r/hometheater • • Dec 22 '24 Heart of Silver

Showcase - Dedicated Space "Finished" my dedicated 7.7.4 Home Theater!

Thumbnail
gallery
8.9k Upvotes

Hello Everyone!

My dedicated basement theater was built about a year ago in our new home. As we all know, a theater is never truly finished so during the last year I've done a lot of tinkering, upgrading, swapping out equipment, and making improvements all around the room.

I'm at a point now where I consider it "finished" (though I do have a few things in mind... lol).

The theater was initially planned by a local installer, but I did a lot of the work myself. For example, I built the current subs, did the sound calibration, created the acoustic panels, and installed the fabric in the front.

Over the last few months, I’ve tested various subwoofers and setups. Now, I’m finally at a point where I’m happy with the results. I’m running 7 DIY Dayton Audio Ultimax II 18” subs, and with the help of a miniDSP and MSO (Multi-Sub Optimizer – highly recommended!), I’ve achieved a beautiful frequency response that’s flat down to 6Hz. I’m probably going to add one more sub in the front, not because I need the output, but for the visual appeal. I think it looks way better with four subs in the front.

I’m also running a HoverEZe platform. If you’re not familiar with it, there’s a lengthy thread on AVS Forum. Essentially, it’s a plywood platform for your seating, with thick bike tubes (at around 3 PSI) placed underneath. The tubes house subs that fire into the ground (or up), creating movement. This makes the couch move and vibrate depending on the frequency. When I first heard about this, I thought it sounded gimmicky. I also don’t like things like 4DX. But let me tell you—when this thing is set up correctly and dialed in, it’s a game changer. It adds so much to the movie-watching experience. Whether it’s King Kong stomping on the ground and feeling it in your whole body, or subtle movements in horror movies that make the scene even more tense and terrifying. In my setup, it goes down to 3Hz(!). It’s CRAZY!

I highly recommend this if you can implement it in your system. It’s also very cheap for what you get. Here’s a video of mine in action: https://www.youtube.com/watch?v=pcU00gPtCuo&ab_channel=DF

Upgrades Planned for Next Year

  • A new AVR or Pre/Pro to add front wides. I’m considering the Marantz Cinema 30 or AV10... or maybe just getting that Trinnov already. :D

  • More professionally planned acoustic treatment. What I have now only treats the first reflection points and eliminates the echo. Honestly, I didn't do enough research to properly treat my room. I think there’s a lot more I can improve here.

  • One more sub.

I’d love to hear your feedback or any recommendations you have for me!

Happy Holidays!

Equipment List

Video:

  • JVC NZ7 projector

  • Stewart Filmscreen Studiotek G4 130" acoustically transparent 2.35:1 screen

  • Lumagen Radiance Pro

  • Panasonic UB9004 UHD player

  • Apple TV 4K

  • PS5

Sound:

  • Yamaha Aventage RX-A8A

  • 7 Bed Layer + 4 Atmos speakers (all Gato Audio FM-9, except the surrounds, which are Gato Audio FM-30)

  • 7 DIY Dayton Audio Ultimax II 18" subs

    • Driven by two Sinbosen FP-10000Q (2100W/channel)

  • HoverEZe platform with 8 JBL Stage 122 12" subs

    • Driven by Behringer NX6000D (like 350-400 watts for each sub)

  • 3 miniDSP 2x4HD

  • 3 Dayton BST-300EX Bass Shakers + 2 Fosi Audio Amps (not set up yet—need some time to dial them in with the HoverEZe)

Accessories:

  • Speaker/power cables, power strips: Mostly Audioquest and Audioplan (in hindsight I got upselled pretty badly and I’d save money here next time).

  • Logitech Harmony Elite: Can someone release a good new remote already?


r/hometheater • • Dec 17 '25

Showcase - Dedicated Space My new home theater!

Thumbnail
gallery
6.3k Upvotes

Finally finished my basement home theater. Wanted to share this sooner but had some issues with rug installation and then required some touch up painting as well.

AV Equipment for 7.1.4 Atmos

LG G4 83" OLED

DENON AVR X3800H

Base Level Speakers - RSL W25E

Heights - RSL C34 MKII

Subwoofer - RSL Speedwoofer 12s

I know that many folks don't love in-wall setups and there's big tradeoffs, but for my space it was really the best option. I could not move any of the doors and I was limited by size of the space and aisle widths.

