r/homebuilt • u/Arbalete_rebuilt • 3d ago
r/homebuilt • u/PokePilot • 6d ago
New rules for /r/homebuilt
Hi everyone! Since the subreddit has been without an official set of rules for a very long time, we've added some rules aimed at keeping posts here relevant and of good quality.
Please feel free to give us feedback! We plan to adjust these rules as needed to best fit the community.
1. Posts must be relevant to homebuilt, experimental aircraft.
First and foremost, posts in /r/homebuilt should be about, well, homebuilts! Certified aircraft such as Cessnas, Pipers, and yes, even Cirrus aircraft, are great, but until those aircraft can be built in your garage, they don't really fit the spirit of the sub.
In the last few months, there has been a noticeable uptick in posts about RC aircraft and model aircraft. An argument can be made that many of the same techniques can be used to design and construct both unmanned, scale aircraft and manned, full-size aircraft. That said, they are two fundamentally different categories and this sub is intended to discuss the latter. There are some great RC communities at /r/RCPlanes and /r/radiocontrol if you're into those things!
2. No advertisements or self-promotion.
Posts that are clearly trying to sell something will be removed with prejudice. This is a place to hang out and talk about cool planes, not further your business or grow your personal following. Sharing a video you took during a recent flight is fine; begging people to leave a like on your video and subscribe to your channel is not.
As far as electronic tools/programs/apps/sites: we welcome sharing tools you've made that may help other builders with their projects, but any app that stands to benefit you financially or through collection of user data is not welcome here. Out of respect for our community members' privacy, any tool posted here must be free to use and must not require a user to make an account or otherwise enter their personal data. If your app doesn't meet those criteria, please go about advertising on Reddit the honest way by paying to run ads. If in doubt, message the mods before posting to be safe.
3. No blogspam.
While not necessarily an issue here in the past, we want to get ahead of potential blogspam. Blogspam is generally defined as posting multiple back-to-back links that take people off of Reddit to content hosted on someone's personal blog, website, or channel. You've probably seen blogspam in other communities, where a handful of users dominate the front page with frequent, repetitive posts meant to drive traffic to their own site, with little to no actual effort to engage with the users here.
Therefore, we ask that posts be more than just a link to your blog. We welcome sharing your build log and build updates, and you may include links to your site within your post, but you must have SOME content in the post itself – pictures, write-ups, and embedded videos are all fair game. We want this to be a community where your content and the discussions around it exist side by side, and avoid becoming just a collection of links to content on other websites.
4. No low-quality or low-effort posts.
No AI, no memes, no exceptions.
Borrowing a guideline from the lovely folks over at /r/flying, please don't just post a picture or video without some context or an attempt to start a discussion. Either in the title or in a top-level comment, tell us why you wanted to share! Maybe you have a story of why you took that picture or you have a question to ask about what you saw. We won't be quite as strict with enforcing this policy as /r/flying, but we ask that posters abide by it as much as possible.
Giving people a reason to interact with your post means more people will vote and comment on it. It's scientifically proven!
5. No non-aviation politics.
While it's easy to just have a blanket ban on ALL politics, it's undeniable that the policies that govern homebuilt aviation are inherently political. It's important to be familiar with these rules when you're dealing with experimental aircraft in any capacity, so please feel free to discuss and debate aviation rules, regulations, and certification here. That said, political discussion must remain on-topic. Talking about an upcoming regulatory change that might affect your project is fine, but ranting about how the people that wrote the new policy are idiots is a quick way to get your post removed.
6. Treat others with respect.
Self-explanatory. Golden rule, people!
r/homebuilt • u/BloomingtonFPV • 5d ago
Oratex resources?
I'm working on my Gaz'aile horizontal stabilator. To save weight (especially in the back) I want to use Oratex. The ribs are foam and covered by 1.6mm plywood. However, the tips are shaped foam covered by 106 g/m² (3.12 oz/yd²) fiberglass and resin. Will the fiberglass protect the foam during the ironing process?
The photos are from the plans; I'm still building my horizontal stab.
r/homebuilt • u/ymc9 • 8d ago
Is Rotax training worth going?
I’m finishing my Vans Rv12iS - Rotax 912iS engine. Just wondering for future routine service and maintenance, is it worth the time and money to attend some official training?
r/homebuilt • u/ToMorrowsEnd • 9d ago
Vans or Viking aircraft. Support if you buy an unfinished kit?
