r/hwstartups • • May 14 '26

5000 hours, $10,000.

0 Upvotes

This is some helpful advice for anybody who hasn’t taken their electronic product from prototype to market before.

It will consume 5000 hours of actual progress (including learning what you don’t know) and $10,000. This does not include the time and money used to make a prototype that proves the product’s value.

Unfortunately these are minimum figures. It comes as a huge shock to software engineers. Be prepared, and make sure your product solves a real problem people care about.


r/hwstartups • • Jul 06 '20

Get angry with a computer seller so I create an app.

0 Upvotes

To make a long story short, I bought a computer that needed to be assembled. The computer was to be used for an important project. The salesman gave me a deadline that suited me. The trouble starts when he goes over the deadline, I call him and he gives me another date. And again, he doesn't meet it. When I ask him where he is in the assembly he looks lost and I can see from his voice that he is tired of my calls. Sometimes he wouldn't take my call. I received my computer 1 month late and I was pretty angry as you can imagine.

Sellers, I know that you are tired of receiving calls from customers like me.

Buyers, I know that you are tired of waiting for purchases and not knowing the progress of the seller.

After that day I decided to create this app that help both side, Wattchy. A web application that allows small businesses to reassure their customers by giving them a follow-up of their purchase in real time. It's currently in beta(MVP) and I'm asking for your feedback.

Thank you.

https://www.wattchy.com/


r/hwstartups • • Jan 09 '26

Patent-pending hardware, huge market, but I want to keep 100% equity.

0 Upvotes

Hi everyone,

I’m an inventor from India who has spent a lot of time obsessing over a problem that has technically been "unsolved" for over two centuries: Venting during liquid transfer.

The Problem: Since the first patents were filed in the early 1800s (e.g., U.S. Pat. No. 1,259 (1810), U.S. Pat. No. 43,075 (1864)) and latest ones like. U.S. Pat. No. 12,338,113 B2 (2025) and various attempts throughout the 18th, 19th and 20th centuries, engineers have tried to stop the "glugging," bubbling, and splash-back that occurs when funnels are used to pour liquids into containers. Despite 210+ years of "vented funnels" and "specialized containers," the problem remains because historically, almost all solutions have:

Modified the funnel itself (vents, grooves, double walls, spiral channels).

Required container-specific designs (special caps, threaded adapters, vented bottles).

Been geometry-dependent, fragile, or non-universal.

Despite thousands of patents, the problem still exists in everyday household, laboratory, and industrial use — which is why people still accept spillage as “normal.”

The Invention: I have developed a Universal Self-Venting Adapter. The Magic: Instead of a new funnel, it’s a small, intermediate device that can be placed into a container / bottle and that creates a dedicated, high-speed vent path regardless of the bottle neck size or funnel size. I’ve filed a provisional patent covering the core mechanism.

Manufacturing: It is a single-material plastic device. It is extremely cheap to manufacture, has no electronic parts, and is small enough (3 cm x 3 cm) to ship in a standard envelope.

The market is massive and universal:

Household kitchens.

Automotive fluids.

Cleaning products.

Laboratories.

Industrial liquid handling.

Basically: anywhere liquids are poured into containers. The global market for physical funnels (lab, industrial, kitchen)—which includes vented and anti-spill variants—is valued at approximately USD 15–20 billion annually as of 2024–2025, with steady growth at 6–9% CAGR.

The Challenge (Why I’m here): I have filed my provisional patent and am moving toward the Complete Specification and PCT (international) stage. Most people tell me to go to VCs or Angel investors, but I am not interested in giving away equity because I have a whole bunch of interesting inventions lined up for manufacture. I want to manufacture this under my own brand and maintain 100% ownership.

As an international founder looking to enter the US and EU markets, I’m looking for advice on:

Non-Equity Funding: For those who have launched hardware without VCs, what are my best options? Is Revenue-Based Financing (RBF) viable for a product that is just starting?

Go-To-Market (GTM): Should I go Direct-to-Consumer (DTC) via Amazon FBA first to prove "social proof," or should I immediately target "Master Distributors" in the US/EU?