All walls and ceiling were insulated with Owens Corning Sound N Seal mineral insulation and I'm happy to report I can watch movies late at night with the volume cranked without disturbing my family who sleeps on the second floor.

I considered a projector initially, but I plan to play video game sin this space and also had some beam issues to deal with so went with the OLED instead. I was also limited slightly with screen size due to ceiling height (7.5ft) and needing to keep an unobstructed view for the second row.

My AV closet is in the rear of the room with a conduit running to the rear of the TV for future cable changes. NOTE: USE A CONDUIT. I initially ran my fiber hdmi cable backwards by mistake and if I had not runa conduit this would have been a very messy and costly mistake. With the conduit it was a 15 minute fix.

The AV closet also has a passive intake built into the bottom of the door and an AC Infinity Airframe T7 exhaust built into to exhaust hot air out into an adjacent room

Seating: Weilianda Chic Series Recliners

I absolutely LOVE these recliners and I was NOT sponsored by anyone for this project, nor to share my thoughts.

I went back and forth a lot on seating, originally planning to get sectional sofas, then looking at some of the other "home theater" companies. I ultimately went with Weilianda after they sent me some leather samples. My primary concern was quality of the leather, so my first "test" was to cut up the sample and see if it was cheap dyed leather. It was not - the leather quality and color runs all the way through the leather and if anything is ever scratched there is no dye that will come off.

The seats are firm, but in a very comfortable way and the build quality and stitching is excellent. I purposefully chose loveseats so that we could snuggle up with our young kids on movie nights.

Every chair also came with a carbon fiber tray table and they even through in 2 of the phone/tablet holders which I use all the time - especially on football night when I'm tracking my fantasy league lol.

I'd also like to share my experience of working with Weilianda because their customer service has been outstanding and incredibly responsive, which is so rare these days. I was missing a couple of the included tray tables and within 24 hours of reaching out they responded and had them in the mail. They've since followed up with me to make sure I was satisfied with my order and see if there was anything they could do for me. I can't think of another business that has done this in recent memory.

I'm going to post a separate review of the chairs this week because when I was searching for reviews they were very hard to find and maybe my experience helps someone else.


r/hometheater • • Jul 24 '26

Showcase - Dedicated Space SPACE SHIP!

Thumbnail
gallery
6.0k Upvotes

The door is motion sensor opening.

Regarding the screen size looking small, it's due to the wide angle lens. Here's a video showing more normal proportions. Starts from the third row and goes down to the first.

7.2.6 Atmos

Screen Inovations FT133MW2

Sony BRAVIA Projector 7

Marantz CINEMA30

Center Monitor Audio S7GC250BG

L/R Monitor Audio S7G500BG

Surround Monitor Audio CSW2MCP

In-Ceiling Monitor Audio CSC2L-CP

Subwoofer Episode ES-SUB-MEGA-S10-BLK

Seating Palliser Vivid

My theater is 95% finished. Just missing some touch up details and final framework, but we’ve been stuck at this step for the past several months now.

Unfortunately did not take many photos during the construction process (for some reason). The space was initially unfinished basement space. The back wall basically split the unfinished area in half. The initial design itself started with the cockpit of a space ship and moved forward from there. Honestly, we just had fun with it drawing inspiration from various sources (cough Star Wars cough). We kind of had to just roll with the punches and make changes on the spot as there were a lot of unanticipated complications. Definitely are pros and cons of working with an unfinished area.

Rockwool sound insulation. It was essentially all done with lumber. First step was framing the risers and from there the hexagonal shape. That was probably the trickiest part as the room isn’t a perfect rectangle. Built up a wall in front of the electrical panel where the screen is mounted.

The other big issue were those vents running through the middle of the area. It would have caused problems with mounting the projector as well as head clearance on the middle and top risers. The solution presented itself in the diagonal spaces created on the sides of the room, so they were diverted to the left and right sides of the room and hidden underneath the paneling.

From there it was pretty much plywood boards around the space and one additional layer on top for the various shapes on top of the paneling and paint.

The star panels were custom ordered to fit the space and mounted on top, which was also a pain as they are a couple inches thick and the math starts becoming a pain when you have so many angles (one point in the top left particularly was a bunch of smaller pieces).

