r/labsafety • • Sep 22 '20

Urgent: is it ok to store ethanol in fume hood overnight

1 Upvotes

Hi guys I am mixing ethanol and water with some polymers and nanoparticles. Before leaving the lab I looked at the msds for ethanol. Is it ok to leave this mixture in the fume hood overnight? I don’t want to cause a fire.


r/labsafety • • Jul 03 '19

Hello. This is not my very first lab exp.

0 Upvotes

Hello, I am an amateur. In my very first little tries always weared at least gloves and glasses. OK I was naked the rest. Just kidding. I am here to aks for gloves resistant to both acid (sulphuric) and cut, blades. Not going to spend a lot. $ Nitrile kinda scares me cause it drops in shreds very easily. Also common dish washing rubber no good.

Ty


r/labsafety • • Sep 23 '18

I accidentally dropped some Thioglycolic acid on my fingers during my lab examinations. Nothing happened at that time but when I got home i found my fingers to feel very smooth and the upper layer of my skin is getting lose. If I rub my fingers the skin would easily peel off. So what should I do?

5 Upvotes

r/labsafety • • Sep 23 '16

Need to do a chemical inventory? Triumvirate is offering a free tool to assess your inventory (after signing up)

Thumbnail
info.triumvirate.com
1 Upvotes

r/labsafety • • Oct 16 '18

Storing unknown, fuming liquids

1 Upvotes

Someone told me they found two containers without a label on them. He would like to dispose the chemicals as safely as possible but that is quite difficult to do if you don't know what exactly you're dealing with.

At that point I was searching for a specific subject for a project for my analytical chemistry education. In the beginning of 2019 I together with a few other students will have to come up with something for a project.

This seemed like good opportunity. Starting with two unknown chemicals and trying to figure out what they are. So I asked if the person who contacted me if he could take some samples. He took two samples of approximately 500 ml each.

Now I will have to store the two samples for several months in the lab. I will have to ask what is possible (which I'll do as soon as I arrive there). I would say storing them in a fume cupboard would be the best option but they are used quite frequently. Because of that I am afraid that even if I put a label on it that people would try to move it which brings the danger of people dropping it in which case I would be at least partially responsible. To be honest I am not exactly sure how to handle this.

Any idea of how I could do this safely?


r/labsafety • • Feb 24 '16

Why lab safety matters. Is it even possible to name all of the hazards in these photos? [xpost /r/chemistry]

Thumbnail
reddit.com
3 Upvotes

r/labsafety • • Apr 26 '16

Finally, we find out what the fox says

Thumbnail
vine.co
3 Upvotes

r/labsafety • • Sep 12 '16

[Discussion] Weekly lab safety check in! Share your successes, challenges, fails, and near-misses.

12 Upvotes

Hi everybody!

This is the first in a weekly discussion program that I'm planning. My idea is to have alternating threads between weekly check ins and specific safety topics, so if there's a topic you'd like to see here, feel free to suggest it.

 

With that said, how have your safety efforts been going? Any particularly lucky near-misses - if so, what do you think could be done differently in the future to avoid getting to the point where you rely on luck?

Got a frustrating lab member who just doesn't seem to value their own skin? Share your challenges and maybe someone here can offer some illuminating advice.

 

Have a safe week!


r/labsafety • • Aug 16 '16

[Brainstorm] What sort of weekly discussion topics would you like to see in /r/labsafety?

4 Upvotes

I've heard from a few folks that they enjoy the discussion topics that show up, so I've decided to try to make it more of a regular thing.

 

My current thought is to have alternating posts, switching between a regular safety checkin where people can talk about general challenges, events, successes, and topics that interest them, and a specialized discussion about topics like nanoEHS, fire safety, chemical waste disposal, etc.

 

So this is where you come in: What sort of specialty or focused topics would interest you? Have you had an experience or discussion that's prompted a particularly good conversation about safety?

 

Share your thoughts and ideas, and I'll compile them and we can start getting some more safety discussions going.


r/labsafety • • Jun 20 '16

More lab safety articles than you could shake a stick at! The UC Center for Lab Safety's 2015 press archive. Which ones stand out to you/would you recommend for others to read?

Thumbnail cls.ucla.edu
4 Upvotes

r/labsafety • • Aug 18 '17

Here's why 70% isopropyl alcohol works as a disinfectant, while 99% is nearly useless...