Purchase Order (PO) Financing: If I land a large distributor early on, how difficult is it for an international founder (Indian citizen) to get PO financing to fund the first 1 million units?

Distribution Paths: For a plastic utility gadget like this, are there specific "rep groups" or platforms (like RangeMe) that you’ve found successful for reaching retailers without a US-based sales team?

Kickstarter is out of the question since Indian citizens cannot directly launch a project on Kickstarter from India because India is not one of the currently eligible countries to set up a campaign and I am not too impressed with Indian Crowd Funding Platforms.

I’m not looking for "how to build it" advice—the engineering is done. I'm looking for "how to start it" advice while staying the 100% owner.

Thanks in advance — looking forward to learning from the community.

Raghu.


r/hwstartups • • Dec 09 '19

The Top 50 Movies All Startup Founders Must Watch

Thumbnail
loopinput.com
0 Upvotes

r/hwstartups • • Aug 27 '26

We got tired of waiting on fab houses and started building our own PCB machine. Some opinions on build vs buy that I'd like poked at.

0 Upvotes

Small hardware lab in India here. Last few years we've shipped a fuel telematics box for trucks, an offline payment card, and a bar pour sensor. Different products, same bottleneck every single time: the board. Weeks per spin from a pooled fab, longer if the stack-up was even slightly odd, and a flat no from most of them as soon as the design left panel rules.

At some point we stopped complaining and started building a machine to do it ourselves. One system that builds SAP/mSAP-class boards start to finish, coreless, nothing drilled, any outline and thickness. Goal is cost parity with the substrate fabs that own that tier today. First units go to pilot partners in 2027, so everything I say about it is intent, not a result I can show you yet.

Doing this forced me to actually think through build vs buy properly, instead of just being annoyed. Here's where I've ended up. Happy to be told I'm wrong.

Captive fab for a commodity board is a terrible idea. A 4-layer MCU board is a dollar or two from a pooled fab at volume and you will never beat that in-house, at any startup volume. I ran this for few of our commodity boards and the answer was "keep buying it". Where it does start to make sense is when the product wants a board the pooled fabs price at $20 to $50 a unit, or won't quote at all. Layer count that changes across the board, bare die inside it, an outline that follows the enclosure instead of the other way round. Redesign to that and the product gets smaller and runs longer on the same cell. Make it on a machine that's around 60% loaded and it comes out cheaper than the substrate fab quote for the same board.

Which also means the machine has to be reasonably busy. A startup doing a few thousand boards a month isn't going to keep one fed. However 20-30k units an year of a typical hardware consumer products and it starts to make a lot of sense. So in practice captive means a shared cell, or a fab that owns the machine for early stages, not a box in your own shed. What you actually want to keep is the design, the process data and control over supply. You don't need to own the machine to have those.

Assembly is a different animal. A decent SMT line with real test fixtures pays for itself somewhere in the low thousands of units a month, and honestly that's where most small hardware companies bleed time and money, not fab. If you bring one thing in-house, bring that.

Whatever you bring in has to be run like a product, not a project. Written procedures, fixtures that fail loudly, an operator who isn't the founder. Skip that and you've built yourself a second hobby.

And some stuff you should just keep paying for: anything clean-room class, RF-critical laminates, safety-certified assemblies where the CM's audit trail is the thing you're actually buying.

Curious where other people's crossover sits, and for anyone who did bring something in-house, what did you underestimate? For us it was fixtures. Always fixtures.

Edit, since a few people asked what a fab can't do that this can. The short list: lines under ~50 µm without volume and NDAs, layer count that varies across one board, bare die in the board instead of a package on it, and freestanding copper. That last one is the part I should have explained. The same copper that forms a trace can be grown thick and then have the dielectric around it removed, so it stands on its own. A spring contact, a battery tab, a shield can, a heat spreader or a simple segment display stops being a part you buy and solder and becomes a feature of the board, grown in the same run. Fewer parts, no connectors between them, geometry is whatever the layout says. For a normal 4 to 6 layer board, none of this matters, buy it from JLC. It only matters for the boards nobody will quote you.


r/hwstartups • • Jul 16 '16

Why do (some) people hate Arduino? a summary of my research into what electronics engineers are writing on the web - and what it means for us.