That’s pretty much it! We are waiting to install final framework to really make the star panels look like individual panels like the front of a cockpit instead of a continuous scene. Afterwards we will start adding detailing on our own time (like rivet heads, maybe some paint detailing and buttons/lights).

The biggest hurdles was trying to get the idea to work with the space and making sure the space remained structurally sound, which involved a lot of last minute adjustments and changes.

No real complaints about the seating. The grommets though are kind of eh and unnecessary. LED channels around the hexagonal framing and throughout. The LEDs have actually caused a bit of problems – can’t get the entire color range to properly work on all the different channels simultaneously, but a fix is in the works.

Overall, we are very excited with the result! The star paneling stays on or off depending on the mood. Trying to figure out a way to add a dimmer option to them, but I zone it out pretty well.

The next step is working on the room connecting to the theater in terms of lounge space and maybe some mini concessions. And from there the entire house will slowly be converted into a giant space ship.

 No, this is not a DIY. All credit to the builders for making our concept come to life!


r/hometheater • • May 20 '26 WOW Popcorn Mindblown Heartwarming Bravo

Showcase - Dedicated Space Mission Accomplished [Feb 2024] - Long time lurker, First time poster.

Thumbnail
gallery
5.7k Upvotes

r/hometheater • • Sep 21 '22

Showcase - Dedicated Space I built my dream ‘80s Mom & Pop Video “Store” & Home Theater in my Basement over 4 years and many late-nights. 13,000+ working VHS, Laserdisc and more. Hope you enjoy💥🍻📼

Thumbnail
gallery
5.1k Upvotes

r/hometheater • • Dec 18 '20

AV Porn/Subgrade My Home Theater (10 Years of Planning)!

Thumbnail
gallery
4.8k Upvotes

r/hometheater • • Jul 09 '25

Purchasing US I asked this sub if I should go with 100”. You guys did not disappoint.

Post image
3.6k Upvotes

r/hometheater • • Feb 28 '25

Discussion Trying to make amends!

Post image
3.5k Upvotes

Heavily tweaked some EQ settings on my AVR and physically turned down the volume on the back of the sub to help reduce the noise. Others have suggested special feet for the sub which I can look into. Thanks for all the feedback! I hope I can make things up to the neighbor!


r/hometheater • • Feb 10 '25

Install/Placement Imagine my surprise

Thumbnail
gallery
3.2k Upvotes

I bought my house almost 2 years ago and finally decided to replace these terrible sounding 25 year old JBL in-ceiling speakers. Then I take off the grill and find this.


r/hometheater • • Jan 08 '26 Thanks Popcorn

Showcase - Multipurpose Space Whole basement movie theater experience

Thumbnail
gallery
3.1k Upvotes

Its been a long, long project but my basement theater is just about all wrapped up. A dedicated room would have definitely been easier and less expensive but I didnt want to sacrifice our only guest bedroom. Reddit, youtube and theater forums were a wealth of knowledge along the way so I figured I would give back and share results.

Whole basement is double 5/8. First layer is 5/8 osb. Living room area got hat channel and clips on walls and ceiling. 5.2.4 jbl synthesis speakers, PSA subs, Arcam equipment, jvc projector, and a Seymour screen.

Fun projects were the 3 recessed digital movie posters (43 inch tvs) and the arcade/game room to play some games while the popcorn is popping. The acoustic panels are true 4 inches deep in wall mineral wool with acoustic transparent fabric. They look like the costco ones.

Last bigger projects left are to build my door that will seal off the stairwell, clean up wiring and equipment rack, and the dreaded fiber optic star ceiling. The 8x12 panel is built, wrapped in duvetyne, and recessed into ceiling for now. It was a mad rush to get it mostly completed so we could host christmas.

I was really chasing that nostalgia of going to the theater as a kid. We grew up in a small town so it was a rare and real treat when we went into the big city to take in a show. The popcorn, playing some games, walking down that hall and seeing the movie posters teasing what was coming soon! Anxiously waiting for the lights to dim and the show begin, it was magical back then.


r/hometheater • • Nov 22 '25 WOW

Showcase - Dedicated Space DIY theater update: COMPLETE!

