h ago

Good, high powered laser with a beam that looks like a lightsaber under 200

Thumbnail reddit.com
0 Upvotes

r/lasers • • 19h ago

Undergraduate project: measuring laser beam waists using the knife-edge method

Thumbnail
reddit.com
3 Upvotes

r/lasers • • 1d ago

Best laser for stripping white water based paint off of wood?

0 Upvotes

I bought a historic mansion with miles of mahogany trim that’s been painted shite, I mean white, and it’s testing positive for lead so I dread spending weeks and weeks chemically stripping it.
In my research I’ve found it’s tricky to get white paint off of wood and people keep saying you have to have particular lasers but I haven’t found any specific recommendations. I wanted to ask the people of Reddit before I hit salespeople


r/lasers • • 1d ago

I want to create a pocket size 250mw red laser.

0 Upvotes

Inspired by styropyro video, where he created a burning handheld laser with the best wheight/power ratio, i decided to do a simil project but stopping at the dvd burner LD.

My setup is very similar to his, I am using a 3mw red laser pointer for the base and all the circuit is identical.

The main problem is that i am not sure what case with lens i have to buy, since there are so many options and variables. I found one on aliexpress which seems to meet my needs, is a 12*30mm case with plastic lens (im not sure that is going to handle 250mw but i hope that it does). The size is perfect for what im going to do, but im concerned about if it can dissipate enough heat (i have no idea how much the LD will heat up), i mean, styropyro did that in an even smaller case, but i dont want to ruin a good LD, i have to be 100% sure that is enough at least for 15 sec running time continously before letting it cool down.


r/lasers • • 1d ago

class 3r green laser recommendation -- for pointing on construction sites

0 Upvotes

Looking for a green laser to use at a construction site to point out things. Saw there are some Class 1 and Class 2 options but the quick research I did made it seem Class 3R will be the highest/strongest available for consumer use.

What's a good/affordable/basic Class 3R green laser? Saw Olight makes some (Arkfeld) but was curious if there are good laser only options. Thank you.

edit: saw some from "laser classroom" --- are they a legitimate company? do not want to buy an off-brand off amazon/ebay


r/lasers • • 2d ago

SITE LEGIT? (BODY)

0 Upvotes

I am currently trying to get a sanwu pocket 200mw. people have been talking about this site, and is this it? Does it come with batteries, and a charger, or just a laser with no battery?


r/lasers • • 2d ago

LETS TALK ABOUT ONE THING: Is Laserpointerstore legit? I am trying to get the sanwu pocket, and i am not sure why it is so much cheaper, and includes so much more stuff than the original website.

0 Upvotes

I am trying to get the sanwu pocket, and i am not sure why it is so much cheaper, and includes so much more stuff than the original website. Do they do something to the laser, make it less powerful, or what?


r/lasers • • 2d ago

No Planes? No Problem!

Thumbnail gallery
10 Upvotes

Good time to get beam shots! Please check flight radar just in case.

Nova titan 2 watt green with beam expander. 520nm


r/lasers • • 3d ago

is looking at lasers through a camera safe?

0 Upvotes

I’ve seen it as of it being an alternative to goggles, possibly being even safer than them

observing the spot of a >5mW laser can cause eye damage, camera prevents directly looking at it

does it actually work as safety? how much better is it than looking directly?

of course the possibility of it hitting you from the side, that could be solved by looking through VR headset passthrough (although cameras would be expensive to replace if damaged), putting stuff around it (or even making a google cardboard) or using a camera with a viewfinder that is pointed at a screen instead of using optics


r/lasers • • 3d ago

Is laser pointer store a scam? I want 488nm 200 mw pocket, and its only 129 with a BATTERY AND A CHARGER INCLUDED, AND FREE GOGGLES!

0 Upvotes

looks sketchy, but seen some reviews. dont know if they are botted


r/lasers • • 3d ago

How do people like this not go blind?

Thumbnail
youtube.com
23 Upvotes

I’ve seen videos online like this one here of people using stupid powerful IR lasers like the one in this video, and half of them never wear eye protection AT ALL…

Are these lasers fake? Are these people just masters of safety squints? Or are they doing something behind the scenes with editing? Because from what I know a laser in the double or triple digit watt range isn’t exactly a casual point and click device.


r/lasers • • 4d ago

Laser à fibre

0 Upvotes

Bonjour à tous, je recherche un laser à fibre avec une source défectueuse (non fonctionnelle), à ​​petit prix. J'en ai besoin pour des tests avec un logiciel. Si quelqu'un en possède un et serait prêt à me l'expédier en France (à mes frais), je serais très intéressé. Merci d'avance !


r/lasers • • 4d ago

ACMER question

Thumbnail reddit.com
1 Upvotes

Hello,

The ACMER S1 2.5 watt is a great entry into the engraving universe for me. The issue is a lack of instructions on what all the settings mean when using the ACMER engraving software. I see parameters on the ACMER site for other engraver models. Does anyone know if there is parameter info for the S1 2.5w?

TIA!


r/lasers • • 4d ago

HELP Fume Extractor Recommendations for Co2 laser Cutter

Thumbnail reddit.com
0 Upvotes

r/lasers • • 5d ago

Photonics career advice

4 Upvotes

For those of you who have completed a PhD in atomic or molecular photonics: what kind of career opportunities did it open up for you?

I'm particularly interested in hearing from people who have completed their PhD and are now working in industry. What kind of positions do you currently hold? Did you move into the semiconductor industry, quantum technology, R&D, optical engineering, or something completely different?