Thumbnail
blog.gotopac.com
16 Upvotes

r/labsafety • • Jan 15 '19

Rotovap safety

5 Upvotes

Im a PhD student and am concerned about our rotovap setup. At my previous university, all rotovaps were vented to fume hoods but this is so not practical in my current lab (all hood space in use, rotovaps on counters). The vacuums just vent to large plastic containers (that never catch anything and are just for show). We have 6 rotovaps in constant use and hardly anyone uses heat, they just use vacuum and of course most of this just gets vented into the lab as the solvents boil from the vacuum in the collection flask. Is this as big of a hazard as I think it is?

This is the way this lab has been operating for a long time but I am now the safety officer and can make changes. We could just run tubing to the ceiling then down to a hood. Most other rotovaps in other labs I have seen here are properly vented or entirely contained in a hood. Our safety office has never noted this on an inspection.

TL;DR: Is it acceptable for rotovap vacuum pumps to be vented into the lab or do they need to be vented to a hood?


r/labsafety • • Mar 30 '16

You might think that after the huge flinch, he might realize he should be wearing long sleeves... [xpost from /r/chemicalreactiongifs]

Thumbnail
i.imgur.com
6 Upvotes

r/labsafety • • May 18 '16

[Discussion] Lab safety check in! Here's a chance for you to share your lab safety challenges, successes, and fails.

6 Upvotes

I heard from many of you previously that you all wanted some more content about personal lab safety challenges, so I figured that a weekly discussion would be a good place to start. Should we keep this on Wednesdays? Some other day?

 

Full disclosure - I no longer work in a lab, but up until 6 months ago I spent 2.5 years doing molecular bio/stem cell research. These stories are from that time.

Challenge: Could never figure out how to come up with a better solution for agarose gel extractions. Tried plastic "razors" but the material quality was too weak and thin, and would flex really easily. Tried those gel extraction p1000 tips, but they weren't flexible enough for bands of different sizes.

**Success:**Had a postdoc who just wouldn't wear her safety glasses no matter what I told her. I eventually got in touch with our EHS department, and they had 6+ different types of safety glasses. From there, she was able to try them on and find a pair she agreed to wear regularly. Success.

Fail: Had to make a buffer with ~500mL 12N HCl. After using the graduated cylinder, I took it out of the fume hood and rinsed it in the sink and promptly made a lot of HCl gas that I then inhaled. Whoooops.

 

Share your own!


r/labsafety • • Apr 12 '17

Biosafety in the Laboratory: Prudent Practices for Handling and Disposal of Infectious Materials (manual)

Thumbnail
nap.edu
11 Upvotes

r/labsafety • • Sep 09 '16

A real and 100% accurate list of the chemical classification and labelling pictrograms.

Thumbnail
lostinscientia.wordpress.com
17 Upvotes

r/labsafety • • Jul 06 '16

How to Read Fire Diamonds

Thumbnail
youtube.com
43 Upvotes

r/labsafety • • Sep 14 '16

Need to get your lab's chemical inventory in line? This article does a good job of getting you oriented with some basic considerations

Thumbnail
labmanager.com
11 Upvotes

r/labsafety • • Feb 24 '16

Love video production and lab safety? There are some serious prizes for doing well in this lab safety video competition

Thumbnail
crdfglobal.org
3 Upvotes

r/labsafety • • Dec 18 '17

BASF opt out of safety goggles

Thumbnail
instagram.com
4 Upvotes

r/labsafety • • Sep 06 '16

For the butterf ingers in your lab: 5 ways to deal with clumsiness in the laboratory

Thumbnail
labmanager.com
4 Upvotes

r/labsafety • • Apr 29 '16

Secure that tank, Bill!!! Great gif for safety training presentations [xpost from /r/OSHA]

Thumbnail
i.imgur.com
15 Upvotes

r/labsafety • • Apr 12 '17

Prudent Practices in the Laboratory: Handling and Management of Chemical Hazards, Updated Version (manual)

Thumbnail
nap.edu
13 Upvotes

r/labsafety • • Apr 29 '16

It begins: University of AZ embraces the APLU's new lab safety guidelines. Will these guidelines finally be the push we need to get institutions to pay attention to improving lab safety?

Thumbnail
uanews.arizona.edu
4 Upvotes

r/labsafety • • May 09 '16

A measured take on the APLU's lab safety culture guidelines, and a great way to get up to speed on what's otherwise a complex resource. "Urging Universities to Act on Safety."

Thumbnail
sciencemag.org
4 Upvotes