Thumbnail
gallery
2.9k Upvotes

I've "finished" my DIY home theater build. It started as a typical over the garage 12x24 bonus room. I gutted it down to the studs and started from scratch. I reran the electrical and added a 20a circuit for the rack. I used r30 rockwool all around the room, used hushframe brackets for decoupling, fully wrapped the room in 3mm MLV, putty pads on all penetrations, two layers of 5/8 drywall with green glue and acoustic caulking of all seams in the first layer. All speaker runs are 12ga and there are conduit runs from the closet to the projector box (integrated into the rear ceiling), behind the screen, front of the riser, eaves area behind wall on opposite side of the room and into the attic in case of future needs.

I spent a few years planning it out while tackling other projects in the house and it's been almost a year of work. The only parts I subbed out was the wallpaper and carpet install. The rack sits on a slide out to gain access to the rear and there is a hidden door for the closet to get access to wiring. The star ceiling is the night sky the night my wife and I got married, it doubles as an acoustic panel as it's 2" roxul 60. The side panels are also filled with rockwool and hide the speakers. It's a diy 116" 16:9 spandex screen with a motorized making panel for 2.35:1 content that's integrated with HA.

I ran calibration with A1 Evo Express and I found the process fairly painless and I think it produced great results. For a free product you can't ask for much more.

I still have to play with the unfolded circle 3 remote to streamline some things. Lighting is controlled by lutron caseta switches integrated to HA. I also need to build the rack PC and I'm planning a 120+TB setup to rip all my disks to stream them locally. I also have a 1950 gold medal pop-a-lot popcorn machine that will replace the current popper but I have to finish the restoration.

Gear list: Projector: Sony VPL-VW675ES Streamer: Nvidia shield pro Receiver: Denon X6800H Amp: 3x Marantz MA500 powering LCR Audio: Bowers and Wilkins L/R - 603s3 Center - LCR600 Side surrounds- 602s3 Rear surrounds - 600s3 Overheads - CCM80 Subs behind screen 2x ASW 1000 2x ASW 650 1x ASW 600 Subs built into riser -GRS 10SW-4HE LFE transducer - BST-1 powered by BSA-200

If you're interested in seeing the whole build process, you can see all my previous posts in my profile


r/hometheater • • Nov 06 '24

Showcase - Component I made a portable 5.1 surround sound speaker system

Thumbnail
gallery
2.9k Upvotes

Hello fellow home theater enthusiasts.

I wanted to enjoy 5.1 surround while out-and-about so I designed and assembled this portable 5.1 surround sound speaker system.

Hope you enjoy!


r/hometheater • • Feb 27 '25

Discussion I feel bad now :(

Post image
2.9k Upvotes

Sony STR-DN840 paired with ONKYO STS HT540 Home Theater Setup in small 3rd floor apartment


r/hometheater • • Jul 19 '24

Showcase - Component So I bought 115” tv

Thumbnail
gallery
2.8k Upvotes

Hey. I watched Linus, was thinking of importing the thing. Also found guys on amazon with 110” for 9k that would just drop it off in the front of the house

But I decided to go with bestbuy for 20k and free installation and at least some support if something goes wrong

Took 2 visits from geek squad to install (I had to reinforce the wall for the wall mount)

Huge improvement over UST projector with 120” screen, especially during the day.


r/hometheater • • Nov 12 '24 Popcorn

Showcase - Dedicated Space My Home Theater Project in the Basement – 8 Months of Hard Work for Total Immersion!

Thumbnail
gallery
2.7k Upvotes

r/hometheater • • Apr 01 '21

Install/Placement Star Wars Theatre

Post image
2.7k Upvotes

r/hometheater • • Apr 04 '26

Purchasing US I think I used up all my luck for the next few years.

Post image
2.6k Upvotes

The way it worked out was:

I bought a 98" Q80C on sale at Best Buy. The in-store tag said it was normally listed at $4,499.99, but they had it marked down to $1350.99. I just randomly stumbled onto this sale. It wasn't listed on their website, I had no intention of buying a TV that day. I just got really lucky.

A few weeks after it was delivered, I discovered a noticeable section of black within the screen. Thinking they were dead pixels, I called customer support, and they sent out a single tech to repair it. He told me that what had likely happened was a small piece of plastic had broken off of the frame and lodged itself between the panel and the screen.

He replaced the panel (again, on his own) and, in doing so, caused massive warping in the screen. The coloring was way off, super noticeable. So, I called Tech Support again.

This time, they brought 2 guys out. They probably should've sent 2 guys the first time, but whatever, that's on them. They replaced the second panel and, again, major distortion. So, I called Tech Support a third time.