I have a MSc in chemistry with a specialization in photonics and I'm currently considering pursuing a PhD in this field, with a particular interest in quantum optics, nanophotonics and light–matter interactions. I'd like to get a better understanding of how transferable these skills are outside academia and what kind of industry positions they can lead to.

How difficult the transition from academia to industry was and whether this PhD specialization has been an advantage or a limitation?


r/lasers • • 6d ago

SANWU? Legit?

1 Upvotes

Thoughts, good and bad? They seem legit af, I plan on spending quite a bit of money in the near future and don’t want to be scammed or dissapointed…..thoughts? Thanks! 🔥🙏💯


r/lasers • • 6d ago

OMTech 60w Fiber Laser

Thumbnail reddit.com
1 Upvotes

r/lasers • • 7d ago

Large soap bubbles and high powered lasers

9 Upvotes

Hey, so I was at an event a few weeks ago, and there was a lady making huge soap bubbles >30cm in size some easily 50cm big. The lasers were quite low maybe 7feet above everyone's head but pointed upwards into the trees, and she was taking the soap bubbles she was making and putting them up into the high powered lasers, I think there were 4 of them with multiple lasers each and 40watts total amongst them.

How dangerous would the lasers be refracting from the large soap bubbles? I was concerned and avoided looking at them, but I am very curious.


r/lasers • • 7d ago

Ir laser not affected by glass lenses for some reaaon?

2 Upvotes

I got one of those stupid handheld strong ir lasers.

I figured i wanna learn about optics and try to focus the beam which is divergent outwards.

Little info: to watch the laser, i use an IR camera, which allows me to see the beam.

So far i have tried effecting it with a magnifying glass, lenses from a bbgun scope.

I have made sure all the lenses are glass.

My tests have gone like this:

Lense secured to something solid, laser mounted to keep steady at a SLIGHT angle, to protect the diode from the reflection.

I observe through a camera, which allows me to see the actual beam at a low resolution.

And all of those lenses seems to do nothing to the divergense(v shaped, at maybe a 3° angle).

I observe the beam over 20+meters, so i should see a difference over that distance.

I also tried varying distamce from laser to lense, started really close, increased to half a meter.

What could cause this?


r/lasers • • 7d ago

🔥 Watch the Rust Disappear! 👀

0 Upvotes

r/lasers • • 7d ago

Why are green lasers so uncommon, especially on gun lasers

0 Upvotes

r/lasers • • 7d ago

TLR RM 2 Laser - duel function?

Thumbnail reddit.com
1 Upvotes

r/lasers • • 8d ago

Was at the Maker Faire Salzburg and had a chat with "LaserBrewer"

Thumbnail
gallery
18 Upvotes

Hello there - I was yesterday at the Maker Faire Salzburg with my Prusa CORE One Mini. Since I'm not that into lasers besides being a user of laser cutters as a tool, I found the booth of "LaserBrewer" (Massimo Capello from Italy) quite impressive.

Not sure, if this is old new to you guys here - but the LaserBrewer is a retiered Engineer that builds lasers / laser sources for fun and from scratch - and you can look at them close up and see their inner workings. He also showed me how to burn off a black textmarker from my skin with a 5 kW pulsed laser - i felt a bit like in in Starship Troopers.

I have a few more pics on my blog Maker Faire Salzburg 2026 – Rückblick & Top 3 Picks (german) if you are interrested - and if you don't already know that guy, check his Instagram - there is lots off cool stuff there: https://www.instagram.com/laserbrewer


r/lasers • • 8d ago

Commarker woes

Thumbnail reddit.com
1 Upvotes

r/lasers • • 8d ago

Alternatives to xTool F2 Ultra UV with vision-based conveyor batch processing?

1 Upvotes

I’m looking for recommendations for UV lasers offering functionality similar to the xTool F2 Ultra UV’s Smart Fill conveyor batch processing, preferably with local/offline camera recognition rather than cloud-based processing.
I engrave batches of 50–100+ small, irregularly shaped wooden blanks (1/8” plywood).

My whole business depends on this functionality without it my business cannot survive and I've been down since September with no solution in sight.

What I need:
Camera-based recognition of loose blanks on a conveyor or tray.
Automatic positioning and rotation compensation.
No dedicated fixtures or precise manual alignment.
One shape/design per batch (no mixed-shape recognition needed).
Reliable continuous batch processing.
Preferably fully local processing without cloud dependency based on the most recent issue Im having with the image processing. i don't want the algorithm to be suddenly changed or the image processing server to go down and render everything unusable.

Why I’m looking to switch:
My F2 Ultra UV previously handled this extremely well. Unfortunately, recent xTool software and firmware updates have completely broken this functionality.
The machine now typically engraves the first token correctly, then skips most subsequent blanks, engraving only one out of several. When it does engrave, the artwork is often incorrectly shifted upward and to the left or right, sometimes extending off the blank entirely.
I’ve attempted firmware regression, software regression all the way back to version 1.6.6, and extensive troubleshooting. So far, xTool has been unable to provide a solution.

I’ve been looking at WeCreat’s Lumos Ultra and industrial CCD conveyor systems from companies like Scotle.
Does anyone have firsthand experience with alternatives that actually perform reliable, fixtureless conveyor batch engraving? I’m particularly interested in recognition accuracy, software reliability, local processing capabilities, and pricing.