Thumbnail
curious.boards.net
0 Upvotes

r/hwstartups • • Nov 10 '19

Want to know how we make our high precision prototypes? Ask me here or I am also going to do a live video this week via our startup facebook page www.facebook.com/hyperlychee.official

2 Upvotes

r/hwstartups • • Jan 28 '20

Create a Product that Stands out of the Crowd with The Strategy Canvas

Thumbnail
thestrategyinstitute.org
0 Upvotes

r/hwstartups • • Jul 25 '17

How to Make a Wireless Sensor Live for a Year on One Tiny Coin Cell Battery

Thumbnail
thingsquare.com
0 Upvotes

r/hwstartups • • Aug 09 '20

Anyone working on a disruptive hardware startup?

2 Upvotes

Not talking about an Uber for this or that. Something truly new, hasn't been done before, or is 10X better that anything out there. I see so much rehashing of the same ideas, nothing that is truly innovative. What are YOU working on?


r/hwstartups • • Sep 26 '18

How a hardware SaaS company wants to help you not get lost in your data during product development, with Michael Corr of Duro Labs, USA

Thumbnail
thehardwareentrepreneur.com
0 Upvotes

r/hwstartups • • Jul 23 '26

**[FOR HIRE] Hardware Engineer available for freelance | PCB Design, ESP32-S3, KiCAD, Firmware**

1 Upvotes

Hey r/hwstartups 👋

If you're a hardware startup looking for an engineer who can take a project from schematic to production-ready Gerbers — I'm available.

I'm Hamza, an embedded systems and PCB design engineer. I work with KiCAD (4-layer boards), ESP32-S3, STM32, and handle everything from power circuits to firmware bring-up.

**What I can do for your startup:**

- Full schematic design + PCB layout (2 and 4-layer)

- DFM-ready files for JLCPCB, PCBWay, NextPCB

- LiPo battery management circuits

- ESP32 / STM32 firmware development

- Hardware bring-up and debug

- Custom Arduino board packages and variant files

**Proof of work:**

I just completed Elyssa — a 4-layer ESP32-S3 dev board with IMU, MicroSD, RGB LED, and onboard LiPo management. First prototype validated successfully on first spin. Currently in talks with NextPCB for a sponsorship partnership.

**Availability:** Immediate | Remote

**LinkedIn:** https://www.linkedin.com/in/bejaoui-hamza-382858290/

DM me here or reach out on LinkedIn. Happy to discuss your project 🤝


r/hwstartups • • Dec 01 '17

This $1 billion company was once rejected on 'Shark Tank'—here's how the founder proved everyone wrong

Thumbnail
cnbc.com
1 Upvotes

r/hwstartups • • Dec 25 '18

Anyone know of any prototype manufacturers I might contact?

0 Upvotes

Specifically I am trying to make some hard-drive's with some modifications, seeking an estimate/bid for the work. Your help much appreciated.


r/hwstartups • • 13d ago

Lost $10k on my first manufacturing order. Here’s what I wish I knew

0 Upvotes

I placed my first real production order and lost about $10k. The “factory” turned out to be an agent, the samples didn’t match what showed up, communication was a mess, and by the time I realized how bad it was the money was already gone.
Instead of walking away I started talking to other founders who had gone through the same thing. Almost everyone said the hardest part wasn’t the money
it was figuring out who was actually a real factory versus a middleman.

A few things that would have saved me:

• Always confirm they’re a real factory (visit, video tour, or someone you trust who has). A lot of Alibaba listings look identical on a screen.
• Ask for recent photos or videos of similar products they’ve actually made, not just generic catalog shots.
• Never send the full payment up front. Structure it around milestones.
• Get clear on tooling ownership and MOQ early.
• The first order shouldn’t require a warm intro to someone’s cousin in the trade. That system
is broken for most founders.

I’m now building a small beta tool that matches product founders with manufacturers we’ve actually checked (still early and mostly concierge).