They sent those same 2 guys who replaced the third panel, then left in what felt like a hurry after they told me it looked good. I took a look and, again, extremely noticeable distortion.

After trying to repair it 3 times, I was informed that they would reimburse me for the panel and that the reimbursement would be equivalent or greater than the Q80C.

So, after verifying that I bought it from a reputable dealer and giving them a copy of the receipt, they came and picked up the unit and gave me a reimbursement of $6750. I wasn't going to question them on it.

These 3 TVs all happened to be on sale. I used the reimbursement and an additional $100 off coupon for orders larger than $XXXX. (I don't remember the exact deal), and an additional $600ish to get all 3 OLEDs. The retail value was around $10,500. In total, I ended up spending close to $2000.


r/hometheater • • Sep 22 '26 Popcorn Bravo

Showcase - Dedicated Space FINALLY FINISHED! I present to you, The Burrow.

Thumbnail
gallery
2.5k Upvotes

Well, after 6 longs months of working tirelessly, I have finally finished my dedicated theater room in my basement. What started out as a completely unfinished basement has now turned into my friggin sanctuary, and even my 12 year old daughter and her friends are in awe of how it turned out, so you know it's good. 👌 Room is 17.5ft long x 16.5ft wide by 7.5ft tall running 7.2.4. The only thing not shown in the photos is the hat channel mounting clips I used on the ceiling trusses, which the double-layer drywall was then screwed into.

Finished photos first, as is tradition!

You'll see throughout the build how I did everything I could think of to both keep the budget down and also to isolate sound from the rest of the house. This theater is directly below the living room/dining room, so I needed to make sure that while I was watching at my preferred volume (below reference but above what my wife says is "comfortable" haha), it didn't bother anybody upstairs too much. The result is that even while watching heavy action flicks, I am told that it sounds like some annoying car outside revving their V8 or bumping their trunk subs, which I consider a HUGE WIN. The low bass is audible, but it's very subtle compared to how loud it is in the room. I have earned WAF and I cannot be more thrilled.

Here's a breakdown of the costs:

Home Depot (mostly mineral wool insulation but also some outlets, switches, and caulk tubes) - $945

Extra insulation from FB Marketplace- $400

Lowe’s (hat channel and some random hardware) - $372

Menard’s - $4267

Tractor Supply stall mat - $80

Best Buy for ceiling speakers- $170

Sherwin Williams Emerald Matte Tricorn Black and Rainstorm - $430

MF-DC4 Clips - $121

Amazon - $2,234

XGIMI Titan Noir Max projector and Silver Ticket matte white 128in screen - $5,459

FB Marketplace Denon x6800h - $2,000

Earthquake XJ700-DSP Transducer Amp - $665

Wayfair Couch - $1,400

Wayfair Console - $250

Outlet store Floorigami It’s Magic carpet tiles - $300 (this was probably my best deal by far at roughly $0.60 per sqft).

Double 5/8in Type-X drywall plus finishing (contracted out) - $4,500

Electrical (contracted out) - $1,500 (I had them run a single 15a circuit for the standard outlets and the lighting, and two, separate 20a circuits for the front wall/projector ceiling outlets and the subwoofer outlets in the corners. It is VERY important to check the wattage of all your equipment to make sure you're not tripping breakers at full load!!!)

Speaker grille cloth movie posters from Contrado - $250 (I don't like having my absorption panels just be black rectangles on the walls, so I created some custom poster images and printed them on acoustically transparent fabric. I have to admit, these were significantly less expensive than I had worried they'd be at only $50 each.)

The Menards purchases were mostly framing and lumber stuff, but also included XPS foam boards for the basement walls, adhesives, spray foam for the rim joists, structural screws, etc…)  The Amazon purchases were far too random, but included the two Q10B transducers, wall plates, rca keystones, speaker wire keystones, the speaker wire itself (OFC 14/2 or 14/4), hat channel isolation clips, acoustic putty for sealing the wall penetrations, some foam isolation panels, speciality fasteners, and various other things.

Total cost came out to just over $25,000. Expensive, but I would've paid A LOT MORE if I hadn't DIY'd it.


r/hometheater • • Aug 03 '26

Install/Placement Air bnb. Tv fell. How to prove we didn’t rip off wall.

Post image
2.5k Upvotes

We’ve already left. Cleaners found it when they arrived. Owner sent us this.