I want to buy either a unfinished RV12 or an unfinished CH650B anyone know if Vans or Viking will give you support if you didnt drop the pile of money with them directly? There are some screaming deals on unfinished kits out there and I am wondering if the makers will treat you as a pariaha and ignore you if you did not buy it new from them.
r/homebuilt • u/Cri_Cri_Mike • 10d ago
Hey all! Question about air filters and solid air flow into the carb. Whats the minimum size an air filter can be? Im working with limited space in my aircraft engine cowling. The smallest I see is a 2”x1.5” sized air filter. But it would be like perfect. The opening for the carb intake is 2.5”
r/homebuilt • u/Fair-Pilot-8847 • 13d ago
Horizontal Stabilizer Finished…Now We Wait | Van's RV-15 Build Episode 26
RV-15 Build Episode 26 — Horizontal Stabilizer Part 2: Now We Wait
Finished up the horizontal stabilizer this week, which wraps up another major piece of the RV-15 empennage.
This is probably going to be the last actual build episode for a few months while I wait for the next kits to start shipping.
So far the completed list now includes:
Wings
Rudder
Vertical stabilizer
Elevators
Horizontal stabilizer
It’s a little strange to finally hit a point where there just isn’t another box of parts sitting there waiting for me.
I’ll still be doing RV-15 updates, shop projects, and other airplane-related content while I wait, but for the actual airplane build itself… now we wait.
Episode 26 is “Now We Wait — RV-15 Horizontal Stabilizer Part 2.”
For the other RV builders here: what did you work on during a long gap between kits?
r/homebuilt • u/gamileon • 15d ago
Dream Tools for First-Time Builder and Tips
I am looking at building my first kit (to be an RV-10).
I have no prior experience with metalworking, but am looking forward to learning.
I do know I will be needing tools for grinding, bending, riveting, etc. What would the best (dream) tools be for building a kit like an RV-10?
Also, what are the best tips you would offer to someone just starting out?
r/homebuilt • u/pattyd700 • 18d ago
Need help identifying.
I am in need of some help trying to identify what model of experimental this is. My grandfather was building it before he passed and sady i do not know much about it other than the engine is a 2180 vw. Any help is greatly appreciated.
r/homebuilt • u/Ramrod489 • 18d ago
Help! Brake Problem Diagnosis
Pic for plane tax
I have a recurring issue with my right brake system. If the plane hasn’t been flown in a while the right brake pedal will go all the way to the bulkhead. When I check the master cylinder, the plunger will be stuck fully depressed. Once un-stuck I can pump the brake up and it feels normal in the first or second pump. I have replaced the master cylinder once and bled the system twice. The master cylinders are on the firewall directly above the MLG strut, so the brake line is entirely vertical, and I always pressure bleed from the caliper, so a bubble is unlikely. I haven’t seen any signs of brake fluid leakage.
Talking to other Canardians, I have narrowed it down to two potential causes:
a transient bubble leaking in from the caliper o-ring that gets pushed out on the first brake application, but the lack of pressure means there’s nothing to push the plunger back up. Solution: rebuild the caliper w/new o-ring (I’m gonna do this anyway).
Upper and lower master cylinder mounts are mid-aligned enough to put weird side loads in the plunger causing it to jam. I think this is unlikely as the system works fine normally (I’ve only ever had the brake fail during pre-flight) and the top of the master cylinder has a guide for the plunger that should eliminate misalignment-induced side-loads.
Not sure how to check this.
Have any if y’all dealt with this? Any other potential causes y’all can think of?
r/homebuilt • u/otto-motto • 19d ago
Murphy Aircraft Shuts Down

https://avbrief.com/murphy-aircraft-insolvent-future-uncertain-for-builder-support/
https://canadianaviator.com/2026/10/27/murphy-aircraft-insolvent/
It's too bad - they had good, rugged designs. The factory equipment was sold off at auction, but hopefully the intellectual property can be picked up by someone who can resurrect the manufacturing.
r/homebuilt • u/inktomi • 19d ago
Feedback on RVBuilders
I had RV Builders assemble my RV-8 fuseloge and wing kits to quick build status. There were a few mistakes and skipped steps leading to my having to replace both these kits.
On the fuselage, they misdrilled longerons leading to the aft skin not lining up and being unable to be riveted in place. There are also misaligned rivets they placed where a similar mistake had been made.
On the wings, it seems like the entire kit was assembled without deburring anything. The edges of ribs and such inside the wing are still sharp to the finger.
I'm uncomfortable flying my plane long term with wings (and probably the fuselage) not being deburred, and I don't want to deal with disassembling the fuseloge to replace the longeron that has been misdrilled. Hence both will be replaced with the old ones scrapped (I'm not interested in selling them due to long term liability).