Has anyone else been burned on their first run? What would have made you trust a manufacturer faster?
Curious what this community has run into.


r/hwstartups • • Jun 16 '26

I'll create a free animated explainer for your IoT/robotics/consumer electronics product - looking for 5 hardware founders

0 Upvotes

Hardware founders have a problem most software folks don't: your product does something physical and complex, but you're trying to explain it with a static image and a wall of specs.

Investors don't get it. Customers don't get it. Even your mom doesn't get it.

I've been testing whether short animated explainers solve this - the kind that shows how the device works, who it's for, and why it matters. No live footage needed, no agency, no 3-week production cycle.

I want to try this specifically with hardware products. If you're building an IoT device, consumer electronics, or something in robotics - drop a comment with:

  • What your product does (one sentence)

  • Who it's for

  • Is this a problem that you have and are constantly trying to solve?

I'll generate a short animated explainer tailored to your product and DM it to you within 24-48 hours. Free. No catch - I genuinely want to see if this works for hardware use cases, since most AI video tools are built with SaaS or something else in mind.

Worst case: you get a free video to experiment with.
Best case: you have something you can drop into your pitch deck, use for ads, use in help desk, crowdfunding page, or landing page tomorrow.

First 10 people that DM me.


r/hwstartups • • Jun 09 '26

Dont waste your time on broke VCs.

Post image
0 Upvotes

Look this is a bit click bait i'd admit 😭

But hear me out, I just closed my pre-seed and i thought that would be the best advice.

Did the usual thing at first Scraped 200 VCs off Twitter, sent ~150 cold emails, got 4 replies. Total freakin waste.

Turns out most names on those lists aren‘t deploying right now, or write at a totally different stage. I was pitching Series A funds on a pre-seed lol.

What fixed it: i rebuilt the list to only VCs (I put it on Articuler in case you need it) who'd written a check in the last couple months at my size (100-500k). I did this by hand at first - LinkedIn search + dumping their recent deals into ChatGPT and asking it to filter for active pre-seed checks. Tedious but it worked. Went from 200 names to 30, reply rate went from 3% to over 20%.

I think the best part was I never wasted time on VC who aren't going to deploy Anytime soon but has their KPI of doing coffee chats and talking to founders.

Closed 600k five weeks later.

Lesson: 30 right names beat 200 random ones, and recently active is the only filter that actually matters.


r/hwstartups • • Apr 21 '26

Cost of electronics project

0 Upvotes

Hello,

I've been trying to estimate cost of simple 12V powered electronic component project (for PC). GenAIs answers seem to depend on the star map and position of Venus on the horizon, so I wanted to ask for opinion here.

According to what Ive found, cost of project lands in high five-low sig-digit figures (60k-150k) without including R&D costs on PCB and firmware. How accurate is that estimate? Does anyone have experience with such project?


r/hwstartups • • Oct 22 '15

How Aeon is Elevating GoPro Videos Everywhere with Its Sleek Camera Gimbal

Thumbnail
fictiv.com
0 Upvotes

r/hwstartups • • Jun 21 '26

How "hard" must hardtech startups be?

0 Upvotes

My meaning of hard is difficulty and not opposite of soft. Is a PC hardware startup considered hard enough? Is there anyone doing something similar and managed to be categorized as hardtech?


r/hwstartups • • Feb 01 '26

We built 15 free AI tools for hardware engineers — looking for feedback

0 Upvotes

Hey r/hwstartups,

We've been building Ohmframe AI Portal — a set of AI-powered engineering tools specifically for hardware teams. Think of it as an engineering copilot for the stuff that eats up your time: DFM reviews, cost estimates, tolerance stackups, FMEA reports, etc.

What's on the portal:

Manufacturing & Design

  • DFM Analyzer — Upload a design and get manufacturability feedback across 84 rules (sheet metal, CNC, injection molding, die casting, 3D printing, etc.)

  • Cost Estimation — Instant manufacturing cost estimates with volume pricing and live commodity pricing

  • Tolerance Stackup — Worst-case and RSS stackup calcs with Monte Carlo simulation

  • GD&T Advisor — ASME Y14.5 recommendations with feature control frames

  • Material Selector — Ashby-method trade-off analysis across metals, polymers, and ceramics

  • Quote Analyzer — Upload a supplier quote, get should-cost modeling and negotiation insights

  • Simulation Assistant — FEA/CFD setup guidance (mesh, BCs, solver selection)

  • CAD Macro Generator — Natural language → SolidWorks/Fusion 360/FreeCAD automation scripts

Documentation

  • FMEA Generator — Automated failure mode analysis with risk matrices

  • Tech Docs Generator — Specs, assembly instructions, maintenance guides

  • AI Diagram Generator — Technical diagrams from text prompts

IP & Research

  • Patent Prior Art Search — IPC/CPC classification, search strategy, patentability analysis

  • Standards Lookup — Find relevant ISO/ASME/ASTM standards for your application

Plus an Engineering Chat that actually knows the difference between 6061-T6 and 7075-T6.

Desktop Copilot (available on request)

We also have a desktop companion app for Windows, macOS, and Linux:

  • Screen capture → DFM analysis — Capture your CAD viewport and get instant manufacturability feedback without exporting

  • files

  • Real-time cost estimation — Point it at your design and get manufacturing cost breakdowns on the fly

  • Works alongside your CAD tool — SolidWorks, Fusion 360, or whatever you use. No plugins, no file exports. Just capture

  • and analyze.

If you're interested in trying the desktop app, DM me with your use case and I will provide a API key.

How to get access

The portal is currently invite-only since we're in the early stages. We're dropping 5 invite codes in the comments below — first come first served. If those are used up and you still want to try it, send me a DM with your use case and I'll get you a code.

One ask: The portal is in its initial phases. Every tool page has a feedback sidebar on the left — please use it. Tell us what's broken, what's missing, what would actually make this useful for your workflow. It goes straight to us.

Link: ai.ohmframe.com


r/hwstartups • • Jun 24 '25

We got tired of sending CAD files into a black box—so we built this instead

3 Upvotes

Hey everyone,
We’ve been working on hardware projects for a while and kept running into the same problem—every time we sent parts out for machining, it felt like throwing our CAD files into a black hole. Sometimes they turn out okay, and sometimes they're terrible. There's no consistency.

Sometimes we’d wait days for a quote. Sometimes we'd get the wrong part. Sometimes there was no communication at all. It was frustrating, especially when you're trying to move fast and iterate.

So we decided to build a better way.

It’s called Ziqual—it’s a platform that connects you directly with vetted machine shops (not anonymous factories), lets you upload CAD files and drawings, and get real quotes from real humans. You can even talk to the machinist before your part is made.

No middleman fog. No mystery pricing. No weird part surprises.

We built it to scratch our own itch, but it’s working well enough now that we're opening it up. If you're prototyping and need machined or 3D printed parts, happy to share early access or answer any questions.

Would love feedback—from engineers, founders, or anyone who’s dealt with this.

(Apologies if this feels like a plug—happy to take it down if it’s against the rules. Just thought this might be useful for folks building physical products.)


r/hwstartups • • Jun 05 '18

We're zGlue, a startup offering an unparalleled integration techology for IoT and Wearables

1 Upvotes

Hi, zGlue is a Silicon Valley startup that is dedicated to bringing the advantages of SiPs and SoCs to the masses without any of the headaches, complexity, or development times that are usually associated with those technologies. We have a really cool active silicon interposer that integrates a bunch of features and common things that we see in systems. Modules can be easily and quickly customized to integrate other chips/features. Right now we are mostly geared toward low powered applications such as wearables and IoT, but one of our advantages is that we make it easy for anyone to use our technology. We just launched our first module, which we are calling zOrigin, and can be found here. More info can also be found on our website. We're happy to answer any questions you might have right here!


r/hwstartups • • Apr 09 '16

I'm in the finals of a startup funding competition with Flip - a wallet that treats all of your cards equally!

Thumbnail
imgur.com
1 Upvotes