Edit: Wow. Thank you everyone!! I super appreciate all of your advice and knowledge! Will keep posted on what happens next. I’m hoping he just drops it.


r/hometheater • • Feb 17 '25

Discussion I think I made a big mistake

Post image
2.4k Upvotes

Guys I think I made a big mistake, my room is 15 x 15 x 10 and I got this new pb 16 ultra subwoofer, and it feels / looks way too big. Do you think I should keep it? Upgraded from a SB4000. I am telling myself it’s ok since we might buy a bigger house in next 4/5 years. I sit 10 feet away from the sub / screen. Anyone else having issues with large subs in small rooms?


r/hometheater • • Mar 23 '26 Hooray Bravo Regret

Showcase - Dedicated Space We transformed our basement into a home theater.

Thumbnail
gallery
2.4k Upvotes

We bought this house last year, and after my lazy attempt to turn the small basement into a “home theater,” we decided to go all in and create a real one. A local AV company helped us design and bring our vision to life. It's not finished yet, but very close. We're waiting on two Lutron shades, some artwork, and a table for the back area. My daughter mentioned a secret door in front of my wife and our cabinet guy, so now we have one.

Edit to add, cost was 200k.

Three front speakers, four ceiling speakers, and 4 wall speakers all behind the black stretch fabric with acoustic treatment all around. The back wall with have acoustic artwork. We were supposed to have two subs but due to some spacing we decided to skip it for now but can add later if needed. So far the sound is amazing.


r/hometheater • • Jul 16 '25

Showcase - Multipurpose Space Going from an 85 to a 98 is a welcomed upgrade. Still giggling like a little kid.

Thumbnail
gallery
2.4k Upvotes

MAX Jr Theater Revision: #????

I feel like every year I’m doing something different to this room, anyways, upgraded to a 98 TCL QM7K. Last week sale price was hard to beat. Been happy with my 85 Sony 900H for the last five years but been having that itch to go bigger. I love how it fills in with the beams. Wasn’t sure how much of a difference it be going to this size but man, immediately lost my mind, couldn’t stop giggling while I finished putting the room back together. Ready for a bunch of more movie nights ahead.

Last photo is the 85 for reference.

Gear:

TV: TCL 98” QM7K | Receiver: Denon x3800H | AMP: Behringer NX1000D | AMP (For Bed Layer): OSD Nero XA5180

Subwoofer: SVS PB12-NSD / SVS PB2000 + 8 JVC 12 Inch Subs under couch (BOSS)

Speakers: Left/Right: KEF Q350 | Center: KEF Q650C | Rear Left/Right: KEF Q150 |

Height Speakers: Middle Heights: Polk S10 | Front and Rear Heights: SVS Prime Elevation

Consoles: PS5/Xbox Series S

Streamer: Apple TV

Area Rug is 12x15, shaggy, thick and comfortable. The dog loves it.

Quick Facts about setup:

•Wires for the TV and Speakers are ran through the wooden beams on the ceiling. Decorative and functional.

•Speaker stands for the left/right are Atlantic’s (can be found on Amazon) slightly modified with a wooden base for the speakers.

•Center speaker shelf was homemade with wood I stained and some brackets.

Previous Build Posts:

https://www.reddit.com/r/hometheater/s/WvDhJHVWOu

https://www.reddit.com/r/hometheater/s/M7vQGMbQSN

https://www.reddit.com/r/hometheater/s/4FwU009YIw

https://www.reddit.com/r/hometheater/s/srZQyJfu44

Couch Subwoofers: (V1) https://www.reddit.com/r/hometheater/s/bIRpSfXGuu (V2) https://www.reddit.com/r/hometheater/s/rLNw3uZo5k


r/hometheater • • Mar 20 '21

Discussion The struggle

Post image
2.4k Upvotes

r/hometheater • • Aug 24 '25

Showcase - Multipurpose Space Built a media console with a secret

Thumbnail
gallery
2.3k Upvotes

Just moved in with my girlfriend – I love home theater stuff, she hates the idea of a massive black TV eating the wall.

Solution: built a simple oak veneer bench that looks normal… until you slide the top and a 72 inch projector screen rises up with a hidden projector. When it’s off, it’s just furniture again.

Running Apple TV + two HomePod minis. Honestly, I think this is my best relationship hack so far 😂