I just wanted to post in case anyone else has had issues. The folks at RV Builders were nice to work with, and I do admit skipping deburring gets you a plane faster - but it's a required step in the Vans Aircraft builders manual and I'd expect a build shop to do it.
r/homebuilt • u/magnumcar • 19d ago
Aeronca KC 4 1/2” skull cap spinner
Hello! So, I believe I am looking for something non-existent. I would love to find a 4 1/2” skull cap spinner for my wall hanger in the photos. I don’t think they were ever offered for this application, if ever at all. I measured (twice) the area where the cap would sit and is 4 1/2”. I have scoured the web, I can only find 5”, which is too big. Thanks for any help!
r/homebuilt • u/phaeolus97 • 24d ago
Convince me not to put a down payment on a Zenith CH750 Super Cruzer today
Or, buy the rudder kit at least. I posted about the S-21 yesterday, convinced it was my answer for a future float plane, and I'm now almost convinced it's the CH750 Super Cruzer, which I didn't even know about.
The CH750 Super Cruiser has 50% more useful load and half the build time (only 400 hours!). But it is not nearly as good looking as the S-21; it's like an old Volvo. They're boxy but they're safe.
I would want a Rotax 916 either way, which would require a third-party FWF from Skytek in BC but it exists.
Edit: I did it! I mailed my check for the rudder kit and tools today!
r/homebuilt • u/phaeolus97 • 25d ago
Convince me not to put a down payment on a Rans S-21 Outbound today
I live in the Puget Sound area. I've been wanting to build a Kitfox on floats since I was a teenager. But the all-aluminum construction, faster build, cheaper cost, shorter wait-time, and better usable load of the S-21 seems like a no-brainer.
r/homebuilt • u/heftyshoppin • 24d ago
Kitfox aerobatics?
I recently saw a playlist of videos featuring Kyle Franklin’s Oshkosh routine in the Kitfox Speedster and from just a cursory glance it seems like the speedster specifically was designed for the purposes of light “Citabria style” acro. I can’t seem to find anyone that’s actually used one for that aside from Mr Franklin though. Obviously, with a limit load of +5.7/-2.3 it doesn’t qualify for the aerobatic category strictly, but I can’t really see any other reason why they would offer a clipped wing with full span flaperons.
Google says that acro is not recommended for a Kitfox and even the few articles I’ve found say that it’s not endorsed as an acro machine but again, that kinda seems like the whole purpose for its existence so what gives?
r/homebuilt • u/Cri_Cri_Mike • 26d ago
Hey all! Electronics question. I’m wanting to install lights. I was recommended switch breakers. My question is, what amp breaker should I use? What’s the general rule for calculating breaker amps for an electrical component? Thanks!
r/homebuilt • u/mottihoresh • 29d ago
Made a free tool that turns home-cockpit panel designs into laser-ready cut files (one DXF per layer)
galleryr/homebuilt • u/BloomingtonFPV • Oct 11 '26
Vertical Stabilizer installed
My Gaz'aile 2 got its rudder installed and inspected by Atlas the shop cat/FAA inspector.
r/homebuilt • u/epayne78 • Oct 11 '26
Importing a kit to Canada
My boyfriend has purchased a Kitfox and is in the process of working out delivery. We've run into a snag with finding a personal customs broker to be able to get it over the border. What customs brokers have others used? We're in western Canada.
r/homebuilt • u/Catch_0x16 • Oct 08 '26
Rotax 503 failure. Melted piston.
Hello all.
A few days ago I had a forced landing in my Thruster T600N when my 503 went down to one cylinder. I was 550ft AGL doing some sightseeing and when I applied power to climb out, it coughed, wheezed and gave me nothing.
Put it down safely in the perfect farmers field. 8" lush grass with a firm but smooth base of soil beneath; nicer than some runways.
Today I pulled the engine off and started stripping it down. As you can see in the images, the MAG piston is completely cooked. Looks like the flame path melted through the crown to the exhaust port.
I purchased the aircraft a while ago from someone who was attempting to rebuild it. By their own admission they weren't technical and I shouldn't have taken their word for it when they told me the head bolts were torqued down. As I was stripping the aircraft the head bolts were almost only finger tight!
I had been fighting high (but not above max) EGT readings for a while, and I suspect that air had been getting in from under the head and into at least the MAG cylinder.
I'll get the cylinder cleaned up and honed (rebored if necessary, but I think it's all aluminium from the piston, rather than gouges I to the bore). And new pistons. While I'm there I'll rebuild the crankshaft and clean up the crank case (there will be debris in there that will need cleaning, so the crank has to come out either way).
Might also rebuild the B type gearbox while I'm here.
Hope this is of interest to some of you folks flying 503's
r/homebuilt • u/Ewalk02 • Oct 05 '26
Grass strip for RV10
I'm looking at an airpark property that currently has 1500'x60' and 2800'x60' grass strips. The elevation is 1000' and it's in the Midwest. My question is, would you purchase there if you intended to build an RV10 in the future? As far as I can tell it is well maintained.
r/homebuilt • u/Arbalete_rebuilt • Oct 